Study Of Water Flowrate Using Time Transient And Cross-Correlation Techniques With 82br Radiotracer

This paper aims to determinate the water flowrate using Time Transient and Cross-Correlation techniques. The detection system uses two NaI(Tl) detectors adequately positioned on the outside of pipe and a gamma-ray source (82Br radiotracer). The water flowrate measurements using Time Transient and Cross-Correlation techniques were compared to invasive conventional measurements of the flowmeter previously installed in pipeline. Discrepancies between Time Transient and Cross-Correlation techniques flowrate values were found to be less than 3% in relation to conventional ones.

Impact des techniques de fermeture utérine lors de la césarienne

Contexte: La césarienne est une procédure chirurgicale qui survient dans plus du quart des accouchements en Amérique du Nord. Les techniques chirurgicales de fermeture de l’utérus lors de la césarienne sont variées, influencent la cicatrisation et le risque de complications chez la femme à court et long terme. Il a été suggéré que la fermeture en un plan barré augmentait le risque de rupture de l’utérus et de défaut de cicatrisation de l’utérus. Cependant, en l’absence d’un haut niveau d’évidence, cette technique est toujours pratiquée au Canada et en Amérique du Nord. Objectif: Comparer l’impact des différentes techniques de fermeture de l’utérus lors de la césarienne sur les complications maternelles à court et long terme. Méthode : Trois revues systématiques et méta-analyses d’études observationnelles ou d’essais randomisés contrôlés (ECR) ont été réalisées. La prévalence des défauts de cicatrisation et les issues à court et long terme ont été comparées entre les techniques de fermeture de l’utérus. Par la suite, un essai randomisé contrôlé a évalué trois techniques de fermeture de l’utérus : un plan barré, deux plans barrés et deux plans non barrés excluant la déciduale, chez 81 femmes avec une césarienne primaire élective à ≥ 38 semaines de grossesse. L’épaisseur du myomètre résiduel a été mesurée six mois après la césarienne à l’aide d’une échographie transvaginale et comparée par un test t de Student. Résultats : Les résultats des revues systématiques et méta-analyses ont montré que 37% à 59% des femmes présentaient un défaut de cicatrisation de l’utérus après leur césarienne. Concernant les complications à court terme, les types de fermeture de l’utérus étudiés sont comparables, à l’exception de la fermeture en un plan barré qui est associée à un temps opératoire plus court que celle en deux plans (-6.1 minutes, 95% intervalle de confiance (IC) -8.7 à -3.4, p<0.001). Les fermetures de l’utérus en un plan barré sont associées à plus de risque de rupture utérine qu’une fermeture en deux plans barrés (rapport de cote 4.96; IC 95%: 2.58–9.52, P< 0.001). L’ECR a également démontré que la fermeture de l’utérus en un plan barré était associée à une épaisseur du myomètre résiduel plus mince que la fermeture en deux plans non barrés excluant la déciduale (3.8 ± 1.6 mm vs 6.1 ± 2.2 mm; p< 0.001). Finalement, aucune différence significative n’a été détectée concernant la fréquence des points d’hémostases entre les techniques (p=1.000). Conclusion : Lors d’une césarienne élective primaire à terme, une fermeture en deux plans non barrés est associée à un myomètre plus épais qu’une fermeture en un plan barré, sans augmenter le recours à des points d’hémostase. De plus, il est suggéré que la fermeture en deux plans réduirait le risque de rupture utérine lors d’une prochaine grossesse. Finalement, la fermeture chez les femmes en travail doit être plus étudiée.

Modern Horn Playing in Beethoven: An Exploration of Period Appropriate Techniques for the Orchestral Music of Beethoven for the Modern Horn Player

Thesis (D.M.A.)--University of Washington, 2016-06

Création d’un groupe de soutien au développement de l’identité professionnelle du nouveau personnel enseignant en techniques humaines.

Cette recherche porte sur le thème de l’accompagnement du développement de l’identité professionnelle pour le nouveau personnel enseignant en techniques humaines. Plus précisément, nous voulons mesurer l’impact d’un projet novateur, soit la création d’un groupe de soutien en période d’insertion professionnelle. La problématique s’articule principalement autour du fait que, dans les trois techniques humaines ciblées, les nouveaux professeurs et professeures sont embauchés d’abord et avant tout pour leurs compétences disciplinaires. À leur arrivée au collégial, leur emploi est précaire et leurs tâches morcelées. Malgré le fait qu’ils débutent dans un état d’urgence, cette transition professionnelle semble être laissée pour compte ainsi que le soutien psychologique. Ce contexte, qui favorise l’isolement, influence parfois la motivation à s’engager dans leur deuxième carrière. Au cégep de Sainte-Foy, il n’existe pas de mentorat départemental ni d’accompagnement spécifique. Seul le programme d’accueil et d’intégration offre une série d’activités obligatoires. Le cadre de référence présente deux classifications des besoins du nouveau personnel enseignant au collégial au regard des travaux de Raymond (2001) et Caplan, Clough, Ellis et Muncey (2009). La recension des écrits nous a également permis de distinguer l’insertion, l’identité et le développement professionnels. Les différents dispositifs d’insertion pédagogique des nouveaux enseignants ont également fait l’objet d’une recherche documentaire. Ces assises théoriques ont guidé le choix du développement de notre groupe de soutien sous l’angle d’une communauté d’apprentissage favorisant l’interaction entre pairs. Cet essai poursuit trois objectifs : 1) concevoir le processus d’accompagnement et la trousse éducative pour le groupe de soutien, 2) valider le processus d’accompagnement et la trousse éducative auprès d’un groupe de nouveaux professeurs et professeures provenant des trois techniques humaines et 3) analyser le point de vue de professeurs et professeures par rapport au processus d’accompagnement et à la trousse éducative proposés. Nos objectifs de recherche nécessitaient une méthodologie appropriée. Celleci repose sur une approche méthodologique qualitative, une posture épistémologique interprétative et une recherche de type recherche développement. Dix participantes ont pris part au processus d’accompagnement proposé soit : des entrevues individuelles semi-dirigées et des rencontres de groupe. Les données ont été recueillies grâce à des entrevues semi-dirigées, des rencontres de groupe de discussion, des autoévaluations des participantes ainsi qu’un questionnaire d’évaluation finale. La triangulation des méthodes de collecte de données a été utilisée afin d’assurer la rigueur de nos travaux. L’analyse de contenu s’est faite par l’entremise du logiciel Transana qui a aidé à la transcription des enregistrements, au codage et à la production de rapports synthèse. La dimension éthique a été au coeur de nos préoccupations et nous avons d’ailleurs pris plusieurs précautions à cet effet. Les données obtenues nous ont permis de répondre à notre question de recherche en démontrant que la création du groupe de soutien a eu des retombées positives sur le nouveau personnel enseignant en techniques humaines. Ce nouveau dispositif d’accompagnement a permis de raffiner la classification des besoins de notre cadre de référence. Les catégories émergentes ont révélé des spécificités propres à la deuxième carrière. La formule du groupe de soutien telle que mise à l’essai a, pour sa part, été fortement appréciée des participantes autant pour son fonctionnement que pour son contenu. L’ensemble de ce processus a bonifié la représentation de l’identité professionnelle de Gohier et al. (2001). Les données obtenues nous ont également permis de valider notre cadre d’intervention et de dégager des éléments favorisant la transférabilité des résultats obtenus. Nous pensons d’ailleurs que le groupe de soutien constitue une avenue pertinente et essentielle au sein de la communauté collégiale.

Elaboração e aplicação de um Programa de Treino de Técnica de Pontas para os alunos do 3º ano de Dança, da Academia de Dança do Vale do Sousa, com vista à preparação de Variações de Repertório Clássico

Relatório Final de Estágio apresentado à Escola Superior de Dança, com vista à obtenção do grau de Mestre em Ensino de Dança.

Hybrid Techniques [Review of 5 books]

Abstract not available

The lipid- and lipoprotein- [LDL-Lp(a)] apheresis techniques. Updating

Therapeutic plasmapheresis allows the extracorporeal removal of plasmatic lipoproteins (Lipid-apheresis) (LA). It can be non selective (non specific), semi - selective or selective low density lipoprotein-lipoprotein(a) (specific [LDL- Lp(a)] apheresis) (Lipoprotein apheresis, LDLa). The LDL removal rate is a perfect parameter to assess the system efficiency. Plasma-Exchange (PEX) cannot be considered either specific nor, selective. In PEX the whole blood is separated into plasma and its corpuscular components usually through centrifugation or rather filtration. The corpuscular components mixed with albumin solution plus saline (NaCl 0.9%) solution at 20%-25%, are then reinfused to the patient, to substitute the plasma formerly removed. PEX eliminates atherogenic lipoproteins, but also other essential plasma proteins, such as albumin, immunoglobulins, and hemocoagulatory mediators. Cascade filtration (CF) is a method based on plasma separation and removal of plasma proteins through double filtration. During the CF two hollow–fiber filters with pores of different diameter are used to eliminate the plasma components of different weight and molecular diameter. A CF system uses a first polypropylene filter with 0.55 µm diameter pores and a second one of diacetate of cellulose with 0.02 µm pores. The first filter separates the whole blood, and the plasma is then perfused through a second filter which allows the recovery of molecules with a diameter lower than 0.02 µm, and the removal of molecules larger in diameter as apoB100–containing lipoproteins. Since both albumin and immunoglobulins are not removed, or to a negligible extent, plasma-expanders, substitution fluids, and in particular albumin, as occurs in PEX are not needed. CF however, is characterized by lower selectivity since removes also high density lipoprotein (HDL) particles which have an antiatherogenic activity. In the 80’s, a variation of Lipid-apheresis has been developed which allows the LDL-cholesterol (LDLC) (-61%) and Lp(a) (-60%) removal from plasma through processing 3 liters of filtered plasma by means of lipid-specific thermofiltration, LDL immunoadsorption, heparin-induced LDL precipitation, LDL adsorption through dextran sulphate. More recently (90’s) the DALI®, and the Liposorber D® hemoperfusion systems, effective for apoB100- containing lipoproteins removal have been developed. All the above mentioned systems are established LDL-apheresis techniques referable to the generic definition of LDLa. However, this last definition cannot describe in an appropriate manner the removal of another highly atherogenic lipoprotein particle: the Lp(a). Thus it would be better to refer the above mentioned techniques to the wider scientific and technical concept of lipoprotein apheresis. Lipid apheresis - Lipoprotein apheresis - LDL-apheresis - Severe Dyslipidemia.

La pêche du vivaneau rouge en Guyane. Un bilan de l'exploitation sous le régime vénézuélien, des techniques de capture à adapter et à développer

En Guyane française , le vivaneau rouge (Lutjanus purpureus) est capturé par 3 flottilles, les ligneurs vénézuéliens, les caseyeurs antillais et les chalutiers crevettiers guyanais. Pour les crevettiers, il s'agit d'une capture accessoire inévitable, mais qui ne semble pas sans conséquences, puisque, si l'on tient compte de l'effectif total de la flottille, c'est 1 million à 1.5 millions de juvéniles qui sont pêchés (et souvent rejetés à la mer) annuellement par les crevettiers. Pour les ligneurs vénézuéliens qui pêchent 1200 tonnes, les individus de petite taille sont devenus prépondérants dans leurs captures. Ainsi dans la gamme de taille 20-30cm (125-425 grammes), on est passé, entre 1990 et 1998, de 37 000 poissons débarqués (6% de la capture) à 616 500 poissons (56% de la capture). La taille moyenne du vivaneau rouge débarqué est passée de 45 à 35 cm et son poids moyen de 1600 grammes à 700 grammes. Pour les caseyeurs, seuls deux armements (un du Larivot, l'autre du Robert), nous ont fourni quelques renseignements sur les activités et les débarquements de leurs navires. Les premières observations montrent que la composition de leurs captures en vivaneaux rouges ressemble à celle des ligneurs avec une tendance vers les petites tailles. Cependant cette tendance n'est pas aussi systématique que veulent bien le dire les détracteurs de la nasse à poissons. Leurs débarquements sont composés en nombre, pour moitié, de "vivaneaux tête ronde" (Rhomboplites aurorubens). On notera également que les caseyeurs rentabilisent leurs captures accessoires de mérous sur le marché antillais, alors que les ligneurs les rapatrient vers le Venezuela. Il existe une troisième espèce de vivaneau, le vivaneau rayé, Lutjanus synagris, capturé surtout par les chalutiers.

“Gostei deste livro, porque...” Desenvolvimento da competência literária no 3.º ano de escolaridade

Relatório de estágio apresentado à Escola Superior de Educação de Lisboa para obtenção do grau de mestre em Ensino do 1.º e 2.º Ciclos do Ensino Básico

Detection of mesoscale thermal fronts from 4km data using smoothing techniques: Gradient-based fronts classification and basin scale application

In order to optimize frontal detection in sea surface temperature fields at 4 km resolution, a combined statistical and expert-based approach is applied to test different spatial smoothing of the data prior to the detection process. Fronts are usually detected at 1 km resolution using the histogram-based, single image edge detection (SIED) algorithm developed by Cayula and Cornillon in 1992, with a standard preliminary smoothing using a median filter and a 3 × 3 pixel kernel. Here, detections are performed in three study regions (off Morocco, the Mozambique Channel, and north-western Australia) and across the Indian Ocean basin using the combination of multiple windows (CMW) method developed by Nieto, Demarcq and McClatchie in 2012 which improves on the original Cayula and Cornillon algorithm. Detections at 4 km and 1 km of resolution are compared. Fronts are divided in two intensity classes (“weak” and “strong”) according to their thermal gradient. A preliminary smoothing is applied prior to the detection using different convolutions: three type of filters (median, average and Gaussian) combined with four kernel sizes (3 × 3, 5 × 5, 7 × 7, and 9 × 9 pixels) and three detection window sizes (16 × 16, 24 × 24 and 32 × 32 pixels) to test the effect of these smoothing combinations on reducing the background noise of the data and therefore on improving the frontal detection. The performance of the combinations on 4 km data are evaluated using two criteria: detection efficiency and front length. We find that the optimal combination of preliminary smoothing parameters in enhancing detection efficiency and preserving front length includes a median filter, a 16 × 16 pixel window size, and a 5 × 5 pixel kernel for strong fronts and a 7 × 7 pixel kernel for weak fronts. Results show an improvement in detection performance (from largest to smallest window size) of 71% for strong fronts and 120% for weak fronts. Despite the small window used (16 × 16 pixels), the length of the fronts has been preserved relative to that found with 1 km data. This optimal preliminary smoothing and the CMW detection algorithm on 4 km sea surface temperature data are then used to describe the spatial distribution of the monthly frequencies of occurrence for both strong and weak fronts across the Indian Ocean basin. In general strong fronts are observed in coastal areas whereas weak fronts, with some seasonal exceptions, are mainly located in the open ocean. This study shows that adequate noise reduction done by a preliminary smoothing of the data considerably improves the frontal detection efficiency as well as the global quality of the results. Consequently, the use of 4 km data enables frontal detections similar to 1 km data (using a standard median 3 × 3 convolution) in terms of detectability, length and location. This method, using 4 km data is easily applicable to large regions or at the global scale with far less constraints of data manipulation and processing time relative to 1 km data.

An examination of the techniques used to capture mangrove crabs, Ucides cordatus, in the Mamanguape River estuary, Northeastern Brazil, with implications for management.

The present research, undertaken in a mangrove swamp in northeastern Brazil (Mamanguape River Estuary), examined the factors that led to the overwhelming acceptance of the tangle-netting technique by crab harvesters in detriment to the now illegal tamping technique. Both techniques are the only ones currently used at our study site and in many other areas in Brazil, despite being prohibited by law. Data were collected through direct observations to determine capture efficiency, productivity, daily production, selectivity, and harvesting effort, and through interviews with crab harvesters, focusing on their perceptions of the capture techniques, the conditions of crab stocks and the sales price of a dozen crabs. Our results indicated that the two capture techniques did not significantly differ in terms of their efficiency or productivity, but daily production rates differed significantly, being greater using tangle-netting. The tangle-netting permits a greater harvesting effort (6 hours and 34 min) compared to tamping (4 hours and 19 min). Tangle-netting is also less selective than tamping indicated by the larger number of captured smaller specimens, including females. This results in a lower average sales price for a dozen crabs caught by tangle-netting (US$ 0.95) compared to tamping (US$ 1.02). The greater daily production of crab harvesters using the tangle-netting technique nevertheless increased their net gain, explaining their preference for this method, Given that tangle-netting results in greater harvesting pressure but lower selectivity compared to tamping, it may potentially be less sustainable. All of the crab harvesters interviewed having more than 20 years of experience (n = 34) stated they perceived that stocks of U. cordatus had become reduced over the last 20 years, together with average crab sizes. It is now important to examine the structure of the local U. cordatus population and to assess its fishery to allow evaluating whether the illegal, but prominent tangle-netting and tamping mangrove crab capture techniques are sustainable or not. We further suggest improving the dialogue between decision makers and fishermen, which barely exists to date, to initiate a discussion about possible ways of resolving the current situation of illegality of the fishermen. This will be key to achieving effective sustainable co-management of this important natural mangrove forest resource.

Interaction techniques with novel multimodal feedback for addressing gesture-sensing systems

Users need to be able to address in-air gesture systems, which means finding where to perform gestures and how to direct them towards the intended system. This is necessary for input to be sensed correctly and without unintentionally affecting other systems. This thesis investigates novel interaction techniques which allow users to address gesture systems properly, helping them find where and how to gesture. It also investigates audio, tactile and interactive light displays for multimodal gesture feedback; these can be used by gesture systems with limited output capabilities (like mobile phones and small household controls), allowing the interaction techniques to be used by a variety of device types. It investigates tactile and interactive light displays in greater detail, as these are not as well understood as audio displays. Experiments 1 and 2 explored tactile feedback for gesture systems, comparing an ultrasound haptic display to wearable tactile displays at different body locations and investigating feedback designs. These experiments found that tactile feedback improves the user experience of gesturing by reassuring users that their movements are being sensed. Experiment 3 investigated interactive light displays for gesture systems, finding this novel display type effective for giving feedback and presenting information. It also found that interactive light feedback is enhanced by audio and tactile feedback. These feedback modalities were then used alongside audio feedback in two interaction techniques for addressing gesture systems: sensor strength feedback and rhythmic gestures. Sensor strength feedback is multimodal feedback that tells users how well they can be sensed, encouraging them to find where to gesture through active exploration. Experiment 4 found that they can do this with 51mm accuracy, with combinations of audio and interactive light feedback leading to the best performance. Rhythmic gestures are continuously repeated gesture movements which can be used to direct input. Experiment 5 investigated the usability of this technique, finding that users can match rhythmic gestures well and with ease. Finally, these interaction techniques were combined, resulting in a new single interaction for addressing gesture systems. Using this interaction, users could direct their input with rhythmic gestures while using the sensor strength feedback to find a good location for addressing the system. Experiment 6 studied the effectiveness and usability of this technique, as well as the design space for combining the two types of feedback. It found that this interaction was successful, with users matching 99.9% of rhythmic gestures, with 80mm accuracy from target points. The findings show that gesture systems could successfully use this interaction technique to allow users to address them. Novel design recommendations for using rhythmic gestures and sensor strength feedback were created, informed by the experiment findings.

STRUCTURAL ANALYSIS OF RIBOSOME BINDING ELEMENTS OF THE 3´ UTR IN TWO POSITIVE-STRAND PLANT RNA VIRUSES

Turnip crinkle virus (TCV) and Pea enation mosaic virus (PEMV) are two positive (+)-strand RNA viruses that are used to investigate the regulation of translation and replication due to their small size and simple genomes. Both viruses contain cap-independent translation elements (CITEs) within their 3´ untranslated regions (UTRs) that fold into tRNA-shaped structures (TSS) according to nuclear magnetic resonance and small angle x-ray scattering analysis (TCV) and computational prediction (PEMV). Specifically, the TCV TSS can directly associate with ribosomes and participates in RNA-dependent RNA polymerase (RdRp) binding. The PEMV kissing-loop TSS (kl-TSS) can simultaneously bind to ribosomes and associate with the 5´ UTR of the viral genome. Mutational analysis and chemical structure probing methods provide great insight into the function and secondary structure of the two 3´ CITEs. However, lack of 3-D structural information has limited our understanding of their functional dynamics. Here, I report the folding dynamics for the TCV TSS using optical tweezers (OT), a single molecule technique. My study of the unfolding/folding pathways for the TCV TSS has provided an unexpected unfolding pathway, confirmed the presence of Ψ3 and hairpin elements, and suggested an interconnection between the hairpins and pseudoknots. In addition, this study has demonstrated the importance of the adjacent upstream adenylate-rich sequence for the formation of H4a/Ψ3 along with the contribution of magnesium to the stability of the TCV TSS. In my second project, I report on the structural analysis of the PEMV kl-TSS using NMR and SAXS. This study has re-confirmed the base-pair pattern for the PEMV kl-TSS and the proposed interaction of the PEMV kl-TSS with its interacting partner, hairpin 5H2. The molecular envelope of the kl-TSS built from SAXS analysis suggests the kl-TSS has two functional conformations, one of which has a different shape from the previously predicted tRNA-shaped form. Along with applying biophysical methods to study the structural folding dynamics of RNAs, I have also developed a technique that improves the production of large quantities of recombinant RNAs in vivo for NMR study. In this project, I report using the wild-type and mutant E.coli strains to produce cost-effective, site-specific labeled, recombinant RNAs. This technique was validated with four representative RNAs of different sizes and complexity to produce milligram amounts of RNAs. The benefit of using site-specific labeled RNAs made from E.coli was demonstrated with several NMR techniques.

Protocol to design techniques for implementing software development best practices

Software engineering best practices allow significantly improving the software development. However, the implementation of best practices requires skilled professionals, financial investment and technical support to facilitate implementation and achieve the respective improvement. In this paper we proposes a protocol to design techniques to implement best practices of software engineering. The protocol includes the identification and selection of process to improve, the study of standards and models, identification of best practices associated with the process and the possible implementation techniques. In addition, technical design activities are defined in order to create or adapt the techniques of implementing best practices for software development.

Low-power high-performance SAR ADC design with digital calibration techniques

This dissertation presents the design of three high-performance successive-approximation-register (SAR) analog-to-digital converters (ADCs) using distinct digital background calibration techniques under the framework of a generalized code-domain linear equalizer. These digital calibration techniques effectively and efficiently remove the static mismatch errors in the analog-to-digital (A/D) conversion. They enable aggressive scaling of the capacitive digital-to-analog converter (DAC), which also serves as sampling capacitor, to the kT/C limit. As a result, outstanding conversion linearity, high signal-to-noise ratio (SNR), high conversion speed, robustness, superb energy efficiency, and minimal chip-area are accomplished simultaneously. The first design is a 12-bit 22.5/45-MS/s SAR ADC in 0.13-μm CMOS process. It employs a perturbation-based calibration based on the superposition property of linear systems to digitally correct the capacitor mismatch error in the weighted DAC. With 3.0-mW power dissipation at a 1.2-V power supply and a 22.5-MS/s sample rate, it achieves a 71.1-dB signal-to-noise-plus-distortion ratio (SNDR), and a 94.6-dB spurious free dynamic range (SFDR). At Nyquist frequency, the conversion figure of merit (FoM) is 50.8 fJ/conversion step, the best FoM up to date (2010) for 12-bit ADCs. The SAR ADC core occupies 0.06 mm2, while the estimated area the calibration circuits is 0.03 mm2. The second proposed digital calibration technique is a bit-wise-correlation-based digital calibration. It utilizes the statistical independence of an injected pseudo-random signal and the input signal to correct the DAC mismatch in SAR ADCs. This idea is experimentally verified in a 12-bit 37-MS/s SAR ADC fabricated in 65-nm CMOS implemented by Pingli Huang. This prototype chip achieves a 70.23-dB peak SNDR and an 81.02-dB peak SFDR, while occupying 0.12-mm2 silicon area and dissipating 9.14 mW from a 1.2-V supply with the synthesized digital calibration circuits included. The third work is an 8-bit, 600-MS/s, 10-way time-interleaved SAR ADC array fabricated in 0.13-μm CMOS process. This work employs an adaptive digital equalization approach to calibrate both intra-channel nonlinearities and inter-channel mismatch errors. The prototype chip achieves 47.4-dB SNDR, 63.6-dB SFDR, less than 0.30-LSB differential nonlinearity (DNL), and less than 0.23-LSB integral nonlinearity (INL). The ADC array occupies an active area of 1.35 mm2 and dissipates 30.3 mW, including synthesized digital calibration circuits and an on-chip dual-loop delay-locked loop (DLL) for clock generation and synchronization.