998 resultados para transport practices
Resumo:
The number of persons with visual impairment in Tanzania is estimated to over 1.6 million. About half a million of these persons are children aged 7-13. Only about 1% of these children are enrolled in schools. The special schools and units are too few and in most cases they are far away from the children’s homes. More and more regular schools are enrolling children with visual impairment, but the schools lack financial resources, tactile teaching materials and trained special education teachers. Children with visual impairment enrolled in regular schools seldom get enough support and often fail in examinations. The general aim of this study was to contribute to increased knowledge and understanding about how teachers can change their teaching practices and thus facilitate the learning of children with visual impairment included in regular classrooms as they participate in an action research project. The project was conducted in a primary school in a poor rural region with a high frequency of blindness and visual impairment. The school was poorly resourced and the average number of pupils per class was 90. The teachers who participated in the collaborative action research project were the 14 teachers who taught blind or visually impaired pupils in grades 4 and 6, in total 6 pupils. The action research project was conducted during a period of 6 months and was carried out in five cycles. The teachers were actively involved in all the project activities; identifying challenges, planning solutions, producing teaching materials, reflecting on outcomes, collaborating and evaluating. Empirical data was collected with questionnaires, interviews, observations and focus group discussions. The findings of the study show that the teachers managed to change their teaching practices through systematic reflection, analysis and collaboration. The teachers produced a variety of tactile teaching materials, which facilitated the learning of the pupils with visual impairment. The pupils learned better and felt more included in the regular classes. The teachers gained new knowledge and skills. They grew professionally and started to collaborate with each other. The study contributes to new knowledge of how collaborative action research can be conducted in the area of special education in a Tanzanian school context. The study has also relevance to the planning of school-based professional development programs and teacher education programs in Tanzania and in other low-income countries. The results also point at strategies which can promote inclusion of children with disabilities in regular schools.
Resumo:
The report 'Conditions and practices in the commercialisation of innovation in wood industry' has been written as a part of the Wood Academy project. The report analyses the commercialisation conditions and practices of wood industry by utilising product categorisation based on a conceptual schema which combines the aspects of the transfer of the procession of utility and the degree of form/service utility (or value-added) created or provided by the company. Open innovation approaches help to perceive the possible new product and service innovations as well as the new business models and earning logics in the industry. The report also contains brief company cases to demonstrate theory-to-practice and showcase company examples from successful Finnish companies.
Resumo:
TIIVISTELMÄ Lappeenrannan teknillinen yliopisto Konetekniikan koulutusohjelma Voitto Kettunen Konepajan hitsaustuotannon kehittäminen kattavien laatuvaatimusten mukaiseksi Diplomityö 2015 167 sivua, 39 kuvaa, 26 taulukkoa ja 3 liitettä Tarkastajat: Professori Jukka Martikainen DI Pertti Kaarre Hakusanat: hitsaus, hitsauksen laatu, konepajan laadunhallinta, kattavat laatuvaatimukset, ISO 9001, ISO 3834, EN 1090 Keywords: welding, quality of welding, engineering workshop quality management, comprehensive quality requirements, ISO 9001, ISO 3834, EN 1090 Hitsaamalla liitetyt teräksiset rakenteet muodostavat ylivoimaisesti suurimman osan konepajatuotannosta. Niihin kuuluu esimerkiksi ajoneuvoja, koneita, laitteita, säiliöitä, siiloja, siltoja, mastoja, piippuja, tukirakenteita ja rakennusten runkoja. Tämän diplomityön tavoitteena on kehittää konepajan laadunhallinta sellaiseksi, että se mahdollistaa kattavien laatuvaatimusten täyttämisen hitsaustuotannossa. Laatuvaatimusten täyttämiseen pyritään käyttämällä hitsaustoimintojen standardia EN ISO 3834-2 sekä kantavien teräsrakenteiden standardeja EN 1090-1 ja EN 1090-2. Teräsrakenteiden suunnittelua ohjaa EN 1993 ja niiden toiminnallisia ominaisuuksia tuotestandardit, kuten terässavupiippu- ja säiliöstandardit. Kantavien teräsrakenteiden suunnittelua ja tuotantoa ohjaa myös seuraamusluokan CC, käyttöluokan SC ja tuotantoluokan PC kautta määräytyvä toteutusluokka EXC. Aikaisempaa enemmän tullaan panostamaan esimerkiksi asiakirjojen sähköiseen hallintaan, raaka-aineiden jäljitettävyyteen tuotteeseen, särmien ja kulmien muotoiluun, pintojen käsittelyyn, hitsien tarkastukseen, hitsaushenkilöstön pätevyyteen ja hitsaustuotannon tehokkuuteen. Saarijärven Säiliövalmiste Oy:n hitsauksen laadunhallinta sertifioitiin standardin ISO 3834-2 mukaan ja kantavien teräsrakenteiden FPC-järjestelmä standardisarjaa EN 1090 noudattaen. Samalla tehtiin päivitys laadunhallintajärjestelmään ISO 9001. Toteutus, joka tehtiin sovitussa aikataulussa, haastaa jokaisen toimijan konepajassa toiminnan, tuotannon ja tuotteiden laadun kehittämiseen uusia käytänteitä ja menetelmiä soveltaen. Kehitystoimien tuloksena toiminta on selkeämpää, ennakoitavampaa ja hallitumpaa, mikä lisää yrityksen toiminnan tuottavuutta ja kannattavuutta. Sertifioidut laatujärjestelmät ovat myötävaikuttaneet tilausten lisääntymiseen yrityksen kaikkien tuotteiden osalta.
Resumo:
Demand forecasting is one of the fundamental managerial tasks. Most companies do not know their future demands, so they have to make plans based on demand forecasts. The literature offers many methods and approaches for producing forecasts. Former literature points out that even though many forecasting methods and approaches are available, selecting a suitable approach and implementing and managing it is a complex cross-functional matter. However, it’s relatively rare that researches are focused on the differences in forecasting between consumer and industrial companies. The aim of this thesis is to investigate the potential of improving demand forecasting practices for B2B and B2C sectors in the global supply chains. Business to business (B2B) sector produces products for other manufacturing companies. On the other hand, consumer (B2C) sector provides goods for individual buyers. Usually industrial sector have a lower number of customers and closer relationships with them. The research questions of this thesis are: 1) What are the main differences and similarities in demand planning between B2B and B2C sectors? 2) How the forecast performance for industrial and consumer companies can be improved? The main methodological approach in this study is design science, where the main objective is to develop tentative solutions to real-life problems. The research data has been collected from a case company. Evaluation and improving in organizing demand forecasting can be found in three interlinked areas: 1) demand planning operational environment, 2) demand forecasting techniques, 3) demand information sharing scenarios. In this research current B2B and B2C demand practices are presented with further comparison between those two sectors. It was found that B2B and B2C sectors have significant differences in demand practices. This research partly filled the theoretical gap in understanding the difference in forecasting in consumer and industrial sectors. In all these areas, examples of managerial problems are described, and approaches for mitigating these problems are outlined.
Resumo:
Mitochondrial ion transport, oxidative phosphorylation, redox balance, and physical integrity are key factors in tissue survival following potentially damaging conditions such as ischemia/reperfusion. Recent research has demonstrated that pharmacologically activated inner mitochondrial membrane ATP-sensitive K+ channels (mitoK ATP) are strongly cardioprotective under these conditions. Furthermore, mitoK ATP are physiologically activated during ischemic preconditioning, a procedure which protects against ischemic damage. In this review, we discuss mechanisms by which mitoK ATP may be activated during preconditioning and the mitochondrial and cellular consequences of this activation, focusing on end-effects which may promote ischemic protection. These effects include decreased loss of tissue ATP through reverse activity of ATP synthase due to increased mitochondrial matrix volumes and lower transport of adenine nucleotides into the matrix. MitoK ATP also decreases the release of mitochondrial reactive oxygen species by promoting mild uncoupling in concert with K+/H+ exchange. Finally, mitoK ATP activity may inhibit mitochondrial Ca2+ uptake during ischemia, which, together with decreased reactive oxygen release, can prevent mitochondrial permeability transition, loss of organelle function, and loss of physical integrity. We discuss how mitochondrial redox status, K+ transport, Ca2+ transport, and permeability transitions are interrelated during ischemia/reperfusion and are determinant factors regarding the extent of tissue damage.
Resumo:
We determined whether over-expression of one of the three genes involved in reverse cholesterol transport, apolipoprotein (apo) AI, lecithin-cholesterol acyl transferase (LCAT) and cholesteryl ester transfer protein (CETP), or of their combinations influenced the development of diet-induced atherosclerosis. Eight genotypic groups of mice were studied (AI, LCAT, CETP, LCAT/AI, CETP/AI, LCAT/CETP, LCAT/AI/CETP, and non-transgenic) after four months on an atherogenic diet. The extent of atherosclerosis was assessed by morphometric analysis of lipid-stained areas in the aortic roots. The relative influence (R²) of genotype, sex, total cholesterol, and its main sub-fraction levels on atherosclerotic lesion size was determined by multiple linear regression analysis. Whereas apo AI (R² = 0.22, P < 0.001) and CETP (R² = 0.13, P < 0.01) expression reduced lesion size, the LCAT (R² = 0.16, P < 0.005) and LCAT/AI (R² = 0.13, P < 0.003) genotypes had the opposite effect. Logistic regression analysis revealed that the risk of developing atherosclerotic lesions greater than the 50th percentile was 4.3-fold lower for the apo AI transgenic mice than for non-transgenic mice, and was 3.0-fold lower for male than for female mice. These results show that apo AI overexpression decreased the risk of developing large atherosclerotic lesions but was not sufficient to reduce the atherogenic effect of LCAT when both transgenes were co-expressed. On the other hand, CETP expression was sufficient to eliminate the deleterious effect of LCAT and LCAT/AI overexpression. Therefore, increasing each step of the reverse cholesterol transport per se does not necessarily imply protection against atherosclerosis while CETP expression can change specific athero genic scenarios.
Resumo:
SStrong evidence suggests that the climate is changing and that these changes are largely caused by human activities. A consensus exists among researchers that human activity is causing global warming and that actions to mitigate global warming need to be taken swiftly. The transportation sector, which relies heavily on fossil fuel burning and primarily oil, is one of the big contributors to air pollution problems at local, regional and global levels. It is the fastest growing source of greenhouse gas emissions and is estimated to be responsible for nearly a quarter of global energyrelated carbon dioxide emissions. Car sharing is a mobility solution encouraging its users to decrease private car usage in favour of communal transit and environmental goals. The idea of car sharing originates from the aspiration to decrease personal car ownership and to reduce vehicle distance travelled. This thesis seeks to complement the understanding of Finnish car sharing users and their usage through better categorization. Through better categorization and segmentation of Finnish car sharing users the thesis seeks to provide information for improved marketing insight. Research is done on the demographic and behavioural characteristics of Finnish car sharing users and they are compared with international findings about the characteristics of International car sharing users. The main research problem is Are Finnish car sharing users similar to international ones? A theoretical research framework on the determinants of individual car sharing usage is built based on international research about demographic and behaviouristic characteristics. After this a quantitative survey is performed to the customers of a Finnish car sharing organization. The data analysed in the thesis consist out of 532 answers received from the car sharing organizations customers. The data is analysed with descriptive and other exploratory methods, which create an understanding of Finnish car sharing users. At the end of the analysis the demographic and behavioural characteristics of Finnish car sharing users are compared with international ones. The research findings of the thesis indicate that the demographic and behavioural characteristics of Finnish car sharing usage largely follow those of their international counterparts. Thanks to the thesis results the car sharing organization is able to better target their customers through improved marketing insight.
Resumo:
Suomen metsäteollisuus elää voimakasta uusiutumis- ja murrosvaihetta, joka ilmenee muutoksina yksittäisten tehtaiden ja tehdasintegraattien toiminnassa. Monia yksikköjä on poistunut tuotannosta ja tuotannon painotusta on muutettu. Toisaalta metsäteollisuus on suuntaamassa uusille aloille, jolloin tuotteina voivat olla esimerkiksi erilaiset biopolttoaineet, kemianteollisuuden raaka-aineet ja uuden sukupolven paperi- ja kartonkituotteet. Metsäteollisuuden muuttuminen ja laitosten monimutkaistuminen sekä jatkuvasti lisääntyvä tiedontarve asettavat yhä suurempia vaatimuksia sekä toiminnanharjoittajien ympäristövastaaville että viranomaisille. Hallinnon jatkuva muutos ja niukkenevat voimavarat voivat johtaa siihen, että käytännön lupa- ja valvontatyöhön jää yhä vähemmän aikaa. Kaakkois-Suomen ELY-keskuksen koordinoima hanke ”Metsäteollisuuden ympäristöstrategia vuoteen 2020 - hallinnon näkökulma” pyrkii vastaamaan edellä mainittuihin haasteisiin strategiatyön avulla. Hankkeen tarkoituksena oli tarkastella metsäteollisuuden ympäristönäkökohtia niistä lähtökohdista, joihin yritys voi vaikuttaa raaka-aineen tulosta tehtaalle ja tuotteen lähdöstä tehtaalta sekä tehtaan perustamisesta sulkemiseen ja jälkihoitoon asti. Tavoitteena oli määritellä toiminnoille toimiva ympäristöstrategia. Strategiassa pyrittiin löytämään yhteisymmärrys toiminnanharjoittajan ja viranomaisen kanssa mm. siitä, miten otetaan käyttöön parhaat käytännöt niin teollisuudessa kuin hallinnossakin, toimitaan uusien BAT-, IED- ja vesienhoitoperiaatteiden mukaisesti sekä edistetään kestävän kehityksen mukaisten tuotteiden markkinoille tuloa ja otetaan ennakointi tavaksi -lähtökohta käyttöön kaikessa toiminnassa. Hanketyössä esille nousseet haasteet ryhmiteltiin aihelueittain kolmeksi pääkohdaksi tärkeysjärjestyksessä: viranomaisen ja teollisuuden tiedonkulun ja tietämyksen parantaminen, lupa-, valvonta- ja hallintoprosessien parantaminen sekä uusien haasteiden kartoittaminen ja niihin reagointi. Haasteiden ratkaisukeinoiksi etsittiin käytännön toimenpiteitä sekä määriteltiin niille vastuutahot. Toimenpiteiksi esitettiin mm. viranomaisen ja teollisuuden yhteisiä koulutuspäiviä, asiantuntijapaneelin perustamista sekä lupamääräysten antamista myös tehtaan tai tuotantoyksikön sulkemisen tai muuttamisen varalle. Riittävien resurssien ja tietotaidon turvaaminen niin hallinnossa kuin teollisuudessa on ehdoton edellytys toimenpiteiden onnistumiselle
Resumo:
Lipid transport in arthropods is achieved by highly specialized lipoproteins, which resemble those described in vertebrate blood. Here we describe purification and characterization of the lipid-apolipoprotein complex, lipophorin (Lp), from adults and larvae of the cowpea weevil Callosobruchus maculatus. We also describe the Lp-mediated lipid transfer to developing oocytes. Lps were isolated from homogenates of C. maculatus larvae and adults by potassio bromide gradient and characterized with respect to physicochemical properties and lipid content. The weevil Lp (465 kDa) and larval Lp (585 kDa), with hydrated densities of 1.22 and 1.14 g/mL, contained 34 and 56% lipids and 9 and 7% carbohydrates, respectively. In both Lps, mannose was the predominant monosaccharide detected by paper chromatography. SDS-PAGE revealed two apolipoproteins in each Lp with molecular masses of 225 kDa (apolipoprotein-I) and 79 kDa (apolipoprotein-II). The lipids were extracted and analyzed by thin-layer chromatography. The major phospholipids found were phosphatidylserine, phosphatidylcholine and phosphatidylethanolamine in adult Lp, and phosphatidylcholine, phosphatidylethanolamine and sphingomyelin in larval Lp. Hydrocarbons, fatty acids and triacylglycerol were the major neutral lipids found in both Lps. Lps labeled in the protein moiety with radioactive iodine (125I-iodine) or in the lipid moiety with fluorescent lipids revealed direct evidence of endocytic uptake of Lps in live oocytes of C. maculatus.
Resumo:
Drug management of hypertension has been a noticeable example of the influence of the pharmaceutical industry on prescription practices. The worldwide leading brands of blood pressure-lowering agents are angiotensin receptor-blocking agents, although they are considered to be simply substitutes of angiotensin-converting enzyme (ACE) inhibitors. Commercial strategies have been based on the results of clinical trials sponsored by drug companies. Most of them presented distortions in their planning, presentation or interpretation that favored the drugs from the sponsor, i.e., corporate bias. Atenolol, an ineffective blood pressure agent in elderly individuals, was the comparator drug in several trials. In a re-analysis of the INSIGHT trial, deaths appeared to have been counted twice. The LIFE trial appears in the title of more than 120 reproductions of the main and flawed trial, as a massive strategy of scientific marketing. Most guidelines have incorporated the corporate bias from the original studies, and the evidence from better designed studies, such as the ALLHAT trial, have been largely ignored. In trials published recently corporate influences have touched on ethical limits. In the ADVANCE trial, elderly patients with type 2 diabetes and cardiovascular disease or risk factors, allocated to placebo, were not allowed to use diuretic and full doses of an ACE inhibitor, despite the sound evidence of benefit demonstrated in previous trials. As a consequence, they had a 14% higher mortality rate than the participants allocated to the active treatment arm. This reality should be modified immediately, and a greater independence of the academy from the pharmaceutical industry is necessary.
Resumo:
Preimplantation genetic diagnosis (PGD) was originally developed to diagnose embryo-related genetic abnormalities for couples who present a high risk of a specific inherited disorder. Because this technology involves embryo selection, the medical, bioethical, and legal implications of the technique have been debated, particularly when it is used to select features that are not related to serious diseases. Although several initiatives have attempted to achieve regulatory harmonization, the diversity of healthcare services available and the presence of cultural differences have hampered attempts to achieve this goal. Thus, in different countries, the provision of PGD and regulatory frameworks reflect the perceptions of scientific groups, legislators, and society regarding this technology. In Brazil, several texts have been analyzed by the National Congress to regulate the use of assisted reproduction technologies. Legislative debates, however, are not conclusive, and limited information has been published on how PGD is specifically regulated. The country requires the development of new regulatory standards to ensure adequate access to this technology and to guarantee its safe practice. This study examined official documents published on PGD regulation in Brazil and demonstrated how little direct oversight of PGD currently exists. It provides relevant information to encourage reflection on a particular regulation model in a Brazilian context, and should serve as part of the basis to enable further reform of the clinical practice of PGD in the country.
Resumo:
As it is a common observation that obesity tends to occur after discontinuation of exercise, we investigated how white adipocytes isolated from the periepididymal fat of animals with interrupted physical training transport and oxidize glucose, and whether these adaptations support the weight regain seen after 4 weeks of physical detraining. Male Wistar rats (45 days old, weighing 200 g) were divided into two groups (n=10): group D (detrained), trained for 8 weeks and detrained for 4 weeks; and group S (sedentary). The physical exercise was carried out on a treadmill for 60 min/day, 5 days/week for 8 weeks, at 50-60% of the maximum running capacity. After the training protocol, adipocytes isolated from the periepididymal adipose tissue were submitted to glucose uptake and oxidation tests. Adipocytes from detrained animals increased their glucose uptake capacity by 18.5% compared with those from sedentary animals (P<0.05). The same cells also showed a greater glucose oxidation capacity in response to insulin stimulation (34.55%) compared with those from the S group (P<0.05). We hypothesize that, owing to the more intense glucose entrance into adipose cells from detrained rats, more substrate became available for triacylglycerol synthesis. Furthermore, this increased glucose oxidation rate allowed an increase in energy supply for triacylglycerol synthesis. Thus, physical detraining might play a role as a possible obesogenic factor for increasing glucose uptake and oxidation by adipocytes.
Resumo:
Transportation plays a major role in the gross domestic product of various nations. There are, however, many obstacles hindering the transportation sector. Cost-efficiency along with proper delivery times, high frequency and reliability are not a straightforward task. Furthermore, environmental friendliness has increased the importance of the whole transportation sector. This development will change roles inside the transportation sector. Even now, but especially in the future, decisions regarding the transportation sector will be partly based on emission levels and other externalities originating from transportation in addition to pure transportation costs. There are different factors, which could have an impact on the transportation sector. IMO’s sulphur regulation is estimated to increase the costs of short sea shipping in the Baltic Sea. Price development of energy could change the roles of different transport modes. Higher awareness of the environmental impacts originating from transportation could also have an impact on the price level of more polluting transport modes. According to earlier research, increased inland transportation, modal shift and slowsteaming can be possible results of these changes in the transportation sector. Possible changes in the transportation sector and ways to settle potential obstacles are studied in this dissertation. Furthermore, means to improve cost-efficiency and to decrease environmental impacts originating from transportation are researched. Hypothetical Finnish dry port network and Rail Baltica transport corridor are studied in this dissertation. Benefits and disadvantages are studied with different methodologies. These include gravitational models, which were optimized with linear integer programming, discrete-event and system dynamics simulation, an interview study and a case study. Geographical focus is on the Baltic Sea Region, but the results can be adapted to other geographical locations with discretion. Results indicate that the dry port concept has benefits, but optimization regarding the location and the amount of dry ports plays an important role. In addition, the utilization of dry ports for freight transportation should be carefully operated, since only a certain amount of total freight volume can be cost-efficiently transported through dry ports. If dry ports are created and located without proper planning, they could actually increase transportation costs and delivery times of the whole transportation system. With an optimized dry port network, transportation costs can be lowered in Finland with three to five dry ports. Environmental impacts can be lowered with up to nine dry ports. If more dry ports are added to the system, the benefits become very minor, i.e. payback time of investments becomes extremely long. Furthermore, dry port network could support major transport corridors such as Rail Baltica. Based on an analysis of statistics and interview study, there could be enough freight volume available for Rail Baltica, especially, if North-West Russia is part of the Northern end of the corridor. Transit traffic to and from Russia (especially through the Baltic States) plays a large role. It could be possible to increase transit traffic through Finland by connecting the potential Finnish dry port network and the studied transport corridor. Additionally, sulphur emission regulation is assumed to increase the attractiveness of Rail Baltica in the year 2015. Part of the transit traffic could be rerouted along Rail Baltica instead of the Baltic Sea, since the price level of sea transport could increase due to the sulphur regulation. Both, the hypothetical Finnish dry port network and Rail Baltica transport corridor could benefit each other. The dry port network could gain more market share from Russia, but also from Central Europe, which is the other end of Rail Baltica. In addition, further Eastern countries could also be connected to achieve higher potential freight volume by rail.
Resumo:
Purpose of this study is to clarify the industrial solutions purchasing process from purchaser companies’ point of view. Also customer’s view on value generating aspects and difficulties in purchases will be discussed as well as different purchas-ing entities where customers have ended up in their solution purchases. Current solution literature is mainly concentrated in supplier views and customer perspec-tive has been left without adequate attention. However, knowledge of the customer and the identification of customer need are at the core of a successful solution business. The focus of this thesis is on Finnish companies’ solution purchases that have been realized during last five years. Industrial solutions in this case are facto-ries or other large industrial plants. Industrial solutions’ purchasing process will be opened all the way from discovering the need until the start-up of the plant. Of in-terest is the customer experience of the success of the acquisition and the pur-chaser’s view on good practices allowing a successful procurement project.