Estudo do defeito de ligação da asa em louça de porcelana

Este relatório descreve o trabalho realizado durante um estágio na empresa Vista Alegre Atlantis. Neste estágio, propunha-se diminuir ou eliminar um problema, um defeito observado como a asa descolada numa chávena de porcelana. Através do estudo das fases do processo de fabrico das chávenas, que se focou na conformação das asas e na secagem, concluiu-se que se tratava de um problema na conformação, relacionado com as propriedades da pasta utilizada para a conformação, recorrendo-se a uma pasta de porcelana com propriedades diferentes. Neste trabalho é apresentado o problema em estudo, o material (a porcelana), incluindo as suas propriedades, as matérias-primas e os processos utilizados para produzir as peças estudadas. Apresentam-se os procedimentos usados para estudar o material e o problema, os resultados obtidos e as conclusões tiradas da discussão dos dados e observações. Adicionalmente, é apresentado trabalho relevante efetuado durante o estágio, em especial aquele relacionado com as chávenas de porcelana.

Does Fumigation of Durum Wheat and Semolina with Sulfuryl Fluoride affect Quality of the Grain, Semolina and derived Spaghetti and Bread?

There is no information on the effect of sulfuryl fluoride (SF) on durum wheat technological properties and products made from fumigated durum wheat. Durum wheat and semolina were exposed to a range of SF applications under conditions that might be typically encountered in bulk storage facilities used in many countries. SF greatly reduced the germination percentage of fumigated durum wheat with increasing impact under higher SF concentration, grain moisture content, and fumigation temperature. SF greatly reduced seed germination percentage impacting more the higher the SF concentration. SF had little to no effects on grain test weight, 1000 grain weight, hardness, protein content, semolina ash content and mixograph properties. At the highest SF concentration (31.25 mg/L for 48 h) there was a tendency for pasta cooking loss to be increased but still acceptable while other pasta properties were largely unaffected. Fumigation with SF did not have any impact on the baking properties of a wholemeal durum flour-commercial flour mix. Therefore, SF is not recommended if the grains are to be used as seeds for agricultural production but for the production of semolina, pasta and bread, SF used under typical fumigation conditions has little to no impact on technological properties of durum wheat.

Scaffolds porosos à base de fosfatos de cálcio para regeneração óssea

Graças ao aumento da esperança média de vida do ser humano, a engenharia de tecidos tem sido uma área alvo de enorme investigação. A utilização de estruturas tridimensionais porosas e biodegradáveis, denominadas de scaffolds, como matriz para a adesão e proliferação celular tem sido amplamente investigada. Existem atualmente diversas técnicas para a produção destas estruturas mas o grau de exigência tem vindo a aumentar, existindo ainda lacunas que necessitam ser preenchidas. A técnica de robocasting consiste numa deposição camada a camada de uma pasta coloidal, seguindo um modelo computorizado (CAD) e permite a produção de scaffolds com porosidade tamanho de poro e fração de porosidade controlados, boa reprodutibilidade, e com formas variadas, as quais podem ser idênticas às dos defeitos ósseos a preencher. O presente estudo teve como objetivo produzir scaffolds porosos à base de fosfatos de cálcio através de robocasting. Para tal, foram estudadas duas composições de pós à base de β-TCP, uma pura e outra co-dopada com estrôncio, zinco e manganês. Inicialmente os pós foram sintetizados pelo método de precipitação química por via húmida. Após a síntese, estes foram filtrados, secos, calcinados a 1000ºC e posteriormente moídos até possuírem um tamanho médio de partícula de cerca de 1,5 μm. Os pós foram depois peneirados com uma malha de 40μm e caracterizados. Posteriormente foram preparadas várias suspensões e avaliado o seu comportamento reológico, utilizando Targon 1128 como dispersante, Hidroxipropilmetilcelulose (HPMC) como ligante e polietilenimina (PEI) como agente floculante. Por fim, e escolhida a melhor composição para a formação da pasta, foram produzidos scaffolds com diferentes porosidades, num equipamento de deposição robótica (3D Inks, LLC). Os scaffolds obtidos foram secos à temperatura ambiente durante 48 horas, sinterizados a 1100ºC e posteriormente caracterizados por microscopia eletrónica de varrimento (SEM), avaliação dos tamanhos de poro, porosidade total e testes mecânicos. Ambas as composições estudadas puderam ser transformadas em pastas extrudíveis, mas a pasta da composição pura apresentou uma consistência mais próxima do ideal, tendo originado scaffolds de melhor qualidade em termos de microestrutura e de propriedades mecânicas.

Avaliação nutricional de estudantes do Instituto Politécnico de Santarém

O estudo apresentado avaliou a adequabilidade da ingesta de nutrientes e energia de estudantes do Instituto Politécnico de Santarém (IPS), através do preenchimento de um relatório alimentar de 24 horas, preenchido on line. Foram obtidas 103 respostas válidas para avaliação, maioritariamente do género feminino (77%), com uma idade média de 21 anos e valores de IMC normoponderais (78%). Cerca de metade dos participantes apresentou um estilo de vida sedentário. No geral, a alimentação caracterizou-se por elevados consumos de arroz, massa, batatas ou cereais de pequeno-almoço, de carne ou ovos, e consumos reduzidos de peixe, leguminosas e hortícolas crus ou cozinhados. O consumo de frutos e vegetais foi maioritariamente inferior ao recomendado, assim como a ingesta de energia e fibra. Ao contrário, a ingesta de lípidos totais e lípidos saturados foi superior ao recomendado na maioria dos participantes. A prevalência de inadequação de micronutrientes como cálcio, vitamina A, vitamina C e folatos foi próxima dos 50% ou superior. Perante os dados obtidos sugere-se uma melhoria dos hábitos alimentares e de estilo de vida, nomeadamente, o aumento do número de refeições realizadas, o aumento do consumo de frutos, hortícolas e leguminosas e o aumento da prática de atividade física.

Farmers’ Market Nutrition Program Recipe Cards

These are cards giving recipes for fruit and vegetable dishes. Recipes include: confetti bean salsa, Mediterranean quinoa salad, minty watermelon cucumber salad, quick refrigerator pickles, broccoli salad, apple, cranberry and almond coleslaw, farmers’ market pasta salad, roasted beet and butter bean hummus, spinach and strawberry pecan salad, okra, avocado and tomato salad, plum-berry mint smoothie and crispy baked vegetables.

Estudo das propriedades físico-químicas do queijo Serra da Estrela

O objetivo deste trabalho foi avaliar as características físicas e químicas de queijo Serra da Estrela de pasta semi mole e correlacionar estes resultados com os resultados da análise sensorial. Foram alvo de estudo 29 amostras de queijo Serra da Estrela produzidas com 6 ecótipos de cardo diferentes. Os queijos foram produzidos em várias queijarias da região demarcada para a produção do queijo Serra da Estrela, mais propriamente dos concelhos de Penalva do Castelo, Oliveira do Hospital e Fornos de Algodres. Procedeu-se à avaliação das propriedades químicas como a humidade, o pH, cloretos, cinzas e proteínas, de propriedades físicas, como a textura e a cor e uma avaliação sensorial. Dos resultados obtidos foi possível verificar que os valores da humidade variaram entre 34, 9% e 49,8%. As cinzas e a proteína encontram-se abaixo dos valores na literatura (3,4%–5,5% e 13,0%–21,9%, respetivamente). Os cloretos variaram entre 1,1% e 3,0% e o pH entre 4,8 e 5,7. Verificou-se que com mais dias de maturação, e portanto menor humidade, as amostras apresentam, maior firmeza, menos adesividade e menos pegamento da pasta. Os valores da dureza da casca e da pasta variam entre 1,56N e 9,40N e 0,4 N e 3,4 N, respetivamente. A adesividade é bastante elevada (de -26,29 N.sec a -2,21 N.sec), o que traduz o caráter amanteigado destes queijos. Nas coordenadas de cor os valores de L* variaram entre 53,57 a 64,34, os de a* entre -4,53 e 1,29 e os de b* entre 15,56 e 29,03, revelando uma cor amarelada. Os resultados da análise sensorial não apresentam grande variabilidade entre os diferentes ecótipos e verificou-se que, em geral, as análises instrumentais realizadas acabaram por confirmar a percepção dos provadores.

Production of bioplastics from hydrolysates of paper industry by Haloferax mediterranei

The biorefinery concept has attracted much attention over the last decade due to increasing concerns about the use of fossil resources. In this context emerged the use of bioplastics, namely polyhydroxyalkanoates (PHA). PHA are biocompatible and biodegradable plastics that can be obtained from renewable raw materials and can constitute an alternative solution to conventional plastics. In this work, hydrolysed cellulose pulp, coming from Eucalyptus globulus wood cooking, was used as substrate to the PHA-storing bacteria Haloferax mediterranei. The hydrolysed pulp is rich in simple sugars, mainly glucose (81.96 g.L-1) and xylose (20.90 g.L-1). Tests were made in defined medium with glucose and xylose and in hydrolysate supplemented with salts and yeast extract. Different concentrations of glucose were tested, namely 10, 15, 20, 30 and 40 g.L-1. The best accumulation results (27.1 % of PHA) were obtained in hydrolysate medium with 10 g.L-1. Using this concentration, assays were performed in fed-batch and sequencing batch reactor conditions in order to determine the best feeding strategy. The strategy that led to the best results was fed-batch assay with 24.7 % of PHA. An assay without sterile conditions was performed, in which was obtained the same growth than in sterilization test. Finally it was performed an assay in a bioreactor and a fast growth (0.14 h-1) with high glucose and xylose consumption rates (0.368 g.L-1.h-1 and 0.0947 g.L-1.h-1, respectively) were obtained. However 1.50 g.L-1 of PHA, corresponding to 16.1 % (92.52 % of 3HB and 3HV of 7.48 %) of % PHA were observed. The polymer was further characterized by DSC with a glass transition temperature of -6.07 °C, a melting temperature of 156.3 °C and a melting enthalpy of 63.07 J.g-1, values that are in accordance with the literature. This work recognizes for the first time the suitability of the pulp paper hydrolysate as a substrate for PHA production by H. mediterranei.

Optimization of heterotrophic feeding of the soft coral Sarcophyton cf. glaucum

Heterotrophic feeding has an important role in the processes of growth and reproduction of mixotrophic corals. The soft coral Sarcophyton cf. glaucum is a good candidate for aquaculture due to its economic interest for the marine aquarium trade and for the bioprospection of marine natural products. The lack of information on heterotrophic feeding of this species with preserved microalgae conducted to development of this work. The present study aimed to evaluate the effect of the conservation processes of microalgae in its suitability as heterotrophic feeding for the mixotrophic coral S. cf. glaucum. Additionally, we aimed to identify the most suitable freeze-dried microalgae species and cell density to be employed in the culture of this mixotrophic coral species. Two experiments were performed: in the first experiment the microalgae Nannochloropsis oculata was supplied to coral fragments in three different preservation forms (live paste, frozen and freeze-dried) at the concentration of 106 cell mL-1; in the second experiment three different microalgae species (Nannochloropsis oculata, Isochrysis galbana and Phaeodactylum tricornutum) were tested in two different amounts: 7.33 mg L-1 (corresponding to the concentration of 106 cell mL-1 of Nannochloropsis oculata) and 3.66 mg L-1. Growth rate, survival, organic weight and photobiology of coral fragments, as well as water quality in culture tanks, were evaluated in both experiments. Preserved forms of microalgae did not demonstrated differences in growth rate, organic weight and survival rate of coral fragments, but affected water quality. Freeze-dried microalgae seems to be a good feed supply for coral aquaculture, as it has the best results and it has the higher shell-life time and the lower associated costs. Between the species evaluated in second experiment, Isochrysis galbana promoted higher specific growth rate and higher percentage of organic weight in the coral fragments; additionally the culture tanks supplied with this microalgae species also presented a better water quality in the end of the experiment.

Enzymatic upgrading of eucalypt paper-grade kraft pulp within dissolving pulp production

Dissolving-grade pulps are commonly used for the production of cellulose derivatives and regenerated cellulose. High cellulose content, low content of non-cellulosic material, high brightness, a uniform molecular weight distribution and high cellulose reactivity are the key features that determine the quality of a dissolving pulp. The first part of this work was an optimization study regarding the application of selected enzymes in different stages of a new purification process recently developed in Novozymes for purifying an eucalypt Kraft pulp into dissolving pulp, as an alternative to the pre-hydrolysis kraft (PHK) process. In addition, a viscosity reduction was achieved by cellulase (endoglucanase) treatment in the beginning of the sequence, while the GH11 and GH10 xylanases contributed to boost the brightness of the final pulp. The second part of the work aimed at exploring different auxiliary enzyme activities together with a key xylanase towards further removal of recalcitrant hemicelluloses from a partially bleached Eucalypt Kraft pulp. The resistant fraction (ca. 6% xylan in pulp) was not hydrolysable by the different combinations of enzymes tested. Production of a dissolving pulp was successful when using a cold caustic extraction (CCE) stage in the end of the sequence O-X-DHCE-X-HCE-D-CCE. The application of enzymes improved process efficiency. The main requirements for the production of a dissolving pulp (suitable for viscose making) were fulfilled: 2,7% residual xylan, 92,4% of brightness, a viscosity within the values of a commercial dissolving pulp and increased reactivity.

”KARKKIA, SIPSEJÄ, KEKSEJÄ JA LIMSAA” Tapaustutkimus neljäsluokkalaisten lasten ruokailutottumuksista

Tutkimuksen tarkoituksena oli selvittää millaisia ovat neljäsluokkalaisten lasten ruokailutottumukset. Tutkimuksessa kartoitettiin oppilaiden ruokailutottumuksista tietoa kokonaisvaltaisesti. Tutkittavien ruokailusta kerättiin tietoa niin arkena kuin vapaapäivinä. Lisäksi tutkimuksessa tarkasteltiin lasten painoindeksiä sekä kouluruokailua ja sen sosiaalista kontekstia. Tutkimuksen kohdepaikkakuntana oli pieni kaupunki eteläisestä Suomesta. Näytteeksi valikoitui kolmen eri koulun neljännestä luokista 28 oppilasta. Tutkimusaineisto kerättiin ruokapäiväkirjoilla, observoinnilla ja kyselylomakkeella. Aineisto analysoitiin osittain kvalitatiivisesti aineistolähtöisellä sisällönanalyysilla ja osittain kvantitatiivisesti yksinkertaisella tilastollisella taulukoinnilla. Tutkimustulosten mukaan tutkittavista neljäsluokkalaisista suurin osa söi säännöllisen ateriarytmin mukaan. Suosituimpia ruokia neljäsluokkalaisilla olivat leipä, murot, pasta- ja laatikkoruuat, makeiset sekä makeat leivonnaiset. Kasviksia, hedelmiä ja marjoja syötiin vähän. Suosituimpia juomia olivat maito, mehu ja limsa. Suurin osa oppilaista oli painoindeksiltään normaalipainoisia tai hyvin lähellä normaalia painoa. Kouluruokailut kahdessa eri koulussa olivat hyvin erityylisiä, mutta silti ne täyttivät kuntakohtaisen opetussuunnitelman tavoitteet. Neljäsluokkalaiset oppilaat söivät melko säännöllisesti, mutta ruokavalio ei ollut kovin monipuolinen. Päivittäin syötiin hyvin yksipuolista ruokaa ja kouluruokaa syötiin siinä määrin, että se ei täyttänyt ravitsemussuositusten mukaista täysipainoisuuden vaatimusta tai antanut kaikille oppilaille riittävästi energiaa. Välipaloja ja naposteltavia syötiin paljon ja ne olivat laadultaan useimpien lasten kohdalla hyvin sokeri- ja rasvapitoisia. Tutkittavat eivät aineiston perusteella syöneet ravitsemussuositusten mukaisesti ja ovat alttiita ylipainolle. Kouluille, oppilaille ja heidän vanhemmilleen tulisi tarjota terveyskasvatusta, jotta lasten ruokavalio muuttuisi monipuolisemmaksi ja terveellisemmäksi. Kouluruokailu todettiin tutkimustulosten perusteella melko irralliseksi osaksi muusta koulutyöstä. Koulujen ja opettajien tulisi muuttaa suhtautumistaan kouluruokailua kohtaan, jotta se voitaisiin nähdä osana kasvatustyötä. Kouluruokailun suunnitteluun tulisi panostaa enemmän, jotta se tarjoaisi niin koulun lapsille kuin aikuisillekin virkistävän ja mukavan yhteisen hetken.

make half your grains whole : 10 tips to help you eat whole grains

Any food made from wheat, rice, oats, cornmeal, barley, or another cereal grain is a grain product. Bread, pasta, oatmeal, breakfast cereals, tortillas, and grits are examples. Grains are divided into two subgroups, whole grains and refined grains. Whole grains contain the entire grain kernel—the bran, germ, and endosperm. People who eat whole grains as part of a healthy diet have a reduced risk of some chronic diseases

Does fumigation of durum wheat and semolina with sulfuryl fluoride affect quality of the grain, semolina, and derived spaghetti and bread?

There is no information on the effect of sulfuryl fluoride (SF) on durum wheat technological properties and products made from fumigated durum wheat. Durum wheat and semolina were exposed to a range of SF applications under conditions that might be typically encountered in bulk storage facilities used in many countries. SF greatly reduced the germination percentage of fumigated durum wheat, with increasing impact under higher SF concentration, grain moisture content, and fumigation temperature. SF greatly reduced seed germination percentage, impacting more the higher the SF concentration. SF had little to no effect on grain test weight, 1,000-grain weight, hardness, protein content, semolina ash content, and mixograph properties. At the highest SF concentration (31.25 mg/L for 48 h) there was a tendency for pasta cooking loss to be increased but still acceptable, and other pasta properties were largely unaffected. Fumigation with SF did not have any impact on the baking properties of a wholemeal durum flour-commercial flour mix. Therefore, SF is not recommended if the grains are to be used as seeds for agricultural production, but for the production of semolina, pasta, and bread, SF used under typical fumigation conditions has little to no impact on technological properties of durum wheat. © 2016 AACC International, Inc.

Contributo de betões de cânhamo na regulação passiva da humidade no interior dos edifícios

Verifica-se um crescimento no interesse do uso de materiais de construção amigos do ambiente, tais como o betão de cânhamo, devido à necessidade de minimizar o impacto ambiental do sector da construção nas mudanças climáticas. O betão de cânhamo possui reduzida energia incorporada durante o processo de fabrico devido à sua composição: elevado teor de fibras de cânhamo, um ligante e água que formam uma pasta que aglutina as fibras. Este material de construção pode ser utilizado em elementos de alvenaria leves ou, geralmente, em placas de revestimento e isolamento. É muito higroscópico, podendo trazer vantagens a nível de economia energética, bem como da saúde e conforto térmico dos habitantes do espaço onde é aplicado. Apresenta-se um estudo experimental que teve como objetivo comparar a higroscopicidade de três tipos de betões de cânhamo e a correspondente capacidade de contribuírem para a regulação da humidade relativa (HR) no interior dos edifícios. Os betões diferem fundamentalmente no tipo de ligante utilizado nas suas formulações: cal aérea (PF70), cal hidráulica (Calco) e um ligante não identificado produzido pelo Grupo Parex (NL). Pretendeu-se ainda avaliar a contribuição da espessura de material nessa função de regulação passiva da HR. Provetes com distintas espessuras dos três betões foram sujeitos ao ensaio de determinação do Moiture Buffering Value (MBV), com ciclos diários de variação de HR: 8h a 75% de HR e 16h a 33% de HR em condições isotérmicas (23°C). Registou-se um bom MBV e não foi detetada uma diferença significativa na capacidade higroscópica dos diferentes betões, formulados com os distintos ligantes. A análise dos resultados, feita com o auxílio de modelos teóricos, permitiu destacar que a espessura envolvida na regulação da HR se mantém, na generalidade, limitada a 5cm em todas as formulações em estudo. Contudo, algumas irregularidades da superfície podem ter um forte impacto sobre a espessura ativa.

Adição de superplastificante e anti-segregante à base de CMC em pastas de cimento para Poços de Petróleo

Oil well cementing materials consist of slurries of Special class Portland cement dispersed in water. Admixtures can be used to provide the necessary fluidity, so the material can be efficiently pumped down as well as penetrate porous rocks with controlled filter loss. Construction admixtures can be used to modify the properties of oil well cements provided they can withstand and hold their properties at the higher than ambient temperatures usually encountered in oil fields. In civil construction, superplasticizer play the role of dispersants that reduce the facto r of water cement improve mechanical properties and fluidity of the cement, whereas anti-segregation agents improve the workability of the slurry. In the present study, oil well cement slurries were produced adding both a dispersant and an anti-segregation agent conventionally used in Portland CPII-Z-32 RS cement aiming at materials for primary cementing and squeeze operations. Three basic aspects were evaluated: fluidity, filter loss and the synergetic effect of the admixtures at two temperatures, i.e., 27°C and 56°C, following API RP 10B practical recommendations. The slurries were prepared using admixture concentrations varying from 2.60 Kgf/m3 (0.02 gallft3) to 5.82 Kgf/m3 (0.045 galJft3) BWOC. The density of the slurries was set to 1.89 g/cm3 (15.8 Ib/gal). 0.30 to 0.60% BWOC of a CMC-based anti-segregation agent was added to the cement to control the filter loss. The results showed that the addition of anti-segregation at concentrations above 0.55% by weight of cement resulted in the increased viscosity of the folders in temperatures evaluated. The increasing the temperature of the tests led to a reduction in the performance of anti-segregation. At concentrations of 5.20 kgf/m3 (0,040 gallft3) and 5.82 Kgf/m3 (0,045 gal/ft 3) observed a better performance of the properties evaluated in the proposed system. At low temperature was observed instability in the readings of rheology for all concentrations of anti-segregation. Contents that increasing the concentration of anti¬-segregation is limited concentrations greater than 0.55 % BWOC of the CMC in temperature analyzed. The use of the system with CMC promoted a good performance against the properties evaluated. The principal function of anti¬-segregation was optimized with increasing concentration of superplasticizer, at temperatures above the 2rC. The study of the behaviour of systemic additives, resulting in slurries of cement, which can be optimized face studies of other intrinsic properties in oil fields

Influência da vermiculita expandida na resistência à compressão e reologia de pastas cimentantes de poços de petróleo

Several problems related to the loss of hydraulic seal in oilwells, causing gas migration and/or contamination of the production zone by water, have been reported. The loss of the hydraulic seal is a consequence of cracks which can be occasioned either by the invasion of gas during the wait on cement or by the expansion of the casing causing the fracture of the cement sheath. In case of the pressure of the formation is higher than the pressure in the annulus, gas can migrate into the slurry and form microannulus, which are channels where gas migrates after the cement is set. Cracks can be also occasioned by the fracture of the cement sheath when it does not withstand the thermal and dynamic loads. In reservoirs where the oil is heavy, steam water injection operation is required in order to get the oil flowing. This operation increases the temperature of the casing, and then it expands and causes the fracture of the cement sheath in the annulus. When the failures on the cement are detected, remedial cementing is required, which raise costs caused by the interventions. Once the use of cement in the construction civil sector is older than its use in the petroleum sector, it is common to bring technologies and solutions from the civil construction and apply them on the petroleum area. In this context, vermiculite, a mineral-clay widely encountered in Brazil, has been used, on its exfoliated form, in the civil construction, especially on the manufacture of lights and fireproof concretes with excellent thermal and acoustical properties. It has already been reported in scientific journals, studies of the addition of exfoliated vermiculite in Portland cements revealing good properties related to oilwell cementing operations. Thus, this study aimed to study the rheological behavior, thickening time, stability and compressive strength of the slurries made of Portland cement and exfoliated vermiculite in 5 different compositions, at room temperature and heated. The results showed that the compressive strength decreased with the addition of exfoliated vermiculite, however the values are still allowed for oiwell cementing operations. The thickening time of the slurry with no exfoliated vermiculite was 120 min and the thickening time of the slurry with 12 % of exfoliated vermiculite was 98 min. The stability and the rheological behavior of the slurries revealed that the exfoliated vermiculite absorbed water and therefore increased the viscosity of the slurries, even though increasing the factor cement-water. The stability experiment carried out at 133 ºF showed that, there was neither sedimentation nor reduction of the volume of the cement for the slurry with 12 % of exfoliated vermiculite. Thus, the addition of exfoliated vermiculite accelerates the set time of the cement and gives it a small shrinkage during the wait on cement, which are important to prevent gas migration