Electronic Building Passport - Final Report: Project 2 National Energy Efficient Building Project Phase 2

The National Energy Efficient Building Project (NEEBP) Phase One report, published in December 2014, investigated “process issues and systemic failures” in the administration of the energy performance requirements in the National Construction Code. It found that most stakeholders believed that under-compliance with these requirements is widespread across Australia, with similar issues being reported in all states and territories. The report found that many different factors were contributing to this outcome and, as a result, many recommendations were offered that together would be expected to remedy the systemic issues reported. To follow up on this Phase 1 report, three additional projects were commissioned as part of Phase 2 of the overall NEEBP project. This Report deals with the development and piloting of an Electronic Building Passport (EBP) tool – a project undertaken jointly by pitt&sherry and a team at the Queensland University of Technology (QUT) led by Dr Wendy Miller. The other Phase 2 projects cover audits of Class 1 buildings and issues relating to building alterations and additions. The passport concept aims to provide all stakeholders with (controlled) access to the key documentation and information that they need to verify the energy performance of buildings. This trial project deals with residential buildings but in principle could apply to any building type. Nine councils were recruited to help develop and test a pilot electronic building passport tool. The participation of these councils – across all states – enabled an assessment of the extent to which these councils are currently utilising documentation; to track the compliance of residential buildings with the energy performance requirements in the National Construction Code (NCC). Overall we found that none of the participating councils are currently compiling all of the energy performance-related documentation that would demonstrate code compliance. The key reasons for this include: a major lack of clarity on precisely what documentation should be collected; cost and budget pressures; low public/stakeholder demand for the documentation; and a pragmatic judgement that non-compliance with any regulated documentation requirements represents a relatively low risk for them. Some councils reported producing documentation, such as certificates of final completion, only on demand, for example. Only three of the nine council participants reported regularly conducting compliance assessments or audits utilising this documentation and/or inspections. Overall we formed the view that documentation and information tracking processes operating within the building standards and compliance system are not working to assure compliance with the Code’s energy performance requirements. In other words the Code, and its implementation under state and territory regulatory processes, is falling short as a ‘quality assurance’ system for consumers. As a result it is likely that the new housing stock is under-performing relative to policy expectations, consuming unnecessary amounts of energy, imposing unnecessarily high energy bills on occupants, and generating unnecessary greenhouse gas emissions. At the same time, Councils noted that the demand for documentation relating to building energy performance was low. All the participant councils in the EBP pilot agreed that documentation and information processes need to work more effectively if the potential regulatory and market drivers towards energy efficient homes are to be harnessed. These findings are fully consistent with the Phase 1 NEEBP report. It was also agreed that an EBP system could potentially play an important role in improving documentation and information processes. However, only one of the participant councils indicated that they might adopt such a system on a voluntary basis. The majority felt that such a system would only be taken up if it were: - A nationally agreed system, imposed as a mandatory requirement under state or national regulation; - Capable of being used by multiple parties including councils, private certifiers, building regulators, builders and energy assessors in particular; and - Fully integrated into their existing document management systems, or at least seamlessly compatible rather than a separate, unlinked tool. Further, we note that the value of an EBP in capturing statistical information relating to the energy performance of buildings would be much greater if an EBP were adopted on a nationally consistent basis. Councils were clear that a key impediment to the take up of an EBP system is that they are facing very considerable budget and staffing challenges. They report that they are often unable to meet all community demands from the resources available to them. Therefore they are unlikely to provide resources to support the roll out of an EBP system on a voluntary basis. Overall, we conclude from this pilot that the public good would be well served if the Australian, state and territory governments continued to develop and implement an Electronic Building Passport system in a cost-efficient and effective manner. This development should occur with detailed input from building regulators, the Australian Building Codes Board (ABCB), councils and private certifiers in the first instance. This report provides a suite of recommendations (Section 7.2) designed to advance the development and guide the implementation of a national EBP system.

Posted Workers and Free Movement of Services in the European Union – the Impact on National Employment and Immigration Law

This thesis examines posting of workers within the free movement of services in the European Union. The emphasis is on the case law of the European Court of Justice and in the role it has played in the liberalisation of the service sector in respect of posting of workers. The case law is examined from two different viewpoints: firstly, that of employment law and secondly, immigration law. The aim is to find out how active a role the Court has taken with regard these two fields of law and what are the implications of the Court’s judgments for the regulation on a national level. The first part of the thesis provides a general review of the Community law principles governing the freedom to provide services in the EU. The second part presents the Posted Workers’ Directive and the case law of the European Court of Justice before and after the enactment of the Directive from the viewpoint of employment law. Special attention is paid to a recent judgment in which the Court has taken a restrictive position with regard to a trade union’s right to take collective action against a service provider established in another Member State. The third part of the thesis concentrates, firstly, on the legal status of non-EU nationals lawfully resident in the EU. Secondly, it looks into the question of how the Court’s case law has affected the possibilities to use non-EU nationals as posted workers within the freedom to provide services. The final chapter includes a critical analysis of the Court’s case law on posted workers. The judgments of the European Court of Justice are the principal source of law for this thesis. In the primary legislation the focus is on Articles 49 EC and 50 EC that lay down the rules concerning the free movement of services. Within the secondary legislation, the present work principally concentrates on the Posted Workers’ Directive. It also examines proposals of the European Commission and directives that have been adopted in the field of immigration. The conclusions of the case study are twofold: while in the field of employment law, the European Court of Justice has based its judgments on a very literal interpretation of the Posted Workers’ Directive, in the field of immigration its conclusions have been much more innovative. In both fields of regulation the Court’s judgments have far-reaching implications for the rules concerning posting of workers leaving very little discretion for the Member States’ authorities.

Scoping study to inform the development of the new national nutrition policy for Australia

This comprehensive report (748 pages) scopes a new nutrition policy for Australia (RFT 028/1213) Australian Department of Health and Ageing. Optimum nutrition is fundamental to good health. It is essential for the normal growth and physical and cognitive development of infants and children, contributes significantly to quality of life, wellbeing and workforce productivity, enhances resistance to infection and reduces the risk of obesity, chronic disease and premature death (AIHW 2012; NHMRC 2013). This scoping study reviews the current literature to identify: - key population health issues related to diet and nutrition within the Australian population; and - where gaps in current policy are evident. The scoping study reviews the literature on past and present national and international nutrition policies, strategies (policy actions), interventions and evaluations. The study analyses the evidence from the literature review and formulates recommendations regarding the key elements of effective nutrition policies including scope, guiding principles, format, key inclusions (content), development processes, governance, implementation, timelines, monitoring and surveillance, evaluation and review to guide the development of a new comprehensive National Nutrition Policy for Australia.

Average Orientation of Molecules Dissolved in Nematic Liquid Crystals of Opposite Diamagnetic Anisotropies

ZLI-1167 is a ternary mixture of nematic liquid crystals with negative diamagnetic anisotropy. It has, therefore, been used as a solvent where the spinning of the samples around the vertical axis in the conventional electromagnets without destroying the orientation of the dissolved molecules is possible in NMR experiments. This results in sharp lines with widths up to 1 Hz in the spectra.1,2 In an NMR system using a superconducting magnet (where the magnetic field direction is along the axis of spinning of the sample), it is possible to use even the nematic liquid crystals with positive diamagnetic anisotropy such as N-(p'-methoxybenzylidene)-p-n-butylaniline (MBBA) or N-(p'-ethoxybenzylidene)-p-n-butylaniline (EBBA) to obtain the spectra with sample spinning with equally sharp lines.3 The orientational behaviour of the dissolved molecules as a function of relative concentrations of the two solvents is investigated and the results are reported in the present communication.

Educating to secure the national interest

In this paper I examine how one political actor–former Prime Minister Kevin Rudd–proposes to use education for the purpose of securing national productivity and foreign policy. I work with Foucault’s suggestion that the apparatus of security is the essential technical instrument of governmentality and that the production of milieu, made up of human, spatial, temporal and cultural objects, and the government of risk are key strategies in the bio-politicisation of security. The discourse analysis also draws on Bacchi to problematise statements that (a) represent both the nation and regional neighbours as governable milieu within the ambit of a whole of government approach, and (b) locate literacy and education as both risk and solution in a security apparatus. My examination of the emergence of literacy and education as security technologies, takes account of the discursive effects of Rudd’s representation of the spaces and scale of national, geopolitical and global policy problems. I argue that in these examples of policy texts, education is used as a discursive tool to secure education workers and youth as subjects of economic interest and sovereign rule.

Transcending disciplinary, cultural and national boundaries: Emergent technologies, new education landscape and the cloud workshop project

As technology continues to become more accessible, miniaturised and diffused into the environment, the potential of wearable technology to impact our lives in significant ways becomes increasingly viable. Wearables afford unique interaction, communication and functional capabilities between users, their environment as well as access to information and digital data. Wearables also demand an inter-disciplinary approach and, depending on the purpose, can be fashioned to transcend cultural, national and spatial boundaries. This paper presents the Cloud Workshop project based on the theme of ‘Wearables and Wellbeing; Enriching connections between citizens in the Asia-Pacific region’, initiated through a cooperative partnership between Queensland University of Technology (QUT), Hong Kong Baptist University (HKBU) and Griffith University (GU). The project was unique due to its inter-disciplinary, inter-cultural and inter-national scope that occurred simultaneously between Australia and Hong Kong.

Tibetan Market Participation in China

Since the Chinese government began implementing economic reforms in the late 1970s, China has experienced profound economic change and growth. Like other parts of China, Tibetan areas of China have also experienced wide-ranging economic change with growth even higher than the China-wide average in certain years. Though China s strategic policy of developing the West provided many opportunities for economic and business activities, Tibetans have proven poorly equipped to respond to and take advantage of these opportunities. This study is about people, about market participation and specifically about why Tibetans do not effectively participate in the market in the context of China s economic development process. Many political, social, cultural and environmental factors explain the difficulties met by Tibetan communities. However, this study focuses on three factors: the social and culture context, government policy and education. The Buddhistic nature of Tibetan communities, particularly the political and economic system in traditional Tibetan society, explains this, especially after implementation of new national economic policies. An inclusive economic development policy that promotes local people s participation in the market demands serious consideration of local conditions. Unfortunately, such considerations often ignore local Tibetan realities. The economic development policy in Tibetan areas in China is nearly always an attempt to replicate the inland model and open up markets, even though economic and sociopolitical conditions in Tibet are markedly unlike much of China. A consequence of these policies is increasing numbers of non-Tibetan migrants flowing into Tibetan areas with the ensuing marginalization of Tibetans in the marketplace. Poor quality education is another factor contributing to Tibetan inability to effectively participate in the market. Vocational and business education targeting Tibetans is of very low quality and reflective of government failing to consider local circumstances when implementing education policy. The relatively few Tibetans who do receive education are nearly always unable to compete with non-Tibetan migrants in commercial activity. Encouraging and promoting Tibetan participation in business development and access to quality education are crucial for a sustainable and prosperous society in the long term. Particularly, a localized development policy that considers local environmental conditions and production as well as local culture is crucial. Tibet s economic development should be based on local environmental and production conditions, while utilizing Tibetan culture for the benefit of creating a sustainable economy. Such a localized approach best promotes Tibetan market participation. Keywords: Tibet cultural policy education market participation

Scoping study for a national survey of the prevalence of child abuse and neglect

This is a report produced as a result of a study commissioned by the Australian Government Royal Commission into Institutional Responses to Child Sexual Abuse.

Malaria burden and costs of intensified control in Bhutan, 2006-2014: A situational analysis

- Introduction Malaria cases have dwindled in Bhutan with aim of malaria elimination by 2016. The aims of this study are to determine the trends and burden of malaria, the costs of intensified control activities, the main donors of the control activities and the costs of different preventive measures in the pre-elimination phase (2006-2014). - Methods A descriptive analysis of malaria surveillance data from 2006-2014 was carried out, using data from the Vector-borne Disease Control Programme (VDCP), Bhutan. Malaria morbidity and mortality among local Bhutanese and foreign nationals were analysed. The cost of different control and preventive measures, and estimation of the average numbers of long-lasting insecticidal nests (LLINs) per person were calculated. - Findings There were 5,491 confirmed malaria cases from 2006 to 2014. By 2013, there was an average of one LLIN for every 1·51 individuals. The Global Fund was the main international donor accounting for > 80% of the total funds. The cost of procuring LLINs accounted for > 90% of the total cost of prevention measures. - Interpretation The malaria burden reduced significantly over the study period with high coverage of LLINs in Bhutan. This foreseeable challenges that require national attention to maintain malaria-free status after elimination are importation of malaria, particularly from India; continued protection of the population in endemic districts through complete coverage with LLINs and IRS; and exploration of local funding modalities post elimination in the event there is a reduction in international funding.

Country-scale carbon accounting of the vegetation and mineral soils of Finland

The increase in global temperature has been attributed to increased atmospheric concentrations of greenhouse gases (GHG), mainly that of CO2. The threat of severe and complex socio-economic and ecological implications of climate change have initiated an international process that aims to reduce emissions, to increase C sinks, and to protect existing C reservoirs. The famous Kyoto protocol is an offspring of this process. The Kyoto protocol and its accords state that signatory countries need to monitor their forest C pools, and to follow the guidelines set by the IPCC in the preparation, reporting and quality assessment of the C pool change estimates. The aims of this thesis were i) to estimate the changes in carbon stocks vegetation and soil in the forests in Finnish forests from 1922 to 2004, ii) to evaluate the applied methodology by using empirical data, iii) to assess the reliability of the estimates by means of uncertainty analysis, iv) to assess the effect of forest C sinks on the reliability of the entire national GHG inventory, and finally, v) to present an application of model-based stratification to a large-scale sampling design of soil C stock changes. The applied methodology builds on the forest inventory measured data (or modelled stand data), and uses statistical modelling to predict biomasses and litter productions, as well as a dynamic soil C model to predict the decomposition of litter. The mean vegetation C sink of Finnish forests from 1922 to 2004 was 3.3 Tg C a-1, and in soil was 0.7 Tg C a-1. Soil is slowly accumulating C as a consequence of increased growing stock and unsaturated soil C stocks in relation to current detritus input to soil that is higher than in the beginning of the period. Annual estimates of vegetation and soil C stock changes fluctuated considerably during the period, were frequently opposite (e.g. vegetation was a sink but soil was a source). The inclusion of vegetation sinks into the national GHG inventory of 2003 increased its uncertainty from between -4% and 9% to ± 19% (95% CI), and further inclusion of upland mineral soils increased it to ± 24%. The uncertainties of annual sinks can be reduced most efficiently by concentrating on the quality of the model input data. Despite the decreased precision of the national GHG inventory, the inclusion of uncertain sinks improves its accuracy due to the larger sectoral coverage of the inventory. If the national soil sink estimates were prepared by repeated soil sampling of model-stratified sample plots, the uncertainties would be accounted for in the stratum formation and sample allocation. Otherwise, the increases of sampling efficiency by stratification remain smaller. The highly variable and frequently opposite annual changes in ecosystem C pools imply the importance of full ecosystem C accounting. If forest C sink estimates will be used in practice average sink estimates seem a more reasonable basis than the annual estimates. This is due to the fact that annual forest sinks vary considerably and annual estimates are uncertain, and they have severe consequences for the reliability of the total national GHG balance. The estimation of average sinks should still be based on annual or even more frequent data due to the non-linear decomposition process that is influenced by the annual climate. The methodology used in this study to predict forest C sinks can be transferred to other countries with some modifications. The ultimate verification of sink estimates should be based on comparison to empirical data, in which case the model-based stratification presented in this study can serve to improve the efficiency of the sampling design.

Carabid beetles (Coleoptera, Carabidae) as indicators of environmental change in Ranomafana National Park, Madagascar

Growing human populations and increasing exploitation of natural resources threaten nature all over the world. Tropical countries are especially vulnerable to human impact because of the high number of species, most of these endemic and still unknown. Madagascar is one of the centers of high biodiversity and renowned for its unique species. However, during the last centuries many endemic species have gone extinct and more are endangered. Because of high natural values, Madagascar is one of the global conservation priorities. The establishment of Ranomafana National Park (RNP) was intended to preserve the unique nature of Madagascar. Containing several endemic and threatened species, Ranomafana has been selected as one of UNESCO’s World Natural Heritage sites. However, due to strong human pressures the region immediately surroundings the protected area has severely degraded. Aims of this thesis were to inventory carabid fauna in RNP and evaluate their use as indicators of the environmental change. Carabid beetles were collected from protected area (secondary and primary forests) and from its degraded surrounding area. Collecting was mostly conducted by hand during years 2000-2005. Species compositions between the protected area and its surroundings were compared, and species habitat preferences and seasonal variations were studied. In total, 4498 individuals representing 127 carabid species (of which 38 are new species) were collected. Species compositions within and outside of the protected area were markedly different. Most of the species preferred forest as their primary habitat and were mainly collected from trees and bushes. Their value as indicators is based on their different habitat requirements and sensitivity to environmental variables. Some of the species were found only in the protected forest, some occupied also the degraded forests and some preferred open areas. Carabid fauna is very species rich in Ranomafana and there are still many species to be found. Most of the species are arboreal and probably cannot survive in the deforested areas outside the park. This is very likely also the case for other species. Establishment and continued protection of RNP is probably the only way to conserve this globally important area. However, new occupations and land use methods are urgently needed by the local people for improving their own lives while maintaining the forest intact.

Surveillance of Surgical Site Infections following Major Hip and Knee Surgery in Finland

Background and aims. Since 1999, hospitals in the Finnish Hospital Infection Program (SIRO) have reported data on surgical site infections (SSI) following major hip and knee surgery. The purpose of this study was to obtain detailed information to support prevention efforts by analyzing SIRO data on SSIs, to evaluate possible factors affecting the surveillance results, and to assess the disease burden of postoperative prosthetic joint infections in Finland. Methods. Procedures under surveillance included total hip (THA) and total knee arthroplasties (TKA), and the open reduction and internal fixation (ORIF) of femur fractures. Hospitals prospectively collected data using common definitions and written protocol, and also performed postdischarge surveillance. In the validation study, a blinded retrospective chart review was performed and infection control nurses were interviewed. Patient charts of deep incisional and organ/space SSIs were reviewed, and data from three sources (SIRO, the Finnish Arthroplasty Register, and the Finnish Patient Insurance Centre) were linked for capture-recapture analyses. Results. During 1999-2002, the overall SSI rate was 3.3% after 11,812 orthopedic procedures (median length of stay, eight days). Of all SSIs, 56% were detected after discharge. The majority of deep incisional and organ/space SSIs (65/108, 60%) were detected on readmission. Positive and negative predictive values, sensitivity, and specificity for SIRO surveillance were 94% (95% CI, 89-99%), 99% (99-100%), 75% (56-93%), and 100% (97-100%), respectively. Of the 9,831 total joint replacements performed during 2001-2004, 7.2% (THA 5.2% and TKA 9.9%) of the implants were inserted in a simultaneous bilateral operation. Patients who underwent bilateral operations were younger, healthier, and more often males than those who underwent unilateral procedures. The rates of deep SSIs or mortality did not differ between bi- and uni-lateral THAs or TKAs. Four deep SSIs were reported following bilateral operations (antimicrobial prophylaxis administered 48-218 minutes before incision). In the three registers, altogether 129 prosthetic joint infections were identified after 13,482 THA and TKA during 1999-2004. After correction with the positive predictive value of SIRO (91%), a log-linear model provided an estimated overall prosthetic joint infection rate of 1.6% after THA and 1.3% after TKA. The sensitivity of the SIRO surveillance ranged from 36% to 57%. According to the estimation, nearly 200 prosthetic joint infections could occur in Finland each year (the average from 1999 to 2004) after THA and TKA. Conclusions. Postdischarge surveillance had a major impact on SSI rates after major hip and knee surgery. A minority of deep incisional and organ/space SSIs would be missed, however, if postdischarge surveillance by questionnaire was not performed. According to the validation study, most SSIs reported to SIRO were true infections. Some SSIs were missed, revealing some weakness in case finding. Variation in diagnostic practices may also affect SSI rates. No differences were found in deep SSI rates or mortality between bi- and unilateral THA and TKA. However, patient materials between these two groups differed. Bilateral operations require specific attention paid to their antimicrobial prophylaxis as well as to data management in the surveillance database. The true disease burden of prosthetic joint infections may be heavier than the rates from national nosocomial surveillance systems usually suggest.

Lactobacillus bacteremia, with special focus on the safety of probiotic Lactobacillus rhamnosus GG

Lactobacilli are gram positive rods, which belong to normal oropharyngeal, gastrointestinal and urogenital flora. They are widely used in food industry and as food additives. Although their virulence is presumed to be very low, opportunistic bacteremic infections, especially in immunocompromised hosts, have been detected. In the present study, the possible effects of increasing probiotic use of Lactobacillus rhamnosus GG (LGG) on the occurrence of bacteremia due to lactobacilli was evaluated on population level. In Finland, 90 Lactobacillus bacteremia cases were reported to the National Infectious Disease Register maintained by National Public Health Institute, during 1995-2000. Their proportion of all bacteremia cases was on average 0.24%, corresponding to 0.3 cases/100 000 inhabitants annually. In the Helsinki University Central Hospital district the corresponding proportion of all bacteremia cases was observed during 1990-2000. Despite LGG intake increased six folded no increasing trend in the occurrence of lactobacilli bacteremia was seen. A total of 85 Lactobacillus sp. blood isolates collected from different human bacteremic cases were characterised and compared with the commercial probiotic LGG strain. In species characterisation 46 L. rhamnosus strains, 12 L. fermentum and L. casei strains each, three each of L. gasseri, L. salivarius and L. jensenii species, two L. curvatus, and one each of L. plantarum, L. sakei, L. zeae and L. reuteri species were detected. Nearly half of the L. rhamnosus findings turned out to be indistinguishable from the probiotic LGG strain. Common predisposing factors to Lactobacillus bacteremia were immunosuppression, prior prolonged hospitalisation and prior surgical interventions. Severe or fatal comorbidities were found in 82% of the patients. Mortality at one month was 26% and severe underlying diseases were a significant predictor of death (OR 15.8). Antimicrobial susceptibility of Lactobacillus strains was species dependent. The Lactobacillus isolates were generally susceptible to imipenem, piperacillin-tazobactam, clindamycin and erythromycin, whereas all other than L. gasseri and L. jensenii species were not at all susceptible to vancomycin. The susceptibility to cephalosporin varied greatly even within species why they might not be recommended for treatment of Lactobacillus infections. The effect and safety of probiotic LGG preparation in amelioration of gastric symptoms and diarrhea in HIV-infected patients was evaluated. No significant differences in gastrointestinal symptoms or diarrhoea in LGG treated patients compared to placebo could be found. LGG was well tolerated with no adverse effects including bacteremic outbreaks could be observed. The use of probiotic LGG can be regarded safe in this immunocompromised patient group.

An optimal weighted-average congestion based pricing scheme for enhanced QoS

Pricing is an effective tool to control congestion and achieve quality of service (QoS) provisioning for multiple differentiated levels of service. In this paper, we consider the problem of pricing for congestion control in the case of a network of nodes under a single service class and multiple queues, and present a multi-layered pricing scheme. We propose an algorithm for finding the optimal state dependent price levels for individual queues, at each node. The pricing policy used depends on a weighted average queue length at each node. This helps in reducing frequent price variations and is in the spirit of the random early detection (RED) mechanism used in TCP/IP networks. We observe in our numerical results a considerable improvement in performance using our scheme over that of a recently proposed related scheme in terms of both throughput and delay performance. In particular, our approach exhibits a throughput improvement in the range of 34 to 69 percent in all cases studied (over all routes) over the above scheme.