963 resultados para indicators’ improvement method


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Some specific characteristics of the aging of the Brazilian population in different areas, states and communities all over the country, have shown significant variations. Historical series of demographic and health indicators for the population in their sixties and over in Brazil, state of S. Paulo and in the municipal district of Araraquara are listed as follows: level of education and urban population growth rate, income distribution, mortality rates and main causes of death. In 1991 the aged constituled were 7,8% of the Brazilian population and 9,7% in Araraquara community. The elderly population (of 70 years of aged and above) as a proportion of the whole, has increased and already stands for 40%. The same trend holds good for both the proportion of aged within the urban population and their level of education wich increased to 90% in 1991. The main causes of death are chronic degenerative diseases which have replaced the infectious illness: firts, the diseases of the circulatory sistem (which account for more than 40% of all deaths) and the neoplasms (which let to 15% of the deaths). On the basis of these health and demographic data relating to people of 60 years of age and over, this study suggests some procedures for the improvement of the quality of the assistance given to the target population: a) the assistance give to the aged should be improved by providing gerontological training for general physicians and nurses, both of public and private clinics; b) the already exixting educational activities for the aged, for health workers and for teachers of secundary education should be further developed; c) the number of day-hospitals should be increased for the purpose of avoiding unnecessary confinement so as maintain the low rate of institutionalization in homes for the elderly (0,7% in Araraquara). It is reported that at least 35% of the aged population in this area is entitled to private health assistance, wich brings out the importance of including such services in the local health programs for this group.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

An alternative vector control method, using lambda-cyhalothrin impregnated wide-mesh gauze covering openings in the walls of the houses was developed in an area in the Eastern part of the interior of Suriname. Experimental hut observations showed that Anopheles darlingi greatly reduced their biting activity (99-100%) during the first 5 months after impregnation. A model assay showed high mortality both of mosquitoes repelled by the gauze as well as of those that succeeded in getting through it. A field application test in 270 huts showed good acceptance by the population and good durability of the applied gauze. After introducing the method in the entire working area, replacing DDT residual housespraying, the malaria prevalence, of 25-37% before application dropped and stabilized at between 5 and 10% within one year. The operational costs were less than those of the previously used DDT housespraying program, due to a 50% reduction in the cost of materials used. The method using widemesh gauze impregnated with lambdacyhalothrin strongly affects the behavior of An. darlingi. It is important to examine the effect of the method on malaria transmission further, since data indirectly obtained suggest substantial positive results.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A actividade de construção civil é responsável por grande parte dos resíduos produzidos, nomeadamente em obras de construção, demolições de edifícios ou derrocadas, operações de manutenção, restauro, remodelação e reabilitação de construções. A gestão dos resíduos deste sector, abreviadamente designada por resíduos de construção e demolição (RCD), passou a estar regulada, através de regime de operações de gestão de RCD. Este diploma, define entre outras, a responsabilidade dos vários intervenientes no processo de gestão de resíduos, fase de projecto, execução, transporte e recepção. Com a evolução das preocupações ambientais da população e maior envolvência das empresas na contribuição para uma gestão integrada de resíduos, existe um crescente desenvolvimento de estudos no âmbito de caracterização de quantidades e tipos de resíduos produzidos pelo sector. Neste contexto, e por ser importante uma economia integrada com a gestão de resíduos, os principais desafios passam pelo planeamento e preparação de Obra desde da fase de projecto à fase de execução, com vista à prevenção, redução, reutilização e valorização dos RCD. O presente trabalho pretende contribuir para este desenvolvimento do sector, mais concretamente na obtenção de indicadores de resíduos de construção (RC), resíduos de demolição (RD) e caracterização da tipologia destes. Para tanto, foi feita uma avaliação dos estudos desenvolvidos no âmbito de caracterização dos tipos de resíduos e indicadores de RC e RD, como método comparativo. Os indicadores deste estudo foram obtidos com base na análise de dados de casos de estudo, no caso concreto RC, de obras de estruturas, e RD de edifícios com execução de demolição selectiva. Na parte final deste estudo apresentam-se algumas conclusões e recomendações.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A certificação deixou de ser “apenas” uma vantagem competitiva para passar a ser um critério seleccionador de empresas diferenciando-as das concorrentes. O conceito de melhoria contínua subjacente à norma ISO 9001 transmite para o mercado a imagem de empresas capazes de satisfazer e superar as exigências dos clientes, direccionando todos os colaboradores para esse objectivo comum. O sector dos Transportes aderiu em força a esta inovação mostrando interesse em melhorar a qualidade do serviço prestado e dos processos. O objectivo deste estudo é contribuir para a avaliação da implementação do Sistema de Gestão da Qualidade (SGQ) ISO 9001:2008 numa empresa de Transportes rodoviários de mercadorias porta a porta (TRMPP) – também designado por Transporte Fraccionado de Mercadorias. Elaborou-se um questionário a clientes construindo-se os indicadores de forma a identificar pontos fortes e pontos fracos no sentido da melhoria contínua da qualidade. Destacam-se a competitividade relativamente às devoluções, grau de satisfação relativamente à competitividade geral, classificação do serviço prestado pelos motoristas/ ajudantes. Conclui-se que a principal razão que levou a empresa a implementar o SGQ foi a necessidade de responder a alguns requisitos nomeadamente concursos públicos onde implicitamente existem indicadores de satisfação dos clientes e outros de melhoria da qualidade do produto/serviço. Durante o processo de implementação do SGQ, surgiram dificuldades relacionadas essencialmente com o tempo necessário para tratar de burocracias e com os custos da Qualidade. Concluiu-se ainda que a Gestão de topo, os Directores e os Chefes de Secção, são os principais responsáveis pela detecção e correcção de não conformidades, bem como a empresa que implementou novos métodos de motivação dos colaboradores, destacando a formação e a comunicação.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

OBJECTIVE: In order to determine the relationship between some maternal anthropometric indicators and birth weight, crown-heel length and newborn's head circumference, 92 pregnant women were followed through at the prenatal service of hospital in S. Paulo, Brazil. MATERIAL AND METHOD: The following variables were established for the mother: weight, height, mid-upper arm circumference, pre-pregnancy weight, gestational weight gain and Quetelet's index. For the newborn the following variables were recorded: birth weight, crown-heel length, head circumference and gestational age by Dubowitz's method. RESULTS: Significant associations were noted between gestational age and newborn variables. In addition, maternal mid-arm circumference (MUAC) and pre-pregnancy weight were found to be positively correlated to birth weight (r=0.399; r=0.378, respectively). The multivariate linear regression shows that gestational age, mother's arm circumference and pre-pregnancy weight continue to be significant predictors of birth weight. On the other hand, only gestational age and mother's age was associated with crown-heel length. Similarly MUAC was significantly associated with crown-heel length (r= 0.306; P=0.0030). CONCLUSION: Maternal mid-upper arm circumference is a potential indicator of maternal nutritional status. It could be used in association with other anthropometric measurements, instead of pre-pregnancy weight, as an alternative indicator to assess women at risk of poor pregnancy outcome.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This paper is on the problem of short-term hydro scheduling, particularly concerning head-dependent reservoirs under competitive environment. We propose a new nonlinear optimization method to consider hydroelectric power generation as a function of water discharge and also of the head. Head-dependency is considered on short-term hydro scheduling in order to obtain more realistic and feasible results. The proposed method has been applied successfully to solve a case study based on one of the main Portuguese cascaded hydro systems, providing a higher profit at a negligible additional computation time in comparison with a linear optimization method that ignores head-dependency.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Since collaborative networked organisations are usually formed by independent and heterogeneous entities, it is natural that each member holds his own set of values, and that conflicts among partners might emerge because of some misalignment of values. In contrast, it is often stated in literature that the alignment between the value systems of members involved in collaborative processes is a prerequisite for successful co-working. As a result, the issue of core value alignment in collaborative networks started to attract attention. However, methods to analyse such alignment are lacking mainly because the concept of 'alignment' in this context is still ill defined and shows a multifaceted nature. As a contribution to the area, this article introduces an approach based on causal models and graph theory for the analysis of core value alignment in collaborative networks. The potential application of the approach is then discussed in the virtual organisations' breeding environment context.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Amorphous glass/ZnO-Al/p(a-Si:H)/i(a-Si:H)/n(a-Si1-xCx:H)/Al imagers with different n-layer resistivities were produced by plasma enhanced chemical vapour deposition technique (PE-CVD). An image is projected onto the sensing element and leads to spatially confined depletion regions that can be readout by scanning the photodiode with a low-power modulated laser beam. The essence of the scheme is the analog readout, and the absence of semiconductor arrays or electrode potential manipulations to transfer the information coming from the transducer. The influence of the intensity of the optical image projected onto the sensor surface is correlated with the sensor output characteristics (sensitivity, linearity blooming, resolution and signal-to-noise ratio) are analysed for different material compositions (0.5 < x < 1). The results show that the responsivity and the spatial resolution are limited by the conductivity of the doped layers. An enhancement of one order of magnitude in the image intensity signal and on the spatial resolution are achieved at 0.2 mW cm(-2) light flux by decreasing the n-layer conductivity by the same amount. A physical model supported by electrical simulation gives insight into the image-sensing technique used.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Dissertação apresentada ao Instituto Superior de Contabilidade para a obtenção do Grau deMestre em Auditoria Orientada por Alcina Augusta de Sena Portugal Dias

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Objetivos: Pretende-se verificar as modificações neuromotoras após uma intervenção baseada no conceito de Bobath ao nível dos ajustes posturais durante o alcance funcional dos membros superiores, em três crianças com paralisia cerebral. Pretende-se também, verificar o efeito desta abordagem nas atividades e participação, bem como destacar os aspetos individuais das mesmas crianças com a capacidade de mudança após a intervenção. Metodologia: A avaliação foi realizada antes e três meses após a intervenção em fisioterapia segundo o conceito de Bobath. Optou-se por um registo observacional com uma Máquina Fotográfica Digital, um sistemas de Câmaras de Vídeo, uma Plataforma de Forças e, utilizaram-se ainda instrumentos como o Gross Motor Functional Measure– versão 88 itens, o Gross Motor Function Classification System, o Teste de Alcance Funcional Modificado e a ferramenta, Classificação Internacional de Funcionalidade, Incapacidade e Saúde – crianças e jovens. Resultados: Verificou-se um progresso nos ajustes posturais e na funcionalidade em geral, o que se repercutiu na restrição da participação e na limitação da actividade. A postura na posição de sentado, o deslocamento do centro de pressão, a capacidade de deslocamento no sentido anterior, bem como as capacidades motoras grosseiras modificaram-se em todas as crianças, tendo a criança B apresentado a maior e a criança A a menor capacidade de mudança após a intervenção. Conclusão: A intervenção segundo o Conceito de Bobath promoveu modificações neuromotoras, o que levaram a uma melhoria da funcionalidade geral, da mobilidade e do controlo postural da criança, refletindo-se nos ajustes posturais durante o alcance funcional dos membros superiores na posição de sentado. Verificou-se ainda, uma melhoria na restrição da participação e na limitação da actividade diária.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Objectivos: Identificar as alterações no controlo postural do tronco e repercussões na independência funcional de indivíduos com acidente vascular encefálico (AVE), bem como averiguar se ocorreram mudanças a esse nível após a intervenção, baseada na abordagem segundo o Conceito de Bobath. Metodologia: Foram seleccionados para este estudo dois indivíduos com alterações no controlo postural, resultantes de um AVE, em fase aguda. A avaliação foi realizada em dois momentos (M0 e M1), antes e após quatro semanas da realização da intervenção através da análise do movimento, da aplicação da Escala de Avaliação Postural para Pacientes com Sequelas de AVE (PASS), da Escala de Equilíbrio de Berg (EEB), da Escala Modificada de Barthel (BEM), do Teste Timed Up & Go (TUG) e da Classificação Internacional de Funcionalidade, Incapacidade e Saúde (CIF). Resultados: Os scores obtidos em M1 nos vários instrumentos aplicados, bem como a análise de movimento traduzem a evolução favorável no controlo postural do tronco e na independência nas actividades da vida diária (AVD), observada em ambos os casos clínicos. Verificou-se uma evolução mais evidente na EMB e EEB onde o indivíduo A evoluiu na EMB de 51 em M0 para 94 pontos em M1e o indivíduo B de 51 para 89 pontos. Na EEB o indivíduo A progrediu de 22 para 41 pontos e o indivíduo B de 10 para 36 pontos. Conclusão: Os participantes em estudo evidenciaram modificações no controlo postural com repercussões positivas na independência funcional, após a intervenção com base numa abordagem segundo o conceito de Bobath.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Several antineoplasic drugs have been demonstrated to be carcinogenic or to have mutagenic and teratogenic effects. The greatest protection is achieved with the implementation of administrative and engineering controls and safety procedures. Objective: to evaluate the improvements on pharmacy technicians' work practices, after the implementation of operational procedures related to individual protection, biologic safety cabinet disinfection and cytotoxic drug preparation. Method: case-study in a hospital pharmacy undergoing a certification process. Six pharmacy technicians were observed during their daily activities. Characterization of the work practices was made using a checklist based on ISOPP and PIC guidelines. The variables studied concerning cleaning/disinfection procedures, personal protective equipment and procedures for preparing cytotoxic drugs. The same work practices were evaluated after four months of operational procedures implementation. Concordance between work practices and guidelines was considered to be a quality indicator (guidelines concordance practices number/total number of practices x 100). Results: improvements were observed after operational procedures implementation. An improvement of 6,25% in personal protective equipment practice was achieved by changing second pair of gloves every thirty minutes. The major progress, 10%, was obtained in disinfection procedure, where 80% of tasks are now realized according to guidelines.By now, we hot an improvement of only 1% at drug preparation procedure by placing one cytotoxic drug at a time inside the biological safety cabinet. Then, 85% of practices are according to guidelines. Conclusion: before operational procedures implementation 80,3% of practices were according to the guidelines, while now is 84,4%. This indicates that is necessary to review the procedures frequently in the benefit to reduce the risks associated with handling cytotoxic drugs and maintenance of drug specifications.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O presente Relatório de Estágio teve como objectivo analisar e discutir as competências adquiridas e desenvolvidas, durante o estágio, no controlo da qualidade microbiológica na indústria farmacêutica O estágio, foi realizado no Laboratório de Microbiologia dos Laboratórios Atral, Grupo AtralCipan, localizado na Vala do Carregado, Castanheira do Ribatejo. Este teve a duração de aproximadamente dez meses e meio, com data de início a 21 de Setembro de 2011 e final de 10 de Agosto de 2012. Numa fase inicial, foram adquiridas as aptidões necessárias para a aplicação das metodologias realizadas no laboratório de microbiologia com o estudo das normas, procedimento e legislação aplicada, com foco na importância das farmacopeias na indústria farmacêutica e formação para a realização de ensaios em Áreas de Processamento Asséptico, conhecendo e compreendendo os procedimentos a ter nestas. Uma das principais metodologias realizadas, e desenvolvida neste relatório, compreendeu a análise de produtos farmacêuticos estéreis, com a aplicação de Testes de Esterilidade, pelo método de STERITEST e método Directo, com resultados que demonstraram a importância destas técnicas, da avaliação do ambiente em que são realizadas e do operador que as executa. Os Testes de Promoção de Crescimento, foram também explorados neste trabalho, realizados não só para avaliação dos meios de cultura, onde foi possível analisar os requisitos e resultados obtidos, como também para validação de metodologias, nomeadamente, na validação de meios e fluidos de marcas diferentes para utilização no método STERITEST e na validação do método de filtração de membrana para Enumeração Microbiana de um produto não estéril. Estas validações possibilitaram a redução de custos e melhoria das condições da análise e metodologias aplicadas. Com a realização do estágio foi possível adquirir aptidões práticas, que aliadas ao conhecimento teórico obtido no mestrado, proporcionaram um crescimento a nível pessoal, científico e profissional.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This paper presents MASCEM - Multi-Agent Simulator for Electricity Markets improvement towards an enlarged model for Seller Agents coalitions. The simulator has been improved, both regarding its user interface and internal structure. The OOA, used as development platform, version was updated and the multi-agent model was adjusted for implementing and testing several negotiations regarding Seller agents’ coalitions. Seller coalitions are a very important subject regarding the increased relevance of Distributed Generation under liberalised electricity markets.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Learning is not a spectator’s sport. Students do not learn much by just sitting in class listening their teachers, memorizing pre-packaged assignments and spitting out answers. The teaching-learning process has been a constant target of studies, particularly in Higher Education, in consequence of the annual increase of new students. The concern with maintaining a desired quality level in the training of these students, conjugated with the will to widen the access to all of those who finish Secondary School Education, has triggered a greater intervention from the education specialists, in partnership with the teachers of all Higher Education areas, in the analysis of this problem. Considering the particular case of Engineering, it has been witnessed a rising concern with the active learning strategies and forms of assessment. Research has demonstrated that students learn more if they are actively engaged with the material they are studying. In this presentation we describe, present and discuss the techniques and the results of Peer Instruction method in an introductory Calculus courses of an Engineering Bach