As Bibliotecas Universitárias de Portugal e Nordeste do Brasil: estudo sobre o impacto e mediação das tecnologias digitais

Analisa as práticas de mediação desenvolvidas nas bibliotecas universitárias pelos bibliotecários diante das tecnologias digitais. Para tanto estabelece como objetivo geral analisar de forma comparativa, o impacto e mediação das tecnologias digitais no funcionamento de bibliotecas Universitárias de Portugal e da região Nordeste do Brasil. Integraram esta pesquisa 10 universidades federais brasileiras e 12 universidades públicas portuguesas, com um total geral de 115 bibliotecários, que são os sujeitos participantes. É uma pesquisa qualitativa que adota o método quadripolar – recomendado para os trabalhos desenvolvidos no âmbito das Ciências Sociais Aplicadas, e em especial na área de Ciência da Informação. Através da interação entre os polos: epistemológico, teórico, técnico e morfológico, que fundamentam este método, houve o fortalecimento e a fluidez das questões estudadas. Os resultados dos questionários aplicados aos bibliotecários, bem como da análise dos sítios das bibliotecas pesquisadas, foram interpretados através de um alicerce teórico baseado em três pontos principais: as questões paradigmáticas que envolvem a área de Ciência da Informação, a análise da mediação pós-custodial informacional e científica e as Tecnologias de Informação e Comunicação presentes nas bibliotecas. Como principais resultados vemos que o impacto das tecnologias digitais nas bibliotecas universitárias é considerado pelos bibliotecários brasileiros e portugueses como positivo, com ênfase em dois pontos: a inovação dos suportes de informação e a autossuficiência dos utilizadores. A maior diferença se percebe em relação ao aspecto social, através de uma maior preocupação entre os bibliotecários brasileiros com as barreiras informacionais causadas por questões econômica, social e educacional e sentido com menos intensidade pelos bibliotecários portugueses, que ascendem as tecnologias digitais com mais facilidade. De forma conclusiva, a análise do impacto e a mediação das tecnologias digitais nas bibliotecas pesquisadas, apontam para uma evolução nas práticas mediadoras das bibliotecas universitárias de Portugal e do Nordeste do Brasil e uma convergência laboral entre os bibliotecários portugueses e brasileiros.

Impactos da adoção de sistemas de informação no judiciário: pesquisa com usuários do sistema processual virtual em um juizado especial federal

The Information Technology (IT) is increasing his applicability to business, both private and public companies. It is necessary the adequate use of the new technologies and get cooperation and technology acceptance of the system. People tend to resist to the changes, contributing so that the technology is rejected or even it is not recognized as promoting of the changes. This study is relevant and aim to evaluate the impacts of new technologies, considering their users as fundamental factors in the change process. The survey analyzed the advantages and the barriers of the system use in three federal special judicial of Rio Grande do Norte, with data collected in May of 2007, through the application of questionnaires to thirty eight users of the virtual system CRETA. The users' perception was evaluated, under the optics of five variables: efficiency, image, agility, ease of use and quality. Starting from the obtained results, it was evidenced that the implementation of the system felt accordingly the expected and it reached the objectives intended that were: the velocity and efficiency in the path of the lawsuits, larger productivity, resulting in a better quality of the final work introduced to the citizen and proportionate an improvement in the organizational image of the judiciary power

O uso do móbile marketing como estratégia de fidelização de clientes :um estudo e empresas do setor de comércio e serviços em natal-RN

This study aims to understand the effects of the mobile marketing use as a relationships tool for companies that operate locally, because of the lack of information about this new marketing tool, as well as the scarcity of studies in this area. This is an exploratory and qualitatively study, based on primary sources, raised through books, articles in the marketing area and the telecommunications industry organs as well as secondary sources. With the purpose to look into the issue, a semi-structured interview is made with the companies managers of the sectors of trade and services in Natal-RN. The advances in technology allow an important discussion focused on the marketing in the new communication technologies scenario. It appears that the mobile marketing adoption and use by local companies is already a reality and companies are awake to changes and technological innovations accessible, especially the mobile telephony as well as convergence with other media. There is, however, that the use of technologies offered by mobile marketing is still limited to the sending of text messages (SMS), despite the numerous possibilities of it use. Moreover, the results obtained with mobile marketing use show that companies can identify them, but there is no effective monitoring in quantity and financial terms. Only affect sales growth and support for progress in loyalty with customers. It shows up that the mentality of not measuring the results still in the plan of changes and technological innovations. The data allow saying that the mobile marketing is a reality, however has not yet signed as a tool for carrying out campaigns and marketing tool for loyalty of customers, despite presenting a wide range of possibilities to streamline and make more effective the marketing businesses process

Fatores críticos de sucesso como antecedentes da aceitação de um sistema de informação em uma universidade federal

In recent decades the public sector comes under pressure in order to improve its performance. The use of Information Technology (IT) has been a tool increasingly used in reaching that goal. Thus, it has become an important issue in public organizations, particularly in institutions of higher education, determine which factors influence the acceptance and use of technology, impacting on the success of its implementation and the desired organizational results. The Technology Acceptance Model - TAM was used as the basis for this study and is based on the constructs perceived usefulness and perceived ease of use. However, when it comes to integrated management systems due to the complexity of its implementation,organizational factors were added to thus seek further explanation of the acceptance of such systems. Thus, added to the model five TAM constructs related to critical success factors in implementing ERP systems, they are: support of top management, communication, training, cooperation, and technological complexity (BUENO and SALMERON, 2008). Based on the foregoing, launches the following research problem: What factors influence the acceptance and use of SIE / module academic at the Federal University of Para, from the users' perception of teachers and technicians? The purpose of this study was to identify the influence of organizational factors, and behavioral antecedents of behavioral intention to use the SIE / module academic UFPA in the perspective of teachers and technical users. This is applied research, exploratory and descriptive, quantitative with the implementation of a survey, and data collection occurred through a structured questionnaire applied to a sample of 229 teachers and 30 technical and administrative staff. Data analysis was carried out through descriptive statistics and structural equation modeling with the technique of partial least squares (PLS). Effected primarily to assess the measurement model, which were verified reliability, convergent and discriminant validity for all indicators and constructs. Then the structural model was analyzed using the bootstrap resampling technique like. In assessing statistical significance, all hypotheses were supported. The coefficient of determination (R ²) was high or average in five of the six endogenous variables, so the model explains 47.3% of the variation in behavioral intention. It is noteworthy that among the antecedents of behavioral intention (BI) analyzed in this study, perceived usefulness is the variable that has a greater effect on behavioral intention, followed by ease of use (PEU) and attitude (AT). Among the organizational aspects (critical success factors) studied technological complexity (TC) and training (ERT) were those with greatest effect on behavioral intention to use, although these effects were lower than those produced by behavioral factors (originating from TAM). It is pointed out further that the support of senior management (TMS) showed, among all variables, the least effect on the intention to use (BI) and was followed by communications (COM) and cooperation (CO), which exert a low effect on behavioral intention (BI). Therefore, as other studies on the TAM constructs were adequate for the present research. Thus, the study contributed towards proving evidence that the Technology Acceptance Model can be applied to predict the acceptance of integrated management systems, even in public. Keywords: Technology

Arquitetura empresarial: um estudo de caso sobre a integração entre a plataforma moodle e o sigaa na UFRN

Atualmente, um dos aspectos da gestão da informação que se encontra em evidência é o da arquitetura empresarial, entendida como o conjunto de políticas e escolhas técnicas de padronização e integração para viabilizar as estratégias de negócios da organização. Esta pesquisa tem por objetivo analisar a integração de dois sistemas de gestão na Universidade Federal do Rio Grande do Norte (UFRN) a partir das lentes da arquitetura empresarial. A influência dessa abordagem induz a organização a desenvolver um alicerce de execução com o interesse de suportar com maior eficiência sua estratégia e obter agilidade em seus processos de negócio. A análise da integração desses dois sistemas, através de entrevistas semiestruturadas, no âmbito da UFRN possibilitou a percepção da necessidade de uma estruturação dos processos de TI a partir de uma arquitetura que favoreça um melhor alinhamento das capacidades de TI aos objetivos da organização. A ausência de um modelo operacional pode comprometer a eficiência do Sistema Integrado de Gestão das Atividades Acadêmicas (SIGAA) da UFRN na realização do seu objetivo como plataforma única de gestão das informações da universidade

Processo de implantação de um sistema integrado de gestão em uma organização pública à luz da teoria da hospitalidade :um estudo de caso

In the present time, public organizations are employing more and more solutions that uses information technology in order to ofer more transparency and better services for all citizens. Integrated Systems are IT which carry in their kernel features of integration and the use of a unique database. These systems bring several benefits and face some obstacles that make their adoption difficult. The conversion to a integrated system may take years and, thus, the study of the adoption of this IT in public sector organizations become very stimulant due to some peculiarities of this sector and the features of this technology. First of all, information about the particular integrated system in study and about its process of conversion are offered. Then, the researcher designs the configuration of the conversion process aim of this study the agents envolved and the moments and the tools used to support the process in order to elaborate the methodology of the conversion process understood as the set of procedures and tools used during all the conversion process. After this, the researcher points out, together with all the members of the conversion team, the negative and positive factors during the project. Finally, these factors were analysed through the Hospitality Theory lens which, in the researcher opinion, was very useful to understand the elements, events and moments that interfered in the project. The results consolidated empirically the Hospitality Theory presumptions, showing yet a limitation of this theory in the case in study

Do modelo geométrico ao modelo físico: o tridimensional na educação do arquiteto e urbanista

In the teaching practice of architecture and urbanism in Brazil, educational legislation views modeling laboratories and workshops as an indispensable component of the infrastructure required for the good functioning of any architectural course of study. Although the development of information technology at the international level has created new possibilities for digital production of architectural models, research in this field being underway since the early 1990s, it is only from 2007 onwards that such technologies started to be incorporated into the teaching activity of architecture and urbanism in Brazil, through the pioneering experience at LAPAC/FEC/UNICAMP. It is therefore a recent experiment whose challenges can be highlighted through the following examples: (i) The implementation of digital prototyping laboratories in undergraduate courses of architecture and urbanism is still rare in Brazil; (ii) As a new developing field with few references and application to undergraduate programs, it is hard to define methodological procedures suitable for the pedagogical curricula already implemented or which have already been consolidated over the years; (iii) The new digital ways for producing tridimensional models are marked with specificities which make it difficult to fit them within the existing structures of model laboratories and workshops. Considering the above, the present thesis discusses the tridimensional model as a tool which may contribute to the development of students skills in perceiving, understanding and representing tridimensional space. Analysis is made of the relation between different forms of models and the teaching of architectural project, with emphasis on the design process. Starting from the conceptualization of the word model as it is used in architecture and urbanism, an attempt is made to identify types of tridimensional models used in the process of project conception, both through the traditional, manual way of model construction as well as through the digital ones. There is also an explanation on how new technologies for digital production of models through prototyping are being introduced in undergraduate academic programs of architecture and urbanism in Brazil, as well as a review of recent academic publications in this area. Based on the paradigm of reflective practice in teaching as designed by Schön (2000), the experiment applied in the research was undertaken in the integrated workshop courses of architectural project in the undergraduate program of architecture and urbanism at Universidade Federal do Rio Grande do Norte. Along the experiment, physical modeling, geometric modeling and digital prototyping are used in distinct moments of the design process with the purpose of observing the suitability of each model to the project s phases. The procedures used in the experiments are very close to the Action Research methodology in which the main purpose is the production of theoretical knowledge by improving the practice. The process was repeated during three consecutive semesters and reflection on the results which were achieved in each cycle helped enhancing the next one. As a result, a methodological procedure is proposed which consists of the definition of the Tridimensional Model as the integrating element for the contents studied in a specific academic period or semester. The teaching of Architectural Project as it is developed along the fifth academic period of the Architecture and Urbanism undergraduate program of UFRN is taken as a reference

Estudo paramétrico da segregação gravitacional na injeção contínua de vapor

Steam injection is the most used method of additional recovery for the extraction of heavy oil. In this type procedure is common to happen gravitational segregation and this phenomenon can affect the production of oil and therefore, it shoulds be considered in the projects of continuous steam injection. For many years, the gravitational segregation was not adequately considered in the calculation procedures in Reservoir Engineering. The effect of the gravity causes the segregation of fluids inside the porous media according to their densities. The results of simulation arising from reservoirs could provide the ability to deal with the gravity, and it became apparent that the effects of the gravity could significantly affect the performance of the reservoir. It know that the gravitational segregation can happen in almost every case where there is injection of light fluid, specially the steam, and occurs with greater intensity for viscous oil reservoirs. This work discusses the influence of some parameters of the rock-reservoir in segregation as viscosity, permeability, thickness, cover gas, porosity. From a model that shows the phenomenon with greater intensity, optimized some operational parameters as the rate flow rate steam, distance between the wells injector-producer, and interval of completion which contributed to the reduction in gravity override, thus increasing the oil recovery. It was shown a greater technical-economic viability for the model of distance between the wells 100 m. The analysis was performed using the simulator of CMG (Computer Modeling Group-Stars 2007.11, in which was observed by iterating between studied variables in heavy oil reservoirs with similar characteristics to Brazilian Northeast

Estudo e implementação de algoritmos inteligentes para detecção e classificação de falhas na medição de gás natural

This master dissertation presents the study and implementation of inteligent algorithms to monitor the measurement of sensors involved in natural gas custody transfer processes. To create these algoritmhs Artificial Neural Networks are investigated because they have some particular properties, such as: learning, adaptation, prediction. A neural predictor is developed to reproduce the sensor output dynamic behavior, in such a way that its output is compared to the real sensor output. A recurrent neural network is used for this purpose, because of its ability to deal with dynamic information. The real sensor output and the estimated predictor output work as the basis for the creation of possible sensor fault detection and diagnosis strategies. Two competitive neural network architectures are investigated and their capabilities are used to classify different kinds of faults. The prediction algorithm and the fault detection classification strategies, as well as the obtained results, are presented

Estudo paramétrico da recuperação de petróleo pesado por aquecimento eletromagnético resistivo

Electrical resistive heating (ERH) is a thermal method used to improve oil recovery. It can increase oil rate and oil recovery due to temperature increase caused by electrical current passage through oil zone. ERH has some advantage compared with well-known thermal methods such as continuous steam flood, presenting low-water production. This method can be applied to reservoirs with different characteristics and initial reservoir conditions. Commercial software was used to test several cases using a semi-synthetic homogeneous reservoir with some characteristics as found in northeast Brazilian basins. It was realized a sensitivity analysis of some reservoir parameters, such as: oil zone, aquifer presence, gas cap presence and oil saturation on oil recovery and energy consumption. Then it was tested several cases studying the electrical variables considered more important in the process, such as: voltage, electrical configurations and electrodes positions. Energy optimization by electrodes voltage levels changes and electrical settings modify the intensity and the electrical current distribution in oil zone and, consequently, their influences in reservoir temperature reached at some regions. Results show which reservoir parameters were significant in order to improve oil recovery and energy requirement in for each reservoir. Most significant parameters on oil recovery and electrical energy delivered were oil thickness, presence of aquifer, presence of gas cap, voltage, electrical configuration and electrodes positions. Factors such as: connate water, water salinity and relative permeability to water at irreducible oil saturation had low influence on oil recovery but had some influence in energy requirements. It was possible to optimize energy consumption and oil recovery by electrical variables. Energy requirements can decrease by changing electrodes voltages during the process. This application can be extended to heavy oil reservoirs of high depth, such as offshore fields, where nowadays it is not applicable any conventional thermal process such as steam flooding

Estudo do processo de combustão in-situ em reservatórios maduros de óleos médios e leves (high pressure air injection)

Nearly 3 x 1011 m3 of medium and light oils will remain in reservoirs worldwide after conventional recovery methods have been exhausted and much of this volume would be recovered by Enhanced Oil Recovery (EOR) methods. The in-situ combustion (ISC) is an EOR method in which an oxygen-containing gas is injected into a reservoir where it reacts with the crude oil to create a high-temperature combustion front that is propagated through the reservoir. The High Pressure Air Injection (HPAI) method is a particular denomination of the air injection process applied in light oil reservoirs, for which the combustion reactions are dominant between 150 and 300°C and the generation of flue gas is the main factor to the oil displacement. A simulation model of a homogeneous reservoir was built to study, which was initially undergone to primary production, for 3 years, next by a waterflooding process for 21 more years. At this point, with the mature condition established into the reservoir, three variations of this model were selected, according to the recovery factors (RF) reached, for study the in-situ combustion (HPAI) technique. Next to this, a sensitivity analysis on the RF of characteristic operational parameters of the method was carried out: air injection rate per well, oxygen concentration into the injected gas, patterns of air injection and wells perforations configuration. This analysis, for 10 more years of production time, was performed with assistance of the central composite design. The reservoir behavior and the impacts of chemical reactions parameters and of reservoir particularities on the RF were also evaluated. An economic analysis and a study to maximize the RF of the process were also carried out. The simulation runs were performed in the simulator of thermal processes in reservoirs STARS (Steam, Thermal, and Advanced Processes Reservoir Simulator) from CMG (Computer Modelling Group). The results showed the incremental RF were small and the net present value (NPV) is affected by high initial investments to compress the air. It was noticed that the adoption of high oxygen concentration into the injected gas and of the five spot pattern tends to improve the RF, and the wells perforations configuration has more influence with the increase of the oil thickness. Simulated cases relating to the reservoir particularities showed that smaller residual oil saturations to gas lead to greater RF and the presence of heterogeneities results in important variations on the RF and on the production curves

Gestão compartilhada de P&D em petróleo:a interação entre a Petrobrás e a Universidade Federal do Rio Grande do Norte

This work addresses the relationship between University-Firm aims to understand the model of shared management of R&D in petroleum of Petrobras with UFRN. This is a case study which sought to investigate whether the model of cooperation established by the two institutions brings innovation to generate technical-scientific knowledge and contribute to the coordination with other actors in the promotion of technological innovation. In addition to desk research the necessary data for analysis were obtained by sending questionnaires to the coordinators of projects in R&D at the company and university. Also, interviews were conducted with subjects who participated in the study since its inception to the present day. This case study were analysed through the Resource-Based View and Interorganizational Networks theory. The sample data also stands that: searches were aligned to the strategic planning and that 29% of R&D projects have been successful on the scope of the proposed objectives (of which 11% were incorporated into business processes); which was produced technical and scientific knowledge caracterized by hundreds of national and international publications; thesis, dissertations, eleven patents, and radical and incremental innovations; the partnership has also brought benefits to the academic processes induced by the improved infrastructure UFRN and changing the "attitude" of the university (currently with national prominence in research and staff training for the oil sector). As for the model, the technical point of view, although it has some problems, it follows that it is appropriate. From the viewpoint of the management model is criticized for containing an excess of bureaucracy. From the standpoint of strategic allocation of resources from the legal framework needs to be reassessed, because it is focused only on the college level and it is understood that should also reach the high school given the new reality of the oil sector in Brazil. For this it is desirable to add the local government to this partnership. The set of information leads to the conclusion that the model is identified and named as a innovation of organizational arrangement here known as Shared Management of R&D in petroleum of Petrobras with UFRN. It is said that the shared management model it is possible to exist, which is a simple and effective way to manage partnerships between firms and Science and Technology Institutions. It was created by contingencies arising from regulatory stand points and resource dependence. The partnership is the result of a process of Convergence, Construction and Evaluation supported by the tripod Simplicity, Systematization and Continuity, important factors for its consolidation. In practice an organizational arrangement was built to manage innovative university-industry partnership that is defined by a dyadic relationship on two levels (institutional and technical, therefore governance is hybrid), by measuring the quarterly meetings of systematic and standardized financial contribution proportional to the advancement of research. These details have led to the establishment of a point of interaction between the scientific and technological-business dimension, demystifying they are two worlds apart

Fatores que afetam a competitividade do queijo artesanal: um estudo exploratório no Seridó/RN

This article presents a study on the research of the factors that affect the competitiveness of cheese produced in a craft in the Seridó of Rio Grande do Norte in the perception of rural producers. His theory is based on factors of competitiveness and definitions of craft production. This research was performed in the important area of production and marketing of cheeses from the state. The methodology used was exploratory research descriptive type survey. The research field of 213 returned questionnaires validated. those interviewed were rural producers of artisanal cheese, with properties distributed in the districts located in the region. The results showed the production of artisanal cheese in Seridó / RN's main points of difficulty to compete: the great marketing in the informality, workforce has low skills and education, has little technical assistance, low acceptance by technological innovations and absence of integration between producers which creates low productivity and qualification of the production chain

Aplicação do método de análise hierárquica na tomada de decisão para adoção de computação em nuvem: um estudo de caso na federação das indústrias do RN

The progresses of the Internet and telecommunications have been changing the concepts of Information Technology IT, especially with regard to outsourcing services, where organizations seek cost-cutting and a better focus on the business. Along with the development of that outsourcing, a new model named Cloud Computing (CC) evolved. It proposes to migrate to the Internet both data processing and information storing. Among the key points of Cloud Computing are included cost-cutting, benefits, risks and the IT paradigms changes. Nonetheless, the adoption of that model brings forth some difficulties to decision-making, by IT managers, mainly with regard to which solutions may go to the cloud, and which service providers are more appropriate to the Organization s reality. The research has as its overall aim to apply the AHP Method (Analytic Hierarchic Process) to decision-making in Cloud Computing. There to, the utilized methodology was the exploratory kind and a study of case applied to a nationwide organization (Federation of Industries of RN). The data collection was performed through two structured questionnaires answered electronically by IT technicians, and the company s Board of Directors. The analysis of the data was carried out in a qualitative and comparative way, and we utilized the software to AHP method called Web-Hipre. The results we obtained found the importance of applying the AHP method in decision-making towards the adoption of Cloud Computing, mainly because on the occasion the research was carried out the studied company already showed interest and necessity in adopting CC, considering the internal problems with infrastructure and availability of information that the company faces nowadays. The organization sought to adopt CC, however, it had doubt regarding the cloud model and which service provider would better meet their real necessities. The application of the AHP, then, worked as a guiding tool to the choice of the best alternative, which points out the Hybrid Cloud as the ideal choice to start off in Cloud Computing. Considering the following aspects: the layer of Infrastructure as a Service IaaS (Processing and Storage) must stay partly on the Public Cloud and partly in the Private Cloud; the layer of Platform as a Service PaaS (Software Developing and Testing) had preference for the Private Cloud, and the layer of Software as a Service - SaaS (Emails/Applications) divided into emails to the Public Cloud and applications to the Private Cloud. The research also identified the important factors to hiring a Cloud Computing provider

Uso da internet em ambiente acadêmico :estudo com docentes em institruição de educação tecnológica no Brasi

The last decade, characterized by the vertiginous growth of the computers worldwide net, brought radical changes in the use of the information and communication. Internet s use at business world has been largely studied; however, few are the researches about the academic use of this technology, mainly if we take into consideration institutions of technologic education. In this context, this research made an analysis of internet s use in a technologic education institution in Brazil, analyzing, in particular, the Centro Federal de Educação Tecnológica do Rio Grande do Norte CEFET/RN for that standard use of this Information Technology (IT) tools and, at the same time, studying the determinant factors of this use. To reach the considered objectives, a survey research was effected, be given data collected daily through the research s questionnaire application to 150 teachers who answered a set of closed and scaled questions. The quantitative data were qualitatively analyzed, arriving a some significant results related to the standard use and the factors that influenced in the use of these Internet technologies, like: the age scale, the exposition s to the computer level, the area of academic graduation, the area of knowledge where acts and the title, exert significant influence in the academic use of Internet between the professors