Epistemic beliefs and beliefs about teaching practices for moral learning in the early years of school : relationships and complexities

While investment in young children is recognised as important for the development of moral values for a cohesive society, little is known about early years teaching practices that promote learning of moral values. This paper reports on observations and interviews with 11 Australian teachers, focusing on their epistemic beliefs and beliefs about teaching practices for moral education with children aged 5 to 8 years. The analysis revealed three main patterns of thinking about moral education: following others, reflecting on points of view, and informing reflection for action. These patterns suggest a relationship between epistemic beliefs and beliefs about teaching practices for moral learning which have implications for teacher professional development concerning experiences in moral education.

The development of a new method for the determination of concentrations of carbonaceous gases using a non-dispersive infrared sensor

An analytical method for the detection of carbonaceous gases by a non-dispersive infrared sensor (NDIR) has been developed. The calibration plots of six carbonaceous gases including CO2, CH4, CO, C2H2, C2H4 and C2H6 were obtained and the reproducibility determined to verify the feasibility of this gas monitoring method. The results prove that squared correlation coefficients for the six gas measurements are greater than 0.999. The reproducibility is excellent, thus indicating that this analytical method is useful to determinate the concentrations of carbonaceous gases.

Teaching teachers for the future : how, what, why, and what next?

This paper contextualises the Teaching Teachers of the Future (TTF) Project and acts as a preamble for the TTF stream of papers at ACEC2012. It discusses the aims and objectives of the project, its genesis in a changing educational and political landscape, the use of TPACK as a theoretical scaffold, and briefly report on the operations of the various components and partners. Further, it will discuss the research opportunities afforded by the project including a national survey of all pre-service teachers in Australia gauging their TPACK confidence and the use of the Most Significant Change (MSC) methodology. Finally the paper will discuss the outcomes of the project and its future.

Mid-Career professionals in STEM transiting to school teaching : barriers at the border

In many countries there is a shortage of quality teachers in areas of science, technology, engineering and mathematics (STEM). Additional to the low levels of recruitment is an extraordinary high attrition rate with some 50% of beginning teachers leaving the profession within five years. One solution implemented in several countries has been to encourage mid-career professionals in the area of STEM to become school teachers. These professionals are said to bring to teaching enthusiasm, knowledge and a passion for their subject which will impact engagement and learning by students. However, these career-changers have constructed professional identities and are accustomed to working within a culture of collaboration and inquiry. In contrast, school cultures are quite different and often teaching is a lonely solitary affair with little opportunity for collegial relationships aimed at knowledge building in the context of teaching. Crossing from a culture of STEM to a culture of schools and teaching can be challenging. This study was conducted with 13 teachers who were followed for three years. However, this paper reports on the experiences of one teacher with an engineering background crossing the boundaries from practising STEM to Teaching STEM.

Use of concept maps in reforming teaching Family and Consumer Sciences in Kuwait

This paper addresses the professional development of Kuwaiti teachers in the use of concept maps to teach Family and Consumer Science. A key aim of the study was to evaluate the degree to which the use of concept maps would influence the way Kuwaiti teachers approach and teach Family and Consumer Studies (FCS) subjects and the degree to which concept maps empower students to critically identify and express their knowledge of the subject being taught. A case study methodology was adopted to follow the implementation of lessons using concept maps by four teachers of middle years. An analysis of the data revealed the positive impact that student-centred teaching tools can have on the reformation of traditional teaching environments. For all teachers, the primary strengths of using concept maps were the ability to generate student interest, to motivate student participation and to enhance student understanding of content. Although a case study design may limit the generalisation and comparative value of the study, the findings of this study remain important to the planning of future professional development programs and the use of concept maps within Kuwait’s FCS curriculum area.

A wide area monitoring system based load restoration method

Restoring a large-scale power system has always been a complicated and important issue. A lot of research work has been done on different aspects of the whole power system restoration procedure. However, more time will be required to complete the power system restoration process in an actual situation if accurate and real-time system data cannot be obtained. With the development of the wide area monitoring system (WAMS), power system operators are capable of accessing to more accurate data in the restoration stage after a major outage. The ultimate goal of the system restoration is to restore as much load as possible while in the shortest period of time after a blackout, and the restorable load can be estimated by employing WAMS. Moreover, discrete restorable loads are employed considering the limited number of circuit-breaker operations and the practical topology of distribution systems. In this work, a restorable load estimation method is proposed employing WAMS data after the network frame has been reenergized, and WAMS is also employed to monitor the system parameters in case the newly recovered system becomes unstable again. The proposed method has been validated with the New England 39-Bus system and an actual power system in Guangzhou, China.

Shear design of cold-formed steel beams using direct strength method

This paper presents the direct strength method (DSM) equations for cold-formed steel beams subject to shear. Light gauge cold-formed steel sections have been developed as more economical building solutions to the alternative heavier hot-rolled sections in the commercial and residential markets. Cold-formed lipped channel beams (LCB), LiteSteel beams (LSB) and hollow flange beams (HFB) are commonly used as flexural members such as floor joists and bearers. However, their shear capacities are determined based on conservative design rules. For the shear design of cold-formed web panels, their elastic shear buckling strength must be determined accurately including the potential post-buckling strength. Currently the elastic shear buckling coefficients of web panels are determined by assuming conservatively that the web panels are simply supported at the junction between the flange and web elements and ignore the post-buckling strength. Hence experimental and numerical studies were conducted to investigate the shear behaviour and strength of LSBs, LCBs and HFBs. New direct strength method (DSM) based design equations were proposed to determine the ultimate shear capacities of cold-formed steel beams. An improved equation for the higher elastic shear buckling coefficient of cold-formed steel beams was proposed based on finite element analysis results and included in the DSM design equations. A new post-buckling coefficient was also introduced in the DSM equation to include the available post-buckling strength of cold-formed steel beams.

A new online secondary path modelling method for feedforward active noise control systems

An online secondary path modelling method using a white noise as a training signal is required in many applications of active noise control (ANC) to ensure convergence of the system. Not continually injection of white noise during system operation makes the system more desirable. The purposes of the proposed method are two folds: controlling white noise by preventing continually injection, and benefiting white noise with a larger variance. The modelling accuracy and the convergence rate increase when a white noise with larger variance is used, however larger the variance increases the residual noise, which decreases performance of the system. This paper proposes a new approach for online secondary path modelling in feedfoward ANC systems. The proposed algorithm uses the advantages of the white noise with larger variance to model the secondary path, but the injection is stopped at the optimum point to increase performance of the system. Comparative simulation results shown in this paper indicate effectiveness of the proposed approach in controlling active noise.

A hydrogen/methane sensor based on niobium tungsten oxide nanorods synthesised by hydrothermal method

An investigation on hydrogen and methane sensing performance of hydrothermally formed niobium tungsten oxide nanorods employed in a Schottky diode structure is presented herein. By implementing tungsten into the surface of the niobium lattice, we create Nb5+ and W5+ oxide states and an abundant number of surface traps, which can collect and hold the adsorbate charge to reinforce a greater bending of the energy bands at the metal/oxide interface. We show experimentally, that extremely large voltage shifts can be achieved by these nanorods under exposure to gas at both room and high temperatures and attribute this to the strong accumulation of the dipolar charges at the interface via the surface traps. Thus, our results demonstrate that niobium tungsten oxide nanorods can be implemented for gas sensing applications, showing ultra-high sensitivities.

Support for patients with hepatitis C : An exploratory qualitative study of medical specialists’ perceptions

Objective: To explore the range of meanings about the role of support for patients with hepatitis C by examining medical specialists' perceptions. Method: The study employed a qualitative, open-ended interview design and was conducted in four major teaching hospitals in Adelaide, South Australia. Eight participants (three infectious disease physicians, four gastroenterologists, one hepatologist), selected through purposive sampling, were interviewed about general patient support, their role in support provision, the role of non-medical support and their reasons for not using support services. Results: Main themes included a focus on support as information provision and that patient education is best carried out by a medical specialist. The use of support services was defined as the patient's decision. Participants identified four key periods when patients would benefit from support; during diagnosis, failure to meet treatment criteria, during interferon treatment and following treatment failure. Conclusions: It was concluded that while barriers exist to the establishment of partnerships between specialists and other support services, this study has identified clear points at which future partnerships could be established. Implications: A partnership approach to developing support for patients with hepatitis C offers a systematic framework to facilitate the participation of health professionals and the community in an important area of public health.

Chinese teaching English as a foreign language (TEFL) academics' perceptions about research in a transitional culture

Research capacity building has become a prominent theme in higher education institutions in China and across the world. However, Chinese Teaching English as a Foreign Language academics' research output has been quite limited. In order to build their research capacity, it is necessary to understand their perceptions about research. This case study presents the perceptions about research of six Chinese Teaching English as a Foreign Language academics in a context of growing institutional demands for research. One-on-one interviews of 35-60 minutes' duration were conducted with these academics from an institution in north China. Thematic analysis of the transcribed interviews indicated that the Chinese Teaching English as a Foreign Language academics held positive perceptions about the teaching-research nexus. However, the value of research to them seemed to be limited to teaching and career advancement. They also expressed varied concerns about the institutional research requirements. The findings suggested several implications for the institution's administrators to further enhance academics' research capacity building.

Assessing the potential of mathematics textbooks to promote deep learning

Curriculum documents for mathematics emphasise the importance of promoting depth of knowledge rather than shallow coverage of the curriculum. In this paper, we report on a study that explored the analysis of junior secondary mathematics textbooks to assess their potential to assist in teaching and learning aimed at building and applying deep mathematical knowledge. The method of analysis involved the establishment of a set of specific curriculum goals and associated indicators, based on research into the teaching and learning of a particular field within the mathematics curriculum, namely proportion and proportional reasoning. Topic selection was due to its pervasive nature throughout the school mathematics curriculum at this level. As a result of this study, it was found that the five textbook series examined provided limited support for the development of multiplicative structures required for proportional reasoning, and hence would not serve well the development of deep learning of mathematics. The study demonstrated a method that could be applied to the analysis of junior secondary mathematics in many parts of the world.

Damage assessment in reinforced concrete flexural members using modal strain energy based method

Damage assessment (damage detection, localization and quantification) in structures and appropriate retrofitting will enable the safe and efficient function of the structures. In this context, many Vibration Based Damage Identification Techniques (VBDIT) have emerged with potential for accurate damage assessment. VBDITs have achieved significant research interest in recent years, mainly due to their non-destructive nature and ability to assess inaccessible and invisible damage locations. Damage Index (DI) methods are also vibration based, but they are not based on the structural model. DI methods are fast and inexpensive compared to the model-based methods and have the ability to automate the damage detection process. DI method analyses the change in vibration response of the structure between two states so that the damage can be identified. Extensive research has been carried out to apply the DI method to assess damage in steel structures. Comparatively, there has been very little research interest in the use of DI methods to assess damage in Reinforced Concrete (RC) structures due to the complexity of simulating the predominant damage type, the flexural crack. Flexural cracks in RC beams distribute non- linearly and propagate along all directions. Secondary cracks extend more rapidly along the longitudinal and transverse directions of a RC structure than propagation of existing cracks in the depth direction due to stress distribution caused by the tensile reinforcement. Simplified damage simulation techniques (such as reductions in the modulus or section depth or use of rotational spring elements) that have been extensively used with research on steel structures, cannot be applied to simulate flexural cracks in RC elements. This highlights a big gap in knowledge and as a consequence VBDITs have not been successfully applied to damage assessment in RC structures. This research will address the above gap in knowledge and will develop and apply a modal strain energy based DI method to assess damage in RC flexural members. Firstly, this research evaluated different damage simulation techniques and recommended an appropriate technique to simulate the post cracking behaviour of RC structures. The ABAQUS finite element package was used throughout the study with properly validated material models. The damaged plasticity model was recommended as the method which can correctly simulate the post cracking behaviour of RC structures and was used in the rest of this study. Four different forms of Modal Strain Energy based Damage Indices (MSEDIs) were proposed to improve the damage assessment capability by minimising the numbers and intensities of false alarms. The developed MSEDIs were then used to automate the damage detection process by incorporating programmable algorithms. The developed algorithms have the ability to identify common issues associated with the vibration properties such as mode shifting and phase change. To minimise the effect of noise on the DI calculation process, this research proposed a sequential order of curve fitting technique. Finally, a statistical based damage assessment scheme was proposed to enhance the reliability of the damage assessment results. The proposed techniques were applied to locate damage in RC beams and slabs on girder bridge model to demonstrate their accuracy and efficiency. The outcomes of this research will make a significant contribution to the technical knowledge of VBDIT and will enhance the accuracy of damage assessment in RC structures. The application of the research findings to RC flexural members will enable their safe and efficient performance.

Teaching journalism students how to tell Indigenous stories in an informed way : a work integrated learning approach

Australian journalism schools are full of students who have never met an Aboriginal or Torres Strait Island person and who do not know their history. Journalism educators are ill-equipped to redress this imbalance as a large majority are themselves non-Indigenous and many have had little or no experience with the coverage of Indigenous issues or knowledge of Indigenous affairs. Such a situation calls for educational approaches that can overcome these disadvantages and empower journalism graduates to move beyond the stereotypes that characterize the representation of Indigenous people in the mainstream media. This article will explore three different courses in three Australian tertiary journalism education institutions, which use Work-Integrated Learning Approaches to instil the cultural competencies necessary to encourage a more informed reporting of Indigenous issues. The findings from the three projects illustrate the importance of adopting a collaborative approach by industry, the Indigenous community and educators to encourage students’ commitment to quality journalism practices when covering Indigenous issues.