Avaliação da implementação do SAP ERP na logística: estudo de caso

Dissertação de mestrado em Engenharia de Sistemas

A gestão de recursos humanos nas pequenas e médias empresas em Portugal: Definição de um modelo de atuação

Tese de Doutoramento em Ciências Empresariais

Modelação de governo electrónico para países emergentes: O caso de São Tomé e Príncipe

Tese de Doutoramento em Tecnologias e Sistemas de Informação

Aplicação da linha de equilíbrio no planeamento e controlo da construção

Dissertação de mestrado integrado em Engenharia Civil

Coordenação das MEP na implementação de modelos BIM

Dissertação de mestrado integrado em Engenharia Civil

Empresas sociais em Portugal: que realidade?

Dissertação de mestrado em Economia Social

Enfoques sobre la ciudadanía. Philosophical Perspectives on Citizenship.

La necesidad que da origen al presente proyecto se relaciona con la ausencia de un tratamiento de la cuestión de la ciudadanía que haga interactuar distintos enfoques filosóficos -el principal indicador de esta carencia es la ausencia de producciones académicas que den cuenta de la complejidad que adquiere la temática si se la aborda desde los problemas que nos proporcionan otras perspectivas filosóficas y políticas-. En este sentido, el problema general del proyecto apunta a hacer discutir diferentes abordajes conceptuales para pensar la ciudadanía. Específicamente, trabajamos a partir de dos enfoques: 1) la discusión entre liberales y comunitaristas y sus actuales derivas y 2) la cuestión de la biopolítica y su relación con la temática de la ciudadanía. Se procura revisar la discusión liberales-comunitaristas propia de las ciencias políticas, interpelándola a partir de conceptos como los de dominación, relaciones de poder, control sobre la vida, disciplina, entre otros provenientes de la filosofía práctica, la teoría social, las ciencias de la educación, etc. Nuestra investigación parte de la hipótesis de que hacer discutir las problemáticas que se disputan liberales-comunitaristas, con la Teoría Crítica de la Escuela de Frankfurt y con los recientes fenómenos biopolíticos, permite un abordaje que atiende a la efectiva complejidad de las prácticas de ciudadanía en nuestra vida en común en las sociedades democráticas contemporáneas. Esto permitirá complejizar los presupuestos con los que tradicionalmente se ha pensado la ciudadanía, a partir sobre todo de los fenómenos socio-políticos más recientes, como los nuevos movimientos sociales, las discusiones acerca de la legislación del aborto y la eutanasia, los esfuerzos de los estados nacionales por incrementar medidas de seguridad que van desde la imposición de fuertes barreras a la inmigración hasta la realización de guerras preventivas. Entendemos que estos, entre otros fenómenos, desafían la hermenéutica tradicional sobre la ciudadanía. Es de esta manera que se buscará comprender los límites y alcances de las ideas de ciudadanía, entendiéndola como un concepto histórico formador de subjetividades. La metodología se basa en una perspectiva interdisciplinaria que proporciona las herramientas para un análisis conceptual de la temática de la ciudadanía. Esta metodología está orientada al desarrollo de un marco teórico que resulte productivo para investigaciones de campo en las ciencias sociales, así como también para la elaboración de un material bibliográfico destinado a docentes abocados a la ciudadanía. Otro de los propósitos fundamentales es el de formar una red entre diferentes equipos de investigación a nivel nacional a partir de las “I Jornadas Nacionales sobre Ciudadanía” y de la organización de un seminario especializado con un profesor visitante. As far as the general topic of citizenship concerns philosophy, the theoretical problem of how to reconcile the different perspectives, assuming that this is an enterprise that can be done, remains an open question. Furthermore, the absence of academic material dealing with the problem seems to be a good indicator of this tendency. The main focus of the present Project aims at coping with some of the most notorious theoretical approaches to citizenship. More specifically, we will analyze the next two approaches: 1) the debate libertarians-communitarians and 2) the relationship between biopolitics and citizenship. Our purpose is to revise the discussion libertarians-communitarians incorporating concepts such as domination, power-relationships, life-control, among others that find their roots in practical philosophy, social theory, education and so on. To the extent that theories of citizenship are only provided with the usual conceptual machinery, some of the most remarkable phenomena of our democratic societies will stand for them out of reach: the existence of new social movements, abortion and euthanasia, inmigration, etc. Our hypothesis is that by making the debate libertarians-communitarians interact with the Critical Theory as well as with biopolitical concepts, we will be in a better position to try to understand these diverse phenomena. With the development of some sort of a new hermeneutics, we expect to criticize the old ideas related to citizenship and to re-elaborate them in a way that allows us to understand this concept in a less-fundamental, historical sense. Methodologically, we will adopt a multi-dimensional approach which expects to be fruitful to many other investigations in the area of social sciences. The Project pretends to be useful as a consultation resource for educators in a bibliographical index to design their curricula. At the same time,a seminar with a visiting profesor, the organization of a Congres will be our main objectives.

An emperical study of performance management systems in SMEs in the Republic of Ireland and the People's Republic of China : a cultural perspective

The objectives of this thesis are three. Firstly, finding and analyzing the differences of performance management system in SMEs in Ireland and China. Secondly, finding the cultural differences between China and Ireland and thirdly, integrating the research outcomes of the above research objectives, and then analyzing the effect of these cultural differences on performance management system in SMEs in China and Ireland.

Optimising the design and manufacture of a customised, prescription fit, Maxillo-facial prosthesis

This thesis is a continuation of the Enterprise-Ireland Research Innovation Fund (RIF) Project entitled’ "Design and Manufacturing of Customised Maxillo-Facial Prostheses" The primary objective of this Internal Research Development Program (IRDP) project was to investigate two fundamental design changes 1 To incorporate the over-denture abutments directly into the implant. 2 To remove the restraining wings by the addition of screws, which affix the. implant to the dense material of the jawbone. The prosthetic was redesigned using the ANSYS Finite Element Analysis software program and analysed to* • Reduce the internal von Mises stress distribution The new prosthetic had a -63.63 % lower von Mises stress distribution when compared with the original prosthetic. • Examine the screw preload effects. A maximum relative displacement of 22 6 * lO^mm between the bone and screw was determined, which is well below the critical threshold of micromotion which prevents osseointegration • Investigate the prosthetic-bone contact interface. Three models of the screw, prosthesis, and bone, were studied. (Axisymmetnc, quarter volume, and full volume), a recommended preload torque of 0 32 Nm was applied to the prosthetic and a maximum von Mises stress of 1.988 MPa was predicted • Study the overdenture removal forces. This analysis could not be completed because the correct plastic multilinear properties of the denture material could not be established The redesigned prosthetic was successfully manufactured on a 3-axis milling machine with an indexing system The prosthetic was examined for dimensional quality and strength The research established the feasibility of the new design and associated manufacturing method.

Design, development and testing of a CAD integrated design for environment software tool.

The research described in this thesis was developed as part o f the Information Management for Green Design (IMA GREE) Project. The 1MAGREE Project was founded by Enterprise Ireland under a Strategic Research Grant Scheme as a partnership project between Galway Mayo Institute o f Technology and C1MRU University College Galway. The project aimed to develop a CAD integrated software tool to support environmental information management for design, particularly for the electronics-manufacturing sector in Ireland.

Development of a disassembly methodology for DFE

The research described in this thesis was developed as part of the Information Management for Green Design (IMAGREE) Project. The IMAGREE Project was funded by Enterprise Ireland under Strategic Research Grant Scheme as a partnership project between Galway-Mayo Institute of Technology and CIMRU University of Galway. The project aimed to develop a CAD integrated software tool to support environmental information management for design.

Development of an integrated approach to reliability management and operation

The research described in this thesis has been developed as a part of the Reliability and Field Data Management for Multi-component Products (REFIDAM) Project. This project was founded under the Applied Research Grants Scheme administered by Enterprise Ireland. The project was a partnership between Galway-Mayo Institute of Technology and Thermo King Europe. The project aimed to develop a system in order to manage the information required for reliability assessment and improvement of multi-component products, by establishing information flows within the company and information exchange with fleet users.

Development of a life cycle management system for remote products.

The research described in this thesis has been developed as a part of the Reliability and Field Data Management for Multi-Component Products (REFIDAM) Project. This project was funded under the Applied Research Grants Scheme administered by Enterprise Ireland. The project was a partnership between Galway-Mayo Institute of Technology and an industrial company, Thermo King Europe. The project aimed to develop a system to manage the information required for maintenance costing, cost of ownership, reliability assessment and improvement of multi-component products, by establishing information flows between the customer network and across the Thermo King organisation.

Implementation of a customer relationship management system in an SME

The research conducted for this thesis has been carried out over a two year period as part of the Mobile Tools and Technology for customer care (MOTTO) project. The project was funded under the Applied Grant scheme administered by Enterprise Ireland and Nortel Networks Ltd. It was a partnership project between Galway-Mayo Institute of Technology, University of Limerick, National University of Ireland Galway, and a global Internet and communications company, Nortel Networks. The project aimed to investigate the enabling mobile communications technologies in e-Business and mobile communications in the area of Business-to-Business (B2B) customer care. The development of the application discussed in this thesis was developed in conjunction with the Galway-Mayo Institute of Technology, University of Limerick and AMT Ireland. The decision to develop the application in the Electronics Company of AMT in Limerick came about as a result of the contact established by Mark Southern from the University of Limerick. Mark was involved in overseeing the development and assisted in establishing the user requirements.

Development of a semi-automatic self learning pattern recognition system for the control of electronic boards

This project was funded under the Applied Research Grants Scheme administered by Enterprise Ireland. The project was a partnership between Galway - Mayo Institute of Technology and an industrial company, Tyco/Mallinckrodt Galway. The project aimed to develop a semi - automatic, self - learning pattern recognition system capable of detecting defects on the printed circuits boards such as component vacancy, component misalignment, component orientation, component error, and component weld. The research was conducted in three directions: image acquisition, image filtering/recognition and software development. Image acquisition studied the process of forming and digitizing images and some fundamental aspects regarding the human visual perception. The importance of choosing the right camera and illumination system for a certain type of problem has been highlighted. Probably the most important step towards image recognition is image filtering, The filters are used to correct and enhance images in order to prepare them for recognition. Convolution, histogram equalisation, filters based on Boolean mathematics, noise reduction, edge detection, geometrical filters, cross-correlation filters and image compression are some examples of the filters that have been studied and successfully implemented in the software application. The software application developed during the research is customized in order to meet the requirements of the industrial partner. The application is able to analyze pictures, perform the filtering, build libraries, process images and generate log files. It incorporates most of the filters studied and together with the illumination system and the camera it provides a fully integrated framework able to analyze defects on printed circuit boards.