Analysis of participation in the federally mandated coal workers' health surveillance program

The Federal Coal Mine Health and Safety Act of 1969 required that periodic chest radiographs be offered to underground coal miners to protect the miners from the development of Coal Workers' Pneumoconiosis (CWP) and progression of the disease to progressive massive fibrosis (PMF). These examinations are administered by the National Institute for Occupational Safety and Health (NIOSH) through the Coal Workers' Health Surveillance Program (CWHSP). The mine operator is required to provide each miner with the opportunity to have the chest radiograph at no cost to the miner.^ Three rounds of examinations have been conducted since 1969 and the fourth is underway. The decrease in participation over rounds is of great concern if the incidence and progression of CWP are to be understood and controlled.^ This study developed rates of participation for each of 558 West Virginia underground coal mines who submitted or had NIOSH assigned plans for making chest radiographs available during the third round, July 1978 through December 1980. These rates were analyzed in relation to desired levels of participation and to reinforcing, predisposing and enabling factors presumed to affect rates of participation in disease prevention and surveillance programs.^ Two reinforcing factors, size of mine and inclusion of the mine in the National Coal Study (NCS) epidemiology research program, and the enabling factor, use of an on-site radiograph facility, demonstrated highly significant relationships to participation rates.^ The major findings of the study were: (1) Participation in the CWHSP is even lower than previously estimated; (2) CWHSP program evaluation is not systematic and program data base is not complete and comprehensive; and (3) NIOSH program policy is not clear and administration of the CWHSP is fragmented and lacks adequate fiscal and personnel resources. ^

AN ANALYSIS OF THE RELATIVE INFLUENCE OF RACE, INCOME, EDUCATION, AND FOOD STAMP PROGRAM PARTICIPATION/NONPARTICIPATION ON THE FOOD AND NUTRIENT CONSUMPTION OF A NORTH FLORIDA URBAN CLINIC POPULATION IN CONJUNCTION WITH A SURVEY OF NUTRITION RELATED HABITS AND ATTITUDES

The relative influence of race, income, education, and Food Stamp Program participation/nonparticipation on the food and nutrient intake of 102 fecund women ages 18-45 years in a Florida urban clinic population was assessed using the technique of multiple regression analysis. Study subgroups were defined by race and Food Stamp Program participation status. Education was found to have the greatest influence on food and nutrient intake. Race was the next most influential factor followed in order by Food Stamp Program participation and income. The combined effect of the four independent variables explained no more than 19 percent of the variance for any of the food and nutrient intake variables. This would indicate that a more complex model of influences is needed if variations in food and nutrient intake are to be fully explained.^ A socioeconomic questionnaire was administered to investigate other factors of influence. The influence of the mother, frequency and type of restaurant dining, and perceptions of food intake and weight were found to be factors deserving further study.^ Dietary data were collected using the 24-hour recall and food frequency checklist. Descriptive dietary findings indicated that iron and calcium were nutrients where adequacy was of concern for all study subgroups. White Food Stamp Program participants had the greatest number of mean nutrient intake values falling below the 1980 Recommended Dietary Allowances (RDAs). When Food Stamp Program participants were contrasted to nonparticipants, mean intakes of six nutrients (kilocalories, calcium, iron, vitamin A, thiamin, and riboflavin) were below the 1980 RDA compared to five mean nutrient intakes (kilocalories, calcium, iron, thiamin and riboflavin) for the nonparticipants. Use of the Index of Nutritional Quality (INQ), however, revealed that the quality of the diet of Food Stamp Program participants per 1000 kilocalories was adequate with exception of calcium and iron. Intakes of these nutrients were also not adequate on a 1000 kilocalorie basis for the nonparticipant group. When mean nutrient intakes of the groups were compared using Student's t-test oleicacid intake was the only significant difference found. Being a nonparticipant in the Food Stamp Program was found to be associated with more frequent consumption of cookies, sweet rolls, doughnuts, and honey. The findings of this study contradict the negative image of the Food Stamp Program participant and emphasize the importance of education. ^

Policy analysis of iron micronutrient programs at USAID: The FANTA program in East Africa and the micronutrient initiative in Bihar region of India, using comparative cost effective and cost benefit analysis

It is the aim of this paper to examine iron supplementation programs which receive funding from United States Agency for International Development (USAID) but approach combating iron deficiency anemia in two vastly different ways. A brief literature review and background information on iron deficiencies and the differences between supplementation programs and micronutrient fortification were reviewed. Two non-governmental organizations (NGO's) were examined for this paper: the Food and Nutrition Technical Assistance II (FANTA) and the MicroNutrient Initiative. The FANTA program included an educational component to their supplementation program while the MicroNutrient Initiative solely used supplementation of micronutrients to their population. Methods used were cost-benefit analysis and cost-effectiveness analysis to determine the overall effectiveness of each program in reducing iron deficiency anemia in each population, if the added costs of the incentives in the FANTA program changed the cost-effectiveness of the program compared to the MicroNutrient Initiative program and to determine which program imparted the greatest benefit to each population by reducing the disease burden in Disability Adjusted Life Years (DALY). Results showed that the unit cost of the FANTA program per person was higher than the MicroNutrient Initiative program due to the educational component. The FANTA program reduced iron deficiency anemia less overall but cost less for each percentage point of anemia decreased in their respective populations. The MicroNutrient Initiative program had a better benefit cost ratio for the populations it served. The MicroNutrient Initiative's large scale program imparted many advantages by reducing unit cost per person and decreasing iron deficiency anemia. The FANTA program was more effective at decreasing iron deficiency anemia with less money: $5,660 per 1% decrease in iron deficiency anemia versus $18,450 per 1% decrease in iron deficiency anemia for the MicroNutrient Initiative program. ^ In conclusion, economic analysis cannot measure all of the benefits associated with programs that contain an educational component or large scale supplementation. More information needs to be gathered by NGOs and reported to USAID, such as detailed prevalence rates of iron deficiency anemia among the populations served. Further research is needed to determine the effects an educational supplementation program has on compliance rates of participants and motivation to participate in supplementation programs whose aim is to decrease iron deficiency anemia in a targeted population.^

Descriptive analysis of Ben Taub Pediatric Weight Management Program

The purpose of this study is to descriptively analyze the current program at Ben Taub Pediatric Weight Management Program in Houston, Texas, a program designed to help overweight children ages three to eighteen to lose weight. In Texas, approximately one in every three children is overweight or obese. Obesity is seen at an even greater level within Ben Taub due to the hospital's high rate of service for underserved minority populations (Dehghan et al, 2005; Tyler and Horner, 2008; Hunt, 2009). The weight management program consists of nutritional, behavioral, physical activity, and medical counseling. Analysis will focus on changes in weight, BMI, cholesterol levels, and blood pressure from 2007–2010 for all participants who attended at least two weight management sessions. Recommendations will be given in response to the results of the data analysis.^

Improved Techniques for Acquisition and Analysis of Dynamic Contrast-Enhanced Magnetic Resonance Imaging for Detecting Vascular Permeability in the Central Nervous System

Dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) is a noninvasive technique for quantitative assessment of the integrity of blood-brain barrier and blood-spinal cord barrier (BSCB) in the presence of central nervous system pathologies. However, the results of DCE-MRI show substantial variability. The high variability can be caused by a number of factors including inaccurate T1 estimation, insufficient temporal resolution and poor contrast-to-noise ratio. My thesis work is to develop improved methods to reduce the variability of DCE-MRI results. To obtain fast and accurate T1 map, the Look-Locker acquisition technique was implemented with a novel and truly centric k-space segmentation scheme. In addition, an original multi-step curve fitting procedure was developed to increase the accuracy of T1 estimation. A view sharing acquisition method was implemented to increase temporal resolution, and a novel normalization method was introduced to reduce image artifacts. Finally, a new clustering algorithm was developed to reduce apparent noise in the DCE-MRI data. The performance of these proposed methods was verified by simulations and phantom studies. As part of this work, the proposed techniques were applied to an in vivo DCE-MRI study of experimental spinal cord injury (SCI). These methods have shown robust results and allow quantitative assessment of regions with very low vascular permeability. In conclusion, applications of the improved DCE-MRI acquisition and analysis methods developed in this thesis work can improve the accuracy of the DCE-MRI results.

Supplemental Nutrition Assistance Program: A policy analysis of restricting foods with minimal nutritional value

In 2011, expenditures for the Supplemental Nutrition Assistance Program (SNAP) reached an all-time high of $72 billion. The goal of SNAP is " to alleviate hunger and malnutrition…by increasing food purchasing power for all eligible households who apply for participation." It has been well established that proper nutrition is essential to good health, making SNAP an important program to public health consumers. Thus, this analysis examined whether SNAP is meeting its stated goal and whether the goal would be reduced if the purchase of foods of minimal nutritional value (FMNV) were restricted. ^ A review of existing literature found that SNAP has been shown to alleviate hunger, but the studies on the nutritional impact of the program were not sufficient to assert whether change is needed. When considering whether limiting FMNV would reduce or improve the effectiveness of SNAP at alleviating hunger and malnutrition, there is very little information on which to base a policy change, particular one that singles out a low income group to restrict purchases. ^ Several states have attempted to restrict the purchase of FMNV but, to date, no such change has been implemented or tested. Conducting pilot studies on the restriction of FMNV, along with better data collection on SNAP purchases, would guide policy changes to the program. Although there are many potential public health benefits to restricting FMNV purchase using SNAP dollars, research is needed to quantify the cost impact of these benefits.^

Policy analysis of shifting to the state-run Texas women's health program

During the 82nd Texas legislature, state leaders passed a provision stating that healthcare providers, who perform, promote, or affiliate with providers who perform or promote elective abortion services may not be eligible to participate in the Texas Medicaid Women's Health Program (WHP). The federal government reacted to this new provision by vowing to eliminate its 90% share of program support on the grounds that the provision violated a patient's freedom to choose a provider; a right protected by the Social Security Act. Texas leaders stated that the Women's Health Program would continue without federal support, financed exclusively with state funds.^ The following policy analysis compares the projected impact of the current Medicaid Women's Health Program to the proposed state-run program using the criteria-alternative matrix framework. The criteria used to evaluate the program alternatives include population affected, unintended pregnancy and abortion impact, impact on cervical cancer rate, and state-level government expenditures. Each criterion was defined by selected measures. The population affected was measured by the number of women served in the programs. Government expenditures were measured in terms of payments for program costs, Medicaid delivery costs, and cervical cancer diagnostic costs. Unintended pregnancy impact was measured by the number of projected unplanned pregnancies and abortions under each alternative. The impact on cervical cancer was projected in terms of the number of new cervical cancer cases under each alternative. Differences in the projections with respect to each criterion were compared to assess the impact of shifting to the state-only policy.^ After examining program alternatives, it is highly recommended that Texas retain the Medicaid WHP. If the state does decide to move forward with the state-run WHP, it is recommended that the program run at its previous capacity. Furthermore, for the purpose of addressing the relatively high cervical cancer incidence rate in Texas, incorporating HPV vaccination coverage for women ages 18-26 as part of the Women's Health Program is recommended.^

Analysis of interval -censored events in hypertension studies: Evaluation of treatment of coronary heart disease

Many statistical studies feature data with both exact-time and interval-censored events. While a number of methods currently exist to handle interval-censored events and multivariate exact-time events separately, few techniques exist to deal with their combination. This thesis develops a theoretical framework for analyzing a multivariate endpoint comprised of a single interval-censored event plus an arbitrary number of exact-time events. The approach fuses the exact-time events, modeled using the marginal method of Wei, Lin, and Weissfeld, with a piecewise-exponential interval-censored component. The resulting model incorporates more of the information in the data and also removes some of the biases associated with the exclusion of interval-censored events. A simulation study demonstrates that our approach produces reliable estimates for the model parameters and their variance-covariance matrix. As a real-world data example, we apply this technique to the Systolic Hypertension in the Elderly Program (SHEP) clinical trial, which features three correlated events: clinical non-fatal myocardial infarction, fatal myocardial infarction (two exact-time events), and silent myocardial infarction (one interval-censored event). ^

Grain size and XRD analysis on Site 162-983

The grain size of deep-sea sediments provides an apparently simple proxy for current speed. However, grain size-based proxies may be ambiguous when the size distribution reflects a combination of processes, with current sorting only one of them. In particular, such sediment mixing hinders reconstruction of deep circulation changes associated with ice-rafting events in the glacial North Atlantic because variable ice-rafted detritus (IRD) input may falsely suggest current speed changes. Inverse modeling has been suggested as a way to overcome this problem. However, this approach requires high-precision size measurements that register small changes in the size distribution. Here we show that such data can be obtained using electrosensing and laser diffraction techniques, despite issues previously raised on the low precision of electrosensing methods and potential grain shape effects on laser diffraction. Down-core size patterns obtained from a sediment core from the North Atlantic are similar for both techniques, reinforcing the conclusion that both techniques yield comparable results. However, IRD input leads to a coarsening that spuriously suggests faster current speed. We show that this IRD influence can be accounted for using inverse modeling as long as wide size spectra are taken into account. This yields current speed variations that are in agreement with other proxies. Our experiments thus show that for current speed reconstruction, the choice of instrument is subordinate to a proper recognition of the various processes that determine the size distribution and that by using inverse modeling meaningful current speed reconstructions can be obtained from mixed sediments.

Development of Efficient Techniques for the Analysis and Design of Antennas in Dual-Reflectarray Configuration

This thesis contributes to the analysis and design of printed reflectarray antennas. The main part of the work is focused on the analysis of dual offset antennas comprising two reflectarray surfaces, one of them acts as sub-reflector and the second one acts as mainreflector. These configurations introduce additional complexity in several aspects respect to conventional dual offset reflectors, however they present a lot of degrees of freedom that can be used to improve the electrical performance of the antenna. The thesis is organized in four parts: the development of an analysis technique for dualreflectarray antennas, a preliminary validation of such methodology using equivalent reflector systems as reference antennas, a more rigorous validation of the software tool by manufacturing and testing a dual-reflectarray antenna demonstrator and the practical design of dual-reflectarray systems for some applications that show the potential of these kind of configurations to scan the beam and to generate contoured beams. In the first part, a general tool has been implemented to analyze high gain antennas which are constructed of two flat reflectarray structures. The classic reflectarray analysis based on MoM under local periodicity assumption is used for both sub and main reflectarrays, taking into account the incident angle on each reflectarray element. The incident field on the main reflectarray is computed taking into account the field radiated by all the elements on the sub-reflectarray.. Two approaches have been developed, one which employs a simple approximation to reduce the computer run time, and the other which does not, but offers in many cases, improved accuracy. The approximation is based on computing the reflected field on each element on the main reflectarray only once for all the fields radiated by the sub-reflectarray elements, assuming that the response will be the same because the only difference is a small variation on the angle of incidence. This approximation is very accurate when the reflectarray elements on the main reflectarray show a relatively small sensitivity to the angle of incidence. An extension of the analysis technique has been implemented to study dual-reflectarray antennas comprising a main reflectarray printed on a parabolic surface, or in general in a curved surface. In many applications of dual-reflectarray configurations, the reflectarray elements are in the near field of the feed-horn. To consider the near field radiated by the horn, the incident field on each reflectarray element is computed using a spherical mode expansion. In this region, the angles of incidence are moderately wide, and they are considered in the analysis of the reflectarray to better calculate the actual incident field on the sub-reflectarray elements. This technique increases the accuracy for the prediction of co- and cross-polar patterns and antenna gain respect to the case of using ideal feed models. In the second part, as a preliminary validation, the proposed analysis method has been used to design a dual-reflectarray antenna that emulates previous dual-reflector antennas in Ku and W-bands including a reflectarray as subreflector. The results for the dualreflectarray antenna compare very well with those of the parabolic reflector and reflectarray subreflector; radiation patterns, antenna gain and efficiency are practically the same when the main parabolic reflector is substituted by a flat reflectarray. The results show that the gain is only reduced by a few tenths of a dB as a result of the ohmic losses in the reflectarray. The phase adjustment on two surfaces provided by the dual-reflectarray configuration can be used to improve the antenna performance in some applications requiring multiple beams, beam scanning or shaped beams. Third, a very challenging dual-reflectarray antenna demonstrator has been designed, manufactured and tested for a more rigorous validation of the analysis technique presented. The proposed antenna configuration has the feed, the sub-reflectarray and the main-reflectarray in the near field one to each other, so that the conventional far field approximations are not suitable for the analysis of such antenna. This geometry is used as benchmarking for the proposed analysis tool in very stringent conditions. Some aspects of the proposed analysis technique that allow improving the accuracy of the analysis are also discussed. These improvements include a novel method to reduce the inherent cross polarization which is introduced mainly from grounded patch arrays. It has been checked that cross polarization in offset reflectarrays can be significantly reduced by properly adjusting the patch dimensions in the reflectarray in order to produce an overall cancellation of the cross-polarization. The dimensions of the patches are adjusted in order not only to provide the required phase-distribution to shape the beam, but also to exploit the crosses by zero of the cross-polarization components. The last part of the thesis deals with direct applications of the technique described. The technique presented is directly applicable to the design of contoured beam antennas for DBS applications, where the requirements of cross-polarisation are very stringent. The beam shaping is achieved by synthesithing the phase distribution on the main reflectarray while the sub-reflectarray emulates an equivalent hyperbolic subreflector. Dual-reflectarray antennas present also the ability to scan the beam over small angles about boresight. Two possible architectures for a Ku-band antenna are also described based on a dual planar reflectarray configuration that provides electronic beam scanning in a limited angular range. In the first architecture, the beam scanning is achieved by introducing a phase-control in the elements of the sub-reflectarray and the mainreflectarray is passive. A second alternative is also studied, in which the beam scanning is produced using 1-bit control on the main reflectarray, while a passive subreflectarray is designed to provide a large focal distance within a compact configuration. The system aims to develop a solution for bi-directional satellite links for emergency communications. In both proposed architectures, the objective is to provide a compact optics and simplicity to be folded and deployed.

Alarm tree analysis using statistical techniques

This work presents a systematic method for the generation and treatment of the alarms' graphs, being its final object to find the Alarm Root Cause of the Massive Alarms that are produced in the dispatching centers. Although many works about this matter have been already developed, the problem about the alarm management in the industry is still completely unsolved. In this paper, a simple statistic analysis of the historical data base is conducted. The results obtained by the acquisition alarm systems, are used to generate a directed graph from which the more significant alarms are extracted, previously analyzing any possible case in which a great quantity of alarms are produced.

Analysis and design of a thrombectomy device by using simulation techniques

Purpose: In this work, we present the analysis, design and optimization of one experimental device recently developed in the UK, called the 'GP' Thrombus Aspiration Device (GPTAD). This device has been designed to remove blood clots without the need to make contact with the clot itself thereby potentially reducing the risk of problems such as downstream embolisation. Method: To obtain the minimum pressure necessary to extract the clot and to optimize the device, we have simulated the performance of the GPTAD analysing the resistances, compliances and inertances effects. We model a range of diameters for the GPTAD considering different forces of adhesion of the blood clot to the artery wall, and different lengths of blood clot. In each case we determine the optimum pressure required to extract the blood clot from the artery using the GPTAD, which is attached at its proximal end to a suction pump. Result: We then compare the results of our mathematical modelling to measurements made in laboratory using plastic tube models of arteries of comparable diameter. We use abattoir porcine blood clots that are extracted using the GPTAD. The suction pressures required for such clot extraction in the plastic tube models compare favourably with those predicted by the mathematical modelling. Discussion & Conclusion: We conclude therefore that the mathematical modelling is a useful technique in predicting the performance of the GPTAD and may potentially be used in optimising the design of the device.

Analysis of pattern recognition techniques for in-air signature biometrics

As a result of advances in mobile technology, new services which benefit from the ubiquity of these devices are appearing. Some of these services require the identification of the subject since they may access private user information. In this paper, we propose to identify each user by drawing his/her handwritten signature in the air (in-airsignature). In order to assess the feasibility of an in-airsignature as a biometric feature, we have analysed the performance of several well-known patternrecognitiontechniques—Hidden Markov Models, Bayes classifiers and dynamic time warping—to cope with this problem. Each technique has been tested in the identification of the signatures of 96 individuals. Furthermore, the robustness of each method against spoofing attacks has also been analysed using six impostors who attempted to emulate every signature. The best results in both experiments have been reached by using a technique based on dynamic time warping which carries out the recognition by calculating distances to an average template extracted from several training instances. Finally, a permanence analysis has been carried out in order to assess the stability of in-airsignature over time.

Abstract multiple specialization and its application to program parallelization.

Program specialization optimizes programs for known valúes of the input. It is often the case that the set of possible input valúes is unknown, or this set is infinite. However, a form of specialization can still be performed in such cases by means of abstract interpretation, specialization then being with respect to abstract valúes (substitutions), rather than concrete ones. We study the múltiple specialization of logic programs based on abstract interpretation. This involves in principie, and based on information from global analysis, generating several versions of a program predicate for different uses of such predicate, optimizing these versions, and, finally, producing a new, "multiply specialized" program. While múltiple specialization has received theoretical attention, little previous evidence exists on its practicality. In this paper we report on the incorporation of múltiple specialization in a parallelizing compiler and quantify its effects. A novel approach to the design and implementation of the specialization system is proposed. The resulting implementation techniques result in identical specializations to those of the best previously proposed techniques but require little or no modification of some existing abstract interpreters. Our results show that, using the proposed techniques, the resulting "abstract múltiple specialization" is indeed a relevant technique in practice. In particular, in the parallelizing compiler application, a good number of run-time tests are eliminated and invariants extracted automatically from loops, resulting generally in lower overheads and in several cases in increased speedups.