Integração da simulação termoenergética com o processo de projeto: a análise de 6 casos

This work consists of the integrated design process analyses with thermal energetic simulation during the early design stages, based on six practical cases. It aims to schematize the integration process, identifying the thermal energetic analyses contributions at each design phase and identifying the highest impact parameters on building performance. The simulations were run in the DesignBuilder energy tool, which has the same EnergyPlus engine, validated. This tool was chosen due to the flexible and user friendly graphic interface for modeling and output assessment, including the parametric simulation to compare design alternatives. The six case studies energy tools are three architectural and three retrofit projects, and the author the simulations as a consultant or as a designer. The case studies were selected based on the commitment of the designers in order to achieve performance goals, and their availability to share the process since the early pre-design analyses, allowing schematizing the whole process, and supporting the design decisions with quantifications, including energy targets. The thermoenergetic performance analyses integration is feasible since the early stages, except when only a short time is available to run the simulations. The simulation contributions are more important during the sketch and detail phases. The predesign phase can be assisted by means of reliable bioclimatic guidelines. It was verified that every case study had two dominant design variables on the general performance. These variables differ according the building characteristics and always coincide with the local bioclimatic strategies. The adaptation of alternatives to the design increases as earlier it occurs. The use of simulation is very useful: to prove and convince the architects; to quantify the cost benefits and payback period to the retrofit designer; and to the simulator confirm the desirable result and report the performance to the client

Projeto de mobilidade urbana: estudo sobre processos de integração com habitação de interesse social nas obras do PAC da COPA 2014 em Natal/RN

The public political investments of urban mobility financed by PAC of Cup 2014 have developed discussions and questions by the civil society in Brazil expecting positive results to the urban infrastructure referring to the possible human rights violation and, specially, rights of habitation related to the removing/expropriation noticed. Natal, capital of Rio Grande do Norte, is into this context, due to the urban mobility project linking North Zone of the city to the Arena das Dunas stadium, financed by the PAC of Cup 2014, named West Structural Corridor, that crosses a field of social interest and proposes almost 400 expropriations. This research analyzes how strategies and mechanisms of integration were presented between the mobility project of West Structural Corridor and the Social Interest Habitation affected by this project. We have as hypothesis those projects financed by PAC of Cup 2014/Urban Mobility to Natal/RN present many problems related to the integration of social interest to the housing project, however the National Politics of Urban Development has planned this integration. As a result we detach 3 strategies in the elaboration process about the integration of those politics: (i) integration between municipal secretaries involved in this project; (ii) urban integration of the city; and (iii) integration of public rules or public politics integrated. For each strategy were presented the main mechanisms used to establish the integration of the project. Those mechanisms, however, in this process of establishment/implementation of the empirical research, presented many contradictions and conflicts that compose problems to the integration between the mobility project and the housing area affected.

Sobre a integração indefinida de funções racionais complexas: teoria e implementação de algoritmos racionais

We present indefinite integration algorithms for rational functions over subfields of the complex numbers, through an algebraic approach. We study the local algorithm of Bernoulli and rational algorithms for the class of functions in concern, namely, the algorithms of Hermite; Horowitz-Ostrogradsky; Rothstein-Trager and Lazard-Rioboo-Trager. We also study the algorithm of Rioboo for conversion of logarithms involving complex extensions into real arctangent functions, when these logarithms arise from the integration of rational functions with real coefficients. We conclude presenting pseudocodes and codes for implementation in the software Maxima concerning the algorithms studied in this work, as well as to algorithms for polynomial gcd computation; partial fraction decomposition; squarefree factorization; subresultant computation, among other side algorithms for the work. We also present the algorithm of Zeilberger-Almkvist for integration of hyperexpontential functions, as well as its pseudocode and code for Maxima. As an alternative for the algorithms of Rothstein-Trager and Lazard-Rioboo-Trager, we yet present a code for Benoulli’s algorithm for square-free denominators; and another for Czichowski’s algorithm, although this one is not studied in detail in the present work, due to the theoretical basis necessary to understand it, which is beyond this work’s scope. Several examples are provided in order to illustrate the working of the integration algorithms in this text

Repercussão da integração de conteúdos das disciplinas nos trabalhos finais de graduação de CAU-UFRN (2003 a 2010)

The changes in the teaching of Architecture in Brazilian Universities, from the 1990s onwards, with the upgrading of the Architecture project as an object of research and scientific knowledge and more specifically, the adoption by the Architecture and Urbanism Course (CAU) from the Federal University of Rio Grande do Norte (UFRN) of the principle of content integration of the disciplines, aroused the interest in research on issues related to the Design process and the teaching of design in this context. After 20 years of its implementation and recognized as being a major step forward in teaching the teaching/learning process, the integration is the central focus of this research, which will seek to identify changes in the teaching design and its refutation in projects developed by students at the end of their course. In general, it is understood that the need to integrate knowledge from diverse areas of Architect’s professional activity, who seeks through an exercise of summary, identify solutions to the issues involved in a project. On the assumption that the integration of content of disciplines fosters the teaching/learning of Architecture project, which can be evident in the Final Course Assignment (FCA), it becomes necessary to understand, in the light of theories of education, such as the principles of curriculum organization, such as interdisciplinarity and multidisciplinarity, transdisciplinarity and transversality are related to the term integration, is more understood and disseminated among the professors of the Architecture courses. The object of this study is consequently the relationship between the integration of subject content and Architecture projects developed by students from CAU-UFRN, in the context of Final Graduation projects (FCAs) completed in the period of duration of the Teaching Project A5-from 2003. The study has the main objective of investigating to what extent the integration of disciplinary content affects the development of the Final Assignment of UFRN, from the analysis of drawings and texts of the projects of the learners and the testimonies of teachers and undergraduate students. From a methodological point of view, the research “Architecture, Project and Knowledge Production: Academic Production – FCAs, Thesis and dissertations in PA/Brazil” carried out by the PROJETAR/UFRN team has been adopted as the basis for the construction of the analytical instruments. In order to identify aspects of their experience by various actors which were not recorded in FCA, electronic forms were applied between teachers and students, through the internet. The integration of subject content based Teaching Project of CAU-UFRN institutionalises the interdisciplinarity, organizing the curriculum by thematic semesters, in which the disciplines work the same focus and at the same site. The integrated work which derives from there tries to articulate the content of each discipline of the period and represents a general practice and has been evaluated by teachers and students, and considered as a facilitator of the teaching/learning process. The analysis of the data collected from the textual content and graphic of the sample of FCAs of CAU-UFRN suggests that the content of the various areas of knowledge are assimilated by the student and used as a resource for the design and development of Architecture projects. In other words, there is in the end product of the students record of the integration of content, whether in speech or in drawing, reaffirming the importance of the convergence of various knowledge in the Architectonic project. However, the integration of content from the point of view of their articulation and operationalization, which involves teachers and students in the same period, has as a condition sine qua non for the success of this educational principle, the provision of these to work as part of a team, for the dialogic practice, which creates areas of intersection not only between disciplines, but between the knowledge of each of the participants.

Integração de projetos no ensino através de BIM: uma abordagem dos cursos de arquitetura e urbanismo da UFRN e da UFPB

The integration between architectural design and structur al systems consi sts, in academic education, one of the main challenges to the architectural design education . Recent studies point to the relevance of the use of computational tools in academic settings as an important strategy for such integration. Although in recent yea rs teaching experience using BIM (BuildingInformationModeling) may be incorporated by the a rchitecture schools , notes the need for further didactic and pedagogical practices that promote the architectural design and structur al integration teaching. This pa per analyzes experiences developed within the UFRN and UFPB, seeking to identify tools, processes and products used, pointing limitations and potentials in subjects taught in these institutions. The research begins with a literature review on teaching BIM and related aspects to the integration of architectural design and stru c tur e . It has been used as data collection techniques in studio the direct observation, the use of questionnaires and interviews with students and teachers, and mixed method, qualitativ e and quantitative analysis . In UFRN, the scope of the Integrated Workshop as a compulsory subject in the curriculum, favors the integration of disciplines studied here as it allows teachers from different disciplines at the same project studio . Regarding the use of BIM form initial users, BIM modelers, able to extract quantitative and automatically speed up production, gaining in quality in the products, however learn the tool and design in parallel cause some difficulties. UFPB, lack of required courses o n BIM, generates lack of knowledge and confidence in using the tool and processes, by most students. Thus we see the need for greater efforts by school to adopt BIM skills and training. There is a greater need for both BIM concept, in order to promote BIM process and consequent better use of tools, and obsolete avoiding impairment of technology, merely a tool. It is considered the inclusion of specific subjects with more advanced BIM skills, through partnerships with engineering degrees and the promotion of trans disciplinary integration favoring the exchange of different cultures from the academic environment.

Avaliação sistemática de uma abordagem para integração de funcionalidades em sistemas web clonados

The software product line engineering brings advantages when compared with the traditional software development regarding the mass customization of the system components. However, there are scenarios that to maintain separated clones of a software system seems to be an easier and more flexible approach to manage their variabilities of a software product line. This dissertation evaluates qualitatively an approach that aims to support the reconciliation of functionalities between cloned systems. The analyzed approach is based on mining data about the issues and source code of evolved cloned web systems. The next step is to process the merge conflicts collected by the approach and not indicated by traditional control version systems to identify potential integration problems from the cloned software systems. The results of the study show the feasibility of the approach to perform a systematic characterization and analysis of merge conflicts for large-scale web-based systems.

Integração e interdisciplinaridade no processo ensino/aprendizagem de projeto: o curso de Arquitetura e Urbanismo da Universidade Potiguar de Mossoró-RN

Training in Architecture and Urbanism with its general characteristic involves, in its nature, knowledge of various areas (technology, theory, history, representation, and design), being the space of design conception that place where the synthesis of this knowledge is reflected more clearly. We believe that the integrated work in the architectural curriculum can provide an overview of the project, thus contributing to better training of the architect. This research aims to reflect on the role of integration and interdisciplinary in teaching architectural design. This theme has been work recurrently by critics in the teaching area of project and events of the area as the seminars of the Projetar, highlighted by several authors to search integration as an essential pedagogical approach to design education. The work aims to contribute to reflection and awareness of those involved on the importance of integration in the architectural course of project processes. For this, we analyzed the potential and limits of this process in Architecture and Urbanism Course (CAU) at the Universidade Potiguar (UNP) Mossoró, which has the integration and interdisciplinary recorded since the Pedagogical Project of the Course. This analysis will be performed by observing the development of “interdisciplinary work” in the fifth term during the first half of 2014.1. This research concerns an exploratory qualitative study that aims to investigate specific issues on the teaching/learning architecture project and the integration in architecture courses, following a non-participant observation in architectural design classes in the fifth term of CAU/UnP/ Mossoró, and analysis of final products, which would be the work of the last unit of the semester, called “Interdisciplinary work”. Questionnaires for the teachers who participated in the process has been apply via email and analyzed. Reflection supports several other already carried out to identify the difficulties inherent in applying these principles satisfactorily. Noting, however, that interdisciplinarity, in fact, it goes beyond integration and is even more difficult to achieve. In addition to an educational project that incorporates these principles, such as the course of Architecture and Urbanism of the UNP-Mossoró, full adhesion it is necessary by the faculty and students of this teaching philosophy.

Integração e interdisciplinaridade no processo ensino/aprendizagem de projeto: o curso de Arquitetura e Urbanismo da Universidade Potiguar de Mossoró-RN

Training in Architecture and Urbanism with its general characteristic involves, in its nature, knowledge of various areas (technology, theory, history, representation, and design), being the space of design conception that place where the synthesis of this knowledge is reflected more clearly. We believe that the integrated work in the architectural curriculum can provide an overview of the project, thus contributing to better training of the architect. This research aims to reflect on the role of integration and interdisciplinary in teaching architectural design. This theme has been work recurrently by critics in the teaching area of project and events of the area as the seminars of the Projetar, highlighted by several authors to search integration as an essential pedagogical approach to design education. The work aims to contribute to reflection and awareness of those involved on the importance of integration in the architectural course of project processes. For this, we analyzed the potential and limits of this process in Architecture and Urbanism Course (CAU) at the Universidade Potiguar (UNP) Mossoró, which has the integration and interdisciplinary recorded since the Pedagogical Project of the Course. This analysis will be performed by observing the development of “interdisciplinary work” in the fifth term during the first half of 2014.1. This research concerns an exploratory qualitative study that aims to investigate specific issues on the teaching/learning architecture project and the integration in architecture courses, following a non-participant observation in architectural design classes in the fifth term of CAU/UnP/ Mossoró, and analysis of final products, which would be the work of the last unit of the semester, called “Interdisciplinary work”. Questionnaires for the teachers who participated in the process has been apply via email and analyzed. Reflection supports several other already carried out to identify the difficulties inherent in applying these principles satisfactorily. Noting, however, that interdisciplinarity, in fact, it goes beyond integration and is even more difficult to achieve. In addition to an educational project that incorporates these principles, such as the course of Architecture and Urbanism of the UNP-Mossoró, full adhesion it is necessary by the faculty and students of this teaching philosophy.

Pirometamorfismo provocado por intrusões básicas cenozoicas em rochas da Bacia Potiguar, RN: integração de dados geológicos e petrofísicos

The Potiguar Basin is located in the Brazilian Equatorial Margin and presents sedimentary rocks affected by Cenozoic basic igneous intrusions, known as Macau Magmatism. The most prominent effect related to these intrusions is the formation of buchites, pyrometamorphic rocks that occur at very high temperatures and very low pressures in the sanidinite metamorphic facies. Through literature review, field observations, petrographic and petrophysical data, accessing the database of previous studies and results from this research, it was possible to characterize and estimate the effects produced in the thermal aureole of some hypabyssal bodies in the basin. The most relevant features associated with the intrusions are: compactation, hydraulic fracturing, partial melting and recrystallization of country rocks. According to the observed mineral occurrences, temperature of 800 to 1200 °C and pressure below 0,5 kbar were estimated at the contacts of the igneous bodies. The thermal modeling of the São João plug indicates thermal effects extending up to 150 m away from the contact and cooling time of approximately 265,000 years. After the peak of temperature, followed a cooling phase registered by remobilization and precipitation of minerals at low-temperature in faults, fractures and geodes, interpreted as derived from reactions with sedimentary rocks and metasomatic / hydrothermal fluids with abundant carbonatization and silicification.

Pirometamorfismo provocado por intrusões básicas cenozoicas em rochas da Bacia Potiguar, RN: integração de dados geológicos e petrofísicos

The Potiguar Basin is located in the Brazilian Equatorial Margin and presents sedimentary rocks affected by Cenozoic basic igneous intrusions, known as Macau Magmatism. The most prominent effect related to these intrusions is the formation of buchites, pyrometamorphic rocks that occur at very high temperatures and very low pressures in the sanidinite metamorphic facies. Through literature review, field observations, petrographic and petrophysical data, accessing the database of previous studies and results from this research, it was possible to characterize and estimate the effects produced in the thermal aureole of some hypabyssal bodies in the basin. The most relevant features associated with the intrusions are: compactation, hydraulic fracturing, partial melting and recrystallization of country rocks. According to the observed mineral occurrences, temperature of 800 to 1200 °C and pressure below 0,5 kbar were estimated at the contacts of the igneous bodies. The thermal modeling of the São João plug indicates thermal effects extending up to 150 m away from the contact and cooling time of approximately 265,000 years. After the peak of temperature, followed a cooling phase registered by remobilization and precipitation of minerals at low-temperature in faults, fractures and geodes, interpreted as derived from reactions with sedimentary rocks and metasomatic / hydrothermal fluids with abundant carbonatization and silicification.

Integração ensino e serviço: dizer e fazer saúde na atenção básica

The current discussion on Education and Health has shown the need for greater integration between health services and academia, and this issue has been addressed by researchers in the area as being of great importance. How do we say what we need to do? The National Policy on Education Permanent Health proposes the dissemination of pedagogical skills at SUS, so that the public health clearance to constitute an area of teaching and learning in work performance. This study aimed to know how is the process of integration between education and health services in primary health care, from the knowledge on the role of mentors in the training of undergraduate students in the healthcare field in UFRN. Qualitative Methodology possible, from the use of the techniques of Semi-Structured Interview and Direct Observation of achieving this goal. The analysis of data taken from the Hermeneutic-Dialectic Approach, taking as mediators knowledge of the areas of Education, Health Education and Public Health, showed that the performance of preceptors constitutes an important strategy to enable the integration of teaching and service, and the professionals involved in the preceptorship educate themselves while they educate. The educational process is permeated by knowledge and experiences heterogeneous, highly favorable to the training of students and professionals factor. Innovative educational practices proven capable of starting the mediation of preceptors and other professionals involved in the Work Programme Education for Health, extend learning. The curriculum components Integrated Activity of Health, Education and Citizenship, and Tutorial Program for Integrated Health Work chosen as the basis for this experiment set, for preceptors, the need to seek new knowledge, allowing each actor transcend its specific area of academic training and interact with other areas, which makes learning interesting, enjoyable and meaningful.

Analisi della propagazione elettrica nel tessuto cardiaco mediante simulazione numerica implementata su GPU

Il segnale elettrico si propaga nel tessuto cardiaco attraverso gap-junctions che si trovano tra i miociti cardiaci e in ciascuno di essi si avvia un processo chiamato potenziale d'azione (PA). In questa tesi prenderò in considerazione il modello Luo-Rudy 1991 e il difetto oggetto di studio sono le Early Afterdepolarizations (EADs). Si analizzerà la propagazione del potenziale d’azione in un cavo di 300 cellule. Dopo alcune simulazioni preliminari è emersa l’utilità di trovare una soluzione che permettesse di ridurre i tempi di calcolo, il modello è stato quindi implementato in CUDA. Il lavoro è stato sviluppato nei seguenti step: 1) l’impiego dell’ambiente di calcolo MATLAB per implementare il modello, descrivendo ogni cellula attraverso il modello Luo-Rudy 1991 e l’interazione elettrica inter-cellulare, considerando un cavo di 300 cellule; 2) individuazione dei parametri che, adeguatamente modificati, sono in grado di indurre EADs a livello single cell; 3) implementazione del modello in CUDA, creando uno strumento che potrà essere utilizzato per aumentare notevolmente il numero delle simulazioni nell’unità di tempo; 4) messa a punto di un criterio per valutare in modo conciso la bontà (safety factor) della relazione source-sink. L’utilità di un simile criterio è quella di valutare, sia nel caso di propagazione di AP che in quello di eventuale propagazione di EADs, la propensione alla propagazione in un tessuto. Il primo capitolo descriverà il potenziale d’azione, il modello usato e la teoria del cavo. Il secondo capitolo discuterà l’implementazione del modello usato, descriverà CUDA e come il modello sia stato implementato. Il terzo capitolo riguarderà i primi risultati ottenuti dalle simulazioni e come la variazione dei parametri influisce sulla forma delle EADs. L’ultimo capitolo approfondirà i requisiti necessari per far avvenire una propagazione in un cavo.

Projeto CLIK2GET - sistema agregador de tecnologias que facilitem a integração de aplicativos gamificados

Relatório de estágio para obtenção de grau de mestre na área de Educação e Comunicação Multimédia

Interfaces naturais : exploração e integração de plataformas em contexto educativo

Relatório de estágio para a obtenção do grau de mestre na área de Educação e Comunicação Multimédia

As relações de interação e integração entre cérebro, corpo-propriamente-dito e meio-ambiente na constituição da mente consciente

This dissertation will be marked by our proposal to hold a theoretical perspective to the classical mind-body problem, and more precisely for the defense of the idea that consciousness (or conscious mind) emerges from the interaction and integration relationships between body proper, brain and environment. This purpose will lead us to assume an alternative position with respect to the more traditional perspectives to the mind-body problem, ie an alternative perspective not only in relation to the dualistics forms of mind-body, but also in regards to the reductive physicalists, which usually reduces mind to brain. Aiming to support a position that both avoid the idea that mind and body are distinct substances and the theory that the brain explains the consciousness in its totality, we will dedicate an important part of this work to explain how the structure of consciousness depends significantly of the body proper and the bodily information mechanisms as well as the environment and the physiological mechanisms through which we place ourselves in space, in front of us and the other bodies (organic and inorganic). Given that the relationship between brain, body and environment involves different mental levels — from the most primitive and unconscious mental mechanisms until conscious and sophisticated levels — we will proceed to the task of assuming a model to explain in what sense these levels contribute to that our instincts and the most sophisticated dimensions of our mental life are part of the one and the same process, which is why we will structure our argument from the ideia that mind, self, and consciousness are the different hierarchical levels which make up the totality of our psychic life and therefore organic one. Imbued with this conceptual approach, we will advance to the focus of this work, namely the reasons that will lead us to give a prominent role to the body proper and the environment in the constitution of the conscious mind, or even the reasons that will lead us to defend the thesis according to which we are embodied and situated, as well as the reasons that will lead us to reject the theoretical positions that dichotomize man and world. In order to support the thesis that we are embodied and situated, and therefore with the purpose of overcoming the theoretical paradigms that dichotomize consciousness and world, we will turn out to the authors and the perspectives we believe to be more successful in this endeavor, including the phenomenological approaches to bodily self-consciousness, the enactivists perspectives and the researches dedicated to mapping the interaction and integration relationships between brain, body and environment. To achieve our goals, the dissertation will be divided into two chapters: the first chapter will emphasize in what way the structuring of consciousness depends on the body proper and the environment, while in the second chapter we will resort to the phenomenological dimensions of bodily self-consciousness, emphasizing the bodily information channels that provide us the immediate certainty, in a first person perspective, that the self is bodily in a non-metaphorical sense.