Skull and mandible formation in the cuckoo (Aves, Cuculidae): Contributions to the nomenclature in avian osteology and systematics

The study of the contributions of different bones to the formation of the skeleton in birds is necessary: (1) to establish homologies in comparative anatomy; (2) to delimit each bone structure correctly, mainly in relation to the skull and mandible where the bones are fused to each other in adults; and (3) to standardize nomenclature in avian osteology. In this paper at least one young specimen belonging to each sub-family of Cuculidae was examined in order to identify each bone in terms of boundaries and contributions to skull and mandible formation. These cuckoos specimens were also compared with adults and young of turacos and hoatzin. The results show little variation of skull and jaw among the young cuckoos studied compared with the variations among adult specimens. However, it provides new suggestions for the boundaries and nomenclature of certain osseous structures in the skull and mandible of birds, specifically fissura zona flexoria craniofacialis, prominetia frontoparietalis, crista temporalis transversa, processus squamosalis, fossa laterosphenoidalis, tuberculum laterosphenoidale and processus retroangularis. This study also provides more reliable homologies for use in cladistic analysis and above all it contributes to the phylogenetic position of Cuculidae within Neognathae, specifically the skull formation suggest that turacos and hoatzin are more similar to each other than either is to the cuckoos. © 2005 Taylor & Francis.

The first Triassic lungfish from South America (Santa Maria Formation, Paraná Basin) and its bearing on geological correlations within Pangaea

The Triassic fish faunas of the Southern Hemisphere are only known from a few sedimentary basins and the most productive sites are those from the Karoo Supergroup, in South Africa and the Sydney Basin of Australia. A single lungfish tooth plate ascribed to Ptychoceratodus cf. philippsi was recovered from Late Triassic (Carnian) red beds of southern Brazil and is described herein. This find extends to South America the palaeogeographic distribution of the genus, which occurs in the Early Triassic of Australia and South Africa and the Middle/Late Triassic of Europe and Late Triassic of Madagascar and India. The presence of this dipnoan solely in the uppermost part of the Santa Maria Formation suggests that the migration of Ptychoceratodus towards the Paraná Basin began not before the late Induan/early Olenekian (late Early Triassic). At that time, more humid (monsoonal) conditions prevailed in what is now southern Brazil, compared to semi-arid/desert conditions that dominated the Late Permian and possibly the earliest Early Triassic (the latter presumably not represented in the Paraná Basin). © The Geological Society of London 2008.

Treatment of gingival recession with collagen membrane and DFDBA: A histometric study in dogs

In a previous study, we evaluated the findings related to the use of resorbable collagen membranes in humans along with DFDBA (demineralized freeze-dried bone allograft). The aim of this subsequent study was to histometrically evaluate in dogs, the healing response of gingival recessions treated with collagen membrane + DFDBA (Guided Tissue Regeneration, GTR) compared to a coronally positioned flap (CPF). Two types of treatment were randomly carried out in a split-mouth study. Group 1 was considered as test (GTR: collagen membrane + DFDBA), whereas Group 2 stood for the control (only CPF). The dogs were given chemical bacterial plaque control with 0.2% chlorhexidine digluconate during a 90-day repair period. Afterwards, the animals were killed to obtain biopsies and histometric evaluation of the process of cementum and bone formation, epithelial migration and gingival level. A statistically significant difference was found between groups with a larger extension of neoformed cementum (GTR = 32.72%; CPF = 18.82%; p = 0.0004), new bone (GTR = 23.20%; CPF = 09.90%; p = 0.0401) and with a smaller area of residual gingival recession in the test group (GTR = 50.69%; CPF = 59.73%; p = 0.0055) compared to the control group. The only item assessed that showed no statistical difference was epithelial proliferation on the root surface, with means of 15.14% for the GTR group and 20.34% for the CPF group (p = 0.0890). Within the limits of this study we concluded that the treatment of gingival recession defects with GTR, associating collagen membrane with DFDBA, showed better outcomes in terms of a larger extension of neoformed cementum and bone, as well as in terms of a smaller proportion of residual recessions.

Structural change and productivity growth, 20 years later: old problems, new opportunities

Includes bibliography

Othonella araguaiana (Bivalvia, Megadesmidae) from the Corumbataí formation (Midlle Permian), eastern margin of the Paraná Basin: Systematic, evolutionary and biostratigraphic significances

In this study, the occurrence of Othonella araguaiana Mendes, a rare bivalve species is reported for the fi rst time in the Pinzonella illusa biozone, Middle Permian Corumbataí Formation, in the State of São Paulo. This species was originally described in coeval rocks of the Estrada Nova Formation (= Corumbataí) from the Alto Araguaia and Alto Garças regions, State of Mato Grosso. The specimens of O. araguaiana were found in the base of a bioclastic sandstone bed, a proximal tempestite, in the middle of the Corumbataí Formation, in the city of Rio Claro, São Paulo State. The silicifi ed shells and internal molds are well preserved, showing impressions of muscle scars and other internal anatomic characters (e.g., hinge), never illustrated by previous authors. In his original description, Mendes (1963) called attention to the similarity between O. araguaiana and Terraia aequilateralis, a common veneroid of the Corumbataí Formation. Conversely, Runnegar and Newell (1971) suggested that O. araguaiana belongs to Megadesmidae, being a junior synonym of Plesiocyprinella carinata (the commonest megadesmid of the Passa Dois Group). Our study indicates that O. araguaiana is indeed a megadesmid, but is distinct from the P. carinata. The new occurrence of O. araguaiana demonstrates that a) the paleobiogeographic distribution of this species is wider than previously thought (that it was restricted to the northern part of Paraná Basin, Mato Grosso State); b) the molluscan fauna of the Corumbataí Formation (P. illusa biozone) in the State of São Paulo is more diverse and dominated by megadesmids; and c) the composition of the molluscan fauna of the Corumbataí Formation in Alto Garças, State of Mato Grosso, is essentially the same as that of the P. illusa biozone of the eastern margin of the Paraná Basin.

The formation of the professionals for the timber industrial sector of the civil construction

The common point between the two forms of production of the wood-based sector in Brazil, one practically manufacturing and the other high technology, is in the qualification of the of the labor. In both cases, the professionals are being formed directly in the productive line and rarely with qualification in the academic area. There is not a public political education for the qualification of the labor, and the work market that does not demand qualified professionals, contributes for the sector stagnation. So, in order to excel the socio-cultural barriers in relation to the use of wood in the buildings, new attitudes are necessary in the teaching of the contents of the curricular programs, mainly, in formation of the architect and civil engineering.

Two stops in today's new global geographies: shaping novel labor supplies and employment regimes

Includes bibliography

Histological outcomes on the development of new space-making devices for maxillary sinus floor augmentation

Background: Previous studies have pointed out that the mere elevation of the maxillary sinus membrane promotes bone formation without the use of augmentation materials. Purpose: This experimental study aimed at evaluating if the two-stage procedure for sinus floor augmentation could benefit from the use of a space-making device in order to increase the bone volume to enable later implant installation with good primary stability. Materials and Methods: Six male tufted capuchin primates (Cebus apella) were subjected to extraction of the three premolars and the first molar on both sides of the maxilla to create an edentulous area. The sinuses were opened using the lateral bone-wall window technique, and the membrane was elevated. One resorbable space-making device was inserted in each maxillary sinus, and the bone window was returned in place. The animals were euthanatized after 6 months, and biopsy blocks containing the whole maxillary sinus and surrounding soft tissues were prepared for ground sections. Results: The histological examination of the specimens showed bone formation in contact with both the schneiderian membrane and the device in most cases even when the device was displaced. The process of bone formation indicates that this technique is potentially useful for two-stage sinus floor augmentation. The lack of stabilization of the device within the sinus demands further improvement of space-makers for predictable bone augmentation. Conclusions: It is concluded that (1) the device used in this study did not trigger any important inflammatory reaction; (2) when the sinus membrane was elevated, bone formation was a constant finding; and (3) an ideal space-making device should be stable and elevate the membrane to ensure a maintained connection between the membrane and the secluded space. © 2009 Wiley Periodicals, Inc.

Oral granuloma formation after injection of cosmetic filler

The increased use of orofacial fillers in cosmetic procedures has led to new diagnostic challenges for dentists and oral pathologists. Here, we describe a case with multiple oral foreign body granulomas, which were formed after a polymethylmetacrylate injection for cosmetic purposes. © 2011 European Association for Cranio-Maxillo-Facial Surgery.

Capital formation in Latin America: one and a half century of macroeconomic dynamics

Includes bibliography

New methodology for a faster synthesis of SrSnO3 by the modified Pechini method

SrSnO3, a perovskite-type complex oxide, was synthesized by the modified Pechini method using two different precursors, tin chloride and metallic tin. The first one is already traditional in the literature and it claims about 30 days, only for the cleaning of tin citrate aiming at the elimination of the chloride. The second route was developed by our research group and saves time, taking 6 h to complete the synthesis of the resin. The results show that SrSnO3 obtained from the metallic tin show a higher short range order, leading to a band gap value higher than those reported in the literature, besides a meaningful reduction in the formation of SrCO 3, as compared to the one obtained from tin chloride.

Structural change and productivity growth 20 years later: old problems, new opportunities. Summary

Includes bibliography

Bone marrow aspirate combined with low-level laser therapy: A new therapeutic approach to enhance bone healing

This study evaluated the influence of bone marrow aspirate (BMA), low-level laser therapy (LLLT) and their combination on bone healing in surgically created critical-size defects (CSDs) in rat calvaria. 40 rats were divided into four groups: C (control), BMA, LLLT and BMA/LLLT. A 5 mm diameter CSD was created in the calvarium of each animal. In Group C, the defect was filled by blood clot only. In Group BMA, the defect was filled with BMA. In groups LLLT and BMA/LLLT, the defect received laser irradiation (InGaAlP laser), was filled with blood clot or BMA respectively, and irradiated again. Animals were euthanized 30 days postoperatively. Histomorphometric and immunohistochemical analyses were performed. Newly formed bone area (NFBA) was calculated as percentage of the total area of the original defect. Proliferating cell nuclear antigen (PCNA), runt-related transcription factor 2 (Runx2) and osteocalcin (OCN) immunohistochemical staining were performed. PCNA-positive, Runx2-positive and OCN-positive cells were quantified. Data were statistically analyzed. Group BMA/LLLT had significantly greater NFBA than groups C, BMA or LLLT. Group BMA presented significantly greater NFBA than control, while group LLLT did not. Group BMA/LLLT presented a significantly higher number of PCNA-positive and OCN-positive cells than any of the other groups. Groups BMA/LLLT and BMA showed a significantly lower number of Runx2-positive cells than groups C or LLLT. The combination of BMA/LLLT yielded significantly greater bone formation in surgically created CSD in rat calvaria when compared to control, or either treatment alone. © 2013 Elsevier B.V. All rights reserved.

In Situ Formation of Dendrites in Eumelanin Thin Films between Gold Electrodes

Eumelanin is a ubiquitous pigment in the human body, animals, and plants, with potential for bioelectronic applications because of its unique set of physical and chemical properties, including strong UV-vis absorption, mixed ionic/electronic conduction, free radical scavenging and anti-oxidant properties. Herein, a detailed investigation is reported of eumelanin thin films grown on substrates patterned with gold electrodes as a model system for device integration, using electrical measurements, atomic force microscopy, scanning electron microscopy, fluorescence microscopy, and time-of-flight secondary ion mass spectroscopy. Under prolonged electrical biasing in humid air, one can observe gold dissolution and formation of gold-eumelanin nanoaggregates, the assembly of which leads to the formation of dendrites forming conductive pathways between the electrodes. Based on results collected with eumelanins from different sources, a mechanism is proposed for the formation of the nanoaggregates and dendrites, taking into account the metal binding properties of eumelanin. The surprising interaction between eumelanin and gold points to new opportunities for the fabrication of eumelanin-gold nanostructures and biocompatible memory devices and should be taken into account in the design of devices based on eumelanin thin films. © 2013 WILEY-VCH Verlag GmbH & Co.

New gymnospermous woods from the Permian of the Parnaíba Basin, Northeastern Brazil, Part II: Damudoxylon, Kaokoxylon and Taeniopitys

This is the second contribution on the Permian permineralized flora of the Parnaíba Basin, NE Brazil that focuses on the gymnosperm woods from the Motuca Formation. We describe five new species of gymnospermous woods Damudoxylon buritiranaense sp. nov., Damudoxylon humile sp. nov., Damudoxylon roessleri sp. nov., Kaokoxylon punctatum sp. nov. and Taeniopitys tocantinensis sp. nov., and one new form, Taeniopitys sp. 1. The woods vary widely in their anatomy, mainly in their pith features, from simple parenchymatic to solenoid piths with canals and ducts, as well as different cells, such as secretory and sclerenchymatic ones. However, they have one characteristic in common - araucarian pitting in the radial walls of the tracheids. © 2013 Elsevier B.V.