An Ultrasonic Relaxation Study of 1-Alkyl-3-Methylmidazolium-Based Room Temperature Ionic Liquids: Probing the Role of Alkyl Chain Length in the Cation

Ultrasound absorption spectra of four 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide were determined as a function of the alkyl chain length on the cation from 1-propyl- to 1-hexyl- from 293.15 to 323.15 K at ambient pressure. Herein, the ultrasound absorption measurements were carried out using a standard pulse technique within a frequency range from 10 to 300 MHz. Additionally the speed of sound, density and viscosity have been measured. The presence of strong dissipative processes during the ultrasound wave propagation was found experimentally, i.e. relaxation processes in the megahertz range were observed for all compounds over the whole temperature range. The relaxation spectra (both relaxation amplitude and relaxation frequency) were shown to be dependent on the alkyl side chain length of the 1-alkyl-3-methylimidazolium ring. In most cases, a single Debye model described the absorption spectra very well. However, a comparison of the determined spectra with the spectra of a few other imidazolium-based ionic liquids reported in the literature (in part recalculated in this work) shows that the complexity of the spectra increases rapidly with the elongation of the alkyl chain length on the cation. This complexity indicates that both the volume viscosity and the shear viscosity are involved in relaxation processes even in relatively low frequency ranges. As a consequence, the sound velocity dispersion is present at relatively low megahertz frequencies.

Nurturing attachments in looked after children: a feasibility study of a group-based programme for carers

Introduction: The attachment related difficulties of Looked after Children are well recognised in literature with difficulties linked to early experiences hypothesised to be perpetuated by experiences of the care system itself. Recent policy guidelines have emphasised the importance of relationships for children in care, one of the most important being with their primary carer. Golding (2014) published a group format training resource entitled ‘Nurturing Attachments’ which aims to promote ‘therapeutic parenting’; however there is limited knowledge on the feasibility of this intensive approach.
Aims: To assess the feasibility of Nurturing Attachments through exploring (i.) recruitment, retention and attrition, (ii.) initial outcomes, (iii.) acceptability and (iv.) ability of the programme to be delivered in line with the manual content and structure.
Method Two Health and Social Care Trusts in NI participated in the study by facilitating a Nurturing Attachments group in each site with adoptive parents, foster carers and kinship carers (N = 26). Carers completed pre and post measures to explore initial outcome, completing an evaluation questionnaire to explore acceptability. Acceptability was also explored with Trust stakeholders and group facilitators through focus group and interview. To explore if the manual can be delivered as intended, each group completed debrief tools.
Results: The overall response rate for uptake was 13.9%, which impacted on engagement for a ‘treatment as usual’ group. Once engaged in the programme, attrition was low and attendance was high. Initial outcomes have shown positive effects for both young person and carers. Feedback suggests a positive response regarding acceptability with limited expressed concern. The manual can be delivered in a standardised way; however can be flexible enough to allow for group processes.
Conclusions: Further research is needed to continue to explore efficacy, however the current study has provided supporting evidence that Nurturing Attachments as an intervention has positively impacted on many levels of the LAAC system.

Lattice-based Encryption Over Standard Lattices in Hardware

Lattice-based cryptography has gained credence recently as a replacement for current public-key cryptosystems, due to its quantum-resilience, versatility, and relatively low key sizes. To date, encryption based on the learning with errors (LWE) problem has only been investigated from an ideal lattice standpoint, due to its computation and size efficiencies. However, a thorough investigation of standard lattices in practice has yet to be considered. Standard lattices may be preferred to ideal lattices due to their stronger security assumptions and less restrictive parameter selection process. In this paper, an area-optimised hardware architecture of a standard lattice-based cryptographic scheme is proposed. The design is implemented on a FPGA and it is found that both encryption and decryption fit comfortably on a Spartan-6 FPGA. This is the first hardware architecture for standard lattice-based cryptography reported in the literature to date, and thus is a benchmark for future implementations.
Additionally, a revised discrete Gaussian sampler is proposed which is the fastest of its type to date, and also is the first to investigate the cost savings of implementing with lamda_2-bits of precision. Performance results are promising in comparison to the hardware designs of the equivalent ring-LWE scheme, which in addition to providing a stronger security proof; generate 1272 encryptions per second and 4395 decryptions per second.

A systematic review of evidence-based assessment practices by allied health practitioners for children with cerebral palsy

AIM: The routine use of psychometrically robust assessment tools is integral to best practice. This systematic review aims to determine the extent to which evidence-based assessment tools were used by allied health practitioners for children with cerebral palsy (CP).

METHOD: The Preferred Reporting Items for Systematic Reviews and Meta-Analysis protocols 2015 was employed. A search strategy applied the free text terms: 'allied health practitioner', 'assessment', and 'cerebral palsy', and related subject headings to seven databases. Included articles reported assessment practices of occupational therapists, physiotherapists, or speech pathologists working with children with CP aged 0 to 18 years, published from the year 2000.

RESULTS: Fourteen articles met the inclusion criteria. Eighty-eight assessment tools were reported, of which 23 were in high use. Of these, three tools focused on gross motor function and had acceptable validity for use with children with CP: Gross Motor Function Measure, Gross Motor Function Classification System, and goniometry. Validated tools to assess other activity components, participation, quality of life, and pain were used infrequently or not at all.

INTERPRETATION: Allied health practitioners used only a few of the available evidence-based assessment tools. Assessment findings in many areas considered important by children and families were rarely documented using validated assessment tools.

The effectiveness of peer mentoring in promoting a positive transition to higher education for first-year undergraduate students: a mixed methods systematic review protocol

Background: The global transfer of nursing and midwifery education to higher education institutes has led to student nurses and midwives experiencing challenges previously faced by traditional third-level students, including isolation, loneliness, financial difficulties and academic pressure. These challenges can contribute to increased stress and anxiety levels which may be detrimental to the successful transition to higher education, thus leading to an increase in attrition rates. Peer mentoring as an intervention has been suggested to be effective in supporting students in the transition to third-level education through enhancing a sense of belongingness and improving student satisfaction, engagement and retention rates. This proposed systematic review aims to determine the effectiveness of peer mentoring in enhancing levels of student engagement, sense of belonging and overall satisfaction of first-year undergraduate students following transition into higher education.
Methods: MEDLINE, Web of Knowledge, ProQuest, Embase, CINAHL, ERIC, PsycINFO and CENTRAL databases will be searched for qualitative, quantitative and mixed methods studies on the implementation of peer assessment strategies in higher education institutes (HEIs) or universities for full-time, first-year adult students (>17 years). Included studies will be limited to the English language. The quality of included studies will be assessed using a validated Mixed Methods Appraisal Tool (MMAT). The findings will be presented as a narrative synthesis or meta-analysis as appropriate following sequential explanatory synthesis.
Discussion: The review will provide clear, non-biased evidence-based guidance to all third-level educators on the effectiveness of peer-mentoring programmes for first-year undergraduates. The review is necessary to help establish which type of peer mentoring is most effective. The evidence from qualitative and quantitative studies drawn from the international literature will be utilised to illustrate the best way to implement and evaluate peer mentoring as an effective intervention and will be useful in guiding future research and practice in this area. These findings may be applied internationally across all disciplines.

The effectiveness, acceptability and cost-effectiveness of psychosocial interventions for maltreated children and adolescents: An evidence synthesis

DESIGN We will address our research objectives by searching the published and unpublished literature and conducting an evidence synthesis of i) studies of the effectiveness of psychosocial interventions provided for children and adolescents who have suffered maltreatment, ii) economic evaluations of these interventions and iii) studies of their acceptability to children, adolescents and their carers. SEARCH STRATEGY: Evidence will be identified via electronic databases for health and allied health literature, social sciences and social welfare, education and other evidence based depositories, and economic databases. We will identify material generated by user-led,voluntary sector enquiry by searching the internet and browsing the websites of relevant UK government departments and charities. Additionally, studies will be identified via the bibliographies of retrieved articles/reviews; targeted author searches; forward citation searching. We will also use our extensive professional networks, and our planned consultations with key stakeholders and our study steering committee. Databases will be searched from inception to time of search. REVIEW STRATEGY Inclusion criteria: 1) Infants, children or adolescents who have experienced maltreatment between the ages of 0 17 years. 2) All psychosocial interventions available for maltreated children and adolescents, by any provider and in any setting, aiming to address the sequelae of any form of maltreatment, including fabricated illness. 3) For synthesis of evidence of effectiveness: all controlled studies in which psychosocial interventions are compared with no-treatment, treatment as usual, waitlist or other-treated controls. For a synthesis of evidence of acceptability we will include any design that asks participants for their views or provides data on non-participation. For decision-analytic modelling we may include uncontrolled studies. Primary and secondary outcomes will be confirmed in consultation with stakeholders. Provisional primary outcomes are psychological distress/mental health (particularly PTSD, depression and anxiety, self-harm); ii) behaviour; iii) social functioning; iv) cognitive / academic attainment, v) quality of life, and vi) costs. After studies that meet the inclusion criteria have been identified (independently by two reviewers), data will be extracted and risk of bias (RoB) assessed (independently by two reviewers) using the Cochrane Collaboration RoB Tool (effectiveness), quality hierarchies of data sources for economic analyses (cost-effectiveness) and the CASP tool for qualitative research (acceptability). Where interventions are similar and appropriate data are available (or can be obtained) evidence synthesis will be performed to pool the results. Where possible, we will explore the extent to which age, maltreatment history (including whether intra- or extra-familial), time since maltreatment, care setting (family / out-of-home care including foster care/residential), care history, and characteristics of intervention (type, setting, provider, duration) moderate the effects of psychosocial interventions. A synthesis of acceptability data will be undertaken, using a narrative approach to synthesis. A decision-analytic model will be constructed to compare the expected cost-effectiveness of the different types of intervention identified in the systematic review. We will also conduct a Value of information analysis if the data permit. EXPECTED OUTPUTS: A synthesis of the effectiveness and cost effectiveness of psychosocial interventions for maltreated children (taking into account age, maltreatment profile and setting) and their acceptability to key stakeholders.

STUDENT’ S ENGAGEMENT IN SCHOOL: A LITERATURE REVIEW

Students’ Engagement in School has been the focus of debate concerning academic success and school dropout, and pointed out as a mean to address the problems affecting our schools and their students, not only for having value in itself, but also for being an important mediator between several academic variables. This paper reviews the research and literature on this concept and its relations with personal and contextual variables, as well as with academic performance, with the aim of summarizing the main relationships found. Literature presents a significant number of studies which sustain that personal variables, such as self-efficacy and self-concept, as well as contextual - peers, school, family- are related with school engagement. The adoption of mastery goals, for instance, has a positive impact on school, as they are related with the use of cognitive and self-regulatory strategies by students. Positive relationships with peers, teachers support and the quality of family relations are associated with higher levels of engagement and academic performance, while negative experiences, such as bullying, are related with educational difficulties. Following this, we reflect about the relevance of studying engagement in school, in the context of widespread financial crisis, and emphasize the need to rethink educational institutions considering the paradigmatic changes that currently occur.

Novel materials based on chitosan, its derivatives and cellulose fibres

O presente trabalho tem como principal objectivo o desenvolvimento de novos materiais baseados em quitosano, seus derivados e celulose, na forma de nanofibras ou de papel. Em primeiro lugar procedeu-se à purificação das amostras comerciais de quitosano e à sua caracterização exaustiva em termos morfológicos e físicoquímicos. Devido a valores contraditórios encontrados na literatura relativamente à energia de superfície do quitosano, e tendo em conta a sua utilização como precursor de modificações químicas e a sua aplicação em misturas com outros materiais, realizou-se também um estudo sistemático da determinação da energia de superfície do quitosano, da quitina e seus respectivos homólogos monoméricos, por medição de ângulos de contacto Em todas as amostras comerciais destes polímeros identificaram-se impurezas não polares que estão associadas a erros na determinação da componente polar da energia de superfície. Após a remoção destas impurezas, o valor da energia total de superfície (gs), e em particular da sua componente polar, aumentou consideravelmente. Depois de purificadas e caracterizadas, algumas das amostras de quitosano foram então usadas na preparação de filmes nanocompósitos, nomeadamente dois quitosanos com diferentes graus de polimerização, correspondentes derivados solúveis em água (cloreto de N-(3-(N,N,N-trimetilamónio)-2- hidroxipropilo) de quitosano) e nanofibras de celulose como reforço (celulose nanofibrilada (NFC) e celulose bacteriana (BC). Estes filmes transparentes foram preparados através de um processo simples e com conotação ‘verde’ pela dispersão homogénea de diferentes teores de NFC (até 60%) e BC (até 40%) nas soluções de quitosano (1.5% w/v) seguida da evaporação do solvente. Os filmes obtidos foram depois caracterizados por diversas técnicas, tais como SEM, AFM, difracção de raio-X, TGA, DMA, ensaios de tracção e espectroscopia no visível. Estes filmes são altamente transparentes e apresentam melhores propriedades mecânicas e maior estabilidade térmica do que os correspondentes filmes sem reforço. Outra abordagem deste trabalho envolveu o revestimento de folhas de papel de E. globulus com quitosano e dois derivados, um derivado fluorescente e um derivado solúvel em água, numa máquina de revestimentos (‘máquina de colagem’) à escala piloto. Este estudo envolveu inicialmente a deposição de 1 a 5 camadas do derivado de quitosano fluorescente sobre as folhas de papel de forma a estudar a sua distribuição nas folhas em termos de espalhamento e penetração, através de medições de reflectância e luminescência. Os resultados mostraram que, por um lado, a distribuição do quitosano na superfície era homogénea e que, por outro lado, a sua penetração através dos poros do papel cessou após três deposições. Depois da terceira camada verificou-se a formação de um filme contínuo de quitosano sobre a superfície do papel. Estes resultados mostram que este derivado de quitosano fluorescente pode ser utilizado como marcador na optimização e compreensão de mecanismos de deposição de quitosano em papel e outros substratos. Depois de conhecida a distribuição do quitosano nas folhas de papel, estudou-se o efeito do revestimento de quitosano e do seu derivado solúvel em água nas propriedades finais do papel. As propriedades morfológicas, mecânicas, superficiais, ópticas, assim como a permeabilidade ao ar e ao vapor de água, a aptidão à impressão e o envelhecimento do papel, foram exaustivamente avaliadas. De uma forma geral, os revestimentos com quitosano e com o seu derivado solúvel em água tiveram um impacto positivo nas propriedades finais do papel, que se mostrou ser dependente do número de camadas depositadas. Os resultados também mostraram que os papéis revestidos com o derivado solúvel em água apresentaram melhores propriedades ópticas, aptidão à impressão e melhores resultados em relação ao envelhecimento do que os papéis revestidos com quitosano. Assim, o uso de derivados de quitosano solúveis em água em processos de revestimento de papel representa uma estratégia bastante interessante e sustentável para o desenvolvimento de novos materiais funcionais ou na melhoria das propriedades finais dos papéis. Por fim, tendo como objectivo valorizar os resíduos e fracções menos nobres da quitina e do quitosano provenientes da indústria transformadora, estes polímeros foram convertidos em polióis viscosos através de uma reacção simples de oxipropilação. Este processo tem também conotação "verde" uma vez que não requer solvente, não origina subprodutos e não exige nenhuma operação específica (separação, purificação, etc) para isolar o produto da reacção. As amostras de quitina e quitosano foram pré-activadas com KOH e depois modificadas com um excesso de óxido de propileno (PO) num reactor apropriado. Em todos os casos, o produto da reacção foi um líquido viscoso composto por quitina ou quitosano oxipropilados e homopolímero de PO. Estas duas fracções foram separadas e caracterizadas.

Subspace-based techniques and applications

Este trabalho focou-se no estudo de técnicas de sub-espaço tendo em vista as aplicações seguintes: eliminação de ruído em séries temporais e extracção de características para problemas de classificação supervisionada. Foram estudadas as vertentes lineares e não-lineares das referidas técnicas tendo como ponto de partida os algoritmos SSA e KPCA. No trabalho apresentam-se propostas para optimizar os algoritmos, bem como uma descrição dos mesmos numa abordagem diferente daquela que é feita na literatura. Em qualquer das vertentes, linear ou não-linear, os métodos são apresentados utilizando uma formulação algébrica consistente. O modelo de subespaço é obtido calculando a decomposição em valores e vectores próprios das matrizes de kernel ou de correlação/covariância calculadas com um conjunto de dados multidimensional. A complexidade das técnicas não lineares de subespaço é discutida, nomeadamente, o problema da pre-imagem e a decomposição em valores e vectores próprios de matrizes de dimensão elevada. Diferentes algoritmos de préimagem são apresentados bem como propostas alternativas para a sua optimização. A decomposição em vectores próprios da matriz de kernel baseada em aproximações low-rank da matriz conduz a um algoritmo mais eficiente- o Greedy KPCA. Os algoritmos são aplicados a sinais artificiais de modo a estudar a influência dos vários parâmetros na sua performance. Para além disso, a exploração destas técnicas é extendida à eliminação de artefactos em séries temporais biomédicas univariáveis, nomeadamente, sinais EEG.

Mining biomedical information from scientific literature

The rapid evolution and proliferation of a world-wide computerized network, the Internet, resulted in an overwhelming and constantly growing amount of publicly available data and information, a fact that was also verified in biomedicine. However, the lack of structure of textual data inhibits its direct processing by computational solutions. Information extraction is the task of text mining that intends to automatically collect information from unstructured text data sources. The goal of the work described in this thesis was to build innovative solutions for biomedical information extraction from scientific literature, through the development of simple software artifacts for developers and biocurators, delivering more accurate, usable and faster results. We started by tackling named entity recognition - a crucial initial task - with the development of Gimli, a machine-learning-based solution that follows an incremental approach to optimize extracted linguistic characteristics for each concept type. Afterwards, Totum was built to harmonize concept names provided by heterogeneous systems, delivering a robust solution with improved performance results. Such approach takes advantage of heterogenous corpora to deliver cross-corpus harmonization that is not constrained to specific characteristics. Since previous solutions do not provide links to knowledge bases, Neji was built to streamline the development of complex and custom solutions for biomedical concept name recognition and normalization. This was achieved through a modular and flexible framework focused on speed and performance, integrating a large amount of processing modules optimized for the biomedical domain. To offer on-demand heterogenous biomedical concept identification, we developed BeCAS, a web application, service and widget. We also tackled relation mining by developing TrigNER, a machine-learning-based solution for biomedical event trigger recognition, which applies an automatic algorithm to obtain the best linguistic features and model parameters for each event type. Finally, in order to assist biocurators, Egas was developed to support rapid, interactive and real-time collaborative curation of biomedical documents, through manual and automatic in-line annotation of concepts and relations. Overall, the research work presented in this thesis contributed to a more accurate update of current biomedical knowledge bases, towards improved hypothesis generation and knowledge discovery.

Electromechanical properties of engineered lead free potassium sodium niobate based materials

K0.5Na0.5NbO3 (KNN), is the most promising lead free material for substituting lead zirconate titanate (PZT) which is still the market leader used for sensors and actuators. To make KNN a real competitor, it is necessary to understand and to improve its properties. This goal is pursued in the present work via different approaches aiming to study KNN intrinsic properties and then to identify appropriate strategies like doping and texturing for designing better KNN materials for an intended application. Hence, polycrystalline KNN ceramics (undoped, non-stoichiometric; NST and doped), high-quality KNN single crystals and textured KNN based ceramics were successfully synthesized and characterized in this work. Polycrystalline undoped, non-stoichiometric (NST) and Mn doped KNN ceramics were prepared by conventional ceramic processing. Structure, microstructure and electrical properties were measured. It was observed that the window for mono-phasic compositions was very narrow for both NST ceramics and Mn doped ceramics. For NST ceramics the variation of A/B ratio influenced the polarization (P-E) hysteresis loop and better piezoelectric and dielectric responses could be found for small stoichiometry deviations (A/B = 0.97). Regarding Mn doping, as compared to undoped KNN which showed leaky polarization (P-E) hysteresis loops, B-site Mn doped ceramics showed a well saturated, less-leaky hysteresis loop and a significant properties improvement. Impedance spectroscopy was used to assess the role of Mn and a relation between charge transport – defects and ferroelectric response in K0.5Na0.5NbO3 (KNN) and Mn doped KNN ceramics could be established. At room temperature the conduction in KNN which is associated with holes transport is suppressed by Mn doping. Hence Mn addition increases the resistivity of the ceramic, which proved to be very helpful for improving the saturation of the P-E loop. At high temperatures the conduction is dominated by the motion of ionized oxygen vacancies whose concentration increases with Mn doping. Single crystals of potassium sodium niobate (KNN) were grown by a modified high temperature flux method. A boron-modified flux was used to obtain the crystals at a relatively low temperature. XRD, EDS and ICP analysis proved the chemical and crystallographic quality of the crystals. The grown KNN crystals exhibit higher dielectric permittivity (29,100) at the tetragonal-to-cubic phase transition temperature, higher remnant polarization (19.4 μC/cm2) and piezoelectric coefficient (160 pC/N) when compared with the standard KNN ceramics. KNN single crystals domain structure was characterized for the first time by piezoforce response microscopy. It could be observed that <001> - oriented potassium sodium niobate (KNN) single crystals reveal a long range ordered domain pattern of parallel 180° domains with zig-zag 90° domains. From the comparison of KNN Single crystals to ceramics, It is argued that the presence in KNN single crystal (and absence in KNN ceramics) of such a long range order specific domain pattern that is its fingerprint accounts for the improved properties of single crystals. These results have broad implications for the expanded use of KNN materials, by establishing a relation between the domain patterns and the dielectric and ferroelectric response of single crystals and ceramics and by indicating ways of achieving maximised properties in KNN materials. Polarized Raman analysis of ferroelectric potassium sodium niobate (K0.5Na0.5)NbO3 (KNN) single crystals was performed. For the first time, an evidence is provided that supports the assignment of KNN single crystals structure to the monoclinic symmetry at room temperature. Intensities of A′, A″ and mixed A′+A″ phonons have been theoretically calculated and compared with the experimental data in dependence of crystal rotation, which allowed the precise determination of the Raman tensor coefficients for (non-leaking) modes in monoclinic KNN. In relation to the previous literature, this study clarifies that assigning monoclinic phase is more suitable than the orthorhombic one. In addition, this study is the basis for non-destructive assessments of domain distribution by Raman spectroscopy in KNN-based lead-free ferroelectrics with complex structures. Searching a deeper understanding of the electrical behaviour of both KNN single crystal and polycrystalline materials for the sake of designing optimized KNN materials, a comparative study at the level of charge transport and point defects was carried out by impedance spectroscopy. KNN single crystals showed lower conductivity than polycrystals from room temperature up to 200 ºC, but above this temperature polycrystalline KNN displays lower conductivity. The low temperature (T < 200 ºC) behaviour reflects the different processing conditions of both ceramics and single crystals, which account for less defects prone to charge transport in the case of single crystals. As temperature increases (T > 200 ºC) single crystals become more conductive than polycrystalline samples, in which grain boundaries act as barriers to charge transport. For even higher temperatures the conductivity difference between both is increased due to the contribution of ionic conduction in single crystals. Indeed the values of activation energy calculated to the high temperature range (T > 300 ºC) were 1.60 and 0.97 eV, confirming the charge transport due to ionic conduction and ionized oxygen vacancies in single crystals and polycrystalline KNN, respectively. It is suggested that single crystals with low defects content and improved electromechanical properties could be a better choice for room temperature applications, though at high temperatures less conductive ceramics may be the choice, depending on the targeted use. Aiming at engineering the properties of KNN polycrystals towards the performance of single crystals, the preparation and properties study of (001) – oriented (K0.5Na0.5)0.98Li0.02NbO3 (KNNL) ceramics obtained by templated grain growth (TGG) using KNN single crystals as templates was undertaken. The choice of KNN single crystals templates is related with their better properties and to their unique domain structure which were envisaged as a tool for templating better properties in KNN ceramics too. X-ray diffraction analysis revealed for the templated ceramics a monoclinic structure at room temperature and a Lotgering factor (f) of 40% which confirmed texture development. These textured ceramics exhibit a long range ordered domain pattern consisting of 90º and 180º domains, similar to the one observed in the single crystals. Enhanced dielectric (13017 at TC), ferroelectric (2Pr = 42.8 μC/cm2) and piezoelectric (d33 = 280 pC/N) properties are observed for textured KNNL ceramics as compared to the randomly oriented ones. This behaviour is suggested to be due to the long range ordered domain patterns observed in the textured ceramics. The obtained results as compared with the data previously reported on texture KNN based ceramics confirm that superior properties were found due to ordered repeated domain pattern. This study provides an useful approach towards properties improvement of KNN-based piezoelectric ceramics. Overall, the present results bring a significant contribution to the pool of knowledge on the properties of sodium potassium niobate materials: a relation between the domain patterns and di-, ferro-, and piezo-electric response of single crystals and ceramics was demonstrated and ways of engineering maximised properties in KNN materials, for example by texturing were established. This contribution is envisaged to have broad implications for the expanded use of KNN over the alternative lead-based materials.

Peroxide-based hybrid and prodrug antimalarials to deliver cysteine protease inhibitors into the parasitic food vacuole

Tese de doutoramento, Farmácia (Química Farmacêutica e Terapêutica), Universidade de Lisboa, Faculdade de Farmácia, 2014

Students’ engagement in school and peer relations: A literature review

Este E-Book reúne um conjunto de investigações apresentadas no “I Congresso Internacional Envolvimento dos Alunos na Escola: Perspetivas da Psicologia e Educação” (ICIEAE), organizado no âmbito do “Projeto PTDC/CPE-CED/114362/2009 - Envolvimento dos Alunos na Escola: Diferenciação e Promoção” (EAE-DP), financiado pela Fundação para a Ciência e a Tecnologia (FCT).

Intramuscular Injection Technique: an Evidence-based Approach

Intramuscular injections require a thorough and meticulous approach to patient assessment and injection technique. This article, the second in a series of two, reviews the evidence base to inform safer practice and to consider the evidence for nursing practice in this area. A framework for safe practice is included, identifying important points for safe technique, patient care and clinical decision making. It also highlights the ongoing debate in selection of intramuscular injection sites, predominately the ventrogluteal and dorsogluteal muscles.

Literature Review WM9: Part I - urban freight transport, carried out as part of Work Module 1, Green Logistics Project

The review illustrates the importance of road movements in goods distribution in urban areas. It highlights the major economic, environmental and social impacts associated with this freight activity and reviews policy options available to those responsible for regulation. A wide range of possible solutions to problems posed by urban freight operations are also covered including approaches related to: consolidation, facilities, vehicle design, information capture and utilisation, and non-road modes.