Effect of light on ex situ production of symbiotic corals

The increasing interest in coral culture for biotechnological applications, to supply the marine aquarium trade, or for reef restoration programs, has prompted researchers to optimize coral culture protocols, with emphasis to ex situ production. When cultured ex situ, the growth performance of corals can be influenced by several physical, chemical and biological parameters. For corals harbouring zooxanthellae, light is one of such key factors, as it can influence the photosynthetic performance of these endosymbionts, as well as coral physiology, survival and growth. The economic feasibility of ex situ coral aquaculture is strongly dependent on production costs, namely those associated with the energetic needs directly resulting from the use of artificial lighting systems. In the present study we developed a versatile modular culture system for experimental coral production ex situ, assembled solely using materials and equipment readily available from suppliers all over the world; this approach allows researchers from different institutions to perform truly replicated experimental set-ups, with the possibility to directly compare experimental results. Afterwards, we aimed to evaluate the effect of contrasting Photosynthetically Active Radiation (PAR) levels, and light spectra emission on zooxanthellae photochemical performance, through the evaluation of the maximum quantum yield of PSII (Fv/Fm) (monitored non-invasively and non-destructively through Pulse Amplitude Modulation fluorometry, PAM), chlorophyll a content (also determined non-destructively by using the spectral reflectance index Normalized Difference Vegetation Index, NDVI), photosynthetic and accessory pigments, number of zooxanthellae, coral survival and growth. We studied two soft coral species, Sarcophyton cf. glaucum and Sinularia flexibilis, as they are good representatives of two of the most specious genera in family Alcyoniidae, which include several species with interest for biotechnological applications, as well as for the marine aquarium trade; we also studied two commercially important scleractinian corals: Acropora formosa and Stylophora pistillata. We used different light sources: hydrargyrum quartz iodide (HQI) lamps with different light color temperatures, T5 fluorescent lamps, Light Emitting Plasma (LEP) and Light Emitting Diode (LED). The results achieved revealed that keeping S. flexibilis fragments under the same light conditions as their mother colonies seems to be photobiologically acceptable for a short-term husbandry, notwithstanding the fact that they can be successfully stocked at lower PAR intensities. We also proved that low PAR intensities are suitable to support the ex situ culture S. cf. glaucum in captivity at lower production costs, since the survival recorded during the experiment was 100%, the physiological wellness of coral fragments was evidenced, and we did not detect significant differences in coral growth. Finally, we concluded that blue light sources, such as LED lighting, allow a higher growth for A. formosa and S. pistillata, and promote significant differences on microstructure organization and macrostructure morphometry in coral skeletons; these findings may have potential applications as bone graft substitutes for veterinary and/or other medical uses. Thus, LED technology seems to be a promising option for scleractinian corals aquaculture ex situ.

Caracterização experimental e modelação numérica de espumas metálicas

As espumas de alumínio são materiais ultraleves, o que as torna atractivas para um largo espectro de aplicações comerciais na área da defesa, na indústria automóvel e aeroespacial, entre outras. Actualmente, há um grande interesse na utilização de espumas de alumínio em componentes estruturais ultraleves, incorporados em sistemas de absorção de energia para protecção contra o impacto. O recurso à simulação numérica para resolver problemas de engenharia em várias áreas é cada vez mais comum. A modelação numérica dos materiais assume vital importância quando o problema envolve a análise de processos tecnológicos como, por exemplo, a conformação plástica de materiais, ou a análise de estruturas. Deste modo, torna-se imprescindível garantir que a modelação dos materiais é de tal forma rigorosa que permite simular o melhor possível o seu comportamento real nas condições concretas da análise a realizar. A forma mais comum de garantir o rigor dos modelos utilizados é a validação dos modelos numéricos tendo por base resultados experimentais. Neste trabalho, fez-se a caracterização do comportamento mecânico das espumas de alumínio com nome comercial ALPORAS!, obtidas pelo processo de fabrico denominado expansão directa do metal fundido por adição de um agente expansor. Esta caracterização consistiu num conjunto de ensaios experimentais quer no regime quasi-estático, quer no regime dinâmico. No regime quasi-estático realizaram-se ensaios de compressão uniaxial e de compressão multiaxial. Para a caracterização no regime dinâmico foram realizados ensaios em barras de Hopkinson de polimetil-metacrilato (PMMA). Com base nos resultados experimentais obtidos determinaram-se os parâmetros dos dois modelos constitutivos para espumas metálicas implementados no programa comercial Abaqus™/Explicit. Estes modelos, e os respectivos parâmetros determinados, foram validados reproduzindo numericamente alguns ensaios experimentais quasi-estáticos e dinâmicos. Assim, verificou-se a adequabilidade dos modelos em diversas condições quer em termos de esforços quer em termos de regime de taxa de deformação Por último, desenvolveu-se uma estrutura inovadora para absorção de energia durante um impacto, constituída por componentes perfilados em liga de alumínio e por componentes em espumas de alumínio. Esta estrutura foi testada exclusivamente com recurso à simulação numérica, utilizando os modelos constitutivos validados anteriormente.

A ingerência do conhecimento explícito no conhecimento tácito: a técnica Alexander e a prática e ensino da flauta

O presente trabalho é o resultado duma investigação heurística sobre os efeitos do estudo da Técnica Alexander (TA) na prática e no ensino da flauta. Submeti-me a uma centena de aulas de Técnica Alexander e procedi a uma análise reflexiva da minha aprendizagem e prática individual e pedagógica, registando a sua evolução através da progressiva incorporação dos princípios e metodologias daquela técnica. A primeira parte descreve os princípios e procedimentos da TA enquadrando-a na problemática das relações entre conhecimento tácito e explícito, nos processos de controlo motor voluntário e involuntário, e na eficácia e eficiência dos automatismos neuromusculares. A segunda parte constitui a descrição e análise do processo transformador catalisado pelo estudo da TA: modificações na coordenação muscular; na técnica respiratória; no empunhar da flauta e na preparação para a emissão da primeira nota, e na relação entre o equilíbrio do instrumento e o movimento dos dedos. Vários procedimentos e exercícios desenvolvidos para a resolução de problemas pessoais são apresentados justificando a sua eficácia. A TA não proporciona apenas alterações na coordenação muscular mas pode modificar os processos mentais. Por isso alguns princípios para uma organização eficiente da prática são discutidos e concretizados nalguns exercícios que promovem maior variabilidade, alternância entre análise e integração e clareza na concepção do gesto técnico-musical. Por último, a evolução da minha abordagem pedagógica, incorporando procedimentos inspirados na TA e desenvolvidos ao longo da investigação são ilustrados com alguns alunos. A tese argumenta que a TA pode desempenhar um papel fundamental na melhoria do desempenho dum músico e revela-se uma ferramenta pedagógica que merece ser explorada mais sistematicamente num ensino mais baseado numa experimentação guiada que promova uma maior autoconsciência dos processos neuromusculares do que na instrução prescritiva e explícita.

Expressividade e performance pianística

Esta tese consiste em uma pesquisa empírica sobre a expressividade musical. Os principais objetivos foram: identificar padrões e estratégias para o aprimoramento expressivo aplicados por profissionais de excelência; identificar como os performers conceitualizam a expressividade; identificar os principais componentes da expressividade; verificar relações entre a expressividade e o momento da performance; elaborar estratégias de estudo a partir das informações obtidas e aplicar estas estratégias na prática; verificar a sua pertinência e realizar uma avaliação qualitativa; e elaborar um modelo prático de estudo para a expressividade. Foram realizadas entrevistas com pianistas profissionais a fim de obter dados consistentes acerca da expressividade, e posteriormente foi conduzido um estudo de caso no qual estratégias de estudo sistematizadas a partir do relato dos pianistas foram aplicadas em um trabalho apoiado na autoetnografia, a fim de verificar a pertinência e realizar uma avaliação qualitativa sobre tais estratégias. Em termos gerais, os resultados indicaram que a expressividade consiste em um fenômeno de comunicação influenciado pela capacidade do intérprete em transmitir a mensagem e estrutura musical, cujos principais componentes compreendem elementos como o caráter, articulação e o fraseado. Além disso, os performers geralmente relacionam a expressividade a "modas" e tendências estético-interpretativas específicas e a elementos extramusicais. As principais estratégias pertinentes ao aprimoramento expressivo relacionam-se ao fraseado, realização de contrastes e sonoridade. A priorizar estes elementos, foi construído um modelo de estudo.

Realismo e lirismo em Terra sonâmbula, de Mia Couto, e Chuva braba, de Manuel Lopes

«Realismo e Lirismo em Terra Sonâmbula e Chuva Braba» é um trabalho de leitura que reflecte a nossa percepção em relação a dois mundos particulares que se constroem a partir das obras dos dois escritores africanos. Com efeito, optamos por uma estrutura pragmática do estudo, centrando a nossa atenção na leitura e interpretação dos romances, sem incluirmos um capítulo específico de referências teóricas. Tal estratégia permitiu cruzar o quadro conceptual com as informações textuais resultantes do processo de análise e interpretação do «corpus» do trabalho. As duas obras estabelecem pontos de intersecção no domínio linguístico e cultural como consequência de partilha de um passado histórico, político e social. A localização geográfica de Cabo Verde, a fome prolongada, por um lado, e a guerra catastrófica que abalou Moçambique entre 1976 e 1992, por outro, permitiram extrapolar recorrências temáticas inspiradas em impressões e experiências dos autores, relacionadas com práticas e vivências que, no trato literário, ganharam uma dimensão lírico-realista de grande valor hermenêutico. A insularidade e a continentalidade que opõem Cabo Verde e Moçambique, assim como a fome e a guerra que os caracterizam respectivamente, a procura de um espaço literário a partir das marcas de crioulidade e moçambicanidade compõem um conjunto de valores estéticos que configuram o imaginário cultural dos dois países africanos de língua portuguesa. Esta tese pesquisa as imagens e os aspectos fundamentais ínsitos nos dois romances, procurando mostrar até que ponto, a partir de temáticas de fome e guerra se pode construir narrativas lírico-realistas. O estudo permitiu observar que as imagens de sofrimento, desolação e desassossego constituem, geralmente, o paradigma estético da escrita lírica e realista de Mia Couto e Manuel Lopes.

Silver nanoparticles flow in an aquatic trophic chain

Silver nanoparticles (AgNP) have been produced and applied in a variety of products ranging from personal care products to food package containers, clothing and medicine utilities. The antimicrobial function of AgNP makes it very useful to be applied for such purposes. Silver (Ag) is a non-essential metal for organisms, and it has been historically present in the environment at low concentrations. Those concentrations of silver increased in the last century due to the use of Ag in the photographic industry and lately are expected to increase due to the use of AgNPs in consumer products. The presence of AgNP in the aquatic environment may pose a risk for aquatic species, and the effects can vary from lethal to sublethal effects. Moreover, the contact of aquatic organisms with AgNP may not cause immediately the death of individuals but it can be accumulated inside the animals and consequently transferred within the food chain. Considering this, the objective of this work was to study the transfer of silver nanoparticles in comparison to silver ions, which was used as silver nitrate, within an aquatic food chain model. To achieve this goal, this study was divided into four steps: the toxicity assessment of AgNP and AgNO3 to aquatic test-species, the bioaccumulation assessment of AgNP and AgNO3 by Pseudokirchneriella subcapitata and Daphnia magna under different exposure scenarios, and finally the evaluation of the trophic transfer of Ag through an experimental design that included the goldfish Carassius auratus in a model trophic chain in which all the species were exposed to the worse-case scenario. We observed that the bioconcentration of Ag by P. subcapitata is mainly driven by ionic silver, and that algae cannot internalize these AgNPs, but it does internalizes dissolved Ag. Daphnia magna was exposed to AgNP and AgNO3 through different exposure routes: water, food and both water and food. The worse-case scenario for Daphnia Ag bioaccumulation was by the joint exposure of contaminated water and food, showing that Ag body burdens were higher for AgNPs than for AgNO3. Finally, by exposing C. auratus for 10 days through contaminated water and food (supplied as D. magna), with another 7 days of depuration phase, it was concluded that the 10 days of exposure were not enough for fish to reach a plateau on Ag internal concentration, and neither the 7 days of elimination were sufficient to cause total depuration of the accumulated Ag. Moreover, a higher concentration of Ag was found in the intestine of fish when compared with other organs, and the elimination rate constant of AgNP in the intestine was very low. Although a potential for trophic transfer of AgNP cannot be suggested based in the data acquired in this study, there is still a potential environmental risk for aquatic species.

Artefactos tangíveis e adaptáveis no ambiente doméstico

Recentemente assistimos a uma evolução da relação do Homem com a tecnologia, em larga medida acompanhada por novos modelos de interacção que modificam a forma de conceber os artefactos e constroem novos contextos de uso. Procuramos investigar, na presente tese, uma das abordagens emergentes, o universo dos media tangíveis, articulando a perspectiva do design da tecnologia orientada para a Human-Computer Interation (HCI), com a dimensão social, cultural e estética no uso da tecnologia. Os media tangíveis, ao contrário do que sucede com os conteúdos digitais convencionais, têm espessura e expressão física e, porque são dotados de um corpo que habita o espaço das disposições físicas, estão sujeitos à acção do mundo cultural e das práticas sociais que regem os demais objectos físicos que podemos encontrar no nosso quotidiano. Esta nova relação com a tecnologia digital obrigará as disciplinas que se encontram mais próximas do desenvolvimento tecnológico, tais como o Design de Interacção e a HCI, a abrirem-se aos contributos e abordagens das ciências humanas. Admitindo que a natureza subjacente ao processo da adaptabilidade no ambiente doméstico altera o equilíbrio da relação entre o design e o uso da tecnologia, julgamos ser essencial o desenvolvimento de uma fenomenologia da interação. Por outro lado, a adaptabilidade dos media tangíveis apresenta um conjunto de dificuldades, não apenas de ordem técnica, mas também de natureza conceptual, que têm dificultado o desenvolvimento e a implementação no terreno de tecnologias personalizáveis. Um dos objectivos da presente tese consiste em investigar um quadro conceptual capaz de enquadrar o fenómeno da adaptabilidade dos media tangíveis, e desenvolver uma tecnologia que possa servir de objecto a um estudo empírico com base numa abordagem etnográfica.

Cooperative positioning for heterogeneous wireless systems

Future emerging market trends head towards positioning based services placing a new perspective on the way we obtain and exploit positioning information. On one hand, innovations in information technology and wireless communication systems enabled the development of numerous location based applications such as vehicle navigation and tracking, sensor networks applications, home automation, asset management, security and context aware location services. On the other hand, wireless networks themselves may bene t from localization information to improve the performances of di erent network layers. Location based routing, synchronization, interference cancellation are prime examples of applications where location information can be useful. Typical positioning solutions rely on measurements and exploitation of distance dependent signal metrics, such as the received signal strength, time of arrival or angle of arrival. They are cheaper and easier to implement than the dedicated positioning systems based on ngerprinting, but at the cost of accuracy. Therefore intelligent localization algorithms and signal processing techniques have to be applied to mitigate the lack of accuracy in distance estimates. Cooperation between nodes is used in cases where conventional positioning techniques do not perform well due to lack of existing infrastructure, or obstructed indoor environment. The objective is to concentrate on hybrid architecture where some nodes have points of attachment to an infrastructure, and simultaneously are interconnected via short-range ad hoc links. The availability of more capable handsets enables more innovative scenarios that take advantage of multiple radio access networks as well as peer-to-peer links for positioning. Link selection is used to optimize the tradeo between the power consumption of participating nodes and the quality of target localization. The Geometric Dilution of Precision and the Cramer-Rao Lower Bound can be used as criteria for choosing the appropriate set of anchor nodes and corresponding measurements before attempting location estimation itself. This work analyzes the existing solutions for node selection in order to improve localization performance, and proposes a novel method based on utility functions. The proposed method is then extended to mobile and heterogeneous environments. Simulations have been carried out, as well as evaluation with real measurement data. In addition, some speci c cases have been considered, such as localization in ill-conditioned scenarios and the use of negative information. The proposed approaches have shown to enhance estimation accuracy, whilst signi cantly reducing complexity, power consumption and signalling overhead.

Novos materiais com polioxotungstatos substituídos com metais d e f

The present work reports studies on the new compounds obtained by the combination of polyoxoanions derived from the Keggin and Lindquist structures with several cations. The studies were first focused on the monolacunary Keggin polyoxoanions [PW11O39M(H2O)]n- (M = FeIII, MnIII and n = 4; M = CoII and n = 5) and its combination with the organic cation 1-butyl-3-methylimidazolium (Bmim+). The association of Bmim+ cation with the polyoxoanion [PW11O39Fe(H2O)]4- allowed to isolate for the first time both the monomeric and the dimeric [PW11O39Fe)2O]10- anions, with the same cation and using simple bench techniques by pH manipulation. Studies regarding the stability of these inorganic species in solution indicated that both species are present in solution in equilibrium. However, the inability to up until now isolate the dimeric unit through simple bench methods, lead to the hypothesis that the cation had a role to play in the selective precipitation of either the monomer or the dimer. Repetition of the same procedures with the polyoxoanions [SiW11O39Fe(H2O)]5- and [PW11O39M(H2O)]n- (M = FeIII, MnIII and n = 4; M = Co and n = 5), afforded only the corresponding monomeric compounds, (Bmim)5[SiW11O39FeIII(H2O)]· 4H2O (3), (Bmim)5[PW11O39CoII(H2O)]· 0.5 H2O, (4) and (Bmim)5[PW11O39MnIII(H2O)]· 0.5 H2O (5). Moreover, the combination of Bmim+ and the polyoxotungstate [PW11O39Co(H2O)]5- afforded two different crystal structures, depending on the synthetic conditions. Thus, a ratio Bmim+:POM of 5:1 and the presence of K+ cations (due to addition of KOH) led to a formula Na2K(Bmim)2[PW11.2O39Co0.8(H2O)]·7H2O (4a), whilst a ratio Bmim:POM of 7:1 led to the formation of a crystal with the chemical formula Na2(Bmim)8[PW11O39Co(H2O)]2·3H2O (4b). Electrochemical studies were performed with carbon paste electrodes modified with BmimCl to investigate the influence of the Bmim+ cation in the performance of the electrodes. The voltametric measurements obtained from solutions containing the anions [PW11O39]7- and [SiW11O39]8- are presented. Results pointed to an improvement of the acquired voltametric signal with a slight addition of BmimCl (up to 2.5% w/w), specially in the studies regarding pH variation. Additional synthesis were carried out with both the cations Omim+ and THTP+.

Brazilian savanna forest : conservation, medicinal reservoir and bioprospecting

This study aimed to analyse the Brazilian savanna forest from a Legal Reserve (LR) area from a perspective of conservation, reservoir of organic carbon and medicinal biomass for a prospective use of native medicinal plants. An ethnobotanical and ethnopharmacological survey was carried out close to a community settled in the rural area in the south of Tocantins, being selected 9 of the most cited species (cajuí- Anacardium othonianum; inharé-Brosimum gaudichaudii; jatobá-Hymenaeae courbaril; jenipapo-Genipa americana, aroeira-Myracrodruon urundeuva; negramina-Siparuna guianensis; barbatimão- Stryphnodendron obovatum; assa peixe-Vernonia brasiliana, embaúba-Cecropia pachystachya). Crude foliar extracts were subjected to a preliminary phytochemical prospection and triage of secondary metabolites with antimicrobial activity of potential interest in health and familiar agriculture. Phenolic compounds, terpenes and flavonoids were detected in the extracts of most species, which suggests the presence of antimicrobial, antioxidant and anti-insect activities. It was evident the need to better know the LR as a reservoir of medicinal biomass in an area under ecological tension where 35% (610ha) of the property is LR and should be protected by law. Therefore, a forest inventory of live woody species was performed using the allometric or indirect method. This identified a rare remnant of Semidecidual Seasonal Forest amidst the largest world savannah, the Cerrado biome. An analysis of the forest average productivity per basal area (m².ha), aerial live biomass (ton.ha-1) and carbon stock was carried out. The forest fragment was considered relatively rich in species and diversity, although showing signs of disturbance and dominance by a few species. Its horizontal structure suggests biotic regeneration conditions. It is an important reservoir of medicinal plants. Of the families (57.5%) presenting medicinal species, 19 from a total of 33 are represented in the area and contain 44% (27) of the total species (61) and 63% (432) of the total individuals catalogued. Medicinal species have ecological importance for the equilibrium of the local flora and represent 80% of the 10 species with higher Importance Value Index (IVI): Tetragastris altissima, Chrysophyllum marginatum, Oenocarpus distichus, Sclerolobium paniculatum, Simarouba versicolor, Alibertia macrophylla, Siparuna guianensis, Maprounea guianensis, Licania parvifolia e Physocalymma scaberrimum. Medicinal productivity was high for this type of phytophysionomy: 183,2 ton. ha-1 of biomass and 91,51 ton. ha-1 of carbon representing 66% of the total biomass and carbon of this Cerrado forest. From this stage S. guianensis (Siparunaceae) was selected for performing bioassays in order to verify its biological activity against microorganisms of health and agricultural relevance. This is a native aromatic medicinal plant recommended as priority for conservation, with local popular medicinal validation and availability of medicinal feedstock (3300 Kg.ha-1), with the foliar fraction giving 38Kg/ha of crude extract and 5L/ha of essential oil. Foliar crude extracts and essential oil were obtained and tested in vitro using a disk diffusion bioassay. Different concentrations of these natural products were tested against gram-positive bacteria (Staphylococcus aureus ATCC 29213), gram-negative bacteria (Escherichia coli ATCC 25922 and ATCC 35218; Pseudomonas aeruginosa ATCC 10145) and fungi (Candida albicans ATCC 6258 e Fusarium oxysporum). The essential oil inhibited the growth of S. aureus in its crude concentration (380μg.mL-1), as well as diluted to half (190μg.mL-1) and a quarter strength (95μg.mL-1). It’s likely that such action is due to sesquiterpenes major components, such as bisabolol and bisabolene (10.35%), measured by gas chromatography (GC-MS, GC-FID). Extracts did not exhibit any antimicrobial activity against the microorganisms tested. The native medicinal plants prospective market is an alternative that favours the conservation of biodiversity while generating benefits for the development of sustainable family productive activities within local ecosystems instead of the current inappropriate uses. This strengthens conservation policies of Legal Reserve in rural settlements and is in agreement with public policy on global warming and climate changes.

Mercaptans extraction from jet-fuel streams using ionic liquids

Desulfurization is one of the most important processes in the refining industry. Due to a growing concern about the risks to human health and environment, associated with the emissions of sulfur compounds, legislation has become more stringent, requiring a drastic reduction in the sulfur content of fuel to levels close to zero (< 10 ppm S). However, conventional desulfurization processes are inefficient and have high operating costs. This scenario stimulates the improvement of existing processes and the development of new and more efficient technologies. Aiming at overcoming these shortcomings, this work investigates an alternative desulfurization process using ionic liquids for the removal of mercaptans from "jet fuel" streams. The screening and selection of the most suitable ionic liquid were performed based on experimental and COSMO-RS predicted liquid-liquid equilibrium data. A model feed of 1-hexanethiol and n-dodecane was selected to represent a jet-fuel stream. High selectivities were determined, as a result of the low mutual solubility between the ionic liquid and the hydrocarbon matrix, proving the potential use of the ionic liquid, which prevents the loss of fuel for the solvent. The distribution ratios of mercaptans towards the ionic liquids were not as favorable, making the traditional liquid-liquid extraction processes not suitable for the removal of aliphatic S-compounds due to the high volume of extractant required. This work explores alternative methods and proposes the use of ionic liquids in a separation process assisted by membranes. In the process proposed the ionic liquid is used as extracting solvent of the sulfur species, in a hollow fiber membrane contactor, without co-extracting the other jet-fuel compound. In a second contactor, the ionic liquid is regenerated applying a sweep gas stripping, which allows for its reuse in a closed loop between the two membrane contactors. This integrated extraction/regeneration process of desulfurization produced a jet-fuel model with sulfur content lower than 2 ppm of S, as envisaged by legislation for the use of ultra-low sulfur jet-fuel. This result confirms the high potential for development of ultra-deep desulfurization application.

Treatment of aqueous effluents contaminated with ionic liquids

Ionic liquids are a class of solvents that, due to their unique properties, have been proposed in the past few years as alternatives to some hazardous volatile organic compounds. They are already used by industry, where it was possible to improve different processes by the incorporation of this kind of non-volatile and often liquid solvents. However, even if ionic liquids cannot contribute to air pollution, due to their negligible vapour pressures, they can be dispersed thorough aquatic streams thus contaminating the environment. Therefore, the main goals of this work are to study the mutual solubilities between water and different ionic liquids in order to infer on their environmental impact, and to propose effective methods to remove and, whenever possible, recover ionic liquids from aqueous media. The liquid-liquid phase behaviour of different ionic liquids and water was evaluated in the temperature range between (288.15 and 318.15) K. For higher melting temperature ionic liquids a narrower temperature range was studied. The gathered data allowed a deep understanding on the structural effects of the ionic liquid, namely the cation core, isomerism, symmetry, cation alkyl chain length and the anion nature through their mutual solubilities (saturation values) with water. The experimental data were also supported by the COnductor-like Screening MOdel for Real Solvents (COSMO-RS), and for some more specific systems, molecular dynamics simulations were also employed for a better comprehension of these systems at a molecular level. On the other hand, in order to remove and recover ionic liquids from aqueous solutions, two different methods were studied: one based on aqueous biphasic systems, that allowed an almost complete recovery of hydrophilic ionic liquids (those completely miscible with water at temperatures close to room temperature) by the addition of strong salting-out agents (Al2(SO4)3 or AlK(SO4)2); and the other based on the adsorption of several ionic liquids onto commercial activated carbon. The first approach, in addition to allowing the removal of ionic liquids from aqueous solutions, also makes possible to recover the ionic liquid and to recycle the remaining solution. In the adsorption process, only the removal of the ionic liquid from aqueous solutions was attempted. Nevertheless, a broad understanding of the structural effects of the ionic liquid on the adsorption process was attained, and a final improvement on the adsorption of hydrophilic ionic liquids by the addition of an inorganic salt (Na2SO4) was also achieved. Yet, the development of a recovery process that allows the reuse of the ionic liquid is still required for the development of sustainable processes.

Análise do comportamento de polímeros na estabilização de solos em fundações

O presente projeto de investigação em Engenharia Civil é construído em torno das necessidades atuais expressas pelos setores da construção e obras públicas em fundações. Em colaboração com a empresa GEO este trabalho pretende dar resposta em tempo útil aos empreiteiros, pondo o conhecimento científico ao serviço da indústria, colmatando a escassez de investigação académica que se verifica neste domínio. Esta investigação, à qual se associou a empresa BRASFOND, recorre ao estudo de ensaios de carga estática à compressão realizados no Brasil, segundo a NBR 12131 (2005) e NBR 12131 (2006). Assim, para estudar o desempenho de polímeros aplicados na estabilização de solos em fundações, foram analisados 6 ensaios de carga realizados em obras de intervenção da empresa GEO, disponibilizados pela empresa BRASFOND. Os ensaios de carga verticais estáticos de compressão axial foram realizados em estacas de 3 obras, nomeadamente a construção de uma central termoelétrica, em 2009, e de dois edifícios, em 2010. O projeto de fundações da central termoelétrica assentou na execução de estacas com polímeros, com 1270 estacas moldadas “in loco” com 1 000 mm de diâmetro e profundidade variável de 10 m a 18 m, em solos moles e pouco compactos de 8 m a 9 m de espessura, encastradas até 3 m sobre um maciço Gnaisse medianamente alterado (W3). Dos ensaios de carga realizados nesta obra, foram alvo deste estudo a análise dos primeiros 4 disponibilizados pela empresa. Os valores estimados por métodos semi-empíricos da capacidade resistente das estacas, considerando a recuperação da rocha nos trechos encastrados, foram comparados com a carga resistente última à compressão obtida através do ensaio de carga. O projeto de fundações de dois edifícios de elevado número de andares (cerca de 30) no litoral do Estado de São Paulo, em Santos, assentou na execução de fundações indiretas em solos moles a muito moles, com estacas de grandes dimensões moldadas com recurso a polímeros. Para atestar a qualidade das estacas, de forma a avaliar o comportamento carga versus assentamento e estimar as características da capacidade de carga, procedeu-se à execução de dois ensaios de carga estática à compressão, um dos quais instrumentado em profundidade. Os valores estimados por métodos semi-empíricos da capacidade resistente das estacas foram comparados com a carga resistente última à compressão obtida através do ensaio de carga. Para além deste estudo se revestir de interesse académico e empresarial, o contexto inerente à aplicação de polímeros em fundações é relevante para a prática pedagógica. Assim, este projeto envolve também uma componente educacional, esta última implementada numa escola do ensino básico e secundário da região centro do país.

Severe plastic deformation of Al–Zn alloys

In this work, the R&D work mainly focused on the mechanical and microstructural analysis of severe plastic deformation (SPD) of Al–Zn alloys and the development of microstructure–based models to explain the observed behaviors is presented. Evolution of the microstructure and mechanical properties of Al–30wt% Zn alloy after the SPD by the high–pressure torsion (HPT) has been investigated in detail regarding the increasing amount of deformation. SPD leads to the gradual grain refinement and decomposition of the Al–based supersaturated solid solution. The initial microstructure of the Al–30wt% Zn alloy contains Al and Zn phases with grains sizes respectively of 15 and 1 micron. The SPD in compression leads to a gradual decrease of the Al and Zn phase grain sizes down to 4 microns and 252 nm, respectively, until a plastic strain of 0.25 is reached. At the same time, the average size of the Zn particles in the bulk of the Al grains increases from 20 to 60 nm and that of the Zn precipitates near or at the grain boundaries increases as well. This microstructure transformation is accompanied at the macroscopic scale by a marked softening of the alloy. The SPD produced by HPT is conducted up to a shear strain of 314. The final Al and Zn grains refine down to the nanoscale with sizes of 370 nm and 170 nm, respectively. As a result of HPT, the Zn–rich (Al) supersaturated solid solution decomposes completely and reaches the equilibrium state corresponding to room temperature and its leads to the material softening. A new microstructure–based model is proposed to describe the softening process occurring during the compression of the supersaturated Al–30wt% Zn alloy. The model successfully describes the above–mentioned phenomena based on a new evolution law expressing the dislocation mean free path as a function of the plastic strain. The softening of the material behavior during HPT process is captured very well by the proposed model that takes into consideration the effects of solid solution hardening and its decomposition, Orowan looping and dislocation density evolution. In particular, it is demonstrated that the softening process that occurs during HPT can be attributed mainly to the decomposition of the supersaturated solid solution and, in a lesser extent, to the evolution of the dislocation mean free path with plastic strain.

Curso colectivo: Multiculturalismo

Coordinan: Dr. Raúl Alcalá, Dra. Mónica Gómez, Dr. León Olivé