Process development on the monolithic fabrication of an ultra-compact 4×4 optical switch matrix on InP/InGaAsP material

We have fabricated an ultra-compact 4×4 optical matrix on InP/InGaAsP material. 1×4 MMI couplers and TIR mirrors are employed to produce a compact 1×2 mm2 device. A CH4/H2/O2 RIE dry etch process has been used to realize two-level dry etching: deep-etch for both the MMI couplers and the mirrors and shallow-etch for the rest of the routing waveguides. It was found that a metal/dielectric bilayer mask is essential for multi-dry-etch processes and high profile verticality. We have found a Ti intermediate mask for the deep-etch process which is removable by SF6 dry-etch before the following shallow process. Dry-etch removal of the intermediate mask is necessary to protect the deep-etched mirror sidewall.

Characterization of defect removal in hydrogenated and deuterated amorphous silicon thin film transistors

Thin film transistors (TFTs) utilizing an hydrogenated amorphous silicon (a-Si:H) channel layer exhibit a shift in the threshold voltage with time under the application of a gate bias voltage due to the creation of metastable defects. These defects are removed by annealing the device with zero gate bias applied. The defect removal process can be characterized by a thermalization energy which is, in turn, dependent upon an attempt-to-escape frequency for defect removal. The threshold voltage of both hydrogenated and deuterated amorphous silicon (a-Si:D) TFTs has been measured as a function of annealing time and temperature. Using a molecular dynamics simulation of hydrogen and deuterium in a silicon network in the H2 * configuration, it is shown that the experimental results are consistent with an attempt-to-escape frequency of (4.4 ± 0.3) × 1013 Hz and (5.7 ± 0.3) × 1013 Hz for a-Si:H and a-Si:D respectively which is attributed to the oscillation of the Si-H and Si-D bonds. Using this approach, it becomes possible to describe defect removal in hydrogenated and deuterated material by the thermalization energies of (1.552 ± 0.003) eV and (1.559 ± 0.003) eV respectively. This correlates with the energy per atom of the Si-H and Si-D bonds. © 2006 Elsevier B.V. All rights reserved.

A survey of process hygiene in the Sri Lankan prawn industry. 1. Hygiene status of raw materials and products

A survey of processing hygiene in the Sri Lankan prawn industry has shown that the incoming raw material has extremely high bacterial loadings; about 50% of samples analysed had a total count in excess of 10,000,000/g. Although beheading reduces the count, ineffective temperature control during processing means that the final total count of raw, shell-on, P.U.D. and P.A.D. prawns, as well as cooked prawns, is in excess of 1,000,000/g. - the maximum level specified by many importing countries.

A survey of process hygiene in the Sri Lankan prawn industry. 2. The hygiene status of personnel

Of 262 personnel tested, 137 (52%) were found to be positive for Staphylococcus aureus. Among individual companies the prevalence of S. aureus ranged from 92% (Company No. 1) to 22% (Company No. 2). Although five companies provided a sanitiser hand-dip, this was found to be ineffective for the control of S. aureus. Provision of hand-washing facilities, of protective clothing and of toilet facilities was found to be inadequate for an export food industry.

A survey of process hygiene in the Sri Lankan prawn industry. 3. Critical control points

Of fifteen processing plants surveyed in Sri Lanka, only five were found to have a prawn process which was adequately controlled. Most common process faults were: inadequate chilling of prawns after a wash in 30°C, mains water, the use of large blocks of ice to cool prawns, and high ratios of prawns to ice. There was also ample scope for cross-contamination of the processed prawns.

Shifting rice farming to fish culture in some selected areas of Mymensingh, Bangladesh: the process, conflicts and impacts

The evolutionary process of converting low-lying paddy fields into fish farms and its impact on agrarian communities in some selected areas of Mymensingh district were studied. This study was conducted through participatory rural appraisal (PRA) covering 12 villages from each of selected upazillas viz. Fulpur and Haluaghat of Mymensing [sic] district. A total of 12 PRA sessions were conducted where 90 farmers participated during 29 July to 26 August 2004. It is seen that the use of low-lying paddy fields was mostly confined to Broadcast Aman (B. Aman) rice production until 1960s. With the introduction of modern rice farming technology, the farmers started to produce Boro rice in Rabi season and B. Aman rice in Kharif season. With the passage of time, aquaculture technologies have been evolved and the farmers realized that fish farming is more profitable than rice cultivation, and then they started to utilize their paddy fields for alternate rice-fish farming and rice-cum-fish farming. Now a days, aquaculture based crop production system is in practice in more than 25% of the low-lying paddy fields. Conversion of rice fields in to fish ponds has brought up a change in the livelihood patterns of the rural farmers. The areas where the farmers involved themselves in the new production systems were fingerling collection, transportation and marketing of fry and fingerlings. During 1960s to 1970s, a few people used to culture fish in the permanent ponds for their own consumption, the species produced were rohu, catla, mrigal, ghainna, long whiskered catfish, freshwater shark (boal), snake head (shol) etc. Small fishes like climbing perch, stinging catfish, walking catfish, barb, minnows etc. were available in the rice fields during monsoon season. In 1980s to mid 1990s, some rice fields were converted into fish ponds and the people started to produce fish for commercial purposes. When rice-fish farming became profitable, a large number of people started converting their rice fields in to rice-fish culture ponds. Culture of some exotic fishes like silver carp, tilapia, grass carp, silver barb etc. also started in the paddy fields. Higher income from fish farming contributed positively in improving the housing, sanitation and education system in the study areas. It is seen that the medium and medium high lands were only used for alternate rice fish farming. The net income was high in any fish based cropping system that motivated the farmers to introduce fish based cropping system in the low-lying inland areas. As a result, the regional as well as communal income disparities occurred. However, the extraction of ground water became common during the dry period as the water was used for both rice and fish farming. Mass conversion of paddy fields into rice-fish culture ponds caused water logging in the study areas. In most cases, the participated farmers mentioned that they could be easily benefited by producing fish with T. Aman or only fish during the monsoon season. They agreed that this was an impressive technology to them and they could generate employment opportunities throughout the year. Finally, the social, economic and technical problems which are acting as constraints to rapid expansion of fish production system were reported from the interviewee.

Utilization of prawn waste: isolation of chitin and its conversion to chitosan

process is described for the preparation of chitosan from prawn waste. The process involves extraction of protein using 0.5% sodium hydroxide solution, bleaching the protein free mass with bleach liquor containing 0.3-0.5% available chlorine followed by demineralisation with 1.25 N hydrochloric acid in the cold and deacetylation using 1:1 (w/w) sodium hydroxide solution at 100°C for 2 hours.

Studies on cannning of mackerel fillets in oil

Canning operations suitable for packing mackerel (Rastrelliger kanagurta) in the form of skinless and boneless fillets in oil were studied and the process standardised. The technique of lye peeling for skin removal could be successfully applied. The storage life of the final product was tested over a period of one year and found to be quite comparable to other similar fish products.

Utilization of the fish waste self-brine of fish curing industry as farm fertilizer

Large quantities of self-brine accumulating in curing tanks during the process of commercial fish salting is mostly wasted at present. This liquor exuded from the fish during the process of salting contains considerable amounts of soluble proteins and minerals. Due to the presence of organic matter the self-brine quickly putrefies causing nauseating smell. This renders the whole surroundings insanitary and often leads to health hazards to neighboring localities. Any economic method of utilising this waste brine and converting it into some useful product will be a tangible help to the fish curing industry. Hence, a method is given for converting this waste self-brine into a cheap and efficient fertilizer.

Removal of fungus and prevention of fungal reinfestation in stored dry salted fish

A simple and effective method is described for converting dry fish products infested with fungus and red halophilic bacteria to acceptable ones. Washing, drying and then smearing with a mixture of 3% sodium propionate in dry, refined salt in a ratio of 1 part mixture: 10 parts dry fish resulted in the fish having a shelf life of 5 months.

Chitosan for removal of mercury from water

Chitosan from prawn waste was used for the removal of mercury from solutions. Mercuric chloride solutions containing 250, 500, 1000, 10000 and 100000 ng of Hg super(+2)/ml were treated with chitosan samples of different particle size for different periods. The effect of initial concentration of mercury in the solution, particle size of chitosan and time of treatment on the adsorption of Hg super(+2) was studied. The residual mercury content after treatment for ten min. with chitosan of 40 mesh size from a solution of initial concentration 10000 ng/ml was 10 ng/ml whereas it was 50 ng/ml for chitosan of larger particle size (10-20 mesh). From solutions of lower concentrations complete removal of mercury was possible by chitosan treatment. Though the particle size and time of treatment have significant effect, the concentration of mercury in solution is more influential on the removal of mercury from solution.

Development of a process for canning fresh water fish rohu (Labeo rohita)

Results of experiments conducted to work out a process for canning fresh water fish rohu (Labeo rohita) from culture sources are presented. In order to impart a proper firm texture to the meat cold blanching the skinless boneless meat in 15% brine containing 0.25% calcium chloride was found necessary. Increasing the concentration of calcium chloride beyond 0.25% resulted in impairing the quality of meat, the texture becoming more fibrous and the flavour being adversely affected. Other firming agents tried did not yield any beneficial effect. The meat so blanched yielded a good product when canned in natural style.

Investigation on reproduction process in two species of crab, Eriphia sebana and Ocypode saratan in the intertidal zone of Chabahar area

The present study with headline investigation on reproduction in two species of crab Eriphia sebana and Ocypode saratan was carried out in the intertidal zone of Chabahar in thirteen month from December 2004 to December 2005. Checked samplings have been taken, 45 number Crab monthly from any four stations by manual or use trap. During this study the following subjects were measured: temperature range and salinity, measurable coast granule, determination of sex ratio, relations carapace width with carapace length, Carapace width with total body weight, Gonad weight, gonadosomatic index, condition factor, gastrosomatic index, investigation content in stomach, LM50, growth parameters, plenty distribution length and width and gonad weight and total body weight. Studied on measurable coast granule were expressed that Ocypode saratan in Desalination station, were nest in soils equable sand and this quantity were confirmed in Pozm station. Sex ratio were assign in desalination area and Pozm M: F 0/44:0/56 and in Tiss and Chabahar M:F 0/45:0/55. Carapace length and carapace width (cm) and body weight (g) Furthest were designated in Ocypode saratan within carapace width sequential: In female: 5/42-6/15-105/13 and in male: 5/53-6/25-108/91 and in Eriphia sebana within Tiss area sequential: in female: 5/12-5/94-110/21 and in male 5/14-60/01-114/37. Have been linear relationship between carapace length and carapace width and equaled CW=aCL+b. Weight growth in two species were be modal and equaled BW=aCLb And increased crab weight by built up carapace width. Maximum gonad weight in Ocypode saratan within Desalination area in female have been outcome 3/39 and in male 0/84g and in Eriphia sebana extreme within Tiss during may in female were be 4/18 and in male 1/1g. Stomach content in Eriphia sebana were involved a black until half-purplish liquid and yellowish in Ocypode saratan. Stomach contents identifiable were being in four groups: Molluscoid, Crustacean, Plankton and Fish. Carapace width during the first year of maturation have been LM50:3/77 in Desalination area and LM50:3/92 in Pozm for Ocypode saratan and LM50:4/26 in Tiss and LM50:4/62 in Chabahar. Ability spawning in Eriphia sebana within Tiss has been CW=4/17cm and in Ocypode saratan within Desalination area CW=4/23cm. Maximun value of Loo for Eriphia sebana was equal 59/67 and growth factor K=0/68 within Tiss and Loo =61/64, K=0/65 for Ocypode saratan within Desalination area. Maximun GSI and GI have been within Desalination area and Tiss and minimum within Pozm and Chabahar. The maturity stages of two species were classifed into six stages. Review on GSI, CF have been showed that relation with temperature and salinity and definer in two species have been spawned in two period that Maximun in spring premier than autumn.

A continuing PROCESS: for grassroots development

PROCESS (Participatory Research, Organization of Communities, and Education Towards Struggle for Self-reliance) is the offshoot of an experiment encouraged by the International Labor Organization to stimulate self-help initiatives among rural communities in Antique and Batangas. Its operations today extend to 10 provinces in the Philippines, touching the lives of thousands of farmers, fisherfolk, women and other marginalized sectors.