Filter Paper Method for the Determination of the Soil Water Retention Curve

ABSTRACT High cost and long time required to determine a retention curve by the conventional methods of the Richards Chamber and Haines Funnel limit its use; therefore, alternative methods to facilitate this routine are needed. The filter paper method to determine the soil water retention curve was evaluated and compared to the conventional method. Undisturbed samples were collected from five different soils. Using a Haines Funnel and Richards Chamber, moisture content was obtained for tensions of 2; 4; 6; 8; 10; 33; 100; 300; 700; and 1,500 kPa. In the filter paper test, the soil matric potential was obtained from the filter-paper calibration equation, and the moisture subsequently determined based on the gravimetric difference. The van Genuchten model was fitted to the observed data of soil matric potential versus moisture. Moisture values of the conventional and the filter paper methods, estimated by the van Genuchten model, were compared. The filter paper method, with R2 of 0.99, can be used to determine water retention curves of agricultural soils as an alternative to the conventional method.

Prospective determination of imipenem concentration of the plasma of critically-ill children

ABSTRACT Imipenem plasma-concentrations were measured in 19 critically-ill children (median 0.8 year, range 0.02-12.9 years). Wide inter-individual variations (2-4x at peak and >10x at through concentrations) resulted in unpredictable plasma-levels in several children. To avoid subtherapeutic drug levels we recommend at least 100 mg/kg/day of imipenem-cilastatin in critically-ill children requiring such therapy.

Distribution of the transposable elements bilbo and gypsy in original and colonizing populations of Drosophila subobscura

Background: Transposable elements (TEs) constitute a substantial amount of all eukaryotic genomes. They induce an important proportion of deleterious mutations by insertion into genes or gene regulatory regions. However, their mutational capabilities are not always adverse but can contribute to the genetic diversity and evolution of organisms. Knowledge of their distribution and activity in the genomes of populations under different environmental and demographic regimes, is important to understand their role in species evolution. In this work we study the chromosomaldistribution of two TEs, gypsy and bilbo, in original and colonizing populations of Drosophilasubobscura to reveal the putative effect of colonization on their insertion profile.Results: Chromosomal frequency distribution of two TEs in one original and three colonizingpopulations of D. subobscura, is different. Whereas the original population shows a low insertionfrequency in most TE sites, colonizing populations have a mixture of high (frequency ¿ 10%) andlow insertion sites for both TEs. Most highly occupied sites are coincident among colonizingpopulations and some of them are correlated to chromosomal arrangements. Comparisons of TEcopy number between the X chromosome and autosomes show that gypsy occupancy seems to becontrolled by negative selection, but bilbo one does not. Conclusion: These results are in accordance that TEs in Drosophila subobscura colonizing populations are submitted to a founder effect followed by genetic drift as a consequence of colonization. This would explain the high insertion frequencies of bilbo and gypsy in coincident sites of colonizing populations. High occupancy sites would represent insertion events prior to colonization. Sites of low frequency would be insertions that occurred after colonization and/orcopies from the original population whose frequency is decreasing in colonizing populations. Thiswork is a pioneer attempt to explain the chromosomal distribution of TEs in a colonizing specieswith high inversion polymorphism to reveal the putative effect of arrangements in TE insertionprofiles. In general no associations between arrangements and TE have been found, except in a fewcases where the association is very strong. Alternatively, founder drift effects, seem to play aleading role in TE genome distribution in colonizing populations.

Temporal and spatial dynamics of benthic invertebrate communities in an alpine glacier-fed alluvial system

Summary The present thesis work focused on the ecology of benthic invertebrates in the proglacial floodplain of the Rhone in the Swiss Alps. The main glacial Rhone River and a smaller glacial tributary, the Mutt River, joined and entered a braiding multi-thread area. A first part concentrated on the disruption of the longitudinal patterns of environmental conditions and benthic invertebrate fauna in the Rhone by its tributary the Mutt. The Mutt had less harsh environmental conditions, higher taxonomic richness and more abundant zoobenthos compared to the Rhone upstream of the confluence. Although the habitat conditions in the main stream were little modified by the tributary, the fauna was richer and more diverse below the confluence. Colonisation from the Mutt induced the occurrence of faunal elements uncommon of glacial streams in the upper Rhone, where water temperature remains below 4°C. Although the glacial Rhone dominated the system with regard to hydrology and certain environmental conditions, the Mutt tributary has to be seen as the faunal driver of the system. The second part of the study concerned the spatio-temporal differentiation of the habitats and the benthic communities along and across the flood plain. No longitudinal differentiation was found. The spatial transversal differentiation of three habitat types with different environmental characteristics was successfully reflected in the spatial variability of benthic assemblages. This typology separated marginal sites of the flood plain, left bank sites under the influence of the Mutt, and the right bank sites under the influence of the Rh6ne. Faunistic spatial differences were emphasized by the quantitative structure of the fauna, richness, abundances and Simpson index of diversity. Seasonal environmental variability was positively related with Simpson index of diversity and the total richness per site. Low flow conditions were the most favourable season for the fauna and November was characterized by low spatial environmental heterogeneity, high spatial heterogeneity of faunal assemblage, maximum taxonomic richness, a particular taxonomic composition, highest abundances, as well as the highest primary food resources. The third part studied the egg development of three species of Ephemeroptera in the laboratory at 1.5 to 7°C and the ecological implications in the field. Species revealed very contrasting development strategies. Baetis alpinus has a synchronous and efficient egg development, which is faster in warmer habitats, enabling it to exploit short periods of favourable conditions in the floodplain. Ecdyonurus picteti has a very long development time slightly decreasing in warmer conditions. The high degree of individual variation suggests a genetic determination of the degree-days demand. Combined with the glacial local conditions, this strategy leads to an extreme delay of hatching and allows it to develop in very unpredictable habitats. Rhithrogena nivata is the second cold adapted species in Ephemeroptera. The incubation duration is long and success largely depends on the timing of hatching and the discharge conditions. This species is able to exploit extremely unstable and cold habitats where other species are limited by low water temperatures. The fourth part dealt with larval development in different habitats of the floodplain. Addition of data on egg development allowed the description of the life histories of the species from oviposition until emergence. Rhithrogena nivata and loyolaea generally have a two-year development, with the first winter passed as eggs and the second one as larvae. Development of Ecdyonurus picteti is difficult to document but appears to be efficient in a harsh and unpredictable environment. Baetis alpinus was studied separately in four habitats of the floodplain system with contrasting thermal regimes. Differences in success and duration of larval development and in growth rates are emphasised. Subvention mechanisms between habitats by migration of young or grown larvae were demonstrated. Development success and persistence of the populations in the system were thus increased. Emergence was synchronised to the detriment of the optimisation of the adult's size and fecundity. These very different development strategies induce a spatial and temporal distribution in the use of food resources and ecological niches. The last part of this work aimed at the synthesis of the characteristics and the ecological features of three distinct compartments of the system that are the upper Rhone, the Mutt and the floodplain. Their particular role as well as their inter-dependence concerning the structure and the dynamics of the benthic communities was emphasised. Résumé Ce travail de thèse est consacré à l'écologie des invertébrés benthiques dans la zone alluviale proglaciaire du Rhône dans les Alpes suisses. Le Rhône, torrent glaciaire principal, reçoit les eaux de la Mutt, affluent glaciaire secondaire, puis pénètre dans une zone de tressage formée de plusieurs bras. La première partie de l'étude se concentre sur la disruption par la Mutt des processus longitudinaux, tant environnementaux que faunistiques, existants dans le Rhône. Les conditions environnementales régnant dans la Mutt sont moins rudes, la richesse taxonomique plus élevée et le zoobenthos plus abondant que dans le Rhône en amont de la confluence. Bien que les conditions environnementales dans le torrent principal soient peu modifiées par l'affluent, la faune s'avère être plus riche et plus diversifiée en aval de la confluence. La colonisation depuis la Mutt permet l'occurrence de taxons inhabituels dans le Rhône en amont de la confluence, où la température de l'eau se maintient en dessous de 4°C. Bien que le Rhône, torrent glaciaire principal, domine le système du point de vu de l'hydrologie et de certains paramètres environnementaux, l'affluent Mutt doit être considéré comme l'élément structurant la faune dans le système. La deuxième partie concerne la différentiation spatiale et temporelle des habitats et des communautés benthiques à travers la plaine alluviale. Aucune différentiation longitudinale n'a été mise en évidence. La différentiation transversale de trois types d'habitats sur la base des caractéristiques environnementales a été confirmée par la variabilité spatiale de la faune. Cette typologie sépare les sites marginaux de la plaine alluviale, ceux sous l'influence de la Mutt (en rive gauche) et ceux sous l'influence du Rhône amont (en rive droite). Les différences spatiales de la faune sont mises en évidence par la structure quantitative de la faune, la richesse, les abondances et l'indice de diversité de Simpson. La variabilité saisonnière du milieu est positivement liée avec l'indice de diversité de Simpson et la richesse totale par site. L'étiage correspond à la période la plus favorable pour la faune et novembre réunit des conditions de faible hétérogénéité spatiale du milieu, de forte hétérogénéité spatiale de la faune, une richesse taxonomique maximale, une composition faunistique particulière, les abondances ainsi que les ressources primaires les plus élevées. La troisième partie est consacrée à l'étude du développement des oeufs de trois espèces d'Ephémères au laboratoire à des températures de 1.5 à 7°C, ainsi qu'aux implications écologiques sur le terrain. Ces espèces présentent des stratégies de développement très contrastées. Baetis alpinus a un développement synchrone et efficace, plus rapide en milieu plus chaud et lui permettant d'exploiter les courtes périodes de conditions favorables. Ecdyonurus picteti présente une durée de développement très longue, diminuant légèrement dans des conditions plus chaudes. L'importante variation interindividuelle suggère un déterminisme génétique de la durée de développement. Cette stratégie, associée aux conditions locales, conduit à un décalage extrême des éclosions et permet à l'espèce de se développer dans des habitats imprévisibles. Rhithrogena nivata est la seconde espèce d'Ephémères présentant une adaptation au froid. L'incubation des oeufs est longue et son succès dépend de la période des éclosions et des conditions hydrologiques. Cette espèce est capable d'exploiter des habitats extrêmement instables et froids, où la température est facteur limitant pour d'autres espèces. La quatrième partie traite du développement larvaire dans différents habitats de la plaine alluviale. Le développement complet est décrit pour les espèces étudiées de la ponte jusqu'à l'émergence. Rhithrogena nivata et loyolaea atteignent généralement le stade adulte en deux ans, le premier hiver étant passé sous forme d'oeuf et le second sous forme de larve. Le développement de Ecdyonurus picteti est difficile à documenter, mais s'avère cependant efficace dans un environnement rude et imprévisible. Baetis alpinus a été étudié séparément dans quatre habitats de la plaine ayant des régimes thermiques contrastés. La réussite et la durée du développement embryonnaire ainsi que les taux de croissance y sont variables. Des mécanismes de subvention entre habitats sont possibles par la migration de larves juvéniles ou plus développées, augmentant ainsi la réussite du développement et le maintien des populations dans le système. L'émergence devient synchrone, au détriment de l'optimisation de la taille et de la fécondité des adultes. Ces stratégies très différentes induisent une distribution spatiale et temporelle dans l'usage des ressources et des niches écologiques. La dernière partie synthétise les caractéristiques écologiques des trois compartiments du système que sont le Rhône amont, la Mutt et la zone alluviale. Leurs rôles particuliers et leurs interdépendances du point de vue de la structure et de la dynamique des communautés benthiques sont mis en avant.

Simultaneous determination of Pu and Am radioisotopes in environmental samples: a tool for determining origin and release date

A radiochemical procedure was developed for the sequential determination of Pu and Am radioisotopes in environmental samples. The radioisotope activities were then used to assess the origin and release date of the environmental plutonium. The radioanalytical procedure is based on the separation of Pu and Am on selective extraction chromatographic resins (Eichrom TEVA and DGA). Alpha sources were prepared by electrodeposition on stainless steel discs, and the alpha emitting radionuclides (238Pu, 239,240Pu and 241Am) were measured by alpha spectrometry. For the determination of the beta emitting 241Pu, the Pu alpha source was leached in hot concentrated nitric acid and the Pu fraction further purified by extraction chromatography on a small column of TEVA resin (100 μg of resin in a pipette tip). 241Pu is then measured by ultra low level liquid scintillation counting. Due to the lack of reference material for 241Pu, the proposed radiochemical method was nevertheless validated using four IAEA reference sediments with information values of 241Pu. The proposed method was then used to determine the 238Pu, 239,240Pu, 241Pu and 241Am activity concentrations in alpine soils of France and Switzerland. The soil is the primary receptor of the atmospheric radioactive fallout and, because of the strong binding interaction with soils particles, the isotopes are little fractionated. Therefore, the activity ratios 241Pu/239+240Pu and 238Pu/239,240Pu in soil samples were used to determine the origin (source) and date of the Pu contamination in the investigated alpine sites. The 241Pu/239,240Pu and 238Pu/239,240Pu activity ratios confirmed that the main origin of Pu in the alpine soils was the global fallout from the nuclear bomb tests (NBT) in the fifties and sixties. Furthermore, the 241Pu/241Am activity ratios were used to determine the age of the Pu contamination, which is also an important data for distinguishing the Pu sources. The estimation of the date of the contamination, by the 241Pu/241Am age-dating method, further confirmed the NBT as the Pu source. However, the 241Pu/241Am dating method was limited to samples where Pu-Am fractionation was insignificant. If any, the contribution of the Chernobyl accident in the studied sites is negligible.

Determination of radionuclide levels in rainwater using ion exchange resin and gamma-spectrometry.

The evaluation of radioactivity accidentally released into the atmosphere involves determining the radioactivity levels of rainwater samples. Rainwater scavenges atmospheric airborne radioactivity in such a way that surface contamination can be deduced from rainfall rate and rainwater radioactivity content. For this purpose, rainwater is usually collected in large surface collectors and then measured by gamma-spectrometry after such treatments as evaporation or iron hydroxide precipitation. We found that collectors can be adapted to accept large surface (diameter 47mm) cartridges containing a strongly acidic resin (Dowex AG 88) which is able to quantitatively extract radioactivity from rainwater, even during heavy rainfall. The resin can then be measured by gamma-spectrometry. The detection limit is 0.1Bq per sample of resin (80g) for (137)Cs. Natural (7)Be and (210)Pb can also be measured and the activity ratio of both radionuclides is comparable with those obtained through iron hydroxide precipitation and air filter measurements. Occasionally (22)Na has also been measured above the detection limit. A comparison between the evaporation method and the resin method demonstrated that 2/3 of (7)Be can be lost during the evaporation process. The resin method is simple and highly efficient at extracting radioactivity. Because of these great advantages, we anticipate it could replace former rainwater determination methods. Moreover, it does not necessitate the transportation of large rainwater volumes to the laboratory.

Precast Concrete Elements for Accelerated Bridge Construction Final Report, Volume 1-1. Laboratory Testing of Precast Substructure Components: Boone County Bridge, January 2009

In July 2006, construction began on an accelerated bridge project in Boone County, Iowa that was composed of precast substructure elements and an innovative, precast deck panel system. The superstructure system consisted of full-depth deck panels that were prestressed in the transverse direction, and after installation on the prestressed concrete girders, post-tensioned in the longitudinal direction. Prior to construction, laboratory tests were completed on the precast abutment and pier cap elements. The substructure testing was to determine the punching shear strength of the elements. Post-tensioning testing and verification of the precast deck system was performed in the field. The forces in the tendons provided by the contractor were verified and losses due to the post-tensioning operation were measured. The stress (strain) distribution in the deck panels due to the post-tensioning was also measured and analyzed. The entire construction process for this bridge system was documented. Representatives from the Boone County Engineers Office, the prime contractor, precast fabricator, and researchers from Iowa State University provided feedback and suggestions for improving the constructability of this design.

Precast Concrete Elements for Accelerated Bridge Construction Final Report Volume 2. Laboratory Testing, Field Testing, and Evaluation of a Precast Concrete Bridge: Madison County Bridge, January 2009

The importance of rapid construction technologies has been recognized by the Federal Highway Administration (FHWA) and the Iowa DOT Office of Bridges and Structures. Recognizing this a two-lane single-span precast box girder bridge was constructed in 2007 over a stream. The bridge’s precast elements included precast cap beams and precast box girders. Precast element fabrication and bridge construction were observed, two precast box girders were tested in the laboratory, and the completed bridge was field tested in 2007 and 2008.

Precast Concrete Elements for Accelerated Bridge Construction Final Report Volume 3. Laboratory Testing, Field Testing, and Evaluation of a Precast Concrete Bridge: Black Hawk County,v January 2009

The importance of rapid construction technologies has been recognized by the Federal Highway Administration (FHWA) and the Iowa DOT Office of Bridges and Structures. Black Hawk County (BHC) has developed a precast modified beam-in-slab bridge (PMBISB) system for use with accelerated construction. A typical PMBISB is comprised of five to six precast MBISB panels and is used on low volume roads, on short spans, and is installed and fabricated by county forces. Precast abutment caps and a precast abutment backwall were also developed by BHC for use with the PMBISB. The objective of the research was to gain knowledge of the global behavior of the bridge system in the field, to quantify the strength and behavior of the individual precast components, and to develop a more time efficient panel-to-panel field connection. Precast components tested in the laboratory include two precast abutment caps, three different types of deck panel connections, and a precast abutment backwall. The abutment caps and backwall were tested for behavior and strength. The three panel-to-panel connections were tested in the lab for strength and were evaluated based on cost and constructability. Two PMBISB were tested in the field to determine stresses, lateral distribution characteristics, and overall global behavior.

The role of dynamical polarization of the ligand-to-metal charge transfer excitations in the ab initio determination of effective exchange parameters

The role of the bridging ligand on the effective Heisenberg coupling parameters is analyzed in detail. This analysis strongly suggests that the ligand-to-metal charge transfer excitations are responsible for a large part of the final value of the magnetic coupling constant. This permits us to suggest a variant of the difference dedicated configuration interaction (DDCI) method, presently one of the most accurate and reliable for the evaluation of magnetic effective interactions. This method treats the bridging ligand orbitals mediating the interaction at the same level than the magnetic orbitals and preserves the high quality of the DDCI results while being much less computationally demanding. The numerical accuracy of the new approach is illustrated on various systems with one or two magnetic electrons per magnetic center. The fact that accurate results can be obtained using a rather reduced configuration interaction space opens the possibility to study more complex systems with many magnetic centers and/or many electrons per center.

Development of a two-step screening ESI-TOF-MS method for rapid determination of significant stress-induced metabolome modifications in plant leaf extracts: the wound response in Arabidopsis thaliana as a case study.

To study the stress-induced effects caused by wounding under a new perspective, a metabolomic strategy based on HPLC-MS has been devised for the model plant Arabidopsis thaliana. To detect induced metabolites and precisely localise these compounds among the numerous constitutive metabolites, HPLC-MS analyses were performed in a two-step strategy. In a first step, rapid direct TOF-MS measurements of the crude leaf extract were performed with a ballistic gradient on a short LC-column. The HPLC-MS data were investigated by multivariate analysis as total mass spectra (TMS). Principal components analysis (PCA) and hierarchical cluster analysis (HCA) on principal coordinates were combined for data treatment. PCA and HCA demonstrated a clear clustering of plant specimens selecting the highest discriminating ions given by the complete data analysis, leading to the specific detection of discrete-induced ions (m/z values). Furthermore, pool constitution with plants of homogeneous behaviour was achieved for confirmatory analysis. In this second step, long high-resolution LC profilings on an UPLC-TOF-MS system were used on pooled samples. This allowed to precisely localise the putative biological marker induced by wounding and by specific extraction of accurate m/z values detected in the screening procedure with the TMS spectra.

Evaluation of the MIT-Scan-T2 for Non-Destructive PCC Pavement Thickness Determination Final Report, July 2008

The MIT-Scan-T2 device is marketed as a non-destructive way to determine pavement thickness on both HMA and PCC pavements. PCC pavement thickness determination is an important incentivedisincentive measurement for the Iowa DOT and contractors. The thickness incentive can be as much as 3% of the concrete contact unit price and the disincentive can be as severe as remove and replace. This study evaluated the potential of the MIT device for PCC pavement thickness quality assurance. The limited testing indicates the unit is sufficiently repeatable and accurate enough to replace core drilling as the thickness measurement method. Further study is needed to statistically establish the single user and multi-user/device precision as well as establish an appropriate sampling protocol and PWL specification.

Determination of four sequential stages during microautophagy in vitro.

Microautophagy is the transfer of cytosolic components into the lysosome by direct invagination of the lysosomal membrane and subsequent budding of vesicles into the lysosomal lumen. This process is topologically equivalent to membrane invagination during multivesicular body formation and to the budding of enveloped viruses. Vacuoles are lysosomal compartments of yeasts. Vacuolar membrane invagination can be reconstituted in vitro with purified yeast vacuoles, serving as a model system for budding of vesicles into the lumen of an organelle. Using this in vitro system, we defined different reaction states. We identified inhibitors of microautophagy in vitro and used them as tools for kinetic analysis. This allowed us to characterize four biochemically distinguishable steps of the reaction. We propose that these correspond to sequential stages of vacuole invagination and vesicle scission. Formation of vacuolar invaginations was slow and temperature-dependent, whereas the final scission of the vesicle from a preformed invagination was fast and proceeded even on ice. Our observations suggest that the formation of invaginations rather than the scission of vesicles is the rate-limiting step of the overall reaction.