Baseline responses of Alphitobius diaperinus (Coleoptera : Tenebrionidae) to cyfluthrin and detection of strong resistance in field populations in eastern Australia

Resistance to cyfluthrin in broiler farm populations of lesser mealworm, Alphitobius diaperinus (Panzer) (Coleoptera: Tenebrionidae), in eastern Australia was suspected to have contributed to recent control failures. In 2000-2001, beetles from 11 broiler farms were tested for resistance by comparing them to an insecticide-susceptible reference population by using topical application. Resistance was detected in almost all beetle populations (up to 22 times the susceptible at the LC50), especially in southeastern Queensland where more cyfluthrin applications had been made. Two from outside southeastern Queensland were found to be susceptible. Dose-mortality data generated from the reference population over a range of cyflutbrin concentrations showed that 0.0007% cyfluthrin at a LC99.9 level could be used as a convenient dose to discriminate between susceptible and resistant populations. Using this discriminating concentration, from 2001 to 2005, the susceptibilities of 18 field populations were determined. Of these, 11 did not exhibit complete mortality at the discriminating concentration (mortality range 2.8-97.7%), and in general, cyfluthrin resistance was directly related to the numbers of cyfluthrin applications. As in the full study, populations outside of southeastern Queensland were found to have lower levels of resistance or were susceptible. One population from an intensively farmed broiler area in southeastern Queensland exhibited low mortality despite having no known exposure to cyfluthrin. Comparisons of LC50 values of three broiler populations and a susceptible population, collected in 2000 and 2001 and recollected in 2004 and 2005 indicated that values from the three broiler populations had increased over this time for all populations. The continued use of cyfluthrin for control of A. diaperinus in eastern Australia is currently under consideration.

Motivation or demotivation of health workers providing maternal health services in rural areas in Vietnam: findings from a mixed-methods study

Background Motivation is an important driver for health professionals to maintain professional competencies, continue in a workforce and contribute to work tasks. While there is some research about motivation in health workers in low to middle income countries, maternal morbidity and mortality remains high in many low and middle income countries and this can be improved by improving the quality of maternal services and the training and skills maintenance of maternal health workers. This study examines the impact of motivation on maintenance of professional competence among maternal health workers in Vietnam using mixed methods. Methods The study consisted of a survey using a self-administered questionnaire of 240 health workers in 5 districts across two Vietnamese provinces and in-depth interviews with 43 health workers and health managers at the commune, district and provincial level to explore external factors that influenced motivation. The questionnaire includes a 23 item motivation instrument based on Kenyan health context, modified for Vietnamese language and culture. Results The 240 responses represented an estimated 95% of the target sample. Multivariate analysis showed that three factors contributed to the motivation of health workers: access to training (β = -0.14, p=0.03), ability to perform key tasks (β = 0.22, p=0.001), and shift schedule (β = -0.13, p=0.05). Motivation was higher in health workers self-identifying as competent or enabled to provide more care activities. Motivation was lower in those who worked more frequent night shifts and those who had received training in the last 12 months. The interviews identified that the latter was because they felt the training was irrelevant to them, and in some cases, they do not have opportunity to practice their learnt skills. The qualitative data also showed other factors relating to service context and organisational management practices contributed to motivation. Conclusions The study demonstrates the importance of understanding the motivations of health workers and the factors that contribute to this and may contribute to more effective management of the health workforce in low and middle income countries.

Ce CORE level X-ray photo electron spectroscopy of CeX2Si2 (X = Fe, Co, Ni and Cu)

Ce(3d) and (4d) core level XPS spectra of CeX = Fe, Co, Ni and Cu) suggest that the mean valence of Ce was as well as 4f hybridization strength decrease systematically from Fe to Cu. This observation is in agreement with the results of Bremstrahlung Isochromat Spectroscopy (BIS), but in disagreement with LIII-edge data reported earlier.

Nonverbal predication in Erzya : Studies on morphosyntactic variation and part of speech distinctions

This dissertation consists of four articles and an introduction. The five parts address the same topic, nonverbal predication in Erzya, from different perspectives. The work is at the same time linguistic typology and Uralic studies. The findings based on a large corpus of empirical Erzya data, which was collected using several different methods and included recordings of the spoken language, made it possible for the present study to apply, then test and finally discuss the previous theories based on cross-linguistic data. Erzya makes use of multiple predication patterns which vary from totally analytic to the morphologically very complex. Nonverbal predicate clause types are classified on the basis of propositional acts in clauses denoting class-membership, identity, property and location. The predicates of these clauses are nouns, adjectives and locational expressions, respectively. The following three predication strategies in Erzya nonverbal predication can be identified: i. the zero-copula construction, ii. the predicative suffix construction and iii. the copula construction. It has been suggested that verbs and nouns cannot be clearly distinguished on morphological grounds when functioning as predicates in Erzya. This study shows that even though predicativity must not be considered a sufficient tool for defining parts of speech in any language, the Erzya lexical classes of adjective, noun and verb can be distinguished from each other also in predicate position. The relative frequency and degree of obligation for using the predicative suffix construction decreases when moving left to right on the scale verb adjective/locative noun ( identificational statement). The predicative suffix is the main pattern in the present tense over the whole domain of nonverbal predication in Standard Erzya, but if it is replaced it is most likely to be with a zero-copula construction in a nominal predication. This study exploits the theory of (a)symmetry for the first time in order to describe verbal vs. nonverbal predication. It is shown that the asymmetry of paradigms and constructions differentiates the lexical classes. Asymmetrical structures are motivated by functional level asymmetry. Variation in predication as such adds to the complexity of the grammar. When symmetric structures are employed, the functional complexity of grammar decreases, even though morphological complexity increases. The genre affects the employment of predication strategies in Erzya. There are differences in the relative frequency of the patterns, and some patterns are totally lacking from some of the data. The clearest difference is that the past tense predicative suffix construction occurs relatively frequently in Standard Erzya, while it occurs infrequently in the other data. Also, the predicative suffixes of the present tense are used more regularly in written Standard Erzya than in any other genre. The genre also affects the incidence of the translative in uľ(ń)ems copula constructions. In translations from Russian to Erzya the translative case is employed relatively frequently in comparison to other data. This study reveals differences between the two Mordvinic languages Erzya and Moksha. The predicative suffixes (bound person markers) of the present tense are used more regularly in Moksha in all kinds of nonverbal predicate clauses compared to Erzya. It should further be observed that identificational statements are encoded with a predicative suffix in Moksha, but seldom in Erzya. Erzya clauses are more frequently encoded using zero-constructions, displaying agreement in number only.

Modeling growth of hydrogen bubbles in aluminum castings using the level-set method

A new approach is proposed to solve for the growth as well as the movement of hydrogen bubbles during solidification in aluminum castings. A level-set methodology has been adopted to handle this multiphase phenomenon. A microscale domain is considered and the growth and movement of hydrogen bubbles in this domain has been studied. The growth characteristics of hydrogen bubbles have been evaluated under free growth conditions in a melt having a hydrogen input caused b solidification occurring around the microdomain.

"Ei vittu, mennään röökille" : tutkimus sitaattien tehtävistä ja tekemisestä kaunokirjallis-journalistisissa lehtijutuissa

This research deals with direct speech quotations in magazine articles through two questions: As my major research question, I study the functions of speech quotations based on a data consisting of six literary-journalistic magazine articles. My minor research question builds on the fact that there is no absolute relation between the sound waves of the spoken language and the graphemes of the written one. Hence, I study the general thoughts on how utterances should be arranged in the written form based on a large review of literature and textbooks on journalistic writing as well as interviews I have made with magazine writers and editors, and the Council of Mass Media in Finland. To support my main research questions, I also examine the reference system of the Finnish language, define the aspects of the literary-journalistic article and study vernacular cues in written speech quotations. FUNCTIONS OF QUOTATIONS. I demonstrate the results of my analysis with a six-pointed apparatus. It is a continuum which extends from the structural level of text, all the way through the explicit functions, to the implicit functions of the quotation. The explicit functions deal with the question of what is the content, whereas the implicit ones base mainly on the question how the content is presented. 1. The speech quotation is an distinctive element in the structure of the magazine article. Thereby it creates a rhythm for the text, such as episodes, paragraphs and clauses. 2. All stories are told through a plot, and in magazine articles, the speech quotations are one of the narrative elements that propel the plot forward. 3. The speech quotations create and intensify the location written in the story. This location can be a physical one but also a social one, in which case it describes the atmosphere and mood in the physical environment and of the story characters. 4. The quotations enhance the plausibility of the facts and assumptions presented in the article, and moreover, when a text is placed between quotation marks, the reader can be assured that the text has been reproduced in the authentic verbatim way. 5. Speech quotations tell about the speaker's unique way of using language and the first-hand experiences of the person quoted. 6. The sixth function of speech quotations is probably the most essential one: the quotations characterize the quoted speaker. In other words, in addition to the propositional content of the utterance, the way in which it has been said transmits a lot of the speaker's character (e.g. nature, generation, behaviour, education, attitudes etc.). It is important to notice, that these six functions of my speech quotation apparatus do not exlude one another. It means that every speech quotation basically includes all of the functions discussed above. However, in practice one or more of them have a principal role, while the others play a subsidiary role. HOW TO MAKE QUOTATIONS? It is not suprising that the field of journalism (textbooks, literature and interviews) holds heterogeneous and unestablished thoughts on how the spoken language should be arranged in written quotations, which is my minor research question. However, the most frequent and distinctive aspects can be depicted in a couple of words: serve the reader and respect the target person. Very common advice on how to arrange the quotations is − firstly, to delete such vernacular cues (e.g. repetitions and ”expletives”) that are common in spoken communication, but purposeless in the written language. − secondly, to complete the phonetic word forms of the spoken language into a more reader-friendly form (esim. punanen → punainen, 'red'), and − thirdly, to enhance the independence of clauses from the (authentic) context and to toughen reciprocal links between them. According to the knowledge of the journalistic field, utterances recorded in different points in time of an interview or a data-collecting session can be transferred as consecutive quotations or even merged together. However, if there is any temporal-spatial location written in the story, the dialogue of the story characters should also be situated in an authentic context – chronologically in the right place in the continuum of the events. To summarize, the way in which the utterances should be arranged into written speech quotations is always situationally-specific − and it is strongly based on the author's discretion.

Site classification and estimation of surface level seismic hazard using geophysical data and probabilistic approach

This paper presents the site classification of Bangalore Mahanagar Palike (BMP) area using geophysical data and the evaluation of spectral acceleration at ground level using probabilistic approach. Site classification has been carried out using experimental data from the shallow geophysical method of Multichannel Analysis of Surface wave (MASW). One-dimensional (1-D) MASW survey has been carried out at 58 locations and respective velocity profiles are obtained. The average shear wave velocity for 30 m depth (Vs(30)) has been calculated and is used for the site classification of the BMP area as per NEHRP (National Earthquake Hazards Reduction Program). Based on the Vs(30) values major part of the BMP area can be classified as ``site class D'', and ``site class C'. A smaller portion of the study area, in and around Lalbagh Park, is classified as ``site class B''. Further, probabilistic seismic hazard analysis has been carried out to map the seismic hazard in terms spectral acceleration (S-a) at rock and the ground level considering the site classes and six seismogenic sources identified. The mean annual rate of exceedance and cumulative probability hazard curve for S. have been generated. The quantified hazard values in terms of spectral acceleration for short period and long period are mapped for rock, site class C and D with 10% probability of exceedance in 50 years on a grid size of 0.5 km. In addition to this, the Uniform Hazard Response Spectrum (UHRS) at surface level has been developed for the 5% damping and 10% probability of exceedance in 50 years for rock, site class C and D These spectral acceleration and uniform hazard spectrums can be used to assess the design force for important structures and also to develop the design spectrum.

A Front end Switched Rectifier DC Source for Neutral Point Balancing of A NPC Three-Level Inverter for The Full Modulation Range

A switched DC voltage three level NPC is proposed in this paper to eliminate capacitor balancing problems in conventional three-level Neutral Point Clamped (NPC) inverter. The proposed configuration requires only one DC link with a voltage V-dc/2, where V-dc is the DC link voltage in a onventional NPC inverter. To get rated DC link voltage (V-dc), the voltage source is alternately onnected in parallel to one of the two series capacitors using two switches and two diodes with device voltage rating of V-dc/2. The frequency at which the voltage source is switched is independent and will not affect the operation of NPC inverter. The switched voltage source in this configuration balances the capacitors automatically. The proposed configuration can also be used as a conventional two level inverter in lower modulation range, thereby increases the reliability of the drive system. A space vector based PWM scheme is used to verify this proposed topology.

Properties of iron related quenched-in levels in p-silicon

The electrical and optical properties of the thermally induced quenched-in levels in p-silicon which have heen attributed to iron are studied. The two levels, HI and H2, are located at Ev + 0.42 eV and Ev + 0.52 eV, respectively, as determined by TSCAP, DLTS, and transient photocapacitance methods. The photoionization cross sections are well described by Lucovsky's model. The hole capture by H1 is temperature dependent; a barrier of 40 meV is measured. However, multiphonon emission mechanism cannot be invoked to explain this temperature dependence due to the inferred zero lattice relaxation. The source of iron contamination is found to be the ambient conditions, in particular the quartz tube. The conflicting reports regarding the stability and the variation in the reported capture cross section values suggests that the observed Ev + 0.4 eV level must be a complex centre. The inferred near zero lattice relaxation during the electron transition implies weak coupling to the host lattice.

Detection and characterisation of strong resistance to phosphine in Brazilian Rhyzopertha dominica (F.) (Coleoptera: Bostrychidae)

As failure to control Rhyzopertha dominica (F.) with phosphine is a common problem in the grain-growing regions of Brazil, a study was undertaken to investigate the frequency, distribution and strength of phosphine resistance in R. dominica in Brazil. Nineteen samples of R. dominica were collected between 1991 and 2003 from central storages where phosphine fumigation had failed to control this species. Insects were cultured without selection until testing in 2005. Each sample was tested for resistance to phosphine on the basis of the response of adults to discriminating concentrations of phosphine (20 and 48 h exposures) and full dose-response assays (48 h exposure). Responses of the Brazilian R. dominica samples were compared with reference susceptible, weak-resistance and strong-resistance strains from Australia in parallel assays. All Brazilian population samples showed resistance to phosphine: five were diagnosed with weak resistance and 14 with strong resistance. Five samples showed levels of resistance similar to the reference strong-resistance strain. A representative highly resistant sample was characterised by exposing mixed-age cultures to a range of constant concentrations of phosphine for various exposure periods. Time to population extinction (TPE) and time to 99.9% suppression of population (LT99.9) values of this sample were generally similar to those of the reference strong-resistance strain. For example, at 0.1, 0.5 and 1.0 mg L-1, LT99.9 values for BR33 and the reference strong-resistance strain were respectively 21, 6.4 and 3.7 days and 17, 6.2 and 3.8 days. With both strains, doubling phosphine concentrations to 2 mg L -1 resulted in increased LT99.9 and TPE. High level and frequency of resistance in all population samples, some of which had been cultured without selection for up to 12 years, suggest little or no fitness deficit associated with phosphine resistance. The present research indicates that widespread phosphine resistance may be developing in Brazil. Fumigation practices should be monitored and resistance management plans implemented to alleviate further resistance development.

Successful management of colletotrichum crown and stolon rot in runner production in sub-tropical Australia

Crown, stolon, and petiole rots caused by Colletotrichum gloeosporioides (C.g.) were first identified in runner beds of the Queensland Approved Runner Scheme (QARS) in February 1989. The outbreaks occurred annually from 1990 to 1994. Minor losses in subsequent fruit crops occurred from 1990 to 1993, with 50% post-establishment losses occurring on fruit farms in southeast Queensland in 1994. The objective of this work was to provide a control strategy for the disease that would give stability to the QARS. Runner-bed trials in 1993-1994 showed that Octave® (462 g/kg prochloraz as the MnCl2 complex) was highly effective in reducing the incidence field symptoms and laboratory recovery of C.g. from symptomless petioles. A simple detached petiole laboratory test for measuring fungicide efficacy in runner bed trials and for laboratory screening of fungicides, is described. Scheme protocols were changed to require that only foundation plants from tissue culture were allowed onto QARS sites. These were to be symptomless and to have tested negative for the presence of C.g. The application of Octave® at fortnightly intervals in all QARS nurseries has reduced the level of visible symptoms and the laboratory recovery of C.g. from symptomless petioles to almost zero.

Simulating the effects of saline and sodic subsoils on wheat crops growing on Vertosols

Soils with high levels of chloride and/or sodium in their subsurface layers are often referred to as having subsoil constraints (SSCs). There is growing evidence that SSCs affect wheat yields by increasing the lower limit of a crop's available soil water (CLL) and thus reducing the soil's plant-available water capacity (PAWC). This proposal was tested by simulation of 33 farmers' paddocks in south-western Queensland and north-western New South Wales. The simulated results accounted for 79% of observed variation in grain yield, with a root mean squared deviation (RMSD) of 0.50 t/ha. This result was as close as any achieved from sites without SSCs, thus providing strong support for the proposed mechanism that SSCs affect wheat yields by increasing the CLL and thus reducing the soil's PAWC. In order to reduce the need to measure CLL of every paddock or management zone, two additional approaches to simulating the effects of SSCs were tested. In the first approach the CLL of soils was predicted from the 0.3-0.5 m soil layer, which was taken as the reference CLL of a soil regardless of its level of SSCs, while the CLL values of soil layers below 0.5 m depth were calculated as a function of these soils' 0.3-0.5 m CLL values as well as of soil depth plus one of the SSC indices EC, Cl, ESP, or Na. The best estimates of subsoil CLL values were obtained when the effects of SSCs were described by an ESP-dependent function. In the second approach, depth-dependent CLL values were also derived from the CLL values of the 0.3-0.5 m soil layer. However, instead of using SSC indices to further modify CLL, the default values of the water-extraction coefficient (kl) of each depth layer were modified as a function of the SSC indices. The strength of this approach was evaluated on the basis of correlation of observed and simulated grain yields. In this approach the best estimates were obtained when the default kl values were multiplied by a Cl-determined function. The kl approach was also evaluated with respect to simulated soil moisture at anthesis and at grain maturity. Results using this approach were highly correlated with soil moisture results obtained from simulations based on the measured CLL values. This research provides strong evidence that the effects of SSCs on wheat yields are accounted for by the effects of these constraints on wheat CLL values. The study also produced two satisfactory methods for simulating the effects of SSCs on CLL and on grain yield. While Cl and ESP proved to be effective indices of SSCs, EC was not effective due to the confounding effect of the presence of gypsum in some of these soils. This study provides the tools necessary for investigating the effects of SSCs on wheat crop yields and natural resource management (NRM) issues such as runoff, recharge, and nutrient loss through simulation studies. It also facilitates investigation of suggested agronomic adaptations to SSCs.

Effects of increasing neuromuscular electrical stimulation current intensity on cortical sensorimotor network activation: A time domain fNIRS study

Neuroimaging studies have shown neuromuscular electrical stimulation (NMES)-evoked movements activate regions of the cortical sensorimotor network, including the primary sensorimotor cortex (SMC), premotor cortex (PMC), supplementary motor area (SMA), and secondary somatosensory area (S2), as well as regions of the prefrontal cortex (PFC) known to be involved in pain processing. The aim of this study, on nine healthy subjects, was to compare the cortical network activation profile and pain ratings during NMES of the right forearm wrist extensor muscles at increasing current intensities up to and slightly over the individual maximal tolerated intensity (MTI), and with reference to voluntary (VOL) wrist extension movements. By exploiting the capability of the multi-channel time domain functional near-infrared spectroscopy technique to relate depth information to the photon time-of-flight, the cortical and superficial oxygenated (O₂Hb) and deoxygenated (HHb) hemoglobin concentrations were estimated. The O₂Hb and HHb maps obtained using the General Linear Model (NIRS-SPM) analysis method, showed that the VOL and NMES-evoked movements significantly increased activation (i.e., increase in O₂Hb and corresponding decrease in HHb) in the cortical layer of the contralateral sensorimotor network (SMC, PMC/SMA, and S2). However, the level and area of contralateral sensorimotor network (including PFC) activation was significantly greater for NMES than VOL. Furthermore, there was greater bilateral sensorimotor network activation with the high NMES current intensities which corresponded with increased pain ratings. In conclusion, our findings suggest that greater bilateral sensorimotor network activation profile with high NMES current intensities could be in part attributable to increased attentional/pain processing and to increased bilateral sensorimotor integration in these cortical regions.

Zero tillage and nitrogen fertiliser application in wheat and barley on a Vertosol in a marginal cropping area of south-west Queensland

Winter cereal cropping is marginal in south-west Queensland because of low and variable rainfall and declining soil fertility. Increasing the soil water storage and the efficiency of water and nitrogen (N) use is essential for sustainable cereal production. The effect of zero tillage and N fertiliser application on these factors was evaluated in wheat and barley from 1996 to 2001 on a grey Vertosol. Annual rainfall was above average in 1996, 1997, 1998 and 1999 and below average in 2000 and 2001. Due to drought, no crop was grown in the 2000 winter cropping season. Zero tillage improved fallow soil water storage by a mean value of 20 mm over 4 years, compared with conventional tillage. However, mean grain yield and gross margin of wheat were similar under conventional and zero tillage. Wheat grain yield and/or grain protein increased with N fertiliser application in all years, resulting in an increase in mean gross margin over 5 years from $86/ha, with no N fertiliser applied, to $250/ha, with N applied to target ≥13% grain protein. A similar increase in gross margin occurred in barley where N fertiliser was applied to target malting grade. The highest N fertiliser application rate in wheat resulted in a residual benefit to soil N supply for the following crop. This study has shown that profitable responses to N fertiliser addition in wheat and barley can be obtained on long-term cultivated Vertosols in south-west Queensland when soil water reserves at sowing are at least 60% of plant available water capacity, or rainfall during the growing season is above average. An integrative benchmark for improved N fertiliser management appears to be the gross margin/water use of ~$1/ha.mm. Greater fallow soil water storage or crop water use efficiency under zero tillage has the potential to improve winter cereal production in drier growing seasons than experienced during the period of this study.

Genetics of heifer performance in 'wet' and 'dry' seasons and their relationships with steer performance in two tropical beef genotypes.

The genetics of heifer performance in tropical 'wet' and 'dry' seasons, and relationships with steer performance, were studied in Brahman (BRAH) and Tropical Composite (TCOMP) (50% Bos indicus, African Sanga or other tropically adapted Bos taurus; 50% non-tropically adapted Bos taurus) cattle of northern Australia. Data were from 2159 heifers (1027 BRAH, 1132 TCOMP), representing 54 BRAH and 51 TCOMP sires. Heifers were assessed after post-weaning 'wet' (ENDWET) and 'dry' (ENDDRY) seasons. Steers were assessed post-weaning, at feedlot entry, over a 70-day feed test, and after similar to 120-day finishing. Measures studied in both heifers and steers were liveweight (LWT), scanned rump fat, rib fat and M. longissimus area (SEMA), body condition score (CS), hip height (HH), serum insulin-like growth factor-I concentration (IGF-I), and average daily gains (ADG). Additional steer measures were scanned intra-muscular fat%, flight time, and daily (DFI) and residual feed intake (RFI). Uni- and bivariate analyses were conducted for combined genotypes and for individual genotypes. Genotype means were predicted for a subset of data involving 34 BRAH and 26 TCOMP sires. A meta-analysis of genetic correlation estimates examined how these were related to the difference between measurement environments for specific traits. There were genotype differences at the level of means, variances and genetic correlations. BRAH heifers were significantly (P < 0.05) faster-growing in the 'wet' season, slower-growing in the 'dry' season, lighter at ENDDRY, and taller and fatter with greater CS and IGF-I at both ENDWET and ENDDRY. Heritabilities were generally in the 20 to 60% range for both genotypes. Phenotypic and genetic variances, and genetic correlations, were commonly lower for BRAH. Differences were often explained by the long period of tropical adaptation of B. indicus. Genetic correlations were high between corresponding measures at ENDWET and ENDDRY, positive between fat and muscle measures in TCOMP but negative in BRAH (mean of 13 estimates 0.50 and -0.19, respectively), and approximately zero between steer feedlot ADG and heifer ADG in BRAH. Numerous genetic correlations between heifers and steers differed substantially from unity, especially in BRAH, suggesting there may be scope to select differently in the sexes where that would aid the differing roles of heifers and steers in production. Genetic correlations declined as measurement environments became more different, the rates of decline (environment sensitivity) sometimes differing with genotype. Similar measures (LWT, HH and ADG; IGF-I at ENDWET in TCOMP) were genetically correlated with steer DFI in heifers as in steers. Heifer SEMA was genetically correlated with steer feedlot RFI in BRAH (0.75 +/- 0.27 at ENDWET, 0.66 +/- 0.24 at ENDDRY). Selection to reduce steer RFI would reduce SEMA in BRAH heifers but otherwise have only small effects on heifers before their first joining.