Photocatalytic degradation of methylene blue by TiO(2)-Cu thin films: Theoretical and experimental study

In this work the effect of doping concentration and depth profile of Cu atoms on the photocatalytic and surface properties of TiO(2) films were studied. TiO(2) films of about 200 nn thickness were deposited on glass substrates on which a thin Cu layer (5 nm) was deposited. The films were annealed during 1 s to 100 degrees C and 400 degrees C, followed by chemical etching of the Cu film. The grazing incidence X-ray fluorescence measurements showed a thermal induced migration of Cu atoms to depths between 7 and 31 nm. The X-ray photoelectron spectroscopy analysis detected the presence of TiO(2), Cu(2)O and Cu(0) phases and an increasing Cu content with the annealing temperature. The change of the surface properties was monitored by the increasing red-shift and absorption of the ultraviolet-visible spectra. Contact angle measurements revealed the formation of a highly hydrophilic surface for the film having a medium Cu concentration. For this sample photocatalytic assays, performed by methylene blue discoloration, show the highest activity. The proposed mechanism of the catalytic effect, taking place on Ti/Cu sites, is supported by results obtained by theoretical calculations. (C) 2010 Elsevier B.V. All rights reserved.

CuO and CuO-ZnO catalysts supported on CeO(2) and CeO(2)-LaO(3) for low temperature water-gas shift reaction

This paper describes an investigation on CuO and CuO-ZnO catalysts supported on CeO(2) and CeO(2)-La(2)O(3) oxides, which were designed for the low temperature water-gas shift reaction (WGSR). Bulk catalysts were prepared by co-precipitation of metal nitrates and characterized by energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD), surface area (by the BET method), X-ray photoelectron spectroscopy (XPS), and in situ X-ray absorption near edge structure (XANES). The catalysts` activities were tested in the forward WGSR, and the CuO/CeO(2) catalyst presented the best catalytic performance. The reasons for this are twofold: (1) the presence of Zn inhibits the interaction between Cu and Ce ions, and (2) lanthanum oxide forms a solid solution with cerium oxide, which will cause a decrease in the surface area of the catalysts. Also the CuO/CeO(2) catalyst presented the highest Cu content on the surface, which could influence its catalytic behavior. Additionally, the Cu and Cu(1+) species could influence the catalytic activity via a reduction-oxidation mechanism, corroborating to the best catalytic performance of the Cu/Ce catalyst. (c) 2010 Elsevier B.V. All rights reserved.

Metalogênese do depósito de Cu Cerro dos Martins, RS.

Este trabalho revisa a geologia e apresenta dados inéditos do Depósito de Cobre Cerro dos Martins (DCM), incluindo geocronologia Pb-Pb em zircão, inclusões fluidas, isótopos estáveis (C, O e S), composição isotópica do Sr e geoquímica de elementos maiores e traços das rochas vulcânicas encaixantes. O depósito está hospedado na seqüência vulcano-sedimentar do Grupo Bom Jardim, da Bacia do Camaquã, do Neoproterozóico do Escudo Sul Rio-grandense, e possui reservas calculadas de 1.450.000 t, com teor médio de 0,83% Cu. O depósito consiste de um conjunto de veios sulfetados que preenchem fraturas de direção N40º-60ºW em rochas andesíticas e sedimentares clásticas, com disseminações confinadas em níveis de siltito, arenito, andesito e conglomerado, da Formação Hilário do Grupo Bom Jardim. Os minerais do minério filoneano são a calcosina e bornita com calcopirita, pirita, galena e esfalerita subordinadas. Digenita, covelita, malaquita cuprita e azurita ocorrem como minério secundário em ganga constituída de carbonatos, quartzo, minerais argilosos, barita e rara hematita. A composição química das vulcânicas (elementos maiores e traços, incluindo ETR) indicam uma afinidade alcalina para o vulcanismo relacionado à Formação Hilário na região do Cerro dos Martins. Um corpo de quartzo-diorito, intrusivo nas rochas vulcânicas e sedimentares, mostrou idade de 550 ±5 Ma (Pb-Pb em zircões) indicando um valor mínimo para a geração do minério do DCM. Esta idade confirma a posição estratigráfica desta rocha na Formação Acampamento Velho e também fornece uma idade mínima para a deposição da seqüência vulcano-sedimentar encaixante do DCM. Os sulfetos do DCM mostram δS34 CDT com valores relativamente homogêneos entre - 6.2 e + 0.9‰ (n= 7). O valor de δS34 CDT da calcopirita, levemente positivo (+0.9‰), indica uma origem magmática para o S, mas os valores negativos encontrados nestes sulfetos, poderiam indicar o envolvimento de outras fontes com enxofre reduzido. Entretanto, a presença de hematita nas paragêneses minerais indica que o minério foi formado sob condições oxidantes, modificando a composição isotópica original do enxofre magmático (δS34 CDT ~ 0‰) para valores negativos. As baritas analisadas apresentam valores com δS34 CDT entre +9.25 e +10.65‰ (n=4) indicando deposição em condições oxidantes, originadas pela mistura de um fluido magmático-hidrotermal com água meteórica. A composição isotópica do C das calcitas do DCM varia com δC13 PDB entre - 1,90 a -4,45‰, interpretada como resultante da mistura entre carbono de fonte magmática com mármores do embasamento. Inclusões fluidas em quartzo do minério indicam temperaturas de deposição entre 157 e 273 °C com mediana de 215 °C (n = 45). A composição isotópica do oxigênio da água em equilibrio com a calcita do fluido hidrotermal (T= 215 °C) mostra valores de δ O18 SMOW entre 3 e 14, indicando H2O de origem magmática, com contribuição de água meteórica. A razão Sr87/Sr86 das mesmas calcitas mostram valores entre 0,7068 – 0,7087, de crosta superior. Rochas plutônicas e vulcânicas do escudo com idades próximas de 550 Ma possuem razões iniciais Sr87/Sr86 entre 0,704 – 0,710, compatíveis com aquelas encontradas nas calcitas da mineralização. Os fluidos hidrotermais do magmatismo shoshonítico-alcalino com idade de 595 Ma e Sr87/Sr86 entre 0,7041 a 0,7053, também são candidatos a fonte do Sr dos carbonatos hidrotermais, mas necessitariam de um componente mais radiogênico. Assim, a fonte de C-O e Sr das calcitas do minério pode ter sido originada diretamente de um fluido magmático-hidrotermal ou de uma mistura entre este fluido e mármores do embasamento. Portanto, o depósito Cerro dos Martins é interpretado como de origem magmática-hidrotermal, relacionado ao evento magmático alcalinoshoshonítico, pós-colisional da Orogênese Dom Feliciano, com idade entre 595-550 Ma. Novos modelos exploratórios para depósitos de cobre no Escudo do Rio Grande do Sul devem considerar o magmatismo alcalino na gênese dos depósitos.

Estudo da efetividade de barreiras de amortecimento no controle de vibrações geradas pelo desmonte com explosivos em mina de carvão à céu aberto

Este trabalho apresenta o estudo da efetividade de barreiras de amortecimento para atenuar a vibração causada pela propagação de ondas sísmicas oriundas de detonações. A barreira consta de uma porção do terreno cujas características de propagação são modificadas artificialmente pela detonação de uma linha de furos com parâmetros idênticos aos dos furos de produção. Os resultados obtidos demonstram a efetividade deste recurso, evidenciado pelo coeficiente de redução entre os valores de vibração gerados em situações com e sem o uso de barreira (0,41) e também através da mudança dos coeficientes da equação de previsão via Distância Escalonada, possibilitando em escala de produção o aumento na carga máxima por tempo de retardo ( 4,9 % à 118,9% ), com redução de custos devido ao menor consumo de retardos por furo ( -5,7 % à - 40,7 % ).

Nanocatalysts for sustainable industrial processses

In Chapter 1, rhodium nanoparticles were supported on multiwalled carbon nanotubes (MWCNTs) and bound to the magnetic core-shell system Fe3O4@TiO2. The composite Fe3O4@TiO2-Rh-MWCNT and the intermediates were characterized by SEM, EDS and TEM. Their catalytic activity was studied using i) the hydrogenation transfer of nitroarenes and cyclohexene in the presence of hydrazine hydrate; ii) the reduction of 2-nitrophenol with NaBH4; and iii) the decoloration of pigments in the presence of hydrogen peroxide. The results were monitored by gas chromatography (i) and UV Visible (ii and iii). In the second chapter, the catalytic activity of six oxidovanadium(V) aroylhydrazone complexes, viz. [VOL1(OEt)][VOL1(OEt)(EtOH)] (1), [VOL2(OEt)] (2), [Et3NH][VO2L1] (3), [VO2(H2L2)]2·EtOH (4), [VOL1(µ -O)VOL1] (5) and [VOL2(µ -O)VOL2] (6) (H2L1 = 3,5-di-tert-butyl-2-hydroxybenzylidene)-2hydroxybenzohydrazide and H2L2 = 3,5-di-tert-butyl-2-hydroxybenzylidene)-2 aminobenzohydrazide), anchored on nanodiamonds with different treatments, was studied towards the microwave-assisted partial oxidation of 1-phenylethanol to acetophenone in the presence of tert-butyl hydroperoxide (TBHP) as oxidant. A high selectivity for acetophenone was achieved for the optimized conditions. The possibility of recycling and reuse the heterogeneous catalysts was also investigated. In chapter 3, the catalytic activity of gold nanoparticles supported at different metal oxides, such as Fe2O3, Al2O3 ZnO or TiO2, was studied for the above reaction. The effect of the support, quantity of the catalyst and temperature was investigated. The recyclability of the gold catalysts was also studied. In the last chapter, a new copper nanocomposite with functionalized mutiwalled carbon nanotubes (Cu-MWCNT) was synthesized using a microwave assisted polyol method. The characterization was performed using XRD and SEM. The catalytic activity of Cu-MWCNT was studied through the degradation of pigments, such as amaranth, brilliant blue, indigo, tartrazine and methylene blue.

Direct determination of Cu, Cd, Ni and Pb in aquatic humic substances by graphite furnace atomic absorption spectrometry

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Metalização mecânica de ZrO2 com Ti para brasagem ZrO2/Aço com ligas de adição sem metal ativo

Metal/ceramic interfaces using zirconia have dominated the industrial applications in the last decade, due to the high mechanical strength and fracture toughness of zirconia, especially at temperatures below 300 ºC. Also noteworthy is the good ionic conductivity in high temperatures of this component. In this work joining between ZrO2 Y-TZP and ZrO2 Mg-PSZ with austenitic stainless steel was studied. These joints were brazed at high-vacuum after mechanical metallization with Ti using filler alloys composed by Ag-Cu and Ag-Cu-Ni. The influence of the metallization, and the affinity between the different groups (ceramic / filler alloys) was evaluated, in order to achieve strong metal/ceramic joints. Evaluation of joints and interfaces, also the characterization of base materials was implemented using various techniques, such as: x-ray diffraction, leak test, three-point flexural test and scanning electron microscopy with chemical analysis. The microstructural analysis revealed physical and chemical bonds in the metal/ceramic interfaces, providing superior leak proof joints and stress cracking, in order to a good joint in all brazed samples. Precipitation zones and reaction layers with eutetic characteristics were observed between the steel and the filler metal

Influência de fatores de risco na prevalência de hábitos bucais deletérios em crianças de 0 a 5 anos na cidade do Natal-RN

Literature has demonstrated to the narrow relation between deleterious habits and the occurrence of malocclusion in minors of 5 years. The existence of these habits, however, already considered as risk factors, having also, its determinative ones, which present cultural dimensions and economic social, many of them related to the parents of the child, having in account that such habits if develop in phases in which the child establish a narrow relation of dependence. This study it had an objective to investigate the prevalence of deleterious buccal habits in children and its relation with the economic social and characteristics of the parents. It was developed an epidemiologist study of transversal character with interview, through daily pay-tested form, with 218 parents in the day of the National Campaign of Vaccination. In the cast of the variable that had composed the study, they had been used, as changeable dependents, the use of the baby's bottle, bottle and the digital suction, being considered as outcomes of the research. Amongst the independent variable, the economic social factors (type of occupation, number of children, civil state, sort, schooling and age) and staffs of the parents (self perception in oral health) had entered as the variable to be analyzed in the problems of the infantile odontology. The collected data had been submitted to the analysis descriptive and inferential statistics, being used the test qui-square and the analysis of the possibility reasons. As main results, it was found that breast feeding before the six months if presents as one of the main factors of risk for the use of baby's bottle (p< 0.001, OR= 2.8, I.C= 1.589 4.906), bottle (p< 0.001, OR= 3.7, I.C.= 2.076 6.624) and digital suction (p< 0.014, OR= 3.5, I.C.= 1.225 10.181). From the data found, one concludes that breast-feeding is considered a primordial factor for not the installation of deleterious oral habits and that the economic social and cultural factors can reflect in central way in the performance of this act

Comparative degradation of ZnO- and SnO(2)-based polycrystalline non-ohmic devices by current pulse stress

The degradation behaviour of SnO(2)-based varistors (SCNCr) due to current pulses (8/20 mu s) is reported here for the first time in comparison with the ZnO-based commercial varistors (ZnO). Puncturing and/or cracking failures were observed in ZnO-based varistors possessing inferior thermo-mechanical properties in comparison with that found in a SCNCr system free of failures. Both systems presented electric degradation related to the increase in the leakage current and decrease in the electric breakdown field, non-linear coefficient and average value of the potential barrier height. However, it was found that a more severe degradation occurred in the ZnO-based varistors concerning their non-ohmic behaviour, while in the SCNCr system, a strong non-ohmic behaviour remained after the degradation. These results indicate that the degradation in the metal oxide varistors is controlled by a defect diffusion process whose rate depends on the mobility, the concentration of meta-stable defects and the amount of electrically active interfaces. The improved behaviour of the SCNCr system is then inferred to be associated with the higher amount of electrically active interfaces (85%) and to a higher energy necessary to activate the diffusion of the specific defects.

Study of copper complexes absorbed on a silica gel surface chemically modified with 5-amino-1,3,4-thiadiazole-2-thiol

The isotherms of adsorption of CuX2 (XCl-, Br-, ClO4-) by silica gel chemically modified with 5-amino-1,3,4-thiadiazole-2-thiol were studied in acetone and ethanol solutions, at 25 degrees C. The following equilibria constants (in L mol(-1)) were determined: (a) CuCl2, 3.2 x 10(3) (ac), 2.5 x 10(3) (eth); (b) CuBr2, 2.9 x 10(3) (ac), 2.3 x 10(3) (eth); (c) Cu(ClO4)(2), 1.8 x 10(3) (ac), 1.2 x 10(3) (eth); ac, acetone; eth, ethanol. The electron spin resonance spectra of the surface complexes indicated a tetragonal-distorted structure in the case of lower degrees of metal loading on the chemically modified surface. The d-d electronic transition spectra showed that for the ClO4- complex, the peak of absorption did not change for any degree of metal loading and for Cl- and Br- complexes, the peak maxima shifted to higher energy with lower metal loadings. (C) 1998 Academic Press.

Preparação de membranas de acetato de celulose organomodificadas para adsorção dos íons Cu(II), Cd(II), Mn(II) e Ni(II)

Cellulose acetate polymeric membranes had been prepared by a procedure of two steps, combining the method of phase inversion and the technique of hydrolysis-deposition. The first step was the preparation of the membrane, and together was organomodified with tetraethylortosilicate and 3-aminopropyltrietoxysilane. Parameters that exert influence in the complexation of the metallic ion, as pH, time of complexation, metal concentration, had been studied in laboratory using tests of metal removal. The membranes had presented resistance mechanics and reactivity to cations, being able to be an alternative for the removal, daily pay-concentration or in the study of the lability of metals complexed.

Preconcentration and determination of Cu(II) in a fresh water sample using modified silica gel as a solid-phase extraction adsorbent

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos da suplementação de fitase sobre a disponibilidade aparente de Mg, Ca, Zn, Cu, Mn e Fe em alimentos vegetais para a tilápia-do-nilo

Cem juvenis de tilápia-do-nilo (Oreochromis niloticus; PV = 100.0 ± 5.0 g) foram distribuídos em 10 tanques-rede com o objetivo de avaliar o efeito da suplementação da enzima fitase (0, 1.000 e 2.000 UFA/kg) sobre a disponibilidade de minerais em alguns alimentos energéticos (milho, milho extrusado, farelo de trigo, farelo de arroz e farelo de sorgo) e protéicos (farelo de soja extrusado, farelo de soja, farelo de girassol, farelo de algodão e glúten de milho) utilizados na alimentação de tilápia-do-nilo (Oreochromis niloticus). Para determinação dos coeficientes de disponibilidade aparente (CDA) do cálcio (Ca), magnésio (Mg), zinco (Zn), cobre (Cu), ferro (Fe) e manganês (Mn), foram confeccionadas 31 rações, marcadas com 0,10% de óxido de crômio III uma referência (ração purificada) e 30 contendo os dez alimentos e os diferentes níveis de suplementação da enzima fitase. O CDA dos nutrientes foi calculado com base no teor de crômio da ração e das fezes. A fitase aumenta, nos vegetais, a disponibilidade do Mg, Cu, Zn e Mn, os quais apresentam tendência diferenciada, em razão do seu valor biológico e do nível de suplementação de enzima.

Determination of Cd(II), Cu(II) and Ni(II) in aqueous samples by ICP-OES after on-line preconcentration in column packed with silica modified with 2-aminothiazole

This work describes the synthesis and characterization of 2-aminothiazole modified silica gel (SiAT) and the studies of adsorption and pre-concentration (in batch and using a flow-injection system coupled with optical emission spectrometer) of Cd(II), Cu(II) and Ni(II) in aqueous medium. The adsorption capacity for each metal ions in mmolg(-1) was: Cu(II) = 1.18, Ni(II) = 1.15 and Cd(II) = 1.10. The results obtained in the flow experiments showed about 100% of recovering of the metal ions adsorbed in a mini-column packed with 100 mg of SiAT, using 100 mu L of 2.0 mol L-1 HCl solution as eluent. The quantitative sorption-desorption of the metal ions made possible the application of a flow-injection system in the pre-concentration and quantification by ICP-OES of metal ions at trace level in natural water samples.