Síntese e caracterização de espinélios a base de Cu, Fe e Cr para pigmentos cerâmicos

Inorganic pigment comprises a host lattice, which is part of the chromophore component (usually a transition metal cation) and possible components modifiers, which stabilize, add or restate the properties pigments. Among the materials with spinel, ferrites, and the chromite stand out, because they have broad technological importance in the area of materials, applicability, pigments, catalytic hydrogenation, thin film, ceramic tiles, among others. The present work, pigments containing CuFe2O4, CuCr2O4,e CuFeCrO4, were synthesized by a method that makes use of gelatin as organic precursor using their application to ceramic pigments. The pigments were characterized by X-ray diffraction (XRD), Infrared spectroscopy, scanning electron microscopy (SEM) spectroscopy in the UV-visible and Colorimetry. The results confirmed the feasibility of the synthetic route used, with respect to powders synthesized, there is the formation of spinel phase from 500°C, with an increase in crystallinity and the formation of other phases. The pigments were shown to be crystalline and the desired phases were obtained. The copper chromite have hues ranging from green to black according to the calcination temperature, while the copper chromite doped with iron had brownish. The ferrites showed copper color and darker brown to black, which may indicate an interesting factor because of the importance of black pigment

Contribuição à gestão ambiental de lodo de esgoto em solos tropicais: determinação da fração de mineralização de compostos nitrogenados.

As quantidades de lodo de esgoto a serem aplicadas a solos agrícolas são determinadas em função de diversos critérios. Um desses critérios considera a quantidade de nitrogênio inorgânico que o resíduo poderá gerar no solo, como nitrato, durante sua mineralização. A prática vigente atualmente no Brasil para definição de dosagens de lodo de esgoto a aplicar em solos agrícolas é determinada pelo CONAMA - Conselho Nacional do Meio Ambiente. Na Resolução 375, publicada em 2006 por esse órgão, recomenda-se a utilização do valor de 20% de disponibilização de N para lodos de esgoto que passem pelo tratamento anaeróbio. Esse valor, entretanto, baseia-se em dados obtidos para solos em climas temperados. Em solos tropicais, já se dispõe de dados de pesquisa, que preconizam índices de disponibilização de N superiores aos da atual legislação. Como o nitrato é altamente lixiviável no perfil do solo, se for gerado em quantidades superiores às absorvidas pelas plantas, torna-se um poluente potencial de águas subsuperficiais. Por essa razão, há necessidade de pesquisas com maior número de solos, dada a grande extensão do território brasileiro, visando-se o estabelecimento e validação de índices locais de disponibilização de N em solos tratados com lodos de esgoto. Porém, ainda não se dispõe de um protocolo específico para a determinação da fração de mineralização de compostos nitrogenados de lodos de esgoto utilizados na agricultura. Visando contribuir para isso, foi estabelecido neste trabalho um protocolo para a determinação da fração de mineralização de compostos de N presentes em lodos de esgoto, quando aplicados em solos agrícolas. Nele, são estabelecidas, passo a passo, as etapas para a estimativa desse índice, utilizando-se as metodologias usuais no Brasil em análises de solo e de resíduos. São apresentados ao final do protocolo resultados experimentais que mostram taxas de mineralização de nitrogênio superiores a estipulada na atual legislação.

Influência do uso de combustíveis alternativos na síntese por combustão via microondas para a produção de materiais cerâmicos com estrutura espinélio

The development and study of detectors sensitive to flammable combustible and toxic gases at low cost is a crucial technology challenge to enable marketable versions to the market in general. Solid state sensors are attractive for commercial purposes by the strength and lifetime, because it isn t consumed in the reaction with the gas. In parallel, the use of synthesis techniques more viable for the applicability on an industrial scale are more attractive to produce commercial products. In this context ceramics with spinel structure were obtained by microwave-assisted combustion for application to flammable fuel gas detectors. Additionally, alternatives organic-reducers were employed to study the influence of those in the synthesis process and the differences in performance and properties of the powders obtained. The organic- reducers were characterized by Thermogravimetry (TG) and Derivative Thermogravimetry (DTG). After synthesis, the samples were heat treated and characterized by Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), analysis by specific area by BET Method and Scanning Electron Microscopy (SEM). Quantification of phases and structural parameters were carried through Rietveld method. The methodology was effective to obtain Ni-Mn mixed oxides. The fuels influenced in obtaining spinel phase and morphology of the samples, however samples calcined at 950 °C there is just the spinel phase in the material regardless of the organic-reducer. Therefore, differences in performance are expected in technological applications when sample equal in phase but with different morphologies are tested

Síntese de pigmentos cerâmicos inorgânicos nanométricos e encapsulados com estrutura core-shell pela rota dos precursores poliméricos

The present work has as objective the development of ceramic pigments based in iron oxides and cobalt through the polymeric precursor method, as well as study their characteristics and properties using methods of physical, chemical, morphological and optical characterizations.In this work was used iron nitrate, and cobalt citrate as precursor and nanometer silica as a matrix. The synthesis was based on dissolving the citric acid as complexing agent, addition of metal oxides, such as chromophores ions and polymerization with ethylene glycol. The powder obtained has undergone pre-ignition, breakdown and thermal treatments at different calcination temperatures (700 °C, 800 °C, 900 °C, 1000 °C and 1100 °C). Thermogravimetric analyzes were performed (BT) and Differential Thermal Analysis (DTA), in order to evaluate the term decomposition of samples, beyond characterization by techniques such as BET, which classified as microporous materials samples calcined at 700 ° C, 800 º C and 900 º C and non-porous when annealed at 1000 ° C and 1100 º C, X-ray diffraction (XRD), which identified the formation of two crystalline phases, the Cobalt Ferrite (CoFe2O4) and Cristobalite (SiO2), Scanning Electron Microscopy (SEM) revealed the formation of agglomerates of particles slightly rounded;and Analysis of Colorimetry, temperature of 700 °C, 800 °C and 900 °C showed a brown color and 1000 °C and 1100 °C violet

Regimes alimentares no cavalo de desporto : a utilização de alimentos compostos complementares na suplementação das dietas

Dissertação de Mestrado em Engenharia Zootécnica / Produção Animal

Desenvolvimento e caracterização de filtros cerâmicos para aplicações a altas temperaturas

Ceramic filters are cellular structures that can be produced by various techniques, among which we highlight the replication method, or method of polymeric sponge. This method consists of impregnating polymeric foam with ceramic slurry, followed by heat treatment, where will occur decomposition of organic material and the sinter of the ceramic material, resulting in a ceramic whose structure is a replica of the impregnated sponge. Ceramic filters have specific properties that make this type of material very versatile, used in various technological applications such as filters for molten metals and burners, make these materials attractive candidates for high temperature applications. In this work we studied the systems Al2O3-LZSA ceramic filters processed in the laboratory, and commercial Al2O3-SiC ceramics filters, both obtained by the replica method, this work proposes the thermal and mechanical characterization. The sponge used in the processing of filters made in the laboratory was characterized by thermogravimetric analysis. The ceramic filters were characterized by compressive strength, flexural strength at high temperatures, thermal shock, permeability and physical characterization (density and porosity) and microstructural (MEV and X-rays). From the results obtained, the analysis was made of the mechanical behavior of these materials, comparing the model proposed by Gibson and Ashby model and modified the effective area and the tension adjusted, where the modified model adapted itself better to the experimental results, representing better the mechanical behavior of ceramic filters obtained by the replica method

Preparação e caracterização de filmes cerâmicos para cátodos de células a combustível de óxido sólido

Alternative and clean energy generation research has been intensified in last decades. Among the alternatives, fuel cells are one of the most important. There are different types of fuel cells, among which stands out intermediate temperature solid oxide fuel cell (IT-SOFC) matter of the present work. For application as cathode on this type of devices, the ceramic Ba0.5Sr0.5C0.8Fe0.2O3-δ doped with rare earth ions (Nd, Sm) have been quite promising because they show good ionic conductivity and operate at relatively low temperatures (500 - 800°C). In this work, Ba0.5Sr0.5Co0.8Fe0.2O3-δ, (BaSr)0.5Sm0.5Co0.8Fe0.2O3-δ and (BaSr)0.5Nd0.5C0.8Fe0.2O3-δ were obtained by modified Pechini method, making use of gelatin as polymerizing agent. The powders were characterized by X-Ray Diffraction (XRD), Temperature Programmed Reduction (TPR) and Scanning Electron Microscopy (SEM). The perovskite phase was observed in all X-ray patterns for the materials Ba0.5Sr0.5C0.8Fe0.2O3-δ doped with rare earth ions (Nd, Sm). The SEM images showed that the materials have a characteristics porous, with very uniform pore distribution, which are favorable for application as cathodes. Subsequently, screen-printed assymmetrical cells were studied by impedance spectroscopy, to assess the kinetics of the cathode for the reduction reaction of oxygen. The best resistance to the specific area was found for the cathode BSSCF sintered at 1050 °C for 4 hours with around 0.15 Ω.cm2 at 750 °C as well as cathodes BSNCF and BSCF obtained resistances specific area of 0.2 and 0.73 Ω.cm2, respectively, for the same conditions. The polarization curves showed similar behavior to the best cathodes BSSCF and BSNCF, such combination of properties indicates that the film potentially depict good performance as IT-SOFC cathodes

Nanofiltração na produção de vinhos: redução de acidez volátil e de compostos fenólicos indesejados

Dissertação de Mestrado, Engenharia Biológica, Faculdade de Ciências e Tecnologias, Universidade do Algarve, 2014

Estabilidade térmica dos compostos biologicamente ativos do colostro

Dissertação de Mestrado, Engenharia Biológica, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015

Influencia de la inserción de nano-óxidos cerámicos sobre la microestructura y propiedades de una porcelana triaxial.

La nanociencia y nanotecnología han revolucionado las investigaciones en ciencia de los materiales, permitiendo el desarrollo de nuevos productos con desempeño superior a los convencionales. Conceptos nanotecnológicos como la adición de partículas en tamaños nanométricos para incrementar las propiedades finales han sido demostrados en cerámicos, sin embargo esta alternativa prácticamente no ha sido investigada en sistemas porcelánicos, específicamente en porcelanas triaxiales con aplicaciones eléctricas. Este trabajo de investigación presenta el desarrollo de una formulación de porcelana triaxial silicosa, de grado eléctrico, con características mecánicas y dieléctricas mejoradas mediante la incorporación de nanopartículas cerámicas. Se estudió la influencia de la adición de dos tipos de óxidos cerámicos en tamaño nanométrico, α- alúmina (α-Al2O3) y circonia (ZrO2), en las propiedades y microestructura de la porcelana triaxial, al variar la concentración de las nanopartículas en la composición inicial. En la primera parte de la experimentación, se elaboraron probetas experimentales siguiendo un proceso a nivel laboratorio haciendo uso de un conformado por presión uniaxial. Posteriormente, se elaboraron pastas porcelánicas a nivel planta-prototipo mediante un proceso de conformado por extrusión plástica. Las probetas sinterizadas fueron caracterizadas mediante evaluaciones físicas tales como densidad, porosidad, absorción de humedad y contracción lineal; así mismo se llevaron a cabo análisis microestructurales y de fases a través de las técnicas de DR-X, MEB y DSC-TGA. Por último, se realizaron evaluaciones mecánicas por medio de ensayos de resistencia a la compresión y módulo de ruptura (por tres puntos), así como la evaluación de la capacidad aislante con pruebas de resistencia dieléctrica. Los resultados obtenidos demuestran que la inserción de nanopartículas de alúmina y circonia, ayudan en el reforzamiento mecánico del sistema porcelánico triaxial estudiado, además de mejorar sus características dieléctricas, lo que representa una alternativa tecnológicamente factible para mejorar el desempeño de productos de porcelana, como es el caso de aisladores eléctricos

Compostos bioativos de microalgas com interesse no tratamento da diabetes

Dissertação de Mestrado, Biologia Molecular e Microbiana, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2016

Preparação e caracterização de catalisadores à base de titânio suportado em MCM-41 para produção de compostos oxigenados através da pirólise catalítica do capim elefante

In recent years, the area of advanced materials has been considerably, especially when it comes to materials for industrial use, such as is the case with structured porosity of catalysts suitable for catalytic processes. The use of catalysts combined with the fast pyrolysis process is an alternative to the oxygenate production of high added value, because, in addition to increasing the yield and quality of products, allows you to manipulate the selectivity to a product of interest, and therefore allows greater control over the characteristics of the final product. Based on these arguments, in this work were prepared titanium catalysts supported on MCM-41 for use in catalytic pyrolysis of biomass, called elephant grass. The reactions of pyrolysis of biomass were performed in a micro pyrolyzer, Py-5200, coupled to GC / MS, the company CDS Corporation, headquartered in the United States. The catalysts Ti-MCM-41 in different molar ratios were characterized by XRD, TG / DTG, FT-IR, SEM, XRF, UV-visible adsorption of nitrogen and the distribution of particle diameter and specific surface area measurement by the BET method. From the catalytic tests it was observed that the catalysts synthesized showed good results for the pyrolysis reaction.The main products were obtained a higher yield of aldehydes, ketones and furan. It was observed that the best reactivity is a direct function of the ratio Si/Ti, nature and concentration of the active species on mesoporous supports. Among the catalysts Ti-MCM-41 (molar ratio Si / Ti = 25 and 50), the ratio Si / Ti = 25 (400 ° C and 600 ° C) favored the cracking of oxygenates such as acids , aldehydes, ketones, furans and esters. Already the sample ratio Si / Ti = 50 had the highest yield of aromatic oxygenates

Valorização integrada de resíduos e subprodutos da extração do azeite: extração e caraterização de compostos bioativos do bagaço de azeitona

Dissertação de Mestrado, Tecnologia de Alimentos, Instituto Superior de Engenharia, Universidade do Algarve, 2016