Mixed mode (I and II) crack tip fields in bulk metallic glasses

Stationary crack tip fields in bulk metallic glasses under mixed mode (I and II) loading are studied through detailed finite element simulations assuming plane strain, small scale yielding conditions. The influence of internal friction or pressure sensitivity on the plastic zones. notch deformation, stress and plastic strain fields is examined for different mode mixities. Under mixed mode loading, the notch deforms into a shape such that one part of its surface sharpens while the other part blunts. Increase in mode If component of loading dramatically enhances the normalized plastic zone size, lowers the stresses but significantly elevates the plastic strain levels near the notch tip. Higher internal friction reduces the peak tangential stress but increases the plastic strain and stretching near the blunted part of the notch. The simulated shear bands are straight and extend over a long distance ahead of the notch tip under mode II dominant loading. The possible variations of fracture toughness with mode mixity corresponding to failure by brittle micro-cracking and ductile shear banding are predicted employing two simple fracture criteria. The salient results from finite element simulations are validated by comparison with those from mixed mode (I and II) fracture experiments on a Zr-based bulk metallic glass.

Deciphering the Distinct Role for the Metal Coordination Motif in the Catalytic Activity of Mycobacterium smegmatis Topoisomerase I

Mycobacterium smegmatis topoisomerase I (Mstopol) is distinct from typical type IA topoisomerases. The enzyme binds to both single- and double-stranded DNA with high affinity, making specific contacts. The enzyme comprises conserved regions similar to type IA topoisomerases from Escherichia coli and other eubacteria but lacks the typically found zinc fingers in the carboxy-terminal domain. The enzyme can perform DNA cleavage m the absence of Mg2+ but religation needs exogenously added Mg2+. One molecule of Mg2+ tightly bound to the enzyme has no role in DNA cleavage but is needed only for the religation reaction. The toprim. (topoisomerase-primase) domain in MstopoI comprising the Mg2+ binding pocket, conserved in both type IA and type II topoisomerases, was subjected to mutagenesis to understand the role of Mg2+, in different steps of the reaction. The residues D108, D110, and E112 of the enzyme, which form the acidic triad in the DXDXE motif, were changed to alanines. D108A mutation resulted in an enzyme that is Mg2+ dependent for DNA cleavage unlike Mstopol and exhibited enhanced DNA cleavage property and reduced religation activity. The mutant was toxic for cell growth, most likely due to the imbalance in cleavage-religation equilibrium. In contrast, the E112A mutant behaved like wild-type enzyme, cleaving DNA in a Mg2+-independent fashion, albeit to a reduced extent. Intra- and intermolecular religation assays indicated specific roles for D108 and E112 residues during the reaction. Together, these results indicate that the D108 residue has a major role during cleavage and religation, while E112 is important for enhancing the efficiency of cleavage. Thus, although architecturally and mechanistically similar to topoisomerase I from E. coli, the metal coordination pattern of the mycobacterial enzyme is distinct, opening up avenues to exploit the enzyme to develop inhibitors.

Reverie I

Reverie I is a large-scale public art work commissioned by the Brisbane City Council for permanent installation on the Gardens Point Road Plinth adjacent to QUT Gardens Point campus in Brisbane. The work forms part of the artist's ongoing exploration of the methodology of self-portraiture and amorphous form. In this work, sculpted curls of hair have been assembled according to contours of its constituent cast panels - their capacity to nest with one another determined the final form of the work. The resulting mass of curls resembles both an oversized wig, a withered mulberry and a leaden cloud to invoke notions of movement, reflection and temporality. From the didactic panel: "The curls of Reverie I are derived from 18th century sculptural portraiture. The twisting forms of the highly styled wig known as a periwig were abstracted and inventive, while also bestowing an air of intellectual authority. Curls also evoke two aspects of this particular site: the erratic movement of water associated with the complex tidal movements of Brisbane River, and a state of mental reflection relevant to both the nearby university grounds (where intellectual work takes place) and the riverside pathway (a site for daydreaming)."

Novel 3-dimensional sixfold interpenetrating diamondoid networks of copper(I) coordination polymers of polypyridyl ligands - Syntheses,characterization and crystal structures

Two new coordination polymers [Cu(L-1)(2)](n)(ClO4)(n)center dot 2nH(2)O (1), [Cu(L-2)(2)](n)(ClO4)(n)center dot 2nH(2)O (2) of polydentate imine/pyridyl ligands, L-1 and L-2 with Cu(I) ion have been synthesized and characterized by single crystal X-ray diffraction studies, elemental analyses, IR' UV-vis and NMR spectroscopy. They represent 3-dimensional, sixfold interpenetrating diamondoid network structures having large pores of dimension, 35 x 21 angstrom(2) in 1 and 38 x 19 angstrom(2) in 2, respectively.

Prevalence and determinants of respiratory symptoms, asthma, chronic bronchitis and allergic sensitization in Helsinki : A comparison between Finland, Sweden and Estonia. The FinEsS studies - Helsinki I

Objectives: To assess the prevalence and risk factor profiles of respiratory symptoms, asthma and chronic bronchitis in Helsinki, and to compare these results with those for Sweden and Estonia. Other important aims were to evaluate the prevalence and determinants of type 1 sensitization in Helsinki. Materials and methods: This presentation is a part of a large epidemiological study in Finland, Estonia and Sweden (FinEsS). The first part of the study consisted of a postal questionnaire in 1995-1996 distributed to subjects in eight study centres. The study population in each centre was a population-based random sample designed to be representative of the general population. The original study sample in Helsinki consisted of 8000 subjects aged 20-69 years, 6062 (76%) of whom participated. Comparisons between countries were based on a narrower age group, 20-64 years, since 64 years was the upper age limit used in the original study in Estonia. Thus, altogether 58 661 subjects aged 20-64 years were invited to participate in Finland, Sweden and Estonia, and 44 483 (76%) did so. The second part of the study was a clinical study with a structured interview, lung function measurements and skin-prick tests with 15 common allergens. This thesis reports only the results of the prick tests in Helsinki. Of the 1200 subjects invited to participate in Helsinki, 643 (54%) consented. Skin-prick tests were performed on subjects ≤ 60 years of age; thus, a total of 498 tests were done. Results: In Helsinki, the prevalence of physician-diagnosed asthma was 6.6% and of physician-diagnosed chronic bronchitis 3.7% among subjects aged 20-69 years. Comparison of the results between Finland, Sweden and Estonia in subjects 20-64 years of age revealed the highest prevalence of physician-diagnosed asthma in Sweden, 7.8%, while the prevalence in Finland was 5.9% and in Estonia 2.0% (p<0.001). The prevalence of physician-diagnosed asthma among those aged 20-29 years was 7.9% in Stockholm, 6.3% in Helsinki and 2.8% in Tallinn. Asthma-related symptoms were most common in Estonia, and among those with typical asthma symptoms the diagnosis of asthma was least likely in Estonia. Physician-diagnosed chronic bronchitis was reported to be 10.7% in Estonia, 3.1% in Sweden and 2.9% in Finland among subjects aged 20-64 years (p<0.001). Among those aged 20-29 years, 7.6% in Tallinn reported physician-diagnosed chronic bronchitis, while the prevalence estimates were 1.4% in Stockholm and 1.3% in Helsinki. The prevalence of smoking was similar for women in all three countries, around 30%, but large differences in smoking habits were present among men; 60% of Estonian, 39% of Finnish and 28% of Swedish men smoked. Skin-prick tests in Helsinki revealed a high prevalence of sensitization, 46.9%. For subjects aged 26-39 years, the prevalence was highest, 56.8%, and 23.7% were sensitized to at least four allergens. The most common sensitizing allergen was the dog. Sensitization to multiple allergens was associated with a high prevalence of asthma and allergic rhinitis. Conclusions: Compared with earlier Finnish studies, a higher prevalence of asthma and a lower prevalence of chronic bronchitis were found in Helsinki. The prevalence of physician-diagnosed chronic bronchitis was low in Helsinki, with only one-fifth of subjects fulfilling the symptom criteria for chronic bronchitis reporting having a diagnosis of chronic bronchitis. The prevalences of asthma and chronic bronchitis were similar in Finland and Sweden, but in Estonia physician-diagnosed asthma was less common and physician-diagnosed chronic bronchitis more common, particularly among young subjects. Further analyses revealed that the diagnosis of asthma was favoured in Finland and Sweden, while the diagnosis of chronic bronchitis was more likely in Estonia for subjects with the same symptoms. Allergic sensitization was common in Helsinki. Our findings of multiple sensitization also speak in favour of evaluating the degree of sensitization when assessing allergies.

Ligand Specificity of Group I Biotin Protein Ligase of Mycobacterium tuberculosis

Background: Fatty acids are indispensable constituents of mycolic acids that impart toughness & permeability barrier to the cell envelope of M. tuberculosis. Biotin is an essential co-factor for acetyl-CoA carboxylase (ACC) the enzyme involved in the synthesis of malonyl-CoA, a committed precursor, needed for fatty acid synthesis. Biotin carboxyl carrier protein (BCCP) provides the co-factor for catalytic activity of ACC. Methodology/Principal Findings: BPL/BirA (Biotin Protein Ligase), and its substrate, biotin carboxyl carrier protein (BCCP) of Mycobacterium tuberculosis (Mt) were cloned and expressed in E. coli BL21. In contrast to EcBirA and PhBPL, the similar to 29.5 kDa MtBPL exists as a monomer in native, biotin and bio-5'AMP liganded forms. This was confirmed by molecular weigt profiling by gel filtration on Superdex S-200 and Dynamic Light Scattering (DLS). Computational docking of biotin and bio-5'AMP to MtBPL show that adenylation alters the contact residues for biotin. MtBPL forms 11 H-bonds with biotin, relative to 35 with bio-5'AMP. Docking simulations also suggest that bio-5'AMP hydrogen bonds to the conserved `GRGRRG' sequence but not biotin. The enzyme catalyzed transfer of biotin to BCCP was confirmed by incorporation of radioactive biotin and by Avidin blot. The K-m for BCCP was similar to 5.2 mu M and similar to 420 nM for biotin. MtBPL has low affinity (K-b = 1.06 x 10(-6) M) for biotin relative to EcBirA but their K-m are almost comparable suggesting that while the major function of MtBPL is biotinylation of BCCP, tight binding of biotin/bio-5'AMP by EcBirA is channeled for its repressor activity. Conclusions/Significance: These studies thus open up avenues for understanding the unique features of MtBPL and the role it plays in biotin utilization in M. tuberculosis.

I build my dwelling

'I build my dwelling' was an exhibition of works including ‘Muscle flex’, ‘Language is, Language is not’, ‘S.O.S’ and the ‘Studio Remix’, held at Metro Arts Galleries, Brisbane in 2012. This body of work pursues a feminist engagement with art history and philosophy, engaging with pictorial, literary and vernacular quotations in order to replay and reveal the complexities of gender politics, representation and language.

The dynamics of magnetically trapped fluids. I - Implications for umbral dots and penumbral grains

A study of the magnetohydrodynamic system in which a nonmagnetized fluid in a gravitational field is surrounded by a fluid carrying a vertical magnetic field is presented. It is pointed out that this study can throw some light on the fine-structural features of a sunspot. The equilibrium configuration of the field-free fluid is a tapering column ending at an apex. The regions away form the apex can be studied by the slender flux tube approximation. A scheme developed to treat the apex indicates that, just below the apex, the radius of the tapering column opens up with a 3/2 power dependence on the depth below the apex. If the internal pressure of the field-free fluid is increased, the apex rises, and a static equilibrium may not be possible beyond a limit if the magnetic pressure drops quickly above a certain height. The nature of steady-flow solutions beyond this limit is investigated. Under conditions inside a sunspot, a column of field-free gas is found to rise with a velocity of about 100 km/hr. If umbral dots and penumbral grains are interpreted as regions where the field-free gas ultimately emerges, a very natural explanation of most of their observed properties is obtained.

Recognition, comorbidity, and outcome of DSM-IV bipolar I and II disorders in psychiatric care

This study is part of an ongoing collaborative bipolar research project, the Jorvi Bipolar Study (JoBS). The JoBS is run by the Department of Mental Health and Alcohol Research of the National Public Health Institute, Helsinki, and the Department of Psychiatry, Jorvi Hospital, Helsinki University Central Hospital (HUCH), Espoo, Finland. It is a prospective, naturalistic cohort study of secondary level care psychiatric in- and outpatients with a new episode of bipolar disorder (BD). The second report also included 269 major depressive disorder (MDD) patients from the Vantaa Depression Study (VDS). The VDS was carried out in collaboration with the Department of Psychiatry of the Peijas Medical Care District. Using the Mood Disorder Questionnaire (MDQ), all in- and outpatients at the Department of Psychiatry at Jorvi Hospital who currently had a possible new phase of DSM-IV BD were sought. Altogether, 1630 psychiatric patients were screened, and 490 were interviewed using a semistructured interview (SCID-I/P). The patients included in the cohort (n=191) had at intake a current phase of BD. The patients were evaluated at intake and at 6- and 18-month interviews. Based on this study, BD is poorly recognized even in psychiatric settings. Of the BD patients with acute worsening of illness, 39% had never been correctly diagnosed. The classic presentations of BD with hospitalizations, manic episodes, and psychotic symptoms lead clinicians to correct diagnosis of BD I in psychiatric care. Time of follow-up elapsed in psychiatric care, but none of the clinical features, seemed to explain correct diagnosis of BD II, suggesting reliance on cross- sectional presentation of illness. Even though BD II was clearly less often correctly diagnosed than BD I, few other differences between the two types of BD were detected. BD I and II patients appeared to differ little in terms of clinical picture or comorbidity, and the prevalence of psychiatric comorbidity was strongly related to the current illness phase in both types. At the same time, the difference in outcome was clear. BD II patients spent about 40% more time depressed than BD I patients. Patterns of psychiatric comorbidity of BD and MDD differed somewhat qualitatively. Overall, MDD patients were likely to have more anxiety disorders and cluster A personality disorders, and bipolar patients to have more cluster B personality disorders. The adverse consequences of missing or delayed diagnosis are potentially serious. Thus, these findings strongly support the value of screening for BD in psychiatric settings, especially among the major depressive patients. Nevertheless, the diagnosis must be based on a clinical interview and follow-up of mood. Comorbidity, present in 59% of bipolar patients in a current phase, needs concomitant evaluation, follow-up, and treatment. To improve outcome in BD, treatment of bipolar depression is a major challenge for clinicians.

Catalytic cyclopropanation of olefins using copper(I) diphosphinoamines

Catalytic cyclopropanation reactions of olefins with ethyl diazoacetate were carried out using copper(I) diphosphinoamine (PPh2)(2)N(R) (R = Pr-i, H, Ph and -CH2-C6H4-CH=CH2) complexes at 40 degrees C in chloroform. High yields of the cyclopropanes were obtained in all cases. The rate of the reaction was influenced by the nuclearity of the complex and the binding mode of the ligand which was either bridging or chelating. Comparison of isostructural complexes shows that the rate follows the order R = Pr-i > H > Ph, where R is the substituent on the N. However, cyclopropane formation versus dimerization of the carbene, and trans to cis ratios of cyclopropane was similar in all cases. The nearly identical selectivity for different products formed was indicative of a common catalytic intermediate. A labile "copper-olefin" complex which does not involve the phosphine or the counterion is the most likely candidate. The differences in the reaction rates for different complexes are attributed to differences in the concentration of the catalytically active species which are in equilibrium with the catalytically inactive copper-phosphinoamine complex. To test the hypothesis a diphosphinoamine polymer complexed to copper(I) was used as a heterogeneous catalyst. Leaching of copper(I) and deactivation of the catalyst confirmed the proposed mechanism. (C) 2008 Elsevier B. V. All rights reserved.

Chelating and bridging diphosphinoamine (PPh2)(2)N(Pr-i) complexes of copper(I)

The ligand bis(diphenylphosphino) isopropylamine (dppipa) has been shown to be a versatile ligand sporting different coordination modes and geometries dictated by copper(I). Most of the molecular structures were confirmed by X-ray crystallography. It is found in a chelating mode, in a monomeric complex when the ligand to copper ratio is 2:1. A tetrameric complex is formed when low ratios of ligand to metal (1: 2) were used. But with increasing ratios of ligand to metal (1: 1 and 2: 1), a trimer or a dimer was obtained depending on the crystallization conditions. Variable temperature P-31{H-1} NMR spectra of these complexes in solution showed that the Cu-P bond was labile and the highly strained 4-membered structure chelate found in the solid state readily converted to a bridged structures. On the other hand, complexes with the ligand in a bridging mode in the solid state did not form chelated structures in solution. The effect of adding tetra-alkylammonium salts to solutions of various complexes of dppipa were probed by P-31{H-1} NMR and revealed the effect of counter ions on the stability of complexes in solution. (C) 2008 Elsevier B.V. All rights reserved.

Conformation of di-n-propylglycine residues (Dpg) in peptides: crystal structures of a type I-turn forming tetrapeptide and an -helical tetradecapeptide

The crystal structures of two oligopeptides containing di-n-propylglycine (Dpg) residues, Boc-Gly-Dpg-Gly-Leu-OMe (1) and Boc-Val-Ala-Leu-Dpg-Val-Ala-Leu-Val-Ala-Leu-Dpg-Val-Ala-Leu-OMe (2) are presented. Peptide 1 adopts a type I-turn conformation with Dpg(2)-Gly(3) at the corner positions. The 14-residue peptide 2 crystallizes with two molecules in the asymmetric unit, both of which adopt -helical conformations stabilized by 11 successive 5 1 hydrogen bonds. In addition, a single 4 1 hydrogen bond is also observed at the N-terminus. All five Dpg residues adopt backbone torsion angles (, ) in the helical region of conformational space. Evaluation of the available structural data on Dpg peptides confirm the correlation between backbone bond angle NCC() and the observed backbone , values. For > 106° , helices are observed, while fully extended structures are characterized by < 106° . The mean values for extended and folded conformations for the Dpg residue are 103.6° ± 1.7° and 109.9° ± 2.6° , respectively.

DMT of Multi-hop Cooperative Networks-Part I: K-Parallel-Path Networks

We consider single-source, single-sink multi-hop relay networks, with slow-fading Rayleigh fading links and single-antenna relay nodes operating under the half-duplex constraint. While two hop relay networks have been studied in great detail in terms of the diversity-multiplexing tradeoff (DMT), few results are available for more general networks. In this two-part paper, we identify two families of networks that are multi-hop generalizations of the two hop network: K-Parallel-Path (KPP) networks and Layered networks. In the first part, we initially consider KPP networks, which can be viewed as the union of K node-disjoint parallel paths, each of length > 1. The results are then generalized to KPP(I) networks, which permit interference between paths and to KPP(D) networks, which possess a direct link from source to sink. We characterize the optimal DMT of KPP(D) networks with K >= 4, and KPP(I) networks with K >= 3. Along the way, we derive lower bounds for the DMT of triangular channel matrices, which are useful in DMT computation of various protocols. As a special case, the DMT of two-hop relay network without direct link is obtained. Two key implications of the results in the two-part paper are that the half-duplex constraint does not necessarily entail rate loss by a factor of two, as previously believed and that, simple AF protocols are often sufficient to attain the best possible DMT.

Simulation of Dust Loaded V-I Characteristics of a Commercial Thermal Power Plant Precipitator

A new approach based on finite difference method, is proposed for the simulation of electrical conditions in a dc energized wire-duct electrostatic precipitator with and without dust loading. Simulated voltage-curren characteristics with and without dust loading were compared with the measured characteristics for analyzing the performance of a precipitator. The simple finite difference method gives sufficiently accurate results with reduced mesh size. The results for dust free simulation were validated with published experimental data. Further measurements were conducted at a thermal power plant in India and the results compares well with the measured ones.

Investigations on voltages and currents in the lightning protection system of the Indian satellite launch pad-I during a stroke interception

A reliable protection against direct lightning hit is very essential for satellite launch pads. In view of this, suitable protection systems are generally employed. The evaluation of efficacy of the lightning protection schemes among others requires an accurate knowledge of the consequential potential rise at the struck point and the current injected into soil at the earth termination. The present work has made a detailed effort to deduce these quantities for the lightning protection scheme of the Indian satellite launch pad-I. A reduced scale model of the system with a frequency domain approach is employed for the experimental study. For further validation of the experimental approach, numerical simulations using numerical electromagnetic code-2 are also carried out on schemes involving single tower. The study results on the protection system show that the present design is quite safe with regard to top potential rise. It is shown that by connecting ground wires to the tower, its base current and, hence, the soil potential rise can be reduced. An evaluation of an alternate design philosophy involving insulated mast scheme is also made. The potential rise in that design is quantified and the possibility of a flashover to supporting tower is briefly looked into. The supporting tower is shown to have significant induced currents.