972 resultados para 109-395
Resumo:
Metal hydrazine nitrate complexes of the type M(N2H4)Nn (NO3)2 where M = Mg, n = 2; M = Mn, Fe, Co, Ni, Zn and Cd and n = 3; metal dihydrazine azide complexes of the type M(N2H4)2 (N3)2 where M = Mg, Co, Ni and Zn; and Mg(N2H4)2 (C1O4)2 have been prepared by dissolving the respective metal powders in the solution of corresponding ammonium salts (NO3, N3 and C1O4) in hydrazine hydrate. These hydrazine complexes were also prepared by the conventional method involving the addition of alcoholic hydrazine hydrate to the aqueous solution of metal salts. The hydrazine complexes have been characterised by chemical analysis, infrared spectra and differential thermal analysis (DTA). Impact sensitivities of hydrazine complexes were determined by the drop weight method. The reactivity of these hydrazine complexes does not change with the method of preparation.
Resumo:
Rate constants for the quenching of singlet oxygen by a series of thioketones were measured by monitoring the inhibition of the self-sensitized photooxidation of rubrene. A correlation of the quenching rate with the nature of the substituents on the aromatic rings for the diarylthioketones and arylalkylthioketones was found, whereas correlation with the n orbital ionization potential was observed for the dialkylthioketones.
Resumo:
C6H11o9P2-.Ba2+.7H2o, M, = 521.5, is monoclinic, space group P21, a = 11.881 (4), b = 8.616 (5), c = 8.350 (4) A,B = 102.95 (3)0, Z = 2, U = 833.0 A 3, d m = 2.09, d c = 2.08 Mg m -3, F(000) = 516. Mo Ka (u = 0.034 mm -1) intensity data. R is 0.068 for 1603 reflections. Of the two endocyclic C-O bonds in the glucose ring, C(5)-O(5) [1.463 (23)] is longer than C(1)-O(5) [1.395 (23)A]. The pyranose sugar ring takes a 4C1 chair conformation. The Cremer-Pople puckering parameters are, 0 = 6.69 o, Q = 0.619 A and 0 = 263.7o. The conformation about the exocyclic C(5)-C(6) bond is gauche-gauche, in contrast to gauche-trans observed in the structure of glucose 1-phosphate. The phosphate ester bond, P-O(6), is 1.61 (1)A. It is similar in length to the 'high-energy' P~O bond in phosphoenolpyruvate. The Ba 2÷ ion is surrounded by nine O atoms within a distance of 2.95 A, of which seven are from water molecules. There is an intramolecular hydrogen bond between the sugar hydroxyl 0(4) and phosphate oxygen O(12).
Resumo:
Masonry under compression is affected by the properties of its constituents and their interfaces. In spite of extensive investigations of the behaviour of masonry under compression, the information in the literature cannot be regarded as comprehensive due to ongoing inventions of new generation products – for example, polymer modified thin layer mortared masonry and drystack masonry. As comprehensive experimental studies are very expensive, an analytical model inspired by damage mechanics is developed and applied to the prediction of the compressive behaviour of masonry in this paper. The model incorporates a parabolic progressively softening stress-strain curve for the units and a progressively stiffening stress-strain curve until a threshold strain for the combined mortar and the unit-mortar interfaces is reached. The model simulates the mutual constraints imposed by each of these constituents through their respective tensile and compressive behaviour and volumetric changes. The advantage of the model is that it requires only the properties of the constituents and considers masonry as a continuum and computes the average properties of the composite masonry prisms/wallettes; it does not require discretisation of prism or wallette similar to the finite element methods. The capability of the model in capturing the phenomenological behaviour of masonry with appropriate elastic response, stiffness degradation and post peak softening is presented through numerical examples. The fitting of the experimental data to the model parameters is demonstrated through calibration of some selected test data on units and mortar from the literature; the calibrated model is shown to predict the responses of the experimentally determined masonry built using the corresponding units and mortar quite well. Through a series of sensitivity studies, the model is also shown to predict the masonry strength appropriately for changes to the properties of the units and mortar, the mortar joint thickness and the ratio of the height of unit to mortar joint thickness. The unit strength is shown to affect the masonry strength significantly. Although the mortar strength has only a marginal effect, reduction in mortar joint thickness is shown to have a profound effect on the masonry strength. The results obtained from the model are compared with the various provisions in the Australian Masonry Structures Standard AS3700 (2011) and Eurocode 6.
Resumo:
C llH22 N 30 + . C2H302, orthorhombic, P2~2~2~, a = 5.511(2), b = 14.588(4), c = 21.109 (4)A, Z = 4. The structure has been solved using MULTAN and refined to R = 0.079 for 993 observed reflections. The fully extended lysine side chain in the molecule is staggered between the main-chain amino and carbonyl groups. The dipeptide molecules in the crystal structure are arranged in twofold helices centred on 21 screw axes. These helices are interconnected through interactions involving the acetate and the side-chain amino groups. Each acetate group bridges two adjacent side-chain amino groups, related by an a translation, giving rise to an infinitely long chain of alternating negatively charged carboxylate and positively charged amino groups.
Resumo:
Background Despite decades of research, bullying in all its forms is still a significant problem within schools in Australia, as it is internationally. Anti-bullying policies and guidelines are thought to be one strategy as part of a whole school approach to reduce bullying. However, although Australian schools are required to have these policies, their effectiveness is not clear. As policies and guidelines about bullying and cyberbullying are developed within education departments, this paper explores the perspectives of those who are involved in their construction. Purpose This study examined the perspectives of professionals involved in policy construction, across three different Australian states. The aim was to determine how their relative jurisdictions define bullying and cyberbullying, the processes for developing policy, the bullying prevention and intervention recommendations given to schools and the content considered essential in current policies. Sample Eleven key stakeholders from three Australian states with similar education systems were invited to participate. The sample selection criteria included professionals with experience and training in education, cyber-safety and the responsibility to contribute to or make decisions which inform policy in this area for schools in their state. Design and methods Participants were interviewed about the definitions of bullying they used in their state policy frameworks; the extent to which cyberbullying was included; and the content they considered essential for schools to include in anti-bullying policies. Data were collected through in-depth, semi-structured interviews and analysed thematically. Findings Seven themes were identified in the data: - (1) Definition of bullying and cyberbullying; - (2) Existence of a policy template; - (3) Policy location; - (4) Adding cyberbullying; - (5) Distinguishing between bullying and cyberbullying; - (6) Effective policy, and; - (7) Policy as a prevention or intervention tool. The results were similar both across state boundaries and also across different disciplines. Conclusion Analysis of the data suggested that, across the themes, there was some lack of information about bullying and cyberbullying. This limitation could affect the subsequent development, dissemination and sustainability of school anti-bullying policies, which have implications for the translation of research to inform better student outcomes.
Resumo:
Contains Deed of Trust, By-Laws, Annual Reports, Corporation Minutes (1909, 1913-1919, 1923-1924, 1926-1933), Minutes of the Board of Trustees (1893, 1899, 1907, 1910, 1915-1916, 1918, 1923, 1926-1927, 1930-1933), and the minutes, correspondence, and reports of the various national and local committees. Financial materials include income and expenditure records (1891-1933), audits (1919-1923, 1926-1928), the records of agricultural loans and mortgages, bond and real estate holdings, and bequests. Includes also correspondence and other materials regarding the establishment of the Fund, correspondence of and other papers concerning the Baron and Baroness de Hirsch, and several histories of the Fund. Included in the wide range of activities are material on the work of the Agriculture Bureau and the Jewish Agriculture Society, Housing, English Classes, Immigration (including monthly reports for several ports of entry 1885-1916) and Immigrant Aid, German Refugee Aid in the early years of the Holocaust, Kings Park, N.Y. Test Farm, the Laundry Project, Peekskill Farm, Public Baths, Student Loans, the Baron de Hirsch Trade School, and the Woodbine Colony and Baron De Hirsch Agricultural & Industrial School. Contains also materials on the Colonization attempts made in Colorado, Connecticut, Florida, Louisiana, Michigan, Minnesota, North Dakota, New Jersey, New York, Pennsylvania, South Dakota, Galveston, Texas, The Southwest, Washington, Canada, and Mexico.
Resumo:
Breaches of biosecurity, leading to incursions by invasive species, have the potential to cause substantial economic, social and environmental losses, including drastic reduction in biodiversity. It is argued that improving biosecurity reduces risk to biodiversity, while maintaining stable ecosystems through biodiversity can be a safeguard against biosecurity breaches. The global costs of invasive alien species (IAS) have been estimated at around US$350 billion, while alien invertebrate and vertebrate pests and weeds are estimated to cost Australia at least $7 billion a year. A striking, current, example is the incursion by Myrtle Rust (Puccinia psidii) an organism which can infect all members of the Myrtaceae, the most important family in the Australian flora. Myrtle rust was first detected on a property on the central coast of New South Wales in late April 2010. Two years later the disease has been detected in numerous locations in Queensland and New South Wales ranging from commercial plant nurseries and public amenities to large areas of bushland. This particular breach of biosecurity will, inevitably, diminish biodiversity of flora and fauna over large areas of the continent. Integrated pest management (IPM), an enrichment of diversity in managing invasive and other pest species, offers the best opportunity to address problems such as these. Australia's response to increasing biosecurity risk is comprehensive and includes national networking of scientists engaged in a complex program of biosecurity research and development, including studies of IPM. This network is being enhanced by the development of international linkages.
Resumo:
Fundamental to the development of new customer value offerings via web-based commerce is a small firm's ability to strategically acquire and exploit knowledge. The focus of this paper is the empirical testing of a normative web-based commerce adoption model developed from a review of the extant literature related to electronic marketing, the Internet and the diffusion of new innovations. A preliminary test of the model's theoretical contentions lent support to its overall focus, but found that the firm's existing learning capabilities were diminished during the adoption of web-based commerce. Consequently, sub-optimal adoption outcomes were associated with insufficient knowledge development.
Resumo:
Purpose To evaluate if adding clonidine to a standard nerve root block containing local anaesthetic and steroid improved the outcome of patients with severe lumbar nerve root pain secondary to MRI proven lumbar disc prolapse. Methods We undertook a single blind, prospective, randomised controlled trial evaluating 100 consecutive patients with nerve root pain secondary to lumbar disc prolapse undergoing trans-foraminal epidural steroid injection either with or without the addition of clonidine. 50 patients were allocated to each arm of the study. The primary outcome measure was the avoidance of a second procedure- repeat injection or micro-discectomy surgery. Secondary outcome measures were also studied: pain scores for leg and back pain using a visual analogue scale (VAS), the Roland Morris Disability Questionnaire (RMDQ) and the Measure Your Own Medical Outcome Profile (MYMOP). Follow up was carried out at 6 weeks, 6 months and 1 year. Results No serious complications occurred. Of the 50 patients who received the addition of clonidine, 56% were classified as successful injections, with no further intervention required, as opposed to 40% who received the standard injection. This difference did not reach statistical significance (p=0.109, chi-squared test). All secondary measures showed no statistically significant differences between the groups except curiously, the standard group who had been classified as successful had better leg pain relief than the clonidine group (p=0.026) at 1 year. Conclusions This pilot study has shown a 16% treatment effect with adding clonidine to lumbar nerve root blocks and that it is a safe injectate for this purpose.
Resumo:
Photodimerization of acenaphthylene and 5,6-dichloroacenaphthylene solubilized in sodium dodecylsulphate (SDS), cetyltrimethylammonium chloride (CTAC), dodecyltrimethylammonium chloride (DTAC), cetyltrimethylammonium bromide (CTAB) and Triton X-100 micelles gives a mixture of cis and trans dimers. The magnitude of the cis:trans ratio is sensitive to the type of micelle used. In CTAB micelles the heavy atom effect of the bromide counter-ions leads to an increased triplet-derived trans dimer yield, whereas in micelles with light atom counter-ions (CTAC, DTAC and SDS) the singlet-derived cis dimer predominates.
Resumo:
Mr=328.32, triclinic, P1, a=5.801 (1), b=7.977(1), c=9.110(2)A, ~t=102.33 (1), fl= 97.92 (1), y= 109.82 (1) °, v= 377.2 (1) A 3 at 293 K, Z=I, D x=1.45, D m=1.45 g cm -3, 2(MoKs)= 0.7107 A, ~ = 0.74 cm -1, F(000) = 174.0. R = 0.046 for 990 unique observed [F o > 4O(Fo)] reflections. The crystal structure is stabilized by extensive hydrogen bonding involving all N and O atoms.
Resumo:
This paper investigates the short-run effects of economic growth on carbon dioxide emissions from the combustion of fossil fuels and the manufacture of cement for 189 countries over the period 1961-2010. Contrary to what has previously been reported, we conclude that there is no strong evidence that the emissions-income elasticity is larger during individual years of economic expansion as compared to recession. Significant evidence of asymmetry emerges when effects over longer periods are considered. We find that economic growth tends to increase emissions not only in the same year, but also in subsequent years. Delayed effects - especially noticeable in the road transport sector - mean that emissions tend to grow more quickly after booms and more slowly after recessions. Emissions are more sensitive to fluctuations in industrial value added than agricultural value added, with services being an intermediate case. On the expenditure side, growth in consumption and growth in investment have similar implications for national emissions. External shocks have a relatively large emissions impact, and the short-run emissions-income elasticity does not appear to decline as incomes increase. Economic growth and emissions have been more tightly linked in fossil-fuel rich countries.
Resumo:
Vibrational stability of a large flexible, structurally damped spacecraft subject to large rigid body rotations is analysed modelling the system as an elastic continuum. Using solution of rigid body attitude motion under torque free conditions and modal analysis, the vibrational equations are reduced to ordinary differential equations with time-varying coefficients. Stability analysis is carried out using Floquet theory and Sonin-Polya theorem. The cases of spinning and non-spinning spacecraft idealized as a flexible beam plate undergoing simple structural vibration are analysed in detail. The critical damping required for stabilization is shown to be a function of the spacecraft's inertia ratio and the level of disturbance.
Resumo:
The thesis consists of five international congress papers and a summary with an introduction. The overarching aim of the studies and the summary is to examine the inner coherency of the theological and anthropological thinking of Gregory of Nyssa (331-395). To the issue is applied an "apophatic approach" with a "Christological focus". It is suggested that the coherency is to be found from the Christological concept of unity between "true God" and "true man" in the one person of Jesus Christ. Gregory is among the first to make a full recognition of two natures of Christ, and to use this recognition systematically in his writings. The aim of the studies is pursued by the method of "identification", a combination of the modern critical "problematic method" and Gregory's own aphairetic method of "following" (akolouthia). The preoccupation with issues relating to the so-called Hellenization of Christianity in the patristic era was strong in the twentieth-century Gregory scholarship. The most discussed questions have been the Greek influence in his thought and his philosophical sources. In the five articles of the thesis it is examined how Gregory's thinking stands in its own right. The manifestly apophatic character of his theological thinking is made a part of the method of examining his thought according to the principles of his own method of following. The basic issue concerning the relation of theology and anthropology is discussed in the contexts of his central Trinitarian, anhtropological, Christological and eschatological sources. In the summary the Christocentric integration of Gregory's thinking is discussed also in relation to the issue of the alledged Hellenization. The main conclusion of the thesis concerns the concept of theology in Gregory. It is not indebted to the classical concept of theology as metaphysics or human speculation of God. Instead, it is founded to the traditional Judeo-Christian idea of God who speaks with his people face to face. In Gregory, theologia connotes the oikonomia of God's self-revelation. It may be regarded as the state of constant expression of love between the Creator and his created image. In theology, the human person becomes an image of the Word by which the Father expresses his love to "man" whom he loves as his own Son. Eventually the whole humankind, as one, gives the divine Word a physical - audible and sensible - Body. Humankind then becomes what theology is. The whole humanity expresses divine love by manifesting Christ in words and deeds, singing in one voice to the glory of the Father, the Son and the Holy Spirit.