Enzyme loading dependence of cellulose hydrolysis of sugarcane bagasse

The enzymatic hydrolysis of steam-pretreated sugarcane bagasse, either delignified or non-delignified, was studied as a function of enzyme loading. Hydrolysis experiments were carried out using five enzyme loadings (2.5 to 20 FPU/g cellulose) and the concentration of solids was 2% for both materials. Alkaline delignification improved cellulose hydrolysis by increasing surface area. For both materials, glucose concentrations increased with enzyme loading. On the other hand, enzyme loadings higher than 15 FPU/g did not result in any increase in the initial rate, since the excess of enzyme adsorbed onto the substrate restricted the diffusion process through the structure.

METHANE DRY REFORMING OVER Ni SUPPORTED ON PINE SAWDUST ACTIVATED CARBON: EFFECTS OF SUPPORT SURFACE PROPERTIES AND METAL LOADING

The influence of metal loading and support surface functional groups (SFG) on methane dry reforming (MDR) over Ni catalysts supported on pine-sawdust derived activated carbon were studied. Using pine sawdust as the catalyst support precursor, the smallest variety and lowest concentration of SFG led to best Ni dispersion and highest catalytic activity, which increased with Ni loading up to 3 Ni atoms nm-2. At higher Ni loading, the formation of large metal aggregates was observed, consistent with a lower "apparen" surface area and a decrease in catalytic activity. The H2/CO ratio rose with increasing reaction temperature, indicating that increasingly important side reactions were taking place in addition to MDR.

Keskitetyn lämmöntuotannon kehittämismahdollisuudet Lahden seudulla ilmastonmuutoksen näkökulmasta

Tämä diplomityö on tehty Aalto yliopiston Teknillisen korkeakoulun Lahden keskuksen IMMU-hankkeeseen. Teoriaosassa tarkastellaan kaukolämmityksen nykytilannetta ja sen tulevai-suuteen vaikuttavia tekijöitä. Työssä on tarkasteltu Lahti Energia Oy:n Kymijärven voimalaitosalueen kehittämismahdollisuuksia vuosina 2012 ja 2016. Vertailukohtana käytetään nykytilannetta vuoden 2009 tiedoilla. Työssä on selvitetty voimalaitosalueen elinkaaren aikaisia kasvihuonekaasupäästöjä ja niiden muutoksia mahdollisten uusien voimalaitosinvestointien myötä. Vuonna 2012 alueelle rakennetaan kiinteää polttoainetta käyttävä kaasutusvoimalaitos jolloin nykyisen laitoksen käyttö ja samalla kivihiilen käyttö vähenee huomattavasti. Tässä työssä vuoden 2016 skenaariossa alueelle ajatellaan rakennettavan kolmas voimalaitos, maakaasukäyttöinen kaasukombiturbiini. Tarkasteluissa energiantuotantomäärien oletetaan pysyvän nykytilanteen suuruisina. Työssä tarkasteltujen skenaarioiden perusteella alueen yhdistetyn kaukolämmön- ja sähköntuotannon (CHP) päästöjä voitaisiin vähentää vuonna 2012 noin 20 % ja vuonna 2016 noin 30 % nykytilanteesta. Esitettyjen investointien riskinä on sopivan polttoaineen saatavuus ja riittävyys. Lisäksi työssä tarkasteltiin kaasutusvoimalaitoksen ja kaasukombiturbiinin takaisinmaksuaikoja. Kierrätyspolttoaineen hinnan kallistuminen hinnasta 5 €/MWh hintaan 15 €/MWh vaikutti kaasutusvoimalaitoksen takaisinmaksuaikaan yhdeksällä vuodella. Kaasukombiturbiinin takaisinmaksuaika piteni tämän hetkiseen maakaasun hintaan 27 €/MWh verrattuna päästöoikeuden lisäkustannus 6 €/MWh huomioiden kahdeksan vuotta. Takaisinmaksuaikaan vaikuttaa muun muassa polttoaineen hinta ja laitoksen huipunkäyttöaika.

Kenttätietojen hyödyntäminen taajuusmuuttajan luotettavuuden suunnittelussa

Taajuusmuuttaja on yhä yleisempi laite perinteisten oikosulkumoottoreiden nopeuden säädössä, niin teollisuudessa kuin muilla käyttökohteissa. Ensimmäiset laitetyypit olivat mekaanisesti suurikokoisia ja vaativat laitteen tekniseltä tuelta ja kunnossapidolta hyvää teknistä perehtyneisyyttä laitteisiin. Teknologian kehittymisen myötä laitteiden teho/kokosuhde on pienentynyt ja tarjolla on useita eri sovelluskohteisiin suoraan soveltuvia taajuusmuuttajia varustettuna helppokäyttöisillä ja kaupallisilla käyttöliittymillä. Laitteen elinkaaren aikainen luotettavuusjohtaminen edellyttää valmistajalta varsinaisen laitesuunnittelun lisäksi tarkoituksenmukaisia testausmenetelmiä ja kokemusperäistä luotettavuustietoa myös asennetusta laitekannasta. Työssä on käyty taajuusmuuttajan suunnittelun kannalta läpi luotettavuuden käsitteistö sekä yleisimpiä luotettavuusmenetelmiä. Luotettavuusnäkökohtia verrataan asennetusta laitekannasta saatuihin kokemuksiin laitteen valmistajan ja tuotetuen kannalta. Työssä on esitetty luokittelun perusteita ja menetelmät, miten käytön aikana voidaan arvioida laitteen teknistä tilaa sekä huomioida se kunnossapidon suunnittelussa. Johtopäätöksenä huomataan, että asennuspaikka ja käyttösovellus määrittävät taajuusmuuttajan käytettävyyden. Kenttätietoja voidaan hyödyntää paikallisen kunnossapidon kannalta kunnossapidon ja investointien suunnittelussa. Toisaalta valmistajan tuotekehitys saa asennetuista laitteista kokemuksia seuraavan sukupolven tyypin suunnittelun perustaksi. Tekniikan voimakkaan kehittymisen seurauksena uusien taajuusmuuttajatyyppien valmistus kestää yhä lyhyemmän ajanjakson, jolloin asennetusta laitekannasta saatu kenttäkokemus on arvokasta tietoa laitevalmistajalle. Yhteenvetona valmistajan laiterekistereitä voidaan kehittää siten, että niihin on tallennettavissa laitekartoitusten perusteella kerättyä informaatiota, jota niin valmistajan myynti, tuotetuki kuin laitesuunnittelu voi omassa toiminnassaan hyödyntää.

Role of oxidation-reduction cycle of iron in direct leaching of zinc concentrate

Direct leaching is an alternative to conventional roast-leach-electrowin (RLE) zinc production method. The basic reaction of direct leach method is the oxidation of sphalerite concentrate in acidic liquid by ferric iron. The reaction mechanism and kinetics, mass transfer and current modifications of zinc concentrate direct leaching process are considered. Particular attention is paid to the oxidation-reduction cycle of iron and its role in direct leaching of zinc concentrate, since it can be one of the limiting factors of the leaching process under certain conditions. The oxidation-reduction cycle of iron was experimentally studied with goal of gaining new knowledge for developing the direct leaching of zinc concentrate. In order to obtain this aim, ferrous iron oxidation experiments were carried out. Affect of such parameters as temperature, pressure, sulfuric acid concentration, ferrous iron and copper concentrations was studied. Based on the experimental results, mathematical model of the ferrous iron oxidation rate was developed. According to results obtained during the study, the reaction rate orders for ferrous iron concentration, oxygen concentration and copper concentration are 0.777, 0.652 and 0.0951 respectively. Values predicted by model were in good concordance with the experimental results. The reliability of estimated parameters was evaluated by MCMC analysis which showed good parameters reliability.

A study of combustion phenomena in circulating fluidized beds by developing and applying experimental and modelling methods for laboratory-scale reactors

The results shown in this thesis are based on selected publications of the 2000s decade. The work was carried out in several national and EC funded public research projects and in close cooperation with industrial partners. The main objective of the thesis was to study and quantify the most important phenomena of circulating fluidized bed combustors by developing and applying proper experimental and modelling methods using laboratory scale equipments. An understanding of the phenomena plays an essential role in the development of combustion and emission performance, and the availability and controls of CFB boilers. Experimental procedures to study fuel combustion behaviour under CFB conditions are presented in the thesis. Steady state and dynamic measurements under well controlled conditions were carried out to produce the data needed for the development of high efficiency, utility scale CFB technology. The importance of combustion control and furnace dynamics is emphasized when CFB boilers are scaled up with a once through steam cycle. Qualitative information on fuel combustion characteristics was obtained directly by comparing flue gas oxygen responses during the impulse change experiments with fuel feed. A one-dimensional, time dependent model was developed to analyse the measurement data Emission formation was studied combined with fuel combustion behaviour. Correlations were developed for NO, N2O, CO and char loading, as a function of temperature and oxygen concentration in the bed area. An online method to characterize char loading under CFB conditions was developed and validated with the pilot scale CFB tests. Finally, a new method to control air and fuel feeds in CFB combustion was introduced. The method is based on models and an analysis of the fluctuation of the flue gas oxygen concentration. The effect of high oxygen concentrations on fuel combustion behaviour was also studied to evaluate the potential of CFB boilers to apply oxygenfiring technology to CCS. In future studies, it will be necessary to go through the whole scale up chain from laboratory phenomena devices through pilot scale test rigs to large scale, commercial boilers in order to validate the applicability and scalability of the, results. This thesis shows the chain between the laboratory scale phenomena test rig (bench scale) and the CFB process test rig (pilot). CFB technology has been scaled up successfully from an industrial scale to a utility scale during the last decade. The work shown in the thesis, for its part, has supported the development by producing new detailed information on combustion under CFB conditions.

The Process of Greening Cycle as Method of Operative Environmental

The structural change of society from product-based business to service- and further to need-based business has caused the fact that work for environmental issues has spread from conventional factories and environmentally harmful production to concern services and offices as well. Almost every company has an office, so a relatively small environmental burden caused by an individual office grows remarkable already at the state level and globally even more. Motivation to work for environmental issues in an individual office could be challenging even without the fact that wasted environmental impacts bound also wasted costs. Besides cost savings, a concretely greener image of a company has its value in the B2Cas well as in the B2B-field. Consumers and clients are more and more conscious of environmental issues and demand concrete actions instead of speeches, good thoughts and meaningless certifications. Internal work for environmental issues at a strategy level is not sufficient, so operational environmental management is needed for changing old practices. This research is about the effects of operative environmental management on the greening process of an office-based business. The research is outlined to concern the operative work in the office including field sales. Target was to concretely lower the environmental impacts of Lyreco Finland and to find cost savings directly by changing the operative practices in the office and also indirectly by affecting the level of environmental knowledge of the personnel. During the greening process, the aim was also to create concrete arguments for marketing as well. The circle of greening process, which was especially created for this diploma work, was used as a method. The circle divides a year to themes and sections separated by factors of environmental impacts. Separation is based on Brett Wills’ thoughts of seven green wastes (Wills, Brett. The Green Intensions. 2009) and follows it uneasily. The circle aimed at ensuring evolutionary growth of knowledge instead of being revolutionary in the changing process. Committing personnel to the process from its start by asking ideas from them and giving them clear directions was an important part of the research of operative management. Because of working from distance, communication with personnel was operated by frequent training days and weekly greening notes via emails and intranet. Also availability for communication was an important task because of the telecommuting. Research results of this work show that operative environmental management in an officebased business today is mostly management of change. When the strategic environmental friendliness is taken into a concrete level, the most important individual factor is motivating the operating personnel. Research shows that evolutionary change is found being an efficient way to make a change. Also understanding one´s own impact on the environmental burden and on the whole greening process clearly motivates the personnel. Results show that in the operative realization of the greening process, clear directions of new working practices, being as concrete as possible, and committing personnel to follow them make the process more effective. The operative environmental management and the cycle of the greening process decrease the environmental burden and save costs. The concrete results could be used as believable arguments in marketing and therefore exploited in communication with interest groups. Commitment of the management is also one of the key factors of success in the greening process. In this research, changes in the business field by a company trade took the focus of the management away from the greening process and made the process more inefficient by decreasing the amount of training days. The circle of greening process will be used as a tool in the future, as well, and therefore it will help observe environmental impacts of a company and increase sustainable development. Commitment of management to the evolutionary environmental work helps the operating personnel lower environmental impacts, decrease costs and build a concretely greener image.

Mobiilitehdaskonseptin soveltaminen puutalotuotantoon

Tullit ja kuljetuskustannukset haittaavat suomalaisten puutuotteiden hintakilpailua Venäjällä, mikä on luonut tarpeen uudenlaisten toimintamallien kehittämiselle. Tutkimuksen hypoteesina on, että soveltamalla teorioita mobiilista tuotantojärjestelmästä puutalotuotantoon pystytään vastaamaan aluerakennustoiminnan ongelmiin ja saavuttamaan kustannusetuja. Tämän työn tavoitteena on antaa yritysjohdolle kuvaus siirrettävän talotehtaan tuotantokonseptista ja arvioida toiminnan kannattavuutta. Työn tulosten avulla pyritään vastaamaan kysymyksiin: millainen on siirrettävä puutalotehdas ja onko mobiilitehdaskonsepti puutalotuotannossa taloudellisesti kannattava. Tutkimusta tarkastellaan Venäjän liiketoiminta- ja Venäjän puurakentamiskontekstissa. Tutkimus on laadullinen tapaustutkimus, jossa käytettiin useiden menetelmien yhdistelmää. Tutkimusmenetelmät sisälsivät sekä teknisen suunnittelun että kannattavuuden arvioinnin menetelmiä. Työn tekninen osa perustui tehdassuunnittelun ja konseptin kehittämisen menetelmiin. Taloudellisessa tarkastelussa käytettiin tuloslaskelmaa sekä tuottoasteen ja takaisinmaksuajan menetelmiä. Eri tekijöiden vaikutusta kannattavuuteen arvioitiin herkkyysanalyysilla. Työssä esitellään mobiilin talotehtaan tehdassuunnitelma ja tuotantokonsepti sekä sivutaan logistista konseptia. Mobiiliin talotehtaaseen sovellettiin mobiilitehdaskonseptia ja verstastuotantomallia. Mobiili talotehdas koostuu kokoonpanolinjasta, jota täydennetään esivalmistusverstailla. Investoinnille laskettiin kannattavuutta kuvaavat tunnusluvut, joiden perusteella mobiilitehdas todettiin kannattamattomaksi ja riskialttiiksi. Kannattavuuden epävarmuutta analysoitiin herkkyysanalyysillä. Kannattavuuteen vaikuttavat merkittävästi muuttuvien kustannusten ja myyntihinnan muutokset. Työssä annetaan toimenpide-ehdotuksia siirrettävän talotuotannon konseptin kehittämiseen. Keskeiset jatkotutkimuskohteet liittyvät mobiilitehtaan elinkierron toimintojen ja osakonseptien kehittämiseen.

Customer relationship management through life cycle analysis, case professional service firm in B2B market

The objective of this master’s thesis was to study how customer relationships should be assessed and categorized in order to support customer relationship management (CRM) in the context of business-to-business (B2B) and professional services. This sophisticated and complex market is utilizing possibilities of CRM only rarely and even then the focus is often on technology. The theoretical part considered first CRM from the value chain point of view and then discussed the cyclical nature of relationships. The case study focused on B2B professional service firm. The data was collected from company databases and included the sample of 90 customers. The research was conducted in three phases first studying the age, then the service type of relationships and finally executing the cluster analysis. The data was analysed by statistical analysis program SAS Enterprise Guide. The results indicate that there are great differences between developments of customer relationships. While some relationships are dynamically growing and changing, most of customers are remaining constant. This implies expectations and requirements of customers are similarly divergent and relationships should be managed accordingly.

Patenttien vaikutus suomalaisten pörssiyritysten markkina-arvoon - reaalioptiosovellutus

Tutkielman tavoitteena oli tutkia onko patenteilla positiivinen vaikutus yrityksen markkina-arvoon. Aihetta tutkittiin reaalioptionäkökulmasta: miten patentit voidaan nähdä reaalioptioiden ilmentymänä ja millainen vaikutus niillä on yrityksen suoriutumiseen. Lisäksi tutkittiin onko patenttien vaikutuksessa toimialakohtaisia eroja. Tavoitteena oli myös selvittää onko patenttien vaikutus erilainen talouden eri suhdanteissa. Empiriana tutkimuksessa olivat suomalaiset pörssiyritykset ja niiden Suomeen myönnetyt patentit. Tutkittavana ajanjaksona oli 2001–2010. Tutkimusongelmista johdettuja hypoteeseja testattiin regressioanalyysien avulla. Selitettävänä muuttujana oli yrityksen Tobin’s q ja selittävänä muuttujana yrityksen voimassa olleiden patenttien ja tasearvon suhdeluku. Kontrollimuuttujina käytettiin vuotta ja toimialaa. Tulokseksi saatiin, että patenteilla on ollut positiivinen vaikutus suomalaisten pörssiyritysten markkina-arvoon 2000-luvulla. Varsinkin teknologian ja perusmateriaalien toimialoilla yhteys oli vahvempi kuin muilla toimialoilla. Saadut tulokset ovat yhdenmukaisia aiempien tutkimusten kanssa. Aineiston erityispiirteet toivat tutkimukseen omat haasteensa, jotka vaikuttivat muun muassa toimialaryhmien muodostamiseen sekä makroekonomisen ympäristön merkityksen tutkimiseen.

Non-Markovian Dynamics in Continuous Variable Quantum Systems

The present manuscript represents the completion of a research path carried forward during my doctoral studies in the University of Turku. It contains information regarding my scientific contribution to the field of open quantum systems, accomplished in collaboration with other scientists. The main subject investigated in the thesis is the non-Markovian dynamics of open quantum systems with focus on continuous variable quantum channels, e.g. quantum Brownian motion models. Non-Markovianity is here interpreted as a manifestation of the existence of a flow of information exchanged by the system and environment during the dynamical evolution. While in Markovian systems the flow is unidirectional, i.e. from the system to the environment, in non-Markovian systems there are time windows in which the flow is reversed and the quantum state of the system may regain coherence and correlations previously lost. Signatures of a non-Markovian behavior have been studied in connection with the dynamics of quantum correlations like entanglement or quantum discord. Moreover, in the attempt to recognisee non-Markovianity as a resource for quantum technologies, it is proposed, for the first time, to consider its effects in practical quantum key distribution protocols. It has been proven that security of coherent state protocols can be enhanced using non-Markovian properties of the transmission channels. The thesis is divided in two parts: in the first part I introduce the reader to the world of continuous variable open quantum systems and non-Markovian dynamics. The second part instead consists of a collection of five publications inherent to the topic.

Spatio-temporal modelling of the duration of the cotton cycle in the State Of Goiás, Brazil

The objective of this work was to develop and validate a mathematical model to estimate the duration of cotton (Gossypium hirsutum L. r. latifolium hutch) cycle in the State of Goiás, Brazil, by applying the method of growing degree-days (GD), and considering, simultaneously, its time-space variation. The model was developed as a linear combination of elevation, latitude, longitude, and Fourier series of time variation. The model parameters were adjusted by using multiple-linear regression to the observed GD accumulated with air temperature in the range of 15°C to 40°C. The minimum and maximum temperature records used to calculate the GD were obtained from 21 meteorological stations, considering data varying from 8 to 20 years of observation. The coefficient of determination, resulting from the comparison between the estimated and calculated GD along the year was 0.84. Model validation was done by comparing estimated and measured crop cycle in the period from cotton germination to the stage when 90 percent of bolls were opened in commercial crop fields. Comparative results showed that the model performed very well, as indicated by the Pearson correlation coefficient of 0.90 and Willmott agreement index of 0.94, resulting in a performance index of 0.85.

Auger-type granular fertylizer distributor: matemathical model and dynamic simulation

The objective of this study was to model mathematically and to simulate the dynamic behavior of an auger-type fertilizer applicator (AFA) in order to use the variable-rate application (VRA) and reduce the coefficient of variation (CV) of the application, proposing an angular speed controller θ' for the motor drive shaft. The input model was θ' and the response was the fertilizer mass flow, due to the construction, density of fertilizer, fill factor and the end position of the auger. The model was used to simulate a control system in open loop, with an electric drive for AFA using an armature voltage (V A) controller. By introducing a sinusoidal excitation signal in V A with amplitude and delay phase optimized and varying θ' during an operation cycle, it is obtained a reduction of 29.8% in the CV (constant V A) to 11.4%. The development of the mathematical model was a first step towards the introduction of electric drive systems and closed loop control for the implementation of AFA with low CV in VRA.

Modeling and simulation of forced-air cooling of strawberries using variable convective coefficient

In the forced-air cooling process of fruits occurs, besides the convective heat transfer, the mass transfer by evaporation. The energy need in the evaporation is taken from fruit that has its temperature lowered. In this study it has been proposed the use of empirical correlations for calculating the convective heat transfer coefficient as a function of surface temperature of the strawberry during the cooling process. The aim of this variation of the convective coefficient is to compensate the effect of evaporation in the heat transfer process. Linear and exponential correlations are tested, both with two adjustable parameters. The simulations are performed using experimental conditions reported in the literature for the cooling of strawberries. The results confirm the suitability of the proposed methodology.

Swine effluent treatment using anaerobic digestion at different loading rates

The industrial swine production is characterized by generation of significant effluent amounts that require treatment. The most adopted practices by Brazilian swine farmers have been wastewater storage in lagoons and its subsequent use as a biofertilizer. Nutrient accumulation in soil and water creates the need for an effective management of these residues. The anaerobic digestion process is an important alternative and low-cost treatment for organic matter reduction. However, its efficiency is limited by the digester capacity of solid degradation, especially at low hydraulic retention times. Thus, the present study aimed to verify the behavior of an upflow anaerobic digester by increasing the organic loading rate. This was accomplished in three stages using, as a parameter, volatile solids at 0.5; 1.0 and 1.5 kgVS m-3 d-1, respectively. This digester model proved to be quite robust and effective in swine manure treatment, achieving high efficiency of volatile solid removal at all stages of the study (stage 1: 61.38%; stage 2: 55.18%; and stage 3: 43.18%). Biogas production was directly related to the increasing organic load, reaching 0.14, 0.85, and 0.86 Nm³ kgVS-1add., respectively, with no significant difference (p<0.05) of biogas methane concentration among the studied stages (73.7, 75.0, and 77.9%).