Validação do método de determinação simultânea dos íons brometo e bromato por cromatografia iônica em águas de consumo humano

European Directive (98/83/CE), compulsory after 2008, states that bromate in drinking water must be controlled at levels below 10 mg L-1. Supporting implementation of the Directive, the European Comission has established project SMT4-CT96 2134, in collaboration with various european institutions, aiming at the identification of the interferents to the current analytical method (Ionic Chromatography with Conductimetric Detection - IC/CD), their removal and the automation of pre-treatment and injection steps, as well as the development of alternative methods. EPAL, responsible for the water supply to a great deal of Portuguese regions, has taken steps to meet these requirements. Although not part of such project, this work (the result of a project conducted under a protocol of collaboration between EPAL SA and FCUL - Faculty of Sciences, University of Lisbon), reports on studies of usefulness to laboratories planning to monitor bromate in ozone treated waters, in conditions different from those described in EPA 300.1. Simultaneous determination of bromide is justified by its role as bromate precursor.

The influence of substratum type and nutrient supply on biofilm organic matter utilization in streams

We investigated the effect of benthic substratum type (sand and rocks) and nutrient supply (N and P) on biofilm structure and heterotrophic metabolism in a field experiment in a forested Mediterranean stream (Fuirosos). Rock and sand colonization and biofilm formation was intensively studied for 44 d at two stream reaches: control and experimental (continuous addition of phosphate, ammonia, and nitrate). Structural (C, N, and polysaccharide content and bacterial and chlorophyll density) and metabolic biofilm parameters (b-glucosidase, peptidase, and phosphatase enzyme activities) were analyzed throughout the colonization process. The epilithic biofilm (grown on rocks) had a higher peptidase activity at the impacted reach, together with a higher algal and bacterial biomass. The positive relationship between the peptidase activity per cell and the N content of the epilithic biofilm suggested that heterotrophic utilization of proteinaceous compounds from within the biofilm was occurring. In contrast, nutrient addition caused the epipsammic biofilm (grown on sand) to exhibit lower b-glucosidase and phosphatase activities, without a significant increase in bacterial and algal biomass. The differential response to nutrient addition was related to different structural characteristics within each biofilm. The epipsammic biofilm had a constant and high C:N ratio (22.7) throughout the colonization. The epilithic biofilm had a higher C:N ratio at the beginning of the colonization (43.2) and evolved toward a more complex structure (high polysaccharide content and low C:N ratio) during later stages. The epipsammic biofilm was a site for the accumulation and degradation of organic matter: polysaccharides and organic phosphorus compounds had higher degradation activities

Converter Supply Transformer For LVDC Distribution System

This master’s thesis is focused on optimizing the parameters of a distribution transformer with respect to low voltage direct current (LVDC) distribution system. One of the main parts of low voltage direct current (LVDC) distribution system is transformer. It is studied from several viewpoints like filtering capabilities of harmonics caused by rectifier, losses and short circuit current limiting Determining available short circuit currents is one of the most important aspects of designing power distribution systems. Short circuits and their effects must be considered in selecting electrical equipment, circuit protection and other devices.

Logistisen tiedon hallita toimitusprojektissa

Distributed supply chains, tight delivery times and tailor made products are typical for international project business. This type of environment sets great challenges for logistics management. The scope of this work was to study logistics and information management in delivery projects. The logistic information of delivery project is divided into four categories: The information used to plan, execute and follow up the material flow and the information directly embedded into material flow. On the practical study the operations of the target company are dived into main processes supporting project execution. Logistic information is studied by modelling information flows between the processes. The aim was to identify the information crucial for project materials management and describe the flow of information between the processes. Results of the study show that the information related to execution of material flow is usually emphasized when it comes to operations and tools for data management. The traditional system tools poorly support the planning of material flow in project environment. In addition the significance of clearly defined and documented practices is highlighted.

Invertteripääteasteen suunnittelu

Invertteritekniikalla voidaan toteuttaa nykyaikainen, monipuolinen ja tehokas pääteaste moneen eri käyttötarkoitukseen. Tässä työssä suunnitellaan invertteripääteaste mittalaite- ja virtalähdesovelluksiin. Suunnittelussa otetaan huomioon muunneltavuus, valmistuskustannukset ja mitat. Näiden kriteerien lisäksi pääteaste suunnitellaan niin, että se täyttää mittalaite- ja virtalähdesovelluksien vaatimat standardit. Pääteasteen teho rajoittuu 500 VA:iin, mutta vaatimukset lähtöjännitteen erimuotoisuudelle aiheuttavat suunnittelulle omat vaikeutensa. Työssä täytyy tutkia, minkälainen tuloaste, invertteri, suodin ja lähtöaste sopivat parhaiten pääteasteen toteutukseen. Sopivien topologioiden löydyttyä pääteaste simuloidaan tietokoneella, jonka jälkeen voidaan suunnitella prototyyppi käytännön testauksia varten. Suunnittelussa päädyttiin seuraaviin topologioihin: Tuloasteeksi valittiin PFC-piiri, joka on nykyaikana pakollinen invertterikäytössä, koska verkkoon palaavat harmoniset yliaaltokomponentit täytyy suodattaa. Invertteritopologiaksi valittiin kokosiltainvertteri, jolla saadaan parhaiten muutettua lähtöjännitteen taajuutta ja amplitudia. Suodintopologiaksi valittiin LC-suodin, jolla saadaan tehokkaasti suodatettua invertterin aiheuttamat harmoniset yliaallot. Lähtöön sijoitetaan muuntaja, jonka muuntosuhdetta muuntamalla saadaan lähtöjännite halutuksi eri käyttötarkoituksia varten.

Methods for assessing the sustainability of integrated municipal waste management and

The general striving to bring down the number of municipal landfills and to increase the reuse and recycling of waste-derived materials across the EU supports the debates concerning the feasibility and rationality of waste management systems. Substantial decrease in the volume and mass of landfill-disposed waste flows can be achieved by directing suitable waste fractions to energy recovery. Global fossil energy supplies are becoming more and more valuable and expensive energy sources for the mankind, and efforts to save fossil fuels have been made. Waste-derived fuels offer one potential partial solution to two different problems. First, waste that cannot be feasibly re-used or recycled is utilized in the energy conversion process according to EU’s Waste Hierarchy. Second, fossil fuels can be saved for other purposes than energy, mainly as transport fuels. This thesis presents the principles of assessing the most sustainable system solution for an integrated municipal waste management and energy system. The assessment process includes: · formation of a SISMan (Simple Integrated System Management) model of an integrated system including mass, energy and financial flows, and · formation of a MEFLO (Mass, Energy, Financial, Legislational, Other decisionsupport data) decision matrix according to the selected decision criteria, including essential and optional decision criteria. The methods are described and theoretical examples of the utilization of the methods are presented in the thesis. The assessment process involves the selection of different system alternatives (process alternatives for treatment of different waste fractions) and comparison between the alternatives. The first of the two novelty values of the utilization of the presented methods is the perspective selected for the formation of the SISMan model. Normally waste management and energy systems are operated separately according to the targets and principles set for each system. In the thesis the waste management and energy supply systems are considered as one larger integrated system with one primary target of serving the customers, i.e. citizens, as efficiently as possible in the spirit of sustainable development, including the following requirements: · reasonable overall costs, including waste management costs and energy costs; · minimum environmental burdens caused by the integrated waste management and energy system, taking into account the requirement above; and · social acceptance of the selected waste treatment and energy production methods. The integrated waste management and energy system is described by forming a SISMan model including three different flows of the system: energy, mass and financial flows. By defining the three types of flows for an integrated system, the selected factor results needed in the decision-making process of the selection of waste management treatment processes for different waste fractions can be calculated. The model and its results form a transparent description of the integrated system under discussion. The MEFLO decision matrix has been formed from the results of the SISMan model, combined with additional data, including e.g. environmental restrictions and regional aspects. System alternatives which do not meet the requirements set by legislation can be deleted from the comparisons before any closer numerical considerations. The second novelty value of this thesis is the three-level ranking method for combining the factor results of the MEFLO decision matrix. As a result of the MEFLO decision matrix, a transparent ranking of different system alternatives, including selection of treatment processes for different waste fractions, is achieved. SISMan and MEFLO are methods meant to be utilized in municipal decision-making processes concerning waste management and energy supply as simple, transparent and easyto- understand tools. The methods can be utilized in the assessment of existing systems, and particularly in the planning processes of future regional integrated systems. The principles of SISMan and MEFLO can be utilized also in other environments, where synergies of integrating two (or more) systems can be obtained. The SISMan flow model and the MEFLO decision matrix can be formed with or without any applicable commercial or free-of-charge tool/software. SISMan and MEFLO are not bound to any libraries or data-bases including process information, such as different emission data libraries utilized in life cycle assessments.

Implementation and Integration of New Baggage Logistic Centre at HelsinkiVantaa Airport

This thesis deals with improving international airport baggage supply chain management (SCM) by means of information technology and new baggage handling system. This study aims to focus on supply chain visibility in practice and to suggest different ways to improve the supply chain performance through information sharing. The objective is also to define how radio frequency identification (RFID) and enterprise resource planning (ERP) can make processes more transparent. In order to get full benefits from processes, effective business process management and monitoring as well as the key performance indicators must be defined, implemented and visualized through e.g. dashboard views for different roles. As an outcome of the research the need for the use of information technology systems and more advanced technologies, e.g. RFID in the supply chain management is evident. Sophisticated ERP is crucial in boosting SCM business processes and profitability. This would be beneficial for dynamic decision making as well in the airport and airline supply chain management. In the long term, economic aspects support the actions I have suggested in order to make production more flexible in reacting to quick changes.

Toimitusketjun mallinnuksen tarpeet ja rakenne LOCOMOTIVE projekstissa

Työn tavoitteena oli kuvata ja priorisoida toimitusketjun dynaamisen mallinnustyökalun vaatimukset, sekä muodostaa tämän pohjalta ohjelmistokehitystä tukeva oliomalli. Vaatimuksia selvitettiin teoreettisen tarkastelun, aiemmin toteutettujen kyselytutkimusten sekä viiden pilottitapauksen avulla. Toimitusketjun hallinta ei ole pelkästään materiaalivirtojen vaan myös näihin liittyvän informaation hallintaa. Holististen toimitusketjuongelmien mallintaminen edellyttää siis informaatiovirtojen ja niitä saatelevien ohjausmekanisemien mallintamista. Markkinoilla on selkeästi tilaa tukijärjestelmille, jotka mahdollistaisivat multidimensionaalisten - tuotto, aika, palvelu - toimitusketjuongelmien tarkastelun. Systeemidynamiikan teorian mukaisesti oliomallin lähtökohdaksi valittiin tärkeimpien takaisinkytkentäsilmukkojen mallinnus. Takaisinkytkentäsilmukoiden avulla kyetään mallintamaan kompleksisia systeemejä ajan suhteen. Mallinnetut toimitusketjujen takaisinkytkentäsilmukkat ovat operaatio-, ohjaus-, kysyntä- ja strategiasilmukka. Toimitusketjun ohjausmekanismien, sekä systeemidynamiikan perusteiden pohjalta mallinnustyökalun vaatimuksista muodostettiin oliomalli. Muodostettu oliomalli on Locomotiven - toimitusketjun mallinnustyökalun - perusta.

Change of Electricity Distribution Industry: Drivers and Opening Business Opportunities

As a result of the recent regulatory amendments and other development trends in the electricity distribution business, the sector is currently witnessing radical restructuring that will eventually impact the business logics of the sector. This report represents upcoming changes in the electricity distribution industry and concentrates on the factors that are expected to be the most fundamental ones. Electricity network companies nowadays struggle with legislative and regulatory requirements that focus on both the operational efficiency and the reliability of electricity distribution networks. The forces that have an impact on the distribution network companies can be put into three main categories that define the transformation at a general level. Those are: (1) a requirement for a more functional marketplace for energy, (2) environmental aspects (combating climate change etc.), and (3) a strongly emphasized requirement for the security of energy supply. The first point arises from the legislators’ attempt to increase competition in electricity retail markets, the second one concerns both environmental protection and human safety issues, and the third one indicates societies’ reduced willingness to accept interruptions in electricity supply. In the future, regulation of electricity distribution business may lower the threshold for building more weather-resistant networks, which in turn means increased underground cabling. This development pattern is reinforced by tightening safety and environmental regulations that ultimately make the overhead lines expensive to build and maintain. The changes will require new approaches particularly in network planning, construction, and maintenance. The concept for planning, constructing, and maintaining cable networks is necessary because the interdependencies between network operations are strong, in other words, the nature of the operation requires a linkage to other operations.

Plan de seguridad y salud para el suministro y montaje del Parque Eólico Rancho Viejo en el T.M. de Medina-Sidonia (Cádiz)

No hace más de 3 años se podía leer en las revistas especializadas que España había pasado a ocupar el tercer puesto en el ranking mundial por potencia eólica instalada. La industria eólica española a su vez ha pasado a ocupar el tercer puesto en la fabricación e instalación de aerogeneradores, con una cuota de mercado del 13%, siendo así un sector con gran capacidad de exportación. Por otra parte, tras diez años de promulgación de la Ley 31/95, de 8 de noviembre, de Prevención de Riesgos Laborales, y después su desarrollo reglamentario, es un hecho incontestable que, pese a todo, y a los ingentes esfuerzos realizados por los distintos actores implicados en la prevención de riesgos laborales (Estado, Comunidades Autónomas, Agentes Sociales, Entidades especializadas, etcetera), existe un sector como el de la construcción que, constituyendo uno de los ejes del crecimiento económico de nuestro país, está sometido a unos riesgos especiales y continúa registrando una siniestralidad laboral muy notoria por sus cifras y gravedad. La legislación de prevención, los manuales sobre las distintas disciplinas preventivas, los libros especializados, los expertos... han abordado ya, con mayor o menor acierto, muchas de las cuestiones generales y específicas que afectan a la seguridad y salud: la evaluación de riesgos, las medidas higiénicas, los equipos de trabajo y equipos de protección individual, la planificación, la formación, los servicios de prevención , los sistemas de gestión de la prevención, las auditorías ... forman parte de los contenidos que se han ido creando en torno a este tema. No obstante, resulta de gran interés la elaboración de un estudio de Seguridad y Salud, en el que partiendo de un desarrollo técnico concreto, pero sobre todo integral, es decir, que comprenda todas las fases para el suministrp e instalación de aerogeneradores para un parque eólico, vayamos desgranando cada uno de los puntos desarrollados en su construcción. Entre las conclusiones más destacadas de este trabajo, se encuentra la definición de las condiciones relativas a la prevención de accidentes y enfermedades laborales durante la ejecución de los trabajos de suministro e instalación de un parque eólico y la gestión de su prevención, las características de las instalaciones preceptivas para higiene y bienestar de los trabajadores, así como directrices básicas mínimas, que deben reflejarse y desarrollarse en el Plan de Seguridad y Salud que las empresas contratistas deberán presentar para su aprobación por el director de obra, antes del comienzo de los trabajos, de forma que sea posible la disminución de accidentes laborales así como evitar las posibles sanciones administrativas y/o penales.

Sistemes logístics de codificació i identificació, i perspectives de futur

Comptar amb sistemes sofisticats de gestió o programes ERP (Enterprise Resource Planning) no és suficient per a les organitzacions. Per a què aquests recursos donin resultats adequats i actualitzats, la informació d’entrada ha de llegir-se de forma automàtica, per aconseguir estalviar en recursos, eliminació d’errors i assegurar el compliment de la qualitat. Per aquest motiu és important comptar amb eines i serveis d’identificació automàtica i col•lecció de dades. Els principals objectius a assolir (a partir de la introducció al lector de la importància dels sistemes logístics d’identificació en un entorn global d’alta competitivitat), són conèixer i comprendre el funcionament de les tres principals tecnologies existents al mercat (codis de barres lineals, codis de barres bidimensionals i sistemes RFID), veure en quin estat d’implantació es troba cadascuna i les seves principals aplicacions. Un cop realitzat aquest primer estudi es pretén comparar les tres tecnologies per o poder obtenir perspectives de futur en l’àmbit de l’autoidentificació. A partir de la situació actual i de les necessitats de les empreses, juntament amb el meravellós món que sembla obrir la tecnologia RFID (Radio Frequency Identification), la principal conclusió a la que s’arribarà és que malgrat les limitacions tècniques dels codis de barres lineals, aquests es troben completament integrats a tota la cadena logística gràcies a l’estandarització i la utilització d’un llenguatge comú, sota el nom de simbologies GTIN (Global Trade Item Number), durant tota la cadena de subministres que garanteixen total traçabilitat dels productes gràcies en part a la gestió de les bases de dades i del flux d’informació. La tecnologia RFUD amb l’EPC (Electronic Product Code) supera aquestes limitacions, convertint-se en el màxim candidat per a substituir els limitats codis de barres. Tot i això, RFID, amb l’EPC, no serà un adequat identificador logístic fins que es superin importants barreres, com són la falta d’estandarització i l’elevat cost d’implantació.

Teollisuuden suunnittelupalveluiden hankinta ja valintakriteerit sekä palvelutarjonnan suuntaaminen

Tavoitteena oli selvittää pohjoissuomalaisen teollisuuden suunnittelu- ja konsultointipalvelujen hankintaa ja valintaa ohjaavia kriteereitä. Kriteerien tunteminen antaa palveluntarjoajille paremmat lähtökohdat oman toiminnan ohjaamisessa. Samalla työssä tutkittiin palveluntarjoajien tietämystä asiakkaidensa hankintatoimen taustalla vaikuttavista seikoista. Työn tuloksia voidaan hyödyntää palvelun-tarjoajien, työn tilaajan ja teollisuuden asiakkaiden toiminnassa. Työ aloitettiin tutustumalla asiantuntijapalveluiden markkinoinnin ja hankinnan teoriaan. Teoriassa tutustuttiin myös teknisen suunnittelun- ja konsultoinnin toimi-alaan. Tämän jälkeen haastateltiin kymmenen teollisuuden asiakasyritystä ja viisi palveluntarjoajayritystä. Näiden haastatteluiden perusteella voitiin tarkentaa suunnittelu- ja konsultoinnin erikoispiirteitä ja asiantuntijapalveluiden markkinoinnin ja hankintatoimen teoriaa. Tulosten perusteella asiantuntijapalveluiden hankintatoimi on hyvin organisoitua isoimpien yritysten tai yksiköiden kohdalla. Pienempien yritysten resurssit, vuosittainen tarve ja kokemus ohjaavat hankintatoimintaa. Myös kriteerit ovat yrityksen kokoon nähden muuttuvat. Isommat hankkijat arvostavat henkilöstöä, heidän referenssejään ja osaamistaan. Pienemmät arvostavat edellisten lisäksi vastuunottoa, sitoutumista ja riskienhallintaa. Henkilökohtainen myyntityö nähtiin tärkeänä. Suunnittelutoimistojen tietämys hankintatoimesta ja valintakriteereistä oli vaihtelevaa, mutta pääasiassa keskinkertaista.

Tuote- ja tilaustietojen hallinta tukkukaupan toimitusketjussa

Työn tavoitteena on selvittää, millaisia tuote-ja tilaustietojen hallinnan malleja tukkukaupan toimitusketjussa on käytössä. Kaupan alan tilaus-toimitusketju on hyvin tietointensiivinen prosessi, ja siksi kiinnostava tiedon hallinnan näkökulmasta. Työssä perehdytään kolmen Suomessa toimivan caseyrityksen käytäntöihin päivittäistavara- kaupan, lääketukkukaupan ja sähkötarviketukkukaupan alalta. Toimitusketjun keskipisteenä on tässä työssä tukkukaupan organisaatio. Tiedon välitystä tarkastellaan tukkukaupan organisaation ja sen asiakkaiden välillä (B2B) ja toisaalta tukkukaupan ja sen ensimmäisen tason päämiesten / tavarantoimittajien välillä. Tutkimuksen keskeistä aineistoa ovat henkilökohtaiset haastattelut. Lisäksi tutkimuskysymyksiin etsittiin vastauksia myös alan kirjallisuudesta. Työ antaa yleiskuvaa tukkukaupan organisaatioiden tuote- ja tilaustietojen hallinnan nykytilasta ja kehityskohteista. Työ tarjoaa myös vertailupohjaa tuote- ja tilaustietojen hallinnan kehittämistä suunnitteleville muille organisaatioille. Kaikilla tarkastelluilla toimialoilla tuote- ja tilaustietojen hallintaa ohjaa pyrkimys kustannustehokkaaseen toimintatapaan. Tuotetietojen hallinnassa ensiarvoisen tärkeää on tuotetiedon nopea saatavuus, luotettavuus ja virheettömyys toimialasta riippumatta. Päivittäistavarakaupan tuotetietojen keskitettyä hallintaa voi perustellusti esittää malliksi myös muille kaupan aloille. Yhteistyökumppaneiden suuri määrä ja kasvavat tietovirrat korostavat transaktioiden prosessoinnin merkitystä toimitusketjussa.

Strategic Development of Electricity Distribution Networks – Concept and Methods

Strategic development of distribution networks plays a key role in the asset management in electricity distribution companies. Owing to the capital-intensive nature of the field and longspan operations of companies, the significance of a strategy is emphasised. A well-devised strategy combines awareness of challenges posed by the operating environment and the future targets of the distribution company. Economic regulation, ageing infrastructure, scarcity of resources and tightening supply requirements with challenges created by the climate change put a pressure on the strategy work. On the other hand, technology development related to network automation and underground cabling assists in answering these challenges. This dissertation aims at developing process knowledge and establishing a methodological framework by which key issues related to network development can be addressed. Moreover, the work develops tools by which the effects of changes in the operating environment on the distribution business can be analysed in the strategy work. To this end, the work discusses certain characteristics of the distribution business and describes the strategy process at a principle level. Further, the work defines the subtasks in the strategy process and presents the key elements in the strategy work and long-term network planning. The work delineates the factors having either a direct or indirect effect on strategic planning and development needs in the networks; in particular, outage costs constitute an important part of the economic regulation of the distribution business, reliability being thus a key driver in network planning. The dissertation describes the methodology and tools applied to cost and reliability analyses in the strategy work. The work focuses on determination of the techno-economic feasibility of different network development technologies; these feasibility surveys are linked to the economic regulation model of the distribution business, in particular from the viewpoint of reliability of electricity supply and allowed return. The work introduces the asset management system developed for research purposes and to support the strategy work, the calculation elements of the system and initial data used in the network analysis. The key elements of this asset management system are utilised in the dissertation. Finally, the study addresses the stages of strategic decision-making and compilation of investment strategies. Further, the work illustrates implementation of strategic planning in an actual distribution company environment.

Energia, meio ambiente e economia: o Brasil no contexto mundial

The cycle of fossil fuels as an energy source for mankind is approaching its end. Finite resources, coupled with greenhouse gas, have led to an increased effort in the search for alternative renewable energy sources. Brazil has a leading position, due to a 46% participation of renewable sources in its primary energy supply, compared to the global average of 12%. The expansion of the renewable sources in Brazil depends on medium and long term planning, and a large volume of investments. The present financial crisis will have major effects in the energy market. Despite a negative initial impact, it is expected that the rearrangement of the financial system will ultimately lead to an expansion in the use of renewable energy sources. Brazil is a tropical country, with the largest biodiversity in our planet and excellent conditions to expand the use of all forms of renewable sources.