Cutinase promotes dry esterification of cotton cellulose

Cutinase from Thermobifida fusca was used to esterify the hydroxyl groups of cellulose with the fatty acids from triolein. Cutinase and triolein were pre-adsorbed on cotton and the reaction proceeded in a dry state during 48 hours at 35ºC. The cutinase-catalyzed esterification of the surface of cotton fabric resulted in the linkage of the oleate groups to the glycoside units of cotton cellulose. The superficial modification was confirmed by performing ATR-FTIR on treated cotton samples and by MALDI-TOF analysis of the liquors from the treatment of the esterified cotton with a crude cellulase mixture. Modified cotton fabric also showed a significant increase of hydrophobicity. This work proposes a novel bio-based approach to obtain hydrophobic cotton. This article is protected by copyright. All rights reserved.

Antibiofilm strategies in the food industry

Biofilms in food processing plants represent not only a problem to human health but also cause economic losses by technical failure in several systems. In fact, many foodborne outbreaks have been found to be associated with biofilms. Biofilms may be prevented by regular cleaning and disinfection, but this does not completely prevent biofilm formation. Besides, due to their diversity and to the development of specialized phenotypes, it is well known that biofilms are more resistant to cleaning and disinfection than planktonic microorganisms. In recent years, a considerable effort has been made in the prevention of microbial adhesion and biofilm formation on food processing surfaces and novel technologies have been introduced. In this context, this chapter discusses the main conventional and emergent strategies that have been employed to prevent bacterial adhesion to food processing surfaces and thus to efficiently maintain good hygiene throughout the food industries.

Introduction [to Food Safety in the Seafood Industry: A practical guide for ISO 22000 and FSSC 22000 implementation]

The prelims comprise: * Half-Title Page * Dedication Page * Title Page * Copyright Page * Table of Contents * Foreword * Acknowledgements * Disclaimer * Introduction

Engineering a commercial cold-adapted xylanase for improved low pH stability

Dissertação de mestrado em Genética Molecular

Development of nanohydrogels as a vehicle for the release of bioactive compounds in food matrices

PhD in Chemical and Biological Engineering

Development of composite auxetic structures for civil engineering applications

Tese de Doutoramento em Engenharia Têxtil

Modelação de processos num serviço de uma organização de ensino superior

Dissertação de mestrado integrado em Engenharia e Gestão Industrial

How does banking industry influence economic growth in Latin American countries?

Mestrado em Finanças

Ingeniería de glicanos: diseño de inmunógenos y ligandos de lectinas. Glycan engineering: design of immunogens and ligand of lectins.

La ingeniería de glicanos es un área de investigación emergente, la que posee múltiples aplicaciones en medicina. Mediante esta herramienta se intentará reducir la flexibilidad de las uniones glicosídicas de antígenos tumorales, como la del antígeno T (Galbeta3GalNAcalfa-Ser/Thr). Aquí se realizarán las menores alteraciones posibles en la topología de glicanos que generen la mejor respuesta inmune hacia el antígeno de interés. Por otra parte, se buscará ligandos de alta afinidad que interaccionen con lectinas involucradas en diseminación de metástasis. Mediante ensayos teóricos de Docking se tratará de hallar modificaciones topológicas de glicanos que potencialmente tengan propiedades anti-adhesivas para células tumorales. Este proyecto constará de tres etapas: una teórica, utilizando programas de cálculos para ensayos de Docking y mínimos energéticos de glicanos. Otra de síntesis, generando los glicoconjugados sugeridos en la etapa anterior. En la última, se verificará si estos glicanos rediseñados adquirieron las propiedades biológicas deseadas. Así se determinará si generan una respuesta inmune que reconozca antígenos y células tumorales. También, se analizarán las propiedades anti-adhesivas de los glicanos utilizando diferentes modelos experimentales. Finalmente, se determinará si los inmunógenos producidos y/o glicoconjugados rediseñados poseen efecto en el desarrollo tumoral y sobrevida animal.

Los entornos virtuales como herramienta sustituta del laboratorio "real" y como complemento de la enseñanza de Química a alumnos de Ingeniería. Virtual environments as substitute tools for the "conventional" laboratories and as a complement for Chemistry teaching to Engineering students.

El presente proyecto se plantea el siguiente problema de investigación:¿Cuál es la eficacia de los entornos virtuales de enseñanza para optimizar los aprendizajes de Química? Se sostiene la hipótesis de que los entornos virtuales de enseñanza, empleados como mediación instrumental, son eficaces para optimizar los aprendizajes de química, particularmente facilitando la vinculación y reversibilidad entre "mundo micro y macroscópico"; capacidad que usualmente sólo se atribuye al trabajo experimental de laboratorio. Los objetivos propuestos son: Determinar la eficacia de entornos virtuales de enseñanza, como mediaciones instrumentales, para optimizar los aprendizajes de química en estudiantes de ingeniería. Implementar un entrono virtual de enseñanza de química, diseñado como mediación instrumental y destinado a estudiantes de dos carreras de ingeniería del IUA. Evaluar el desarrollo y los resultados de la innovación introducida. Comparar los resultados de la innovación con los resultados de la enseñanza usual. Derivar conclusiones acerca de la eficacia de la innovación propuesta. Socializar el conocimiento producido en ámbitos científico-tecnológicos reconocidos. Se generará un aula virtual en plataforma Educativa y utilidzando el laboratorio de computación de la institución se buscará desarrollar laboratorios virtuales donde se propondrán actividades de simulación de trabajo experimental. Los resultados esperados son: - Un Aula Virtual que cumpla funciones análogas a las de un laboratorio experimental. - Información válida y confiable acerca de la eficacia de la misma como medio para optimizar los aprendizajes de química. - Publicaciones en ámbitos científico-tecnológicos reconocidos que sometan a juicio público la innovación y la investigación efectuadas. La importancia del proyecto radica principalmente en poner a prueba la eficacia de los entornos virtuales para optimizar los aprendizajes de química, analogando tareas usualmente limitadas al trabajo experimental de laboratorio. Su pertinencia apunta a un replanteo del curriculo de los cursos de Química para estudiantes de Ingeniería.

Impact of wind power generation on the electricity supply industry

The objective of this dissertation is to investigate the effect wind energy has on the Electricity Supply Industry in Ireland. Wind power generation is a source of renewable energy that is in abundant supply in Ireland and is fast becoming a resource that Ireland is depending on as a diverse and secure of supply of energy. However, wind is an intermittent resource and coupled with a variable demand, there are integration issues with balancing demand and supply effectively. To maintain a secure supply of electricity to customers, it is necessary that wind power has an operational reserve to ensure appropriate backup for situations where there is low wind but high demand. This dissertation examines the affect of this integration by comparing wind generation to that of conventional generation in the national grid. This is done to ascertain the cost benefits of wind power generation against a scenario with no wind generation. Then, the analysis examines to see if wind power can meet the pillars of sustainability. This entails looking at wind in a practical scenario to observe how it meets these pillars under the criteria of environmental responsibility, displacement of conventional fuel, cost competitiveness and security of supply.

A comparison of environmental licensing systems in operation in the wood panel manufacturing industry in the Northern Hemisphere

The objective of this thesis is to compare and contrast environmental licensing systems, for the wood panel industry, in a number of countries in order to determine which system is the best from an environmental and economic point of view. The thesis also examines the impact which government can have on industry and the type of licensing system in operation in a country. Initially, the thesis investigates the origins of the various environmental licensing systems which are in operation in Ireland, Scotland, Wales, France, USA and Canada. It then examines the Environmental Agencies which control and supervise industry in these countries. The impact which the type of government (i.e. unitary or federal) in charge in any particular country has on industry and the Regulatory Agency in that country is then described. Most of the mills in the thesis make a product called OSB (Oriented Strand Board) and the manufacturing process is briefly described in order to understand where the various emissions are generated. The main body of the thesis examines a number of environmental parameters which have emission limit values in the licenses examined, although not all of these parameters have emission limit values in all of the licenses. All of these parameters are used as indicators of the potential impact which the mill can have on the environment. They have been set at specific levels by the Environmental Agencies in the individual countries to control the impact of the mill. Following on from this, the two main types of air pollution control equipment (WESPs and RTOs) are described in regard to their function and capabilities. The mill licenses are then presented in the form of results tables which compare air results and water results separately. This is due to the fact that the most significant emission from this type of industry is to air. A matrix system is used to compare the licenses so that the comparison can be as objective as possible. The discussion examines all of the elements previously described and from this it was concluded that the IPC licensing system is the best from an environmental and economic point of view. It is a much more expensive system to operate than the other systems examined, but it is much more comprehensive and looks at the mill as a whole rather than fragmenting it. It was also seen that the type of environmental licensing system which is in place in a country can play a role in the locating of an industry as certain systems were seen to have more stringent standards attached to them. The type of standard in place in a country is in turn influenced by the type of government which is in place in that country.

An analysis of the use of photogrammetric sorting to audit construction and demolition waste production on site

This study analyses the area of construction and demolition waste (C & D W) auditing. The production of C&DW has grown year after year since the Environmental Protection Agency (EPA) first published a report in 1996 which provided data for C&D W quantities for 1995 (EPA, 1996a). The most recent report produced by the EPA is based on data for 2005 (EPA, 2006). This report estimated that the quantity of C&DW produced for that period to be 14 931 486 tonnes. However, this is a ‘data update’ report containing an update on certain waste statistics so any total provided would not be a true reflection of the waste produced for that period. This illustrates that a more construction site-specific form of data is required. The Department of Building and Civil Engineering in the Galway-Mayo Institute of Technology have carried out two recent research projects (Grimes, 2005; Kelly, 2006) in this area, which have produced waste production indicators based on site-specific data. This involved the design and testing of an original auditing tool based on visual characterisation and the application of conversion factors. One of the main recommendations of these studies was to compare this visual characterisation approach with a photogrammetric sorting methodology. This study investigates the application of photogrammetric sorting on a residential construction site in the Galway region. A visual characterisation study is also carried out on the same project to compare the two methodologies and assess the practical application in a construction site environment. Data collected from the waste management contractor on site was also used to provide further evaluation. From this, a set of waste production indicators for new residential construction was produced: □ 50.8 kg/m2 for new residential construction using data provided by the visual characterisation method and the Landfill Levy conversion factors. □ 43 kg/m2 for new residential construction using data provided by the photogrammetric sorting method and the Landfill Levy conversion factors. □ 23.8 kg/m2 for new residential construction using data provided by Waste Management Contractor (WMC). The acquisition of the data from the waste management contractor was a key element for testing of the information produced by the visual characterisation and photogrammetric sorting methods. The actual weight provided by the waste management contractor shows a significant difference between the quantities provided.

Management and evaluation of a range of forest species for use as cut foliage

This project explored the possibility of harvesting marketable foliage stems in addition to producing timber from plantations of Larix leptolepis, Cupressus macrocarpa ‘Goldcrest’ and Tsuga heterophylla. Data recorded from trial sites included both growth parameters, in the form of height and diameter increments, and production parameters in the form of foliage stem yields. Results varied with species and site type. In many cases, results achieved appear to have been influenced more by the biology of the trees than by the treatments alone. Trials were also established to investigate methods of managing old or over grown Abies procera Christmas tree plantations for forest foliage production. Shelf life testing and market research into the domestic trade of forest foliage were also conducted over the course of the project. Recommendations for managing forest plantations for foliage production as well as a general discussion on the industry are presented in this report.