Optimization of parameters for fiber laser-MAG hybrid welding in shipbuilding applications

The Arctic region becoming very active area of the industrial developments since it may contain approximately 15-25% of the hydrocarbon and other valuable natural resources which are in great demand nowadays. Harsh operation conditions make the Arctic region difficult to access due to low temperatures which can drop below -50 °C in winter and various additional loads. As a result, newer and modified metallic materials are implemented which can cause certain problems in welding them properly. Steel is still the most widely used material in the Arctic regions due to high mechanical properties, cheapness and manufacturability. Moreover, with recent steel manufacturing development it is possible to make up to 1100 MPa yield strength microalloyed high strength steel which can be operated at temperatures -60 °C possessing reasonable weldability, ductility and suitable impact toughness which is the most crucial property for the Arctic usability. For many years, the arc welding was the most dominant joining method of the metallic materials. Recently, other joining methods are successfully implemented into welding manufacturing due to growing industrial demands and one of them is the laser-arc hybrid welding. The laser-arc hybrid welding successfully combines the advantages and eliminates the disadvantages of the both joining methods therefore produce less distortions, reduce the need of edge preparation, generates narrower heat-affected zone, and increase welding speed or productivity significantly. Moreover, due to easy implementation of the filler wire, accordingly the mechanical properties of the joints can be manipulated in order to produce suitable quality. Moreover, with laser-arc hybrid welding it is possible to achieve matching weld metal compared to the base material even with the low alloying welding wires without excessive softening of the HAZ in the high strength steels. As a result, the laser-arc welding methods can be the most desired and dominating welding technology nowadays, and which is already operating in automotive and shipbuilding industries with a great success. However, in the future it can be extended to offshore, pipe-laying, and heavy equipment industries for arctic environment. CO2 and Nd:YAG laser sources in combination with gas metal arc source have been used widely in the past two decades. Recently, the fiber laser sources offered high power outputs with excellent beam quality, very high electrical efficiency, low maintenance expenses, and higher mobility due to fiber optics. As a result, fiber laser-arc hybrid process offers even more extended advantages and applications. However, the information about fiber or disk laser-arc hybrid welding is very limited. The objectives of the Master’s thesis are concentrated on the study of fiber laser-MAG hybrid welding parameters in order to understand resulting mechanical properties and quality of the welds. In this work only ferrous materials are reviewed. The qualitative methodological approach has been used to achieve the objectives. This study demonstrates that laser-arc hybrid welding is suitable for welding of many types, thicknesses and strength of steels with acceptable mechanical properties along very high productivity. New developments of the fiber laser-arc hybrid process offers extended capabilities over CO2 laser combined with the arc. This work can be used as guideline in hybrid welding technology with comprehensive study the effect of welding parameter on joint quality.

Rakennuksen tietomallien hyödyntämisen edellytykset rakentamisen valmistelu- ja rakennusvaiheessa

Työn tavoitteena oli tutkia, kuinka rakennuksen tietomallia voidaan hyödyntää rakennusliikkeen tuotannonsuunnittelu- ja rakennusvaiheessa sekä mitä sen hyödyntäminen edellyttää rakennuksen tietomallin informaatiosisällöltä. Tavoitteena oli myös tunnistaa tuotannonohjauksen ”pullonkauloja”, joissa kohdin toimintaa voitaisiin tietomallien avulla tehostaa. Työn teoreettisena taustana on aineettoman pääoman merkitys yrityksen kilpailuedun luojana, tietämyksen hallinta ja teknologian hyödyntäminen tietämyksen hallinnassa. Työssä tutkittiin rakennustuotannon johtamista ja tietomallintamisen hyödyntämistä rakentamisessa sekä tietomallien hyödynnettävyyden varmistamista yleisellä tasolla. Työssä tutustuttiin kohdeyritykseen tuotannonohjaukseen ja rakennusvaiheen tietomallien hyödyntämisen nykytilaan. Tuloksina voidaan todeta, että tietomallien tuotannonsuunnittelu- ja rakennusvaiheen tietomallien hyödyntämisen perusedellytys on tietomallien oikeellisuus sekä tietomallien ja perinteisten suunnitteludokumenttien yhdenmukainen tietosisältö. Tämän lisäksi tarvitaan suunnitellut toimintatavat ja toimivat tiedonjakelukanavat sekä kyky hyödyntää tieto- ja viestintäteknologiaa. Tietomallit eivät tämän tutkimuksen perusteella näytä luoneen tarvetta uudenlaisille tuotanto-organisaation roolituksille. Tietomalleilla uskotaan olevan positiivisia vaikutuksia rakennusvaiheen muutostenhallinnassa. Tuotantoorganisaation henkilöillä oli positiivisia odotuksia tietomallien hyödyntämisestä tuotannonohjauksessa. Tietomallien odotetaan tukevan erillisten suunnitelmien muodostamien kokonaisuuksien hahmottamista, rakennusvaiheen osapuolten yhteistyötä ja töiden yhteensovitusta sekä logistiikan suunnittelua ja vaikutusten havainnointia.

Creating an open-books implementation framework for a maintenance-related value-based life-cycle model

This study is a qualitative action research by its nature with elements of personal design in the form of a tangible model implementation framework construction. Utilized empirical data has been gathered via two questionnaires in relation to the arranged four workshop events with twelve individual participants. Five of them represented maintenance customers, three maintenance service providers and four equipment providers respectively. Further, there are two main research objectives in proportion to the two complementary focusing areas of this thesis. Firstly, the value-based life-cycle model, which first version has already been developed prior to this thesis, requires updating in order to increase its real-life applicability as an inter-firm decision-making tool in industrial maintenance. This first research objective is fulfilled by improving appearance, intelligibility and usability of the above-mentioned model. In addition, certain new features are also added. The workshop participants from the collaborating companies were reasonably pleased with made changes, although further attention will be required in future on the model’s intelligibility in particular as main results, charts and values were all reckoned as slightly hard to understand. Moreover, upgraded model’s appearance and added new features satisfied them the most. Secondly and more importantly, the premises of the model’s possible inter-firm implementation process need to be considered. This second research objective is delivered in two consecutive steps. At first, a bipartite open-books supported implementation framework is created and its different characteristics discussed in theory. Afterwards, the prerequisites and the pitfalls of increasing inter-organizational information transparency are studied in empirical context. One of the main findings was that the organizations are not yet prepared for network-wide information disclosure as dyadic collaboration was favored instead. However, they would be willing to share information bilaterally at least. Another major result was that the present state of companies’ cost accounting systems will definitely need implementation-wise enhancing in future since accurate and sufficiently detailed maintenance data is not available. Further, it will also be crucial to create supporting and mutually agreed network infrastructure. There are hardly any collaborative models, methods or tools currently in usage. Lastly, the essential questions about mutual trust and predominant purchasing strategies are cooperation-wise important. If inter-organizational activities are expanded, a more relational approach should be favored in this regard. Mutual trust was also recognized as a significant cooperation factor, but it is hard to measure in reality.

Kunnossapidon tietojärjestelmän määrittäminen ja hankinta prosessiyritykselle

Työn tavoitteena oli tutkia ja määrittää case-yrityksenä olleen prosessiyrityksen kunnossapitojärjestelmän vaatimusten määrittelyyn vaikuttavia tekijöitä sekä määrittää prosessiyrityksen toimintaympäristöön soveltuvan kunnossapitojärjestelmän rakenne. Teoreettisena taustana oli liikeyritysten strategian ja toiminnan suunnittelu kehitettäessä kunnossapidon palveluprosessia. Lisäksi teoriaosuudessa esiteltiin kunnossapidon keskeisimmät teoriat ja niiden soveltaminen kunnossapitotoiminnassa. Työn empiriaosuudessa esiteltiin case-yrityksen kunnossapitojärjestelmäprosessin hankinnan vaiheet, valinta ja kunnossapitojärjestelmän käytettävyyden varmistaminen workshopeissa sekä jatkotutkimusaiheet. Työn avulla case-yrityksenä olleelle prosessiyritykselle saatiin valittua toimiva kunnossapitojärjestelmä. Työtä on mahdollista hyödyntää vastaavissa projekteissa muissa yrityksissä.

Kartongin käyristymiseen vaikuttavat tekijät ja niiden hallinta valmistusprosessissa

Työssä selvitettiin uuden kostutuslaitteen toimivuutta kartongin käyristymisen hallinnassa. Työn tavoitteena oli löytää kostutuslaitteelle energiatehokas ja käyttäjäystävällinen ajotapa. Lisäksi pyrittiin etsimään tärkeimmät kartongin käyristymiseen vaikuttavat prosessimuuttujat ja selvittämään voidaanko niitä hyödyntää käyryyden hallinnassa. Työssä tutkittiin myös kostutuslaitteen käytön vaikutuksia kartongin muihin tärkeisiin ominaisuuksiin, jotta saataisiin selville miten uusi tuote eroaisi referenssituotteesta. Kirjallisuusosassa selvitetään, mitkä tekijät vaikuttavat kartongin käyristymiseen ja miten käyristymistä pystytään hallitsemaan. Kirjallisuusosassa käsitellään myös, miten kartongin käyristymiseen tarvittavat epäsymmetriset mittamuutokset kartongin rakenteessa syntyvät lähtien kosteuden vaikutuksista aina yksittäisten kuitujen tasolta koko kartongin rakenteeseen asti. Kokeellisessa osassa selvitetään Inkeroisten Kartonkitehtaan kartonkikoneella ajettujen koeajojen avulla toimivaa ajotapaa kostutuslaitteelle ja eri prosessimuuttujien vaikutusta käyristymiseen. Koeajoissa tutkittiin epäsymmetrisen kostutuksen, kuivatuksen, sitoutuneisuuden, sekä kuituorientaation vaikutuksia kartongin käyristymiseen. Koeajojen perusteella merkittävimmiksi tekijöiksi kartongin käyristymiseen osoittautuivat epäsymmetrinen kostutus sekä kuivatus. Muiden tekijöiden vaikutus kartongin käyristymiseen jäi vähäiseksi tai liian epäselväksi, jotta olisi voitu osoittaa, että muutos kartongin käyryydessä johtuisi nimenomaan kyseisen tekijän muutoksesta. Verrattaessa uutta tuotetta referenssituotteeseen kartongin pinta- tai lujuusominaisuuksissa ei havaittu tapahtuvan merkittävää muutosta, kun selkäkerroksen pintaliimaus korvattiin sumukostutuksella.

Designing a user interface for game developers to enter game specific information

Designing user interfaces for novel software systems can be challenging since the usability preferences of the users are not well known. This thesis presents a usability study conducted for the development of a user interface for game developers to enter game specific information. By conducting usability testing, the usability preferences of game developers were explored and the design was shaped according to their needs. An assessment of the overall usability of the final design is provided together with the main findings that include the usability preferences and design recommendations. The results showed that the most valuable usability preferences are quickness, error tolerance and the ability to constantly inspect the entered information.

Use of herbicides on turfgrass

In crop production, weeds must be controlled so as not to adversely affect crop yield and crop quality. Thus, a low level of weeds infesting a field, in most instances, is not a problem. Except in sod or seed production, turfgrass does not have a yield component. The value of turfgrass is its inherent aesthetic quality and usability. Aesthetic quality is the beauty and value that turfgrass adds to a managed landscape. Usability can be the durability of a sport field, trueness of golf putting green roll, or reduction in soil loss from water runoff or wind. Any weed presence in turfgrass can decrease the aesthetic quality and usability of turfgrass. Utilizing herbicides is the only way to completely control weeds in a turfgrass stand. While it is possible to reduce weed populations using cultural or mechanical management practices, it is impossible to completely eliminate weeds as can be accomplished with herbicides. This manuscript will review the major herbicides used in turfgrass in the United States with respect to their modes of action, herbicide family, and primary use in turfgrass.

Conceptualizing and measuring human anxiety on the Internet

Since the 1990’s, the Internet has played a central role in our daily lives. The Internet is an integral part of our personal, business, family, research, entertainment, academic and social life. However, there are social implications in using the Internet that are dependent on categories such as gender, age, ethnicity and cultural attributes. This social aspect can play a detrimental role in the expression of human anxiety on the Internet. An anxiety is a complex phenomenon that requires further elaboration. Thus, the aim of this thesis is to investigate human anxiety, or specifically, whether Internet anxiety can be conceptualized and measured. This thesis utilizes literature, qualitative and quantitative research methodologies, and a triangulation validation approach to conceptualize and measure the Internet anxiety phenomenon. In particular, the aim is to explore anxiety levels of Internet participants to develop and validate an Internet anxiety scale based on earlier research on Internet anxiety. The results of the dissertation present a two phase study. In Phase I, a smaller set of studies were conducted with a limited sample size. In Phase II, the research topic was investigated using 385 participants. Based on a number of studies or experiments, the state-of-the-art discovered in this thesis is creation, design, and validation of two scales, the Self-Assessment Scale (SAS) and a Modified Internet Anxiety Scale (MIAS) for measuring users’ anxieties on the Internet. The result of this dissertation is a conceptualization and measurement of various types of Internet anxiety and measurement of affective feelings of users on the Internet. As a proof-of-concept of measuring Internet anxiety, this thesis describes the author’s implementation of three sets of tools: MyAnxiety, introducing Internet anxieties types; Intelligentia, for collecting Internet anxieties types; and MyIAControl tool, implemented as a browser plug-in, for measuring affective feelings of users on the Internet. Conclusions drawn from the results show that these empirically validated scales and tools might be useful for researchers and practitioners in understanding and measuring the Internet anxiety phenomenon further.

Prediction of market switching and delisting events from OMX First North Nordic multilateral stock exchange

This thesis studies the predictability of market switching and delisting events from OMX First North Nordic multilateral stock exchange by using financial statement information and market information from 2007 to 2012. This study was conducted by using a three stage process. In first stage relevant theoretical framework and initial variable pool were constructed. Then, explanatory analysis of the initial variable pool was done in order to further limit and identify relevant variables. The explanatory analysis was conducted by using self-organizing map methodology. In the third stage, the predictive modeling was carried out with random forests and support vector machine methodologies. It was found that the explanatory analysis was able to identify relevant variables. The results indicate that the market switching and delisting events can be predicted in some extent. The empirical results also support the usability of financial statement and market information in the prediction of market switching and delisting events.

BORIS – It’s never too late to start a repository

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Hacking User Experience in a Repository Service: ScholarSphere as a Case Study

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

DSpace for Data Revisited

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

For the Record: DSpace and Academic Accreditation

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Lipase and omega-transaminase catalysis in preparation of alcohol and amine enantiomers

Enantiopure intermediates are of high value in drug synthesis. Biocatalysis alone or combined with chemical synthesis provides powerful tools to access enantiopure compounds. In biocatalysis, chemo-, regio- and enantioselectivity of enzymes are combined with their inherent environmentally benign nature. Enzymes can be applied in versatile chemical reactions with non-natural substrates under synthesis conditions. Immobilization of an enzyme is a crucial part of an efficient biocatalytic synthesis method. Successful immobilization enhances the catalytic performance of an enzyme and enables its reuse in successive reactions. This thesis demonstrates the feasibility of biocatalysis in the preparation of enantiopure secondary alcohols and primary amines. Viability and synthetic usability of the studied biocatalytic methods have been addressed throughout this thesis. Candida antarctica lipase B (CAL-B) catalyzed enantioselective O-acylation of racemic secondary alcohols was successfully incorporated with in situ racemization in the dynamic kinetic resolution, affording the (R)-esters in high yields and enantiopurities. Side reactions causing decrease in yield and enantiopurity were suppressed. CAL-B was also utilized in the solvent-free kinetic resolution of racemic primary amines. This method produced the enantiomers as (R)-amides and (S)-amines under ambient conditions. An in-house sol-gel entrapment increased the reusability of CAL-B. Arthrobacter sp. omega-transaminase was entrapped in sol-gel matrices to obtain a reusable catalyst for the preparation enantiopure primary amines in an aqueous medium. The obtained heterogeneous omega-transaminase catalyst enabled the enantiomeric enrichment of the racemic amines to their (S)-enantiomers. The synthetic usability of the sol-gel catalyst was demonstrated in five successive preparative kinetic resolutions.

A Business continuity management maturity model : the search for an ISO 22301 Compliant BCM Maturity model

BCM (business continuity Management) is a holistic management process aiming at ensuring business continuity and building organizational resilience. Maturity models offer organizations a tool for evaluating their current maturity in a certain process. In the recent years BCM has been subject to international ISO standardization, while the interest of organizations to bechmark their state of BCM agains standards and the use of maturity models for these asessments has increased. However, although new standards have been introduced, very little attention has been paid to reviewing the existing BCM maturity models in research - especially in the light of the new ISO 22301 standard for BCM. In this thesis the existing BCM maturily models are carefully evaluated to determine whetherthey could be improved. In order to accomplish this, the compliance of the existing models to the ISO 22301 standard is measured and a framework for assessing a maturitymodel´s quality is defined. After carefully evaluating the existing frameworks for maturity model development and evaluation, an approach suggested by Becker et al. (2009) was chosen as the basis for the research. An additionto the procedural model a set of seven research guidelines proposed by the same authors was applied, drawing on the design-science research guidelines as suggested by Hevner et al. (2004). Furthermore, the existing models´ form and function was evaluated to address their usability. Based on the evaluation of the existing BCM maturity models, the existing models were found to have shortcomings in each dimension of the evaluation. Utilizing the best of the existing models, a draft version for an enhanced model was developed. This draft model was then iteratively developed by conducting six semi-structured interviews with BCM professionals in finland with the aim of validating and improving it. As a Result, a final version of the enhanced BCM maturity model was developed, conforming to the seven key clauses in the ISO 22301 standard and the maturity model development guidelines suggested by Becker et al. (2009).