Class participation as a learning and assessment strategy in law : facilitating students’ engagement, skills development and deep learning

Assessment has widely been described as being ‘at the centre of the student experience’. It would be difficult to conceive of the modern teaching university without it. Assessment is accepted as one of the most important tools that an educator can deploy to influence both what and how students learn. Evidence suggests that how students allocate time and effort to tasks and to developing an understanding of the syllabus is affected by the method of assessment utilised and the weighting it is given. This is particularly significant in law schools where law students may be more preoccupied with achieving high grades in all courses than their counterparts from other disciplines. However, well-designed assessment can be seen as more than this. It can be a vehicle for encouraging students to learn and engage more broadly than with the minimums required to complete the assessment activity. In that sense assessment need not merely ‘drive’ learning, but can instead act as a catalyst for further learning beyond what a student had anticipated. In this article we reconsider the potential roles and benefits in legal education of a form of interactive classroom learning we term assessable class participation (‘ACP’), both as part of a pedagogy grounded in assessment and learning theory, and as a platform for developing broader autonomous approaches to learning amongst students. We also consider some of the barriers students can face in ACP and the ways in which teacher approaches to ACP can positively affect the socio-emotional climates in classrooms and thus reduce those barriers. We argue that the way in which a teacher facilitates ACP is critical to the ability to develop positive emotional and learning outcomes for law students, and for teachers themselves.

Design thinking frameworks as transformative cross-disciplinary pedagogy

Final report for the Australian Government Office for Learning and Teaching. "This seed project ‘Design thinking frameworks as transformative cross-disciplinary pedagogy’ aimed to examine the way design thinking strategies are used across disciplines to scaffold the development of student attributes in the domain of problem solving and creativity in order to enhance the nation’s capacity for innovation. Generic graduate attributes associated with innovation, creativity and problem solving are considered to be amongst the most important of all targeted attributes (Bradley Review of Higher Education, 2009). The project also aimed to gather data on how academics across disciplines conceptualised design thinking methodologies and strategies. Insights into how design thinking strategies could be embedded at the subject level to improve student outcomes were of particular interest in this regard. A related aim was the investigation of how design thinking strategies could be used by academics when designing new and innovative subjects and courses." Case Study 3: QUT Community Engaged Learning Lab Design Thinking/Design Led Innovation Workshop by Natalie Wright Context "The author, from the discipline area of Interior Design in the QUT School of Design, Faculty of Creative Industries, is a contributing academic and tutor for The Community Engaged Learning Lab, which was initiated at Queensland University of Technology in 2012. The Lab facilitates university-wide service-learning experiences and engages students, academics, and key community organisations in interdisciplinary action research projects to support student learning and to explore complex and ongoing problems nominated by the community partners. In Week 3, Semester One 2013, with the assistance of co-lead Dr Cara Wrigley, Senior Lecturer in Design led Innovation, a Masters of Architecture research student and nine participating industry-embedded Masters of Research (Design led Innovation) facilitators, a Design Thinking/Design led Innovation workshop was conducted for the Community Engaged Learning Lab students, and action research outcomes published at 2013 Tsinghua International Design Management Symposium, December 2013 in Shenzhen, China (Morehen, Wright, & Wrigley, 2013)."

Do instructional attributes pose multicollinearity problems? An empirical exploration

It is commonly perceived that variables ‘measuring’ different dimensions of teaching (construed as instructional attributes) used in student evaluation of teaching (SET) questionnaires are so highly correlated that they pose a serious multicollinearity problem for quantitative analysis including regression analysis. Using nearly 12000 individual student responses to SET questionnaires and ten key dimensions of teaching and 25 courses at various undergraduate and postgraduate levels for multiple years at a large Australian university, this paper investigates whether this is indeed the case and if so under what circumstances. This paper tests this proposition first by examining variance inflation factors (VIFs), across courses, levels and over time using individual responses; and secondly by using class averages. In the first instance, the paper finds no sustainable evidence of multicollinearity. While, there were one or two isolated cases of VIFs marginally exceeding the conservative threshold of 5, in no cases did the VIFs for any of the instructional attributes come anywhere close to the high threshold value of 10. In the second instance, however, the paper finds that the attributes are highly correlated as all the VIFs exceed 10. These findings have two implications: (a) given the ordinal nature of the data ordered probit analysis using individual student responses can be employed to quantify the impact of instructional attributes on TEVAL score; (b) Data based on class averages cannot be used for probit analysis. An illustrative exercise using level 2 undergraduate courses data suggests higher TEVAL scores depend first and foremost on improving explanation, presentation, and organization of lecture materials.

The "virtuous circle": A case study examining the case for better embedding of Work Integrated Learning approaches into university journalism cirriculums

This paper explores the potential to focus and develop the approach to Work Integrated Learning (WIL)in journalism courses where this method is seen as a core principal of the program. It argues that, in many cases, such approaches are ill-defined and underdeveloped, a fact that weakens the possibility for strong course outcomes. It then examines the particular case of QUT coverage of the 2014 G20 Leader's summit to illustrate how an all-of-course WIL approach to G20 coverage-coupled with a tailored interaction with the library-might provide an enhanced student experience as well as unlock the potential for greater knowledge transfer between university journalism courses and industry partners.

In pursuit of some appreciation: Assessment and group membership in children’s second stories

Group membership is central to social interaction. Within peer groups, social hierarchies and affiliations are matters to which members seriously attend (Corsaro, 2014). Studies of peer groups highlight how status is achieved through oppositional actions. This paper examines the way in which competition and collaboration in a children’s peer group accomplishes status during the production and management of “second stories” (Sacks 1992). We present analysis of the interaction of young boys in a preparatory year playground who are engaged in a single instance of storytelling “rounds”. Analysis highlights the pivotal role of members’ contributions, assessments and receipts in a series of second stories that enact a simultaneously competitive and collaborative local order.

Teaching manufacturing engineering at tertiary institutions in conjunction with engineering design and engineering materials

Tertiary institutions now face serious challenges. Modern industry requires engineering graduates with strong knowledge of modern technologies, highly practical focus, management skills, ability to work individually and in a team, understanding of environmental issues and many other skills and graduate attributes. Institutions in the tertiary sector change courses and modify curriculum to reflect challenges of the modern industry and make engineering graduates better prepared for the “real world”. Queensland University of Technology in the recent years introduced an innovative structure of engineering courses with a common core for Bachelor of Engineering Mechanical, Infomechatronics and Medical, where manufacturing is taught in conjunction with engineering design and engineering materials. In this paper we discuss the innovative curriculum structure, teaching and learning approaches of coherent delivery of manufacturing in conjunction with engineering design and

Deconstructing expected passenger experience in airports

The effect of passenger satisfaction on airport profitability has been widely acknowledged in the aviation industry. As a result, there has been much attention directed towards developing a deeper understanding of the factors that influence the passenger experience. In this paper, we explore passenger experience from a novel perspective - that of the activities expected to be undertaken by passengers while in the airport terminal building. Using the Taxonomy of Passenger Experience (TOPA) as our framework, we look at the pre-travel interview data of 48 participants. The results of our analysis are used to construct an activity-centred account of the expected passenger experience for international departures. Our exploration of the expected passenger experienced revealed that not all of the TOPA activities have an equal impact on the passengers' expected experience. The processing, consumptive, preparatory and queuing activity groups featured most prominently in passengers' accounts of their upcoming airport experiences. Of these, the preparatory category was found to have the most direct impact on passenger satisfaction. Additionally, our analysis indicated that utilising queue time to prepare passengers for upcoming processing activities could have a positive effect on both satisfaction and processing efficiency. A further outcome of this research was the observation that "shopping" did not form a part of the expected experience of any of the interviewed participants. The outcomes of this study can be used by airports to assist in the management of passengers' expected experience in the terminal building. As passenger expectations and passenger satisfaction are intrinsically linked, understanding which activities have the most impact on satisfaction provides a basis from which alternate design choices can be evaluated when constructing, or fine-tuning, airport terminal designs.

UQ in Vietnam: Teaching journalism students foreign correspondence

The University of Queensland has developed Work Integrated Learning (WIL) courses for groups of 10 students at a time to travel to Vietnam to engage in intercultural learning and working as foreign correspondents for a dedicated UQ multimedia website. Their radio, television, print and photojournalism reports have also been made available to media around the world under Creative Commons arrangements. This article reports on the students' experience in both WIL courses where they were exposed to intensive, immerse and experiential teaching and coaching by a lecturer (the researcher who is a former foreign correspondent for the ABC) and two tutors with expertise in editorial and technical production.

Studying industrial design : Exploring the experience of female students

Despite a significant increase in the number of women enrolling and graduating from design courses, the reality is that women remain ‘invisible’ in the design profession (Bruce, 1985). Over two decades ago, Bruce and Lewis (1990) argued that women were less likely than men to be designers due to three key gendered hurdles: the completion of a design degree, getting a design job and obtaining success in a design job. This paper focuses specifically on Australian women’s experience of hurdle one: the completion of a design degree, utilising industrial design as a case study. Semi-structured interview questions (exploring issues such as experience in class and the workshop, accessibility of the course and content, types of projects etc) were recorded and transcribed verbatim, with a thematic analysis conducted to better understand women’s experiences in completing their industrial design degree. This paper focuses on one key theme “navigating the design studio”, which comprises of three sub-themes: design skill development, the workshop experience and course evaluation. These findings highlight the need to understand the educational experience to ensure female designers remain motivated and eventually employable.

Numeracy and statistical reasoning on entering university

The relationship between mathematics and statistical reasoning frequently receives comment (Vere-Jones 1995, Moore 1997); however most of the research into the area tends to focus on mathematics anxiety. Gnaldi (2003) showed that in a statistics course for psychologists, the statistical understanding of students at the end of the course depended on students’ basic numeracy, rather than the number or level of previous mathematics courses the student had undertaken. As part of a study into the development of statistical thinking at the interface between secondary and tertiary education, students enrolled in an introductory data analysis subject were assessed regarding their statistical reasoning, basic numeracy skills, mathematics background and attitudes towards statistics. This work reports on some key relationships between these factors and in particular the importance of numeracy to statistical reasoning.

Numeracy counts in the statistical reasoning equation

The relationship between mathematics and statistical reasoning frequently receives comment (Vere-Jones 1995, Moore 1997); however most of the research into the area tends to focus on maths anxiety. Gnaldi (Gnaldi 2003) showed that in a statistics course for psychologists, the statistical understanding of students at the end of the course depended on students’ basic numeracy, rather than the number or level of previous mathematics courses the student had undertaken. As part of a study into the development of statistical thinking at the interface between secondary and tertiary education, students enrolled in an introductory data analysis subject were assessed regarding their statistical reasoning ability, basic numeracy skills and attitudes towards statistics. This work reports on the relationships between these factors and in particular the importance of numeracy to statistical reasoning.

Black Nectar

Black Nectar is a site-specific light & sound installation, that asks audiences to take slow, sensory walks through the inky-blackness of Bundanon’s forests at night, charting personal courses through seasons of change, animality and imagination – far beyond the blinding lights and howling tones of our contemporary existence. Gathering during a time Europeans once named as ‘spring’ audiences will leave the comfy lights and sounds of Bundanon’s homestead area, to take powerful, personal, silent journeys into the long darks of night, heading ultimately towards the place of ‘Black Nectar’. This most unusual of walks begins with impending darkness, and yet ultimately ends with the faintest, sweetest of glimmers – an en-lightening, re-sounding of our seasonal futures?

The Australian Qualifications Framework for bachelor degree in property economics

The Australian Qualifications Framework (AQF) requires every course in Australia to be reviewed and compliant by 2015. This paper compares the difference between AQF level 7 and level 8 and outlines the paradigm shift in course development, improvement and quality assurance. The AQF requires an outcome oriented process which influences the development, monitoring and implementation of AQF courses. Firstly the graduate profile is defined to underscore the direction of the property course development. Required graduate attributes are then defined, together with course learning outcomes. Each unit/subject assessment is then designed to reflect the desired learning outcomes, and then finally the unit/subject content is backfilled. This reverse engineered process will ensure that all students have been taught and assessed on the graduate attributes which will form the graduate profile. Therefore, monitoring the inclusion of learning outcomes on unit/subject level during course restructure and development is crucial to achieve the course learning outcomes. This paper recommends that further evaluation needs to be conducted in the course development phases by involving professional accreditation bodies, industry representatives, students and recent graduates in this course development process. It also discusses challenges for developing an undergraduate property course.

Blended learning extension in a global collaborative learning environment

The advancement of technology and the internet have created global collaborative learning opportunities and changed learning and teaching in any discipline around the world, including in developing countries. The availability of web-based resources and high-speed internet infrastructure has extended the opportunities to conduct blended learning and new ways of distance learning beyond virtual class room webinars. The aim of this exploratory paper is to review the challenges and opportunities for increasing student engagement in virtual learning. A reflective analysis of international collaborative learning case studies, published articles and practices in virtual learning is used to explore the extension of blended learning organised and participated by institutions from multiple countries. The lessons learnt from flexible learning delivery in professional practice courses in Property Education are used to evaluate potential extensions of blended learning implementation in a global context.