Aspectos médico-legais da cirurgia para hérnia inguinal

Professional responsibility is an inherent factor to the medical activity. Therefore, the adoption of a healthy conduct based on good relationship between the physician and the patient, as well as the understanding of this professional of the several aspects involved in the inguinal hernia repairs, are considered the better means to protect himself against possible litigations with its patients. This issue provides a complete evaluation of medical and legal problems related to the inguinal hernia surgery, and discusses the care that surgeon must exercise during preoperative, intraoperative and postoperative periods. That authors also comment about medical error and its conception from the point of the new Civil Code.

Suomen Ilmavoimien johtamisjärjestelmän evoluutio ilmasotateorian, kansallisten instituutioiden ja johtamisjärjestelmän ulkomaisen kehityksen näkökulmasta

Ilmavoimien johtamisjärjestelmä on osa Ilmavoimien järjestelmäkokonaisuutta, jonka kaksi muuta osaa ovat taistelujärjestelmä ja tukeutumisjärjestelmä. Ilmavoimien materiaalista suorituskykyä rakennetaan tämän järjestelmäajattelun pohjalta. tässä tutkimuksessa Ilmavoimien johtamisjärjestelmää tutkitaan kolmen kokonaisuuden, ilmavalvontajärjestelmän, ilmatilannekuvan muodostamisjärjestelmän ja tulenkäytön johtamisjärjestelmän, näkökulmasta. Ilmavoimien johtamisjärjestelmän laajuuden vuoksi tutkimusaluetta on jouduttu rajaamaan. Tutkimus perustuu evoluutioparadigmaan, jonka mukaisesti kaikki olevainen on evolutionaarista. Mikään tässä ajassa oleva ilmiö ei ole historiaton. Jokaisella ilmiöllä on nykyisyytensä lisäksi historia ja tulevaisuus. Evoluutioparadigman avulla laajennetaan Ilmavoimien johtamisjärjestelmän nykyisyyden ymmärtämistä kuvaamalla ja analysoimalla sen evoluutiota. Tutkimusaineistoa analysoidaan käyttäen hyväksi polkuriippuvuutta evolutionaarisena mallina. tätä mallia on käytetty uusinstitutionaalisessa ja evolutionaarisessa taloustieteessä ja taloushistoriassa tutkittaessa yritysten, toimialojen tai tuotteiden pysyvyyttä markkinoilla sekä erilaisten innovaatioiden vaikuttavuutta menestymiseen eri markkinatilanteissa. Tutkimusasetelman lähtökohtana on Ilmavoimien johtamisjärjestelmäevoluution kuvaaminen kolmen tekijän tasapainoasetelman suhteen, joita ovat instituutiot, ilmasotateoria ja kansainvälinen ilmavoimien johtamisjärjestelmän kehitys. tutkimuksen tavoitteena on löytää institutionaalinen logiikka Ilmavoimien johtamisjärjestelmän evoluutiolle sekä sen eri kehitysprosesseihin liittyvä mahdollinen polkuriippuvuuden logiikka. Tutkittavina instituutioina ovat kansallinen poliittinen päätöksenteko, joka ilmentyy erilaisina komiteamietintöjä, raportteina ja selontekoina. Sotilaallista instituutiota edustavat eri operatiiviset ohjeet, ohjesäännöt ja doktriinit, jotka ovat ohjanneet johtamisjärjestelmäkehitystä. Ilmasotateorian vaikuttavuuden analyysiä varten tutkimuskohteiksi on valittu seitsemän merkittävää ilmasotateoreetikkoa. Kenraalimajuri Giulio douhet, ilmamarsalkka Hugh Trenchard ja kenraalimajuri William Mitchell edustavat ilmasotateorian varhaista kautta. Kansallista ilmasotateorian kehitystä edustavat eversti Richard Lorentz ja kenraalimajuri Gustaf Erik Magnusson. Yhdysvaltalaiset everstit John Boyd ja John Warden III ovat uuden ajan ilmasotateoreetikkoja. Näiden henkilöiden tuottamien teorioiden avulla voidaan piirtää kuva muutoksesta, jota ilmasodankäynnin teoreetti- sessa ajattelussa on tapahtunut. Ilmavoimien johtamisjärjestelmän evoluutiolle haetaan vertailua kehityksestä, jota on tapahtunut Yhdysvalloissa, Isossa-Britanniassa ja Saksassa. Ilmavoimat on saanut vaikutteita muistakin maista, mutta näiden maiden kehityksen avulla voidaan selittää Suomessa tapahtunutta kehitystä. Tutkimuksessa osoitetaan, että kansainvälisellä johtamisjärjestelmäevoluutiolla on ollut merkittävä vaikutus suomalaiseen kehitykseen. Tämä tutkimus laajentaa prosessuaalista tutkimusteoriaa ja polkuriippuvuusmallin käyttöä sotatieteelliseen tutkimuskenttään. tutkimus yhdistää toisiinsa aivan uudella tavalla sotilasorganisaation institutionaalisia tekijöitä pitkässä evoluutioketjussa. Tutkimus luo pohjaa prosessuaaliseen, havaintoihin perustuvaan evoluutioajatteluun, jossa eri tekijöiden selitysmalleja ja kausaalisuutta eri periodien aikana voidaan kuvata. Tutkimuksen tuloksena ilmavoimien johtamisjärjestelmäevoluutiossa paljastui merkittäviä piirteitä. Teknologia on ollut voimakas katalysaattori ilmapuolustuksen evoluutiossa. Uusien teknologisten innovaatioiden ilmestyminen taistelukentälle on muuttanut oleellisesti taistelun kuvaa. Sodankäynnin revoluutiosta huolimatta sodankäynnin tai operaatiotaidon ja taktiikan perusperiaatteissa ei ole tapahtunut perustavanlaatuista muutosta. Ilmavoimien johtamisjärjestelmän kehitys on voimakkaasti linkittynyt ulkomaiseen johtamisjärjestelmäkehitykseen, jossa teknologiaimplementaatiot perustuvat usean eri ilmiön paljastumiseen ja hyväksikäyttöön. Sotilas- ja siviili-instituutiot ovat merkittävästi vaikuttaneet Ilmavoimien johtamisjärjestelmän kansalliseen kehitykseen. Ne ovat antaneet poliittisen ohjauksen, taloudellisten resurssien ja strategis-operatiivisten käskyjen ja suunnitelmien avulla perusteet, joiden pohjalta johtamisjärjestelmää on kehitetty. Tutkimus osoittaa, että Suomen taloudellisten resurssien rajallisuus on ollut merkittävin institutionaalinen rajoite Ilmavoimien johtamisjärjestelmää kehitettäessä. Useat poliittiset ohjausasiakirjat ovat korostaneet, ettei Suomella pienenä kansakuntana ole taloudellisia resursseja seurata kansainvälistä sotilasteknologiakehitystä. Lisäksi ulko- ja turvallisuuspoliittinen liikkumavapaus on vaikuttanut kehittämismahdollisuuksiin. Ilmasotateorian evoluutio on luonut johtamisjärjestelmän kehitykselle välttämättömän konseptuaalisen viitekehyksen, jotta ilmasota on voitu viedä käytännön tasolle. Teoria, doktriini ja instituutiot toimivat vuorovaikutuksessa, jossa ne interaktiivisesti vaikuttavat toinen toisiinsa. Tutkimus paljasti kuusi merkittävää sokkia, jotka saivat aikaan radikaaleja muutoksia johtamisjärjestelmän evoluutiopolulla. tutkimuksen perusteella vaikuttavimmat muutoksia aiheuttavat sokit olivat radikaalit turvallisuuspoliittiset muutokset kuten sota ja voimakkaat kansantalouden muutokset kuten lama. Sokkeja aiheuttaneet kuusi ajankohtaa olivat: 1. Puolustusvoimien rakentamisen aloittaminen vapaussodan jälkeen 1918 2. Maailmanlaajuinen lama 1929–1933 ja eurooppalainen rauhanaate 1928–1933 3. Talvi- ja jatkosota 1939–1944 4. Uusi alku Pariisin rauhansopimuksen 1947 ja YYA-sopimuksen 1948 varjossa 5. Kylmän sodan päättyminen ja Suomen lama 1990–1993 6. Maailmanlaajuinen lama 2008- Tutkimuksen perusteella voidaan todeta, että Suomen ilmavoimien johtamisjärjestelmän kehittäminen on perustunut rationaalisiin päätöksiin, jotka ovat saaneet vaikutteita ulkomaisesta ilmasotateorian ja -doktriinien kehityksestä sekä kansainvälisestä johtamisjärjestelmäkehityksestä. Johtamisjärjestelmän evoluutioon on vaikuttanut globaali konvergenssi, johon on tehty kansallisen tason ratkaisuja järjestelmien adaptaation ja implementaation yhteydessä.

Memristive Computing

Memristive computing refers to the utilization of the memristor, the fourth fundamental passive circuit element, in computational tasks. The existence of the memristor was theoretically predicted in 1971 by Leon O. Chua, but experimentally validated only in 2008 by HP Labs. A memristor is essentially a nonvolatile nanoscale programmable resistor — indeed, memory resistor — whose resistance, or memristance to be precise, is changed by applying a voltage across, or current through, the device. Memristive computing is a new area of research, and many of its fundamental questions still remain open. For example, it is yet unclear which applications would benefit the most from the inherent nonlinear dynamics of memristors. In any case, these dynamics should be exploited to allow memristors to perform computation in a natural way instead of attempting to emulate existing technologies such as CMOS logic. Examples of such methods of computation presented in this thesis are memristive stateful logic operations, memristive multiplication based on the translinear principle, and the exploitation of nonlinear dynamics to construct chaotic memristive circuits. This thesis considers memristive computing at various levels of abstraction. The first part of the thesis analyses the physical properties and the current-voltage behaviour of a single device. The middle part presents memristor programming methods, and describes microcircuits for logic and analog operations. The final chapters discuss memristive computing in largescale applications. In particular, cellular neural networks, and associative memory architectures are proposed as applications that significantly benefit from memristive implementation. The work presents several new results on memristor modeling and programming, memristive logic, analog arithmetic operations on memristors, and applications of memristors. The main conclusion of this thesis is that memristive computing will be advantageous in large-scale, highly parallel mixed-mode processing architectures. This can be justified by the following two arguments. First, since processing can be performed directly within memristive memory architectures, the required circuitry, processing time, and possibly also power consumption can be reduced compared to a conventional CMOS implementation. Second, intrachip communication can be naturally implemented by a memristive crossbar structure.

Subjectivity in the valuation : Case study on the Finnish biotechnology industry

The thesis combines valuation and behavioral economics literature, which is not common among the Finnish management accounting research. Furthermore, the valuation is studied in biotechnology context and those type of studies are rather rare as well. The thesis studies the valuation in the Finnish biotechnology industry. The concepts of behavioral finance are employed in the empirical part of the study to explore decision-makers’ behavior in valuation processes. The main interest of this study is to explore how subjectivity of a decision-maker affects the valuation in the biotechnology industry. The valuation is studied from two perspectives. First, what is the best valuation model for biotechnology companies suggested by the valuation literature? Second, how the valuation in biotechnology industry is done in practice and how the decision-makers subjectivity affects the valuation? The literature review aims at seeking the best valuation model. The real options were found to be the most suitable valuation model for biotechnology companies, especially in the early stages of product development. The real option’s ability to take the value of the inherent options into account results in theoretically most correct valuations. The only disadvantage is the model’s complexity when compared to other models, such as discounted cash flow models. The empirical part of the study consists of a case study, which examines the valuation practices of the Finnish biotechnology companies. When it comes to the valuation models used in practice, it was found that the companies were using rather simple valuation models, which was due to two reasons. First, the interviewees did not believe in the valuation models and second, they were familiar neither with the most sophisticated models nor with all the theoretical aspects of the models they were using. The material for the study was collected with theme interviews. Four CEO’s of highly successful Finnish biotechnology companies. Strong signs of the decision-makers’ subjectivity in valuation were observed. Most obvious were the signs of framing. Furthermore, herding, excessive optimism, and overconfidence were present. All the behavioral concepts observed most likely have a severe effect on the valuation. As a result, the valuation can easily become overly optimistic, which leads to overvalued investments and to continuation of already unprofitable projects. Framing had the strongest evidence. If the product being valued is framed successfully, the risk of overvaluation is high, thus a strong belief can justify almost any value.

Perspektivmöten i skola och handledning : lärares tankar om specialpedagogisk handledning

To create a more inclusive school, an increase in multidisciplinary cooperation is needed. One possible form of collaboration could encompass the special education teacher taking on the role of a consultant for other teachers in need of support in working with heterogeneous groups of pupils. Previous research shows that special education teachers see the role as consultant as diffuse and complex. The overarching aim of the present study involves deepening the knowledge on how consultation in a special educational context can be understood and developed based on teachers’ descriptions on this particular form of activity interpreted against various perspectives on consultation. The study is qualitative in nature and rests on a hermeneutic interpretive research tradition in combination with an abductive approach. The theoretical framework consists of two different approaches to consultation: the directive and the non-directive approach. The approaches differ regarding particular emphasis on advice and reflection during the consultation and with respect to who or what should be the focus of the consultation. The two approaches are here studied through various theories such as social learning theory, Bruner's theory of scaffolding, Roger’s humanist psychology, and constructivism. Semi-structured interviews were held with eighteen special education teachers (n=9) and class teachers (n=9) working in the compulsory school. The overall interpretation of the results shows that special education consultation can be understood as three different types of consultation. Consultation as counseling which harmonizes with the directive perspective on consultation is the most prominent type. In the consultation as counseling conversation, the special educational knowledge transfer is central and the focus is placed on the pupil. Although special education knowledge transfer emerges as a unique aspect of special education consultation, there are several inherent challenges in this type of consultation that can be addressed in that teachers also describe two other types of consultation. In the reflective consultation, there is a move away from the pupil focus and toward a focus on the class teacher and the use of reflection. The reflective consultation harmonizes with the non-directive approach to consultation. This type of consultation does not as of yet have a prominent place in the Finland-Swedish school context and at this stage it is not seen as a legitimate type of consultation according to the teachers’ descriptions. Despite this, certain aspects of the reflective conversation could be given more space in the development of consultation within special educational contexts. The co-operative consultation is characterized by the teachers acting as teammates and using professional exchange as a strategy for consultation. Both teachers' knowledge is seen as central, and rather than the special education teacher acting as the expert and moderator, the teachers control the consultation together and jointly move the work along. The co-operative consultation enables the focus to move from the pupil toward the context, which can lead to the development of inclusive practices. The results indicate that this type of consultation holds potential in the development of special educational consultation that takes place between equal colleagues. The co-operative consultation opens up for a third collaborative approach to consultation, where aspects of the directive and non-directive perspective can merge and develop. The thesis concludes with the proposal that special pedagogical consultation can be understood from an integrated perspective. The characteristics of the consultation can vary depending on the type of problem or situation, while co-operative consultation can be seen as the ideal as equal colleagues meet in consultation conversations. In order to develop the co-operative consultation, both teachers are required to have knowledge of consultation as a practice, to be part of a collaborative school climate, and that teachers are provided with enough time to take part in consultations.

Modeling and Control of the Power Conversion Unit in a Solid Oxide Fuel Cell Environment

In this doctoral thesis, a power conversion unit for a 10 kWsolid oxide fuel cell is modeled, and a suitable control system is designed. The need for research was identified based on an observation that there was no information available about the characteristics of the solid oxide fuel cell from the perspective of power electronics and the control system, and suitable control methods had not previously been studied in the literature. In addition, because of the digital implementation of the control system, the inherent characteristics of the digital system had to be taken into account in the characteristics of the solid oxide fuel cell (SOFC). The characteristics of the solid oxide fuel cell as well the methods for the modeling and control of the DC/DC converter and the grid converter are studied by a literature survey. Based on the survey, the characteristics of the SOFC as an electrical power source are identified, and a solution to the interfacing of the SOFC in distributed generation is proposed. A mathematical model of the power conversion unit is provided, and the control design for the DC/DC converter and the grid converter is made based on the proposed interfacing solution. The limit cycling phenomenon is identified as a source of low-frequency current ripple, which is found to be insignificant when connected to a grid-tied converter. A method to mitigate a second harmonic originating from the grid interface is proposed, and practical considerations of the operation with the solid oxide fuel cell plant are presented. At the theoretical level, the thesis discusses and summarizes the methods to successfully derive a model for a DC/DC converter, a grid converter, and a power conversion unit. The results of this doctoral thesis can also be used in other applications, and the models and methods can be adopted to similar applications such as photovoltaic systems. When comparing the results with the objectives of the doctoral thesis, we may conclude that the objectives set for the work are met. In this doctoral thesis, theoretical and practical guidelines are presented for the successful control design to connect a SOFC-based distributed generation plant to the utility grid.

Kytkentäaineet puumuovikomposiiteissa

Puumuovikomposiittien valmistuksessa yhdistetään kaksi toisistaan eroavaa materiaalia jolloin saadaan aikaan materiaalien ominaisuuksien ainutlaatuinen yhdistelmä. Polymeerimateriaaleina käytetään pääasiassa erilaisia kestomuoveja. Kuitumateriaaleina voidaan käyttää puujauhetta, sahanpurua, paperin- ja kartongin valmistuksessa käytettävää sellua, nanoselluloosaa tai muita puukuitumateriaaleja. Polaarisen puukuidun ja polaarittoman muovimateriaalin välinen materiaalien rajapinnan adheesio on yleensä riittämätöntä, mikä vaikuttaa lopputuotteen ominaisuuksien heikkenemiseen. Kyseinen ongelma on pyritty ratkaisemaan käyttämällä erilaisia kytkentäaineita. Tässä työssä keskitytään käsittelemään erilaisia puumuovikomposiittien kytkentäaineita, niiden toimintaa sekä vaikutuksia lopputuotteeseen. Lisäksi työssä esitellään myös puumuovikomposiittien valmistusmateriaaleja ja valmistusprosesseja.

Conceptions of mathematics teacher education : thoughts among teacher educators in Tanzania

This study addresses the question of teacher educators’ conceptions of mathematics teacher education (MTE) in teacher colleges in Tanzania, and their thoughts on how to further develop it. The tension between exponents of content as opposed to pedagogy has continued to cause challenging conceptual differences, which also influences what teacher educators conceive as desirable in the development of this domain. This tension is connected to the dissatisfaction of parents and teachers with the failure of school mathematics. From this point of view, the overall aim was to identify and describe teacher educators’ various conceptions of MTE. Inspired by the debate among teacher educators about what the balance should be between subject matter and pedagogical knowledge, it was important to look at the theoretical faces of MTE. The theoretical background involved the review of what is visible in MTE, what is yet to be known and the challenges within the practice. This task revealed meanings, perspectives in MTE, professional development and assessment. To do this, two questions were asked, to which no clear solutions satisfactorily existed. The questions to guide the investigation were, firstly, what are teacher educators’ conceptions of MTE, and secondly, what are teacher educators’ thoughts on the development of MTE? The two questions led to the choice of phenomenography as the methodological approach. Against the guiding questions, 27 mathematics teacher educators were interviewed in relation to the first question, while 32 responded to an open-ended questionnaire regarding question two. The interview statements as well as the questionnaire responses were coded and analysed (classified). The process of classification generated patterns of qualitatively different ways of seeing MTE. The results indicate that MTE is conceived as a process of learning through investigation, fostering inspiration, an approach to learning with an emphasis on problem solving, and a focus on pedagogical knowledge and skills in the process of teaching and learning. In addition, the teaching and learning of mathematics is seen as subject didactics with a focus on subject matter and as an organized integration of subject matter, pedagogical knowledge and some school practice; and also as academic content knowledge in which assessment is inherent. The respondents also saw the need to build learner-educator relationships. Finally, they emphasized taking advantage of teacher educators’ neighbourhood learning groups, networking and collaboration as sustainable knowledge and skills sharing strategies in professional development. Regarding desirable development, teacher educators’ thoughts emphasised enhancing pedagogical knowledge and subject matter, and to be determined by them as opposed to conventional top-down seminars and workshops. This study has revealed various conceptions and thoughts about MTE based on teacher educators´ diverse history of professional development in mathematics. It has been reasonably substantiated that some teacher educators teach school mathematics in the name of MTE, hardly distinguishing between the role and purpose of the two in developing a mathematics teacher. What teacher educators conceive as MTE and what they do regarding the education of teachers of mathematics revealed variations in terms of seeing the phenomenon of interest. Within limits, desirable thoughts shed light on solutions to phobias, and in the same way low self-esteem and stigmatization call for the building of teacher educator-student teacher relationships.

The sources of complementary competitive advantages for systems’ manufacturers in the aircraft modernization market

Being a top of high technology industries, the aerospace represents one of the most complex fields of study. While the competitiveness of aircraft systems’ manufacturers attracts a significant number of researchers, some of the issues remain to be a blank spot. One of those is the after-sale modernization. The master thesis investigates how this concept is related to the theory of competitive advantages. Finding the routes in the framework of complex technological systems’ lifecycle, the key drivers of the aircraft modernization market are revealed. The competitive positioning of players is defined through multiple case studies in a form of several in-depth interviews. The key result of the research is the conclusion that modernization should be considered as an inherent component of strategy of any aircraft systems’ manufacturer, while the master thesis aims to support managerial decision making.

Macroscopic description of the external and middle ear of paca (Cuniculus paca Linnaeus, 1766)

Abstract: Paca (Cuniculus paca), one of the largest rodents of the Brazilian fauna, has inherent characteristics of its species which can conribute as a new option for animal experimantation. As there is a growing demand for suitable experimental models in audiologic and otologic surgical research, the gross anatomy and ultrastructural ear of this rodent have been analyzed and described in detail. Fifteen adult pacas from the Wild Animals Sector herd of Faculdade de Ciências Agrárias e Veterinárias, Unesp-Jaboticabal, were used in this study. After anesthesia and euthanasia, we evaluated the entire composition of the external ear, registering and ddescribing the details; the temporal region was often dissected for a better view and detailing of the tympanic bulla which was removed and opened to expose the ear structures analyzed mascroscopically and ultrastructurally. The ear pinna has a triangular and concave shape with irregular ridges and sharp apex. The external auditory canal is winding in its path to the tympanic mebrane. The tympanic bulla is is on the back-bottom of the skull. The middle ear is formed by a cavity region filled with bone and membranous structures bounded by the tympanic membrane and the oval and round windows. The tympanic membrane is flat and seals the ear canal. The anatomy of the paca ear is similar to the guinea pig and from the viewpoint of experimental model has major advantages compared with the mouse ear.

Use of herbicides on turfgrass

In crop production, weeds must be controlled so as not to adversely affect crop yield and crop quality. Thus, a low level of weeds infesting a field, in most instances, is not a problem. Except in sod or seed production, turfgrass does not have a yield component. The value of turfgrass is its inherent aesthetic quality and usability. Aesthetic quality is the beauty and value that turfgrass adds to a managed landscape. Usability can be the durability of a sport field, trueness of golf putting green roll, or reduction in soil loss from water runoff or wind. Any weed presence in turfgrass can decrease the aesthetic quality and usability of turfgrass. Utilizing herbicides is the only way to completely control weeds in a turfgrass stand. While it is possible to reduce weed populations using cultural or mechanical management practices, it is impossible to completely eliminate weeds as can be accomplished with herbicides. This manuscript will review the major herbicides used in turfgrass in the United States with respect to their modes of action, herbicide family, and primary use in turfgrass.

Modal testing and numerical modeling of the dynamic properties of layered sheet-steel structure

Recently, due to the increasing total construction and transportation cost and difficulties associated with handling massive structural components or assemblies, there has been increasing financial pressure to reduce structural weight. Furthermore, advances in material technology coupled with continuing advances in design tools and techniques have encouraged engineers to vary and combine materials, offering new opportunities to reduce the weight of mechanical structures. These new lower mass systems, however, are more susceptible to inherent imbalances, a weakness that can result in higher shock and harmonic resonances which leads to poor structural dynamic performances. The objective of this thesis is the modeling of layered sheet steel elements, to accurately predict dynamic performance. During the development of the layered sheet steel model, the numerical modeling approach, the Finite Element Analysis and the Experimental Modal Analysis are applied in building a modal model of the layered sheet steel elements. Furthermore, in view of getting a better understanding of the dynamic behavior of layered sheet steel, several binding methods have been studied to understand and demonstrate how a binding method affects the dynamic behavior of layered sheet steel elements when compared to single homogeneous steel plate. Based on the developed layered sheet steel model, the dynamic behavior of a lightweight wheel structure to be used as the structure for the stator of an outer rotor Direct-Drive Permanent Magnet Synchronous Generator designed for high-power wind turbines is studied.

Application of Carbon Nanotubes in Rotating Electrical Machines

Demand for increased energy efficiency has put an immense need for novel energy efficient systems. Electrical machines are considered as a much matured technology. Further improvement in this technology needs of finding new material to incorporate in electrical machines. Progress of carbon nanotubes research over the latest decade can open a new horizon in this aspect. Commonly known as ‘magic material’, carbon nanotubes (CNTs) have promising material properties that can change considerably the course of electrical machine design. It is believed that winding material based on carbon nanotubes create the biggest hope for a giant leap of modern technology and energy efficient systems. Though carbon nanotubes (CNTs) have shown amazing properties theoretically and practically during the latest 20 years, to the best knowledge of the author, no research has been carried out to find the future possibilities of utilizing carbon nanotubes as conductors in rotating electrical machines. In this thesis, the possibilities of utilizing carbon nanotubes in electrical machines have been studied. The design changes of electrical machine upon using carbon nanotubes instead of copper have been discussed vividly. A roadmap for this carbon nanotube winding machine has been discussed from synthesis, manufacturing and operational points of view.

Lipase and omega-transaminase catalysis in preparation of alcohol and amine enantiomers

Enantiopure intermediates are of high value in drug synthesis. Biocatalysis alone or combined with chemical synthesis provides powerful tools to access enantiopure compounds. In biocatalysis, chemo-, regio- and enantioselectivity of enzymes are combined with their inherent environmentally benign nature. Enzymes can be applied in versatile chemical reactions with non-natural substrates under synthesis conditions. Immobilization of an enzyme is a crucial part of an efficient biocatalytic synthesis method. Successful immobilization enhances the catalytic performance of an enzyme and enables its reuse in successive reactions. This thesis demonstrates the feasibility of biocatalysis in the preparation of enantiopure secondary alcohols and primary amines. Viability and synthetic usability of the studied biocatalytic methods have been addressed throughout this thesis. Candida antarctica lipase B (CAL-B) catalyzed enantioselective O-acylation of racemic secondary alcohols was successfully incorporated with in situ racemization in the dynamic kinetic resolution, affording the (R)-esters in high yields and enantiopurities. Side reactions causing decrease in yield and enantiopurity were suppressed. CAL-B was also utilized in the solvent-free kinetic resolution of racemic primary amines. This method produced the enantiomers as (R)-amides and (S)-amines under ambient conditions. An in-house sol-gel entrapment increased the reusability of CAL-B. Arthrobacter sp. omega-transaminase was entrapped in sol-gel matrices to obtain a reusable catalyst for the preparation enantiopure primary amines in an aqueous medium. The obtained heterogeneous omega-transaminase catalyst enabled the enantiomeric enrichment of the racemic amines to their (S)-enantiomers. The synthetic usability of the sol-gel catalyst was demonstrated in five successive preparative kinetic resolutions.

Näyttelijän taide venäläisessä elokuvassa 1907-1919

Väitöskirjan aihe on, kuinka elokuvanäyttelijän taide ja sitä koskeva ajattelu kehittyivät Venäjällä yksityisen elokuvatuotannon vuosina 1907–1919. Tutkimus kuuluu kulttuurihistorian alaan. Sen näkökulma on elokuvan esteettinen historia, ja tutkimus liittyy ns. revisionistisen elokuvahistorian pyrkimykseen arvioida uudelleen näytelmäelokuvan varhaisvaiheita. Analyysi kohdistuu esteettiseen aikalaisajatteluun sekä elokuvatuotannon käytäntöihin ja prosesseihin. Lähteinä on käytetty elokuvanäyttelemistä koskevaa julkista keskustelua, elokuvantekijöiden jättämää muistietoa ja ajalta säilyneitä elokuvia. Käsittely jakautuu kolmeen väljän kronologisesti järjestettyyn lukuun. Luku 2 keskittyy venäläisen fiktioelokuvan varhaisvuosiin 1910-luvun taitteen molemmin puolin. Luku 3 käsittelee pitkän näytelmäelokuvan läpimurrosta alkunsa saanutta keskustelua psykologisesta elokuvasta. Luku 4 etenee maailmansodan vuosina nouseen kuvallisen, ohjaajakeskeisen elokuvakäsityksen kautta kohti varhaisen neuvostoelokuvan ajatusta näyttelijästä ”mallina”. Väitöskirjassa esitetään, että käsitys näyttelemisestä, ja sitä myötä elokuvasta yleensä, kävi tutkittuna ajanjaksona läpi kehämäisen kehityksen, jossa vuorottelivat käsitykset elokuvasta modernina ja elokuvasta traditiona. Tutkimus problematisoi myöhempää elokuvakäsitystä, jonka mukaan elokuvaestetiikan perusyksikkö on otos. Toisin kuin myöhempinä vuosikymmeninä 1910-luvulla näytteleminen oli avainkysymys, jonka kautta lähestyttiin elokuvan olemusta itseään. Venäjällä ajatukset elokuvanäyttelemisestä kehittyivät vuorovaikutuksessa saman ajan teatteriestetiikan kanssa, joskin elokuva miellettiin jo varhain erilliseksi taidemuodoksi. Tsaarinajan elokuvan vaikutusvaltaisimmaksi esteettiseksi ohjelmaksi muodostui psykologinen elokuva, jonka inspiraationa toimi osittain Konstantin Stanislavskin samaan aikaan kehittämä näyttelijäntyön järjestelmä. Elävä näyttelijä ja näyttelijän ”kokeminen” nähtiin ratkaisuna elokuvavälineen keskeisenä ongelmana pidettyyn mekaanisuuteen. Ajan studiokäytännöissä psykologinen lähestymistapa puolestaan merkitsi usein vastausten etsimistä teollisen elokuvatuotannon olosuhteista syntyneisiin ongelmiin.