Visual rehabilitation in low-moderate keratoconus : intracorneal ring segment implantation followed by same-day topography-guided photorefractive keratectomy and collagen cross linking

AIM: To present the results of same-day topography-guided photorefractive keratectomy (TG-PRK) and corneal collagen crosslinking (CXL) after previous intrastromal corneal ring segment (ISCR) implantation for keratoconus. METHODS: An experimental clinical study on twenty-one eyes of 19 patients aged, 27.1±6.6 years (range: 19 – 43 years), with low to moderate keratoconus who were selected to undergo customized TG-PRK immediately followed by same-day CXL, 9 months after ISCR implantation in a university ophthalmology clinic. Refraction, uncorrected (UDVA) and corrected distance visual acuities (CDVA), keratometry (K) values, central corneal thickness (CCT) and coma were assessed 3 months after TG/PRK and CXL. RESULTS: After TG-PRK/CXL: the mean UDVA (logMAR) improved significantly from 0.66±0.41 to 0.20±0.25 (P<0.05); K flat value decreased from: 48.44±3.66 D to 43.71±1.95 D; K steep value decreased from 45.61±2.40 D to 41.56±2.05D; K average also decreased from 42.42±2.07 D to 47.00±2.66 D (P<0.05 for all). The mean sphere and cylinder decreased significantly post-surgery from, -3.10±2.99 D to -0.11±0.93 D and from, -3.68±1.53 to -1.11±0.75D respectively, while the CDVA, CCT and coma showed no significant changes. Compared to post-ISCR, significant reductions (P ˂ 0.05 or all) in all K-values, sphere and cylinder were observed after TG-PRK/CXL. CONCLUSION: Same-day combined topography-guided PRK and corneal crosslinking following placement of ICRS is a safe and potentially effective option in treating low-moderate keratoconus. It significantly improved all visual acuity, reduced keratometry, sphere and astigmatism, but caused no change in central corneal thickness and coma.

Natural convection heat transfer in a baffled triangular enclosure

To reduce the natural convection heat loss from enclosures many researchers used convection suppression devices in the past. In this study a single baffle is used under the top tip to investigate numerically the natural convection heat loss in an attic shaped enclosure which is a cost effective approach. The case considered here is one inclined wall of the enclosure is uniformly heated while the other inclined wall is uniformly cooled with adiabatic bottom wall. The finite volume method has been used to discretize the governing equations, with the QUICK scheme approximating the advection term. The diffusion terms are discretized using central-differencing with second order accuracy. A wide range of governing parameters are studied (Rayleigh number, aspect ratio, baffle length etc.). It is observed that the heat transfer due to natural convection in the enclosure reduces when the baffle length is increased. Effects of other parameters on heat transfer and flow field are described in this study.

Navigating pathways for academic staff development : implications for institutions and academic ranks

BACKGROUND As engineering schools adopt outcomes - focused learning approaches in response to government expectations and industry requirements of graduates capable of learning and applying knowledge in different contexts, university academics must be capable of developing and delivering programs that meet these requirements. Those academics are increasingly facing challenges in progressing their research and also acquiring different skill sets to meet the learning and teaching requirements. PURPOSE The goal of this study was to identify the types of development and support structures in place for academic staff, especially early career ones, and examine how the type of institution and the rank or role of the staff member affects these structures. DESIGN/METHOD We conducted semi - structured interviews with 21 individuals in a range of positions pertaining to teaching and learning in engineering education. Open coding was used to identify main themes from the guiding questions raised in the interviews and refined to address themes relevant to the development of institutional staff . The interview data was then analysed based on the type of institution and the rank/ role of the participant. RESULTS While development programs that focus on improving teaching and learning are available, the approach on using these types of programs differed based on staff perspective. Fewer academics, regardless of rank/role, had knowledge of support structures related to other areas of scholarship, e.g. disciplinary research, educational research, learning the institutional culture. The type of institution also impacted how they weighted and encouraged multiple forms of scholarship. We found that academic staff holding higher ranking positions, e.g. dean or associate dean, were not only concerned with the success of their respective programs, but also in how to promote other academic staff participation throughout the process. CONCLUSIONS The findings from this stud y extend the premise that developing effective academic staff ultimately leads to more effective institutions and successful graduates and accomplishing this requires staff buy - in at multiple stages of instructional and program development. Staff and administration developing approaches for educational innovation together (Besterfield - Sacre et al., 2014) and getting buy - in from all academic staff to invest in engineering education development will ultimately lead to more successful engineering graduates.

Teaching and assessment of prescribing medicines : how does pharmacy perform?

BACKGROUND Prescribing is a complex task, requiring specific knowledge and skills combined with effective, context-specific clinical reasoning. Prescribing errors can result in significant morbidity and mortality. For all professions with prescribing rights, a clear need exists to ensure students graduate with a well-defined set of prescribing skills, which will contribute to competent prescribing. AIM To describe the methods employed to teach and assess the principles of effective prescribing across five non-medical professions at Queensland University of Technology. METHOD The NPS National Prescribing Competencies Framework (PCF) was used as the prescribing standard. A curriculum mapping exercise was undertaken to determine how well the PCF was addressed across the disciplines of paramedic science, pharmacy, podiatry, nurse practitioner and optometry. Identified gaps in teaching and/or assessment were noted. RESULTS Prescribing skills and knowledge are taught and assessed using a range of methods across disciplines. A multi-modal approach is employed by all disciplines. The Pharmacy discipline uses more tutorial sessions to teach prescribing principles and relies less on case studies and clinical appraisal to assess prescribing when compared to other disciplines. Within the pharmacy discipline approximately 90% of the PCF competencies are taught and assessed. This compares favourably with the other disciplines. CONCLUSION Further work is required to establish a practical, effective approach to the assessment of prescribing competence especially between the university and clinical settings. Effective and reliable assessment of prescribing undertaken by students in diverse settings remains challenging.

Injection velocity control of thermoplastic injection molding via a double controller scheme

Injection velocity has been recognized as a key variable in thermoplastic injection molding. Its closed-loop control is, however, difficult due to the complexity of the process dynamic characteristics. The basic requirements of the control system include tracking of a pre-determined injection velocity curve defined in a profile, load rejection and robustness. It is difficult for a conventional control scheme to meet all these requirements. Injection velocity dynamics are first analyzed in this paper. Then a novel double-controller scheme is adopted for the injection velocity control. This scheme allows an independent design of set-point tracking and load rejection and has good system robustness. The implementation of the double-controller scheme for injection velocity control is discussed. Special techniques such as profile transformation and shifting are also introduced to improve the velocity responses. The proposed velocity control has been experimentally demonstrated to be effective for a wide range of processing conditions.

Effects of clear-fell harvest on bat home range.

We investigated effects of roost loss due to clear-fell harvest on bat home range. The study took place in plantation forest, inhabited by the New Zealand long-tailed bat (Chalinolobus tuberculatus), in which trees are harvested between the ages 26-32 years. We determined home ranges by radiotracking different bats in areas that had and had not been recently clear-fell harvested. Home ranges were smaller in areas that had been harvested. Adult male bats selected 20-25 year old stands within home ranges before and after harvest. Males selected edges with open unplanted areas when harvest had not occurred but no longer selected these at proportions greater than their availability post harvest, probably because they were then readily available. This is the first radiotracking study to demonstrate a change in home range size and selection concomitant with felling of large areas of plantation forest, and thus quantify negative effects of forestry operations on this speciose group. The use of smaller home ranges post-harvest may reflect smaller colony sizes and lower roost availability, both of which may increase isolation of colonies and vulnerability to local extinction.

Is lek breeding rare in bats?

Bats (Mammalia: Chiroptera) are among the most successful mammals and likely display the widest range of mating systems within the Class. One mating system that is underrepresented in the Chiroptera is lek breeding, which is characterized by aggregations of sexually displaying males that are visited by receptive females who appraise male displays and actively choose mates, yet receive no direct benefits such as assistance in parenting. Leks are thought to form when males can defend neither resources nor females, making it more economical to establish small breeding territories and self-advertise through sexual displays. Lekking is rare in mammals, and it has been suggested that a lack in the mobility required by females to economically seek out aggregations of sexually displaying males may explain this rarity. Bats, like birds, do not suffer reduced mobility and yet out of over a thousand described species, only one has been confirmed to breed in leks. We examine the rarity of lekking in bats by providing an overview on the current state of knowledge of their mating systems and discuss the ecological and social determinants for the observed trends, contrasted with the prerequisites of lek-breeding behaviour. We use the breeding behaviour of New Zealand's lesser short-tailed bat Mystacina tuberculata, which is believed to be a lek breeder, as a case study for the examination of potential lekking behaviour in bats, and highlight the importance of such research for the development of effective conservation strategies.

Home range and habitat selection by a threatened bat in exotic plantation forest

Individuals' home ranges are constrained by resource distribution and density, population size, and energetic requirements. Consequently, home ranges and habitat selection may vary between individuals of different sex and reproductive conditions. Whilst home ranges of bats are well-studied in native habitats, they are often not well understood in modified landscapes, particularly exotic plantation forests. Although Chalinolobus tuberculatus (Vespertilionidae, Chiroptera) are present in plantation forests throughout New Zealand their home ranges have only been studied in native forest and forest-agricultural mosaic and no studies of habitat selection that included males had occurred in any habitat type. Therefore, we investigated C. tuberculatus home range and habitat selection within exotic plantation forest. Home range sizes did not differ between bats of different reproductive states. Bats selected home ranges with higher proportions of relatively old forest than was available. Males selected edges with open unplanted areas within their home ranges, which females avoided. We suggest males use these edges, highly profitable foraging areas with early evening peaks in invertebrate abundance, to maintain relatively low energetic demands. Females require longer periods of invertebrate activity to fulfil their needs so select older stands for foraging, where invertebrate activity is higher. These results highlight additional understanding gained when data are not pooled across sexes. Mitigation for harvest operations could include ensuring that areas suitable for foraging and roosting are located within a radius equal to the home range of this bat species.

Finite element analysis of CFRP strengthened steel hollow sections under tension

This paper presents a nonlinear finite element (FE) model for the analysis of very high strength (VHS) steel hollow sections wrapped by high modulus carbon fibre rein forced polymer (CFRP) sheets. The bond strength of CFRP wrapped VHS circular steel hollow section under tension is investigated using the FE model. The three dimensional FE model by Nonlinear static analysis has been carried out by Strand 7 finite element software. The model is validated by the experimental data obtained from Fawzia et al [1]. A detail parametric study has been performed to examine the effect of number of CFRP layers, different diameters of VHS steel tube and different bond lengths of CFRP sheet. The analytical model developed by Fawzia et al. [1] has been used to determine the load carrying capacity of different diameters of CFRP strengthened VHS steel tube by using the capacity from each layer of CFRP sheet. The results from FE model have found in reasonable agreement with the analytical model developed by Fawzia et al [1]. This validation was necessary because the analytical model by Fawzia et al [1] was developed by using only one diameter of VHS steel tube and fixed (five) number of CFRP layers. It can be concluded that the developed analytical model is valid for CFRP strengthened VHS steel tubes with diameter range of 38mm to 100mm and CFRP layer range of 3 to 5 layers. Based on the results it can also be concluded that the effective bond length is consistent for different diameters of steel tubes and different layers of CFRP. Three layers of CFRP is considered most effective wrapping scheme due to the cost effectiveness. Finally the distribution of longitudinal and hoop stress has been determined by the finite element model for different diameters of CFRP strengthened VHS steel tube.

Mentoring for Effective Teaching (MET)

The Mentoring for Effective Teaching (MET) program aims to facilitate understandings and skills for advancing mentoring and teaching practices for preservice teachers. The paper outlines the key findings from the MET program, including findings related to: (1) the mentor-mentee relationship, (2), mentoring pedagogical knowledge practices, and; (3) providing feedback to the mentee. Each part of the paper presents a model synthesised from the research, which can be used as a visual guide for faciltiating effective mentoring practices.

Mentor feedback : models, viewpoints and strategies

A mentor’s feedback can present professional insights to allow a mentee to reflect and develop practice. This paper positions two models for feedback that have emanated from empirical studies. It also demonstrates the diverse viewpoints of mentors and suggests strategies for providing quality feedback. In one qualitative study, 24 mentors observed a final-year preservice teacher through a professionally video-recorded lesson and wrote their observations towards giving feedback to the potential mentee. Tables illustrated in the paper, show that mentors’ positive feedback and constructive criticisms vary considerably on the same observed events. Data from this study were synthesised to posit a theoretical model for analysing mentor feedback in an interconnected, three-way Venn diagram, namely: visual, auditory and conceptual frames. Another study (n=28), which is a collection of mentor teachers’ work samples during the Mentoring for Effective Teaching (MET) program, provides strategies within six feedback practices, that is: (1) negotiated mentor-mentee expectations for providing feedback on practices, (2) reviewing teaching plans, (3) arranging for observations of practices, (4) providing oral feedback, (5) providing written feedback, and; (6) presenting opportunities for the mentee to evaluate teaching practices with consideration of the mentor’s feedback. For example, on the last mentioned practice (6) there were strategies such as “Plan a time for evaluation of practices (guided reflection)”, “Read the mentee’s reflection on practice and discuss how it aligns with your observations of their practices”, and “Highlight verbally and/or in writing where the mentee is perceptive about the reflection and how the reflection could be enhanced for future evaluations”. Developing a range of strategies that may assist the mentee in professional growth, include enlisting a community of mentors, ensuring mentors have a repertoire of strategies for articulating feedback, and using mentor feedback tools and models. This study has implications for the development of feedback models and strategies.

Long-range stereo visual odometry for unmanned aerial vehicles

This thesis explored the utility of long-range stereo visual odometry for application on Unmanned Aerial Vehicles. Novel parameterisations and initialisation routines were developed for the long-range case of stereo visual odometry and new optimisation techniques were implemented to improve the robustness of visual odometry in this difficult scenario. In doing so, the applications of stereo visual odometry were expanded and shown to perform adequately in situations that were previously unworkable.

Effective public speaking for the Australian curriculum

Public speaking has been with us since the great orators of the cultural heritage tradition and is by no means a dying art. There is no substitute for the human voice in real time, and technology-delivered speeches cannot really move an audience in precisely ways that effective, live speaking can. Many teachers go to history to access models such as the great Martin Luther King’s “I have a dream” speech, or Winston Churchill’s call to battle. Most of us can recall Kevin Rudd’s historical apology to Indigenous Australia’s stolen generation, and more recently Noel Pearson’s moving eulogy delivered to a mourners at Gough Whitlam’s funeral. We are fortunate now to be able to access speeches from more recent history, closer to home and in our own accents through online repositories. This paper is, in part, written as a guide for pre-service teachers who did not learn this at school, and experienced teachers may also find it useful.

Opportunities and challenges in engaging citizens in the co-production of infrastructure-based public services in Australia

Research and practice have observed a shift towards service-oriented approaches that depend on input from citizens as co-producers of services. Yet in the delivery of public infrastructure the focus is still on managing assets rather than services. Using a Policy Delphi approach, we found that although experts advocate service-centric approaches guidelines and policies lack a service-centric perspective. Findings revealed a range of impediments to effective stakeholder involvement. The paper contributes to co-production and new public governance literature and offers directions for public infrastructure decision-makers to support and reconnect disengaged government–citizen relations, and determine ways of understanding optimal service outcomes.

The long-term health consequences of child physical abuse, emotional abuse, and neglect : a systematic review and meta-analysis

Background Child sexual abuse is considered a modifiable risk factor for mental disorders across the life course. However the long-term consequences of other forms of child maltreatment have not yet been systematically examined. The aim of this study was to summarise the evidence relating to the possible relationship between child physical abuse, emotional abuse, and neglect, and subsequent mental and physical health outcomes. Methods and Findings A systematic review was conducted using the Medline, EMBASE, and PsycINFO electronic databases up to 26 June 2012. Published cohort, cross-sectional, and case-control studies that examined non-sexual child maltreatment as a risk factor for loss of health were included. All meta-analyses were based on quality-effects models. Out of 285 articles assessed for eligibility, 124 studies satisfied the pre-determined inclusion criteria for meta-analysis. Statistically significant associations were observed between physical abuse, emotional abuse, and neglect and depressive disorders (physical abuse [odds ratio (OR) = 1.54; 95% CI 1.16–2.04], emotional abuse [OR = 3.06; 95% CI 2.43–3.85], and neglect [OR = 2.11; 95% CI 1.61–2.77]); drug use (physical abuse [OR = 1.92; 95% CI 1.67–2.20], emotional abuse [OR = 1.41; 95% CI 1.11–1.79], and neglect [OR = 1.36; 95% CI 1.21–1.54]); suicide attempts (physical abuse [OR = 3.40; 95% CI 2.17–5.32], emotional abuse [OR = 3.37; 95% CI 2.44–4.67], and neglect [OR = 1.95; 95% CI 1.13–3.37]); and sexually transmitted infections and risky sexual behaviour (physical abuse [OR = 1.78; 95% CI 1.50–2.10], emotional abuse [OR = 1.75; 95% CI 1.49–2.04], and neglect [OR = 1.57; 95% CI 1.39–1.78]). Evidence for causality was assessed using Bradford Hill criteria. While suggestive evidence exists for a relationship between maltreatment and chronic diseases and lifestyle risk factors, more research is required to confirm these relationships. Conclusions This overview of the evidence suggests a causal relationship between non-sexual child maltreatment and a range of mental disorders, drug use, suicide attempts, sexually transmitted infections, and risky sexual behaviour. All forms of child maltreatment should be considered important risks to health with a sizeable impact on major contributors to the burden of disease in all parts of the world. The awareness of the serious long-term consequences of child maltreatment should encourage better identification of those at risk and the development of effective interventions to protect children from violence.