Análise de trilha da contaminação por aflatoxinas em grãos de milho armazenados

O objetivo deste trabalho foi determinar a magnitude dos efeitos diretos e indiretos de parâmetros físico-químicos e microbiológicos sobre a ocorrência de aflatoxinas em grãos de milho armazenados, por meio da análise de trilha. Os dados foram coletados em dois experimentos: um cultivo de inverno (colheita do milho em julho de 2012) e um cultivo de verão (colheita em fevereiro de 2013). Os grãos foram armazenados por 12 meses, em dois tipos de acondicionamentos: em sacarias convencionais de polipropileno e a granel em silo metálico. Avaliaram-se 14 características dos grãos. Calculou-se a matriz de correlações de Pearson entre todos os parâmetros, realizou-se o diagnóstico de multicolinearidade e, posteriormente, aplicou-se a análise de trilha com regressão em crista. Observou-se forte influência das condições ambientais entre as safras de inverno e de verão, e entre época e tipo de armazenagem, nos coeficientes de análise de trilha. As variáveis teor de umidade, conteúdo de cinzas, proteínas, lipídios, grãos sem defeitos, massa volumétrica, incidência de Penicillium sp., Aspergillus sp. e Fusarium sp. devem ser consideradas conjuntamente na definição da possibilidade de ocorrência de aflatoxinas na massa de grãos armazenados.

Contaminación de suelos y aguas subterráneas por vertidos industriales

En los países industrializados, la contaminación de suelos y aguas subterráneas por el vertido incontrolado de residuos industriales es uno de los problemas más preocupantes que se plantean, ya que su eliminación no es fácil ni barata de realizar, y sus efectos persisten durante muchos años. En España este problema es especialmente notorio a causa de una gestión inadecuada derivada de la descoordinación existente entre los diferentes sectores involucrados: administración, empresas, técnicos y científicos. La ausencia de instalaciones suficientes para su tratamiento, ha llevado a la práctica de vertidos en los cauces de ríos y en el subsuelo o a su almacenamiento en vertederos incontrolados...

Clorofila e carotenoides em maracujazeiro-amarelo irrigado com águas salinas no solo com biofertilizante bovino

Os efeitos deletérios provocados pelo estresse salino resultam em modificações nos mecanismos bioquímicos e fisiológicos das plantas, alterando, dentre outros, os teores foliares de clorofila e carotenoides, comprometendo a atividade fotossintética e, consequentemente, o crescimento, o desenvolvimento, a produção e a adaptabilidade aos ambientes adversos. O objetivo do trabalho foi avaliar os efeitos de diferentes condutividades elétricas da água de irrigação (CEai), associadas às épocas de aplicação de biofertilizante, sobre os teores de pigmentos fotossintéticos para a determinação dos pigmentos cloroplastídicos (clorofila a, b, total e carotenoides) do maracujazeiro-amarelo. Os tratamentos foram distribuídos em arranjo fatorial 5 x 4, referentes aos valores de CEai: 0,5; 1,5; 2,5; 3,5 e 4,5 dS m-1, em quatro épocas de aplicação do biofertilizante: sem biofertilizante (SB); aplicação uma semana antes do transplantio (1SAT); a cada 90 dias, a partir do transplantio (90DAT); uma semana antes e a cada 90 dias, após o transplantio (1SAT+90DAT). O aumento da concentração salina da água de irrigação reduziu a eficiência fotossintética nas folhas do maracujazeiro-amarelo, sendo mais drástico na condutividade superior a 2,5 dS m-1. As frequências de aplicação do biofertilizante não influenciaram nas concentrações dos pigmentos fotossintéticos.

Compatibilidade entre acaricidas e fertilizantes foliares em função de diferentes águas no controle do ácaro da leprose dos citros Brevipalpus phoenicis

A adição de fertilizantes foliares à calda acaricida é frequentemente empregada na citricultura com o intuito de reduzir os custos das aplicações. Todavia, as implicações desta prática, na maioria dos casos, são desconhecidas. O objetivo do trabalho foi avaliar o efeito de caldas acaricidas em mistura com fertilizantes foliares e preparadas com diferentes águas no controle do ácaro B. phoenicis. Foram realizados dois experimentos em laboratório, nos anos de 2009 e 2010, utilizando-se de frutos de laranja para conter ácaros Brevipalpus phoenicis. Um dos experimentos constou de três bioensaios, nos quais se procurou verificar o efeito das misturas entre fertilizantes foliares e os acaricidas cyhexatin, propargite e acrinatrhrin sobre B. phoenicis. No outro experimento, além de verificar o efeito das misturas de fertilizantes com os acaricidas propargite e acrinatrhrin, buscou-se também avaliar o efeito de águas coletadas em diferentes fontes utilizadas no preparo das caldas sobre B. phoenicis. Os resultados evidenciaram que a aplicação dos fertilizantes foliares cloreto de zinco, cloreto de manganês, ureia e a mistura de fosfito de potássio + ureia + cloreto de zinco não afetaram a ação dos acaricidas cyhexatin, propargite e acrinathrin sobre o controle de B. phoenicis. As misturas dos cloretos de zinco e de manganês com o sulfato de magnésio e a adição de fosfito de potássio diminuíram a eficiência dos acaricidas propargite e acrinathrin, não devendo, a princípio, ser adicionadas numa mesma aplicação. Águas provenientes dos municípios paulistas de Itápolis, Pirangi e Pirassununga interferiram na ação dos acaricidas propargite e acrinathin sobre B. phoenicis, sendo que a água coletada em Itápolis apresentou resultados superiores em termos de eficiência. Verificaram-se alterações dos valores de pH e da condutividade elétrica após a adição de alguns dos fertilizantes à calda acaricida.

Contaminação por mercúrio no Brasil: fontes industriais vs garimpo de ouro

This paper reviews the history of Hg contamination in Brazil by characterizing and quantifying two major sources of Hg emissions to the environment: industrial sources and gold mining. Industry was responsible for nearly 100% of total Hg emissions from the late 1940's to the early 1970's, when efficient control policies were enforced, leading to a decrease in emissions. Gold mining, on the other hand was nearly insignificant as a Hg source up to the late 1970's, but presently is responsible for over 80% of total emissions. Presently, over 115 tons of Hg are released into the atmosphere in Brazil annually. Nearly 78 tons come from gold mining operations, 12 tons come from chlor-alkali industry and 25 tons come from all other industrial uses. Inputs to soils and waters however, are still unknown, due to lack of detailed data base. However, emissions from diffuse sources rather than well studied classical industrial sources are probably responsible for the major inputs of mercury to these compartments.

Avaliação de filtros domésticos comerciais para purificação de águas e retenção de contaminantes inorgânicos

Twenty domestic commercial filters, in order to determine the percentual retention of color, turbidity, dry residue, bicarbonates, carbonates, total hardness, nitrogens, iron, chlorides, fluorides, and residual chlorine (parameters of food legislation) and sulphides in thirteen water samples proceeding from springs, wells, rivers, lakes, drinking patterns and standards, before and after purification were evaluated. The results showed that purifiers presented adequate retention for nitrates (74.8 ± 16.2 %) and residual chlorine (74.0 ± 11.2) and medium retention for sulphides (61.7 ± 11.3); while porcelain plus activated carbon filters presented adequate retention for color (90.0 ± 19.7), turbidity (76.4 ± 18.4) and iron (83.5 ± 15.1). Therefore the retention of carbonates, bicarbonates, total hardness, chlorides, dry residue, fluorides, ammonium nitrogens and nitrites was less than 10%, and the values of pH didn't show significant variation, for all the filters studied.

Multicomutação e amostragem binária em análise química em fluxo: determinação espectrofotométrica de ortofosfato em águas naturais

A flow system based on multicommutation and binary sampling process was developed to implement the sample zone trapping technique in order to increase the spectrophotometric analytical range and to improve sensitivity. The flow network was designed with active devices in order to provide facilities to determine sequentialy analyte with a wide concentration range, employing a single pumping channel to propel sample and reagents solutions. The procedure was employed to determine ortophosphate ions in water samples of river and waste. Profitable features such as an analytical throughput of 60 samples determination per hour, relative standard deviation (r.s.d.) of 2% (n = 6) for a typical sample with concentration of 2.78 mg/L were achieved. By applying the paired t-test no significant difference at 95% confidence level was observed between the results obtained with the proposed system and those of the usual flow injection system.

O problema da contaminação na determinação de traços de alumínio

The most common difficulties which occur in trace analysis are those which involve contamination, mainly when the measurement is at very low concentration of ubiquitous elements as aluminium. The worst situation is when a separation step is necessary, because it requires extra-manipulations of the sample. This article describes the degree of contamination and its control for the aluminium trace analysis in dialysis solutions, when aluminium content of about 15 µg/l must be determinated.

A presença de mercúrio em casa constitui um risco de contaminação humana e / ou ambiental? Relato de um caso

Mercury kept in a garage of a residencial building in Rio de Janeiro was accidentally released and caused local (environmental and human) contamination. The concentration of mercury in indoor air of the most critical site reached 15.5 mg/m³. Outdoor air samples showed concentrations ranging from 0.37 to 6.6 mg/m³ . Seventy five per cent of the urine samples collected from 22 residents in the contaminated building showed levels of mercury higher than those observed in non exposed individuals (>6.9 mg/L); in 30% of these samples, the concentration was higher than 20 mg/L. These values show a high level of human contamination and the final consequences were not so serious owing to the quick action taken by one of the residents.

Defeitos superficiais em 2H-WS2 observados por microscopia de tunelamento

Scanning tunnelling microscopy (STM) was used to characterise the basal surface of fresh cleaved crystals of 2H-WS2. Although no impurity or stacking faults could be detected by X-ray diffraction, STM images obtained with negative bias voltage showed two kinds of defects. These defects were attributed to an iodine derivative used as transport agent. In a flat surface free of defects, an image with atomic resolution was achieved with sulphur distances and angles as expected for hexagonal symmetry of 2H-WS2.

A contaminação dos oceanos por radionuclídeos antropogênicos

Several hundreds of artificial radionuclides are produced as the result of human activities, such as the applications of nuclear reactors and particle accelerators, testing of nuclear weapons and nuclear accidents. Many of these radionuclides are short-lived and decay quickly after their production, but some of them are longer-lived and are released into the environment. From the radiological point of view the most important radionuclides are cesium-137, strontium-90 and plutonium-239, due to their chemical and nuclear characteristics. The two first radioisotopes present long half life (30 and 28 years), high fission yields and chemical behaviour similar to potassium and calcium, respectively. No stable element exists for plutonium-239, that presents high radiotoxicity, long half-life (24000 years) and some marine organisms accumulate plutonium at high levels. The radionuclides introduced into marine environment undergo various physical, chemical and biological processes taking place in the sea. These processes may be due to physical dispersion or complicated chemical and biological interactions of the radionuclides with inorganic and organic suspend matter, variety of living organisms, bottom sediments, etc. The behaviour of radionuclides in the sea depends primarily on their chemical properties, but it may also be influenced by properties of interacting matrices and other environmental factors. The major route of radiation exposure of man to artificial radionuclides occuring in the marine environment is through ingestion of radiologically contamined marine organisms. This paper summarizes the main sources of contamination in the marine environment and presents an overview covering the oceanic distribution of anthropogenic radionuclides in the FAO regions. A great number of measurements of artificial radionuclides have been carried out on various marine environmental samples in different oceans over the world, being cesium-137 the most widely measured radionuclide. Radionuclide concentrations vary from region to region, according to the specific sources of contamination. In some regions, such as the Irish Sea, the Baltic Sea and the Black Sea, the concentrations depend on the inputs due to discharges from reprocessing facilities and from Chernobyl accident. In Brazil, the artificial radioactivity is low and corresponds to typical deposition values due to fallout for the Southern Hemisphere.

Determinações multi-elementares de metais, Sulfato e Cloreto em amostras de águas por espectrometria de massas com fonte de plasma (ICP-MS)

The multi-element determination of Al, Cr, Mn, Ni, Cu, Zn, Cd, Ba, Pb, SO4= and Cl- in riverine water samples was accomplished by inductively coupled plasma mass spectrometry (ICP-MS). The sample passed through a column containing the anionic resin AG1-X8 and the metals were determined directly. The retained anionic species were eluted and SO4= and Cl- were determined at m/z 48 and 35 correspondent to the ions SO+ and Cl+ formed at the plasma. Accuracy for metals was assessed by analysing the certified reference TM-26 (National Water Research Institute of Canada). Results for SO4= and Cl- were in agreement with those obtained by turbidimetry and spectrophotometry. LOD's of 0.1 µg l-1 for Cd, Ba and Pb; 0.2 µg l-1 for Al, Mn and Cu; 0.5 µg l-1 for Cr; 0.9 for Zn; 2.0 µg l-1for Ni , 60 µg l-1 for S and 200 µg l-1 Cl were attained.

Determinação de fósforo orgânico em águas de produção petrolífera por ICP- AES e ICP- MS após pré-concentração em coluna de sílica-C18

Results on the optimization of analytical methods for the determination of phosphorus in phosphino-polycarboxylate (PPCA), used frequently as scale inhibitor during oil production, by ICP-AES and ICP-MS are presented. Due to the complex matrix of production waters (brines) and their high concentration in inorganic phosphorus, the separation of organic phosphorus prior to its determination is necessary. In this work, minicolumns of silica immobilized C18 were used. Optimization of the separation step resulted in the following working conditions: (1) prewashing of the column with methanol (80% v/v); (2) use of a flow rate of 5 mL/min and 10 mL/min, respectively, for the preconditioning step and for percolation of the water sample; (3) final elution of organic phosphorus with 7 mL of buffer of H3BO3/NaOH (0.05 M, pH 9) with a flow rate of 1 mL/min. Sample detection limits (3s) for different combinations of nebulizers and spectrometric methods, based on 10 mL water aliquots, are: ICP-AES -Cross flow (47 mg/L) and Ultrasonic (18 mug/L); ICP-MS -Cross flow (1.2 mug/L), Cyclonic (0.7 mug/L) and Ultrasonic (0.5 mug/L). Typical recoveries of organic phosphorus are between 90 and 95% and the repeatability of the whole procedure is better than 10%. The developed methodology was applied successfully to samples from the oil-well NA 46, platform PNA 2, Campos basin, Brazil. Assessment of the PPCA inhibitor was possible at lower concentrations than achieved by current analytical methods, resulting in benefits such as reduced cost of chemicals, postponed oil production and lower environmental impacts.

Aplicação de SPME (Solid Phase Micro-Extraction) na análise de águas potáveis de três localidades do estado de São Paulo

The technique of solid phase microextraction (SPME) was used for the extraction of halogenated contaminants of water samples from three cities of the State of São Paulo and the extracts were submitted to gas chromatographic analysis with electron capture detection (GC-ECD). In the samples of water collected at the city of São Paulo the detected level of trihalomethanes (THM) expressed as the sum of chloroform, dibromochloromethane and dichlorobromomethane, were higher than the permissible limit established by the Brazilian regulation. In the samples collected at the two other cities the level of any of the three THM remained below the sensitivity of the ECD.