Iodine Brachytherapy for Large Uveal Melanomas

Uveal melanoma is the most common primary intraocular malignancy in adults. Vision in the affected eye is threatened by both the tumor and side-effects from the treatments currently available. Poor prognosis for saving vision increases with tumor size and, consequently, enucleation has been the treatment of choice for large uveal melanomas in most centers. However, increasing evidence suggests that no survival benefit is gained (nor lost) by enucleation as compared to eye-conserving methods. The Helsinki University Eye Hospital has since 1990 offered episcleral iodine-125 plaque brachytherapy (IBT) for all patients unwilling to undergo enucleation for a large uveal melanoma. The primary aim of this study was to assess survival, local tumor recurrence and preservation of the eye and vision after IBT in a population-based series of 97 patients with uveal melanomas classified as large by the Collaborative Ocular Melanoma Study (COMS) criteria. Further aims included reporting the incidence of side-effects and assessing the role of intraocular dose distribution and clinical risk factors in their development. Finally, means to improve the current treatment were investigated by using computer models to compare existing plaques with collimating ones and by comparing the outcome of a subgroup of 54 IBT patients with very thick tumors with 33 patients with similarly-sized tumors managed with transscleral local resection (TSR) in Liverpool, United Kingdom. Kaplan-Meier estimates of all-cause and melanoma-specific survival at 5 years after IBT were 62% and 65%, respectively, and visually comparable with the survival experience of patients reported after enucleation by the COMS. Local recurrence developed in 6% of eyes and 84% of eyes were conserved at 5 years. Visual prognosis was guarded with 11% avoiding loss of 20/70 vision and 26% avoiding loss of 20/400 vision in the tumor eye at 2 years. Large tumor height and short distance from the posterior pole were independently associated with loss of vision. Using cumulative incidence analysis to account for competing risks, such as enucleation and metastatic death, the 5-year incidence of cataract after IBT was 79%, glaucoma 60%, optic neuropathy 46%, maculopathy 52%, persistent or recurring retinal detachment (RD) 25%, and vitreous hemorrhage 36%. In multivariate competing risks regression models, increasing tumor height was associated with cataract, iris neovascularization and RD. Maculopathy and optic neuropathy were associated with distance from the tumor to the respective structure. Median doses to the tumor apex, macula and optic disc were 81 Gy (range, 40-158), 79 Gy (range, 12-632), and 83 Gy (range, 10-377), respectively. Dose to the optic disc was independently associated with optic neuropathy, and both dose to the optic disc and dose to the macula predicted vision loss after IBT. Simulated treatment using collimating plaques resulted in clinically meaningful reduction in both optic disc (median reduction, 30 Gy) and macular (median reduction, 36 Gy) doses as compared to the actual treatment with standard plaques. In the subgroup of patients with uveal melanomas classified as large because of tumor height, cumulative incidence analysis revealed that while long-term preservation of 20/70 vision was rare after both IBT and TSR, preservation of 20/400 vision was better after TSR (32% vs. 5% at 5 years). In multivariate logistic regression models, TSR was independently associated with better preservation of 20/400 vision (OR 0.03 at 2 years, P=0.005) No cases of secondary glaucoma were observed after TSR and optic neuropathy was rare. However, local tumor recurrence was more common after TSR than it was after IBT (Cumulative incidence 41% vs. 7% at 5 years, respectively). In terms of survival, IBT seems to be a safe alternative to enucleation in managing large uveal melanomas. Local tumor control is no worse than with medium-sized tumors and the chances of avoiding secondary enucleation are good. Unfortunately, side-effects from radiotherapy are frequent, especially in thick tumors, and long-term prognosis of saving vision is consequently guarded. Some complications can be limited by using collimating plaques and by managing uveal melanomas that are large because of tumor height with TSR instead of IBT. However, the patient must be willing to accept a substantial risk of local tumor recurrence after TSR and it is best suited for cases in which the preservation of vision in the tumor eye is critical.

Numerical Simulation of Groundwater Flow with Gradually Increasing Heterogeneity due to Clogging

Well injection replenishes depleting water levels in a well field. Observation well water levels some distance away from the injection well are the indicators of the success of a well injection program. Simulation of the observation well response, located a few tens of meters from the injection well, is likely to be affected by the effects of nonhomogeneous medium, inclined initial water table, and aquifer clogging. Existing algorithms, such as the U.S. Geological Survey groundwater flow software MODFLOW, are capable of handling the first two conditions, whereas time-dependent clogging effects are yet to be introduced in the groundwater flow models. Elsewhere, aquifer clogging is extensively researched in theory of filtration; scope for its application in a well field is a potential research problem. In the present paper, coupling of one such filtration theory to MODFLOW is introduced. Simulation of clogging effects during “Hansol” well recharge in the parts of western India is found to be encouraging.

Quality assessment of CdZnTe (Zn similar to 4 %) crystals

We have studied the as grown and annealed CdZnTe (Zn similar to 4 %) crystals for the assessment of their crystalline quality. As grown crystals suffer from tellurium precipitates and cadmium vacancies, which are inherent, due to retrograde solid solubility curve in the phase diagram. This is reflected in the Fourier transform infrared (FTIR) spectra over the 400 - 4500 cm(-1) range by a strong absorption around 2661 cm(-1) which corresponds to the band gap of tellurium confirming their presence, where-as a monotonic decrease in the transmission with the decrease in wave number indicates the presence of cadmium vacancies. Obviously the presence of Cd vacancies lead to the formation of tellurium precipitates confirming their presence. Annealed samples under cadmium + zinc ambient at 650 degrees C for 6 hours show an improvement in the transmission over the same range. This can be attributed to thermo-migration of tellurium precipitates and hence bonding with Cd or Zn to form CdZnTe. This is further supported by the reduced full width at half maximum in the X-ray diffraction rocking curve of these CdZnTe crystals. Cadmium annealing although can passivate Cd vacancy related defects and reduce the Te precipitates, as is observed in our low temperature Photoluminescence (PL) spectra, alone may not be sufficient possibly due to the loss of Zn. Vacuum annealing at 650 degrees C for 6 hours further deteriorated the material quality as is reflected in the low temperature PL spectra by the introduction of a new defect band around 0.85 eV and reduced IR transmission.

Fabrication of Fe-doped WO3 films for NO2 sensing at lower operating temperature

Fe-doped tungsten oxide thin films with different concentrations (0 to 2.6 at%) were synthesized on glass and alumina substrates at room temperature using DC reactive sputtering and subsequently annealed at 300oC for 1 hour in air. The alumina substrate has pre-printed interdigitated Pt-electrodes for gas sensing measurements. The effects of Fe-doping on the film structure and morphology, electronic and optical properties for gas sensing were investigated. The grain size of the different films on the alumina and Pt regions of the substrate vary only slightly between 43-57 nm with median size of about 50 nm. Raman spectra showed that the integrated intensity of W=O to O–W–O bands increases with increasing Fe concentrations and this indicated an increase in the number of defects. From XPS the different concentrations of the Fe-doped films were 0.03 at%, 1.33 at% and 2.6 at%. All the films deposited on glass substrate have shown similar visible transmittance (about 70%) but the optical band gap of the pure film decreased form 3.30 eV to 3.15 eV after doping with 2.6 at% Fe. The Fe-doped WO3 film with the highest Fe concentration (2.6 at% Fe) has shown an enhanced gas sensing properties to NO2 at relatively lower operating temperature (150oC) and this can be attributed to the decrease in the optical band gap and an increase in the number of defects compared to the pure WO3 film.

Synthesis and characterization of Zn1-xMnxS nanocrystalline films prepared on glass substrates

Nanocrystalline Zn1-xMnxS films (x=0.04, 0.08 and 0.12) were deposited on glass substrates at 400 K using a simple resistive thermal evaporation technique. All the deposited films were characterized by chemical, structural, morphological, optical and magnetic properties. Scanning electron microscopy and atomic force microscopy studies showed that all the films investigated were in nanocrystalline form with the grain size lying in the range 10–20 nm. All the films exhibited cubic structure and the lattice parameters increase linearly with composition. The absorption edge shifted from the higher-wavelength region to lower wavelengths with increase in Mn concentration. The magnetization increased sharply with increase of the Mn content up to x=0.08 and then decreased with further increase of the Mn content. Particularly, Zn0.92Mn0.08S concentration samples show a weak ferromagnetic nature, which might be the optimum concentration for optoelectronic and spintronic device applications.

The effect of ageing on microstructure and nanoindentation behaviour of dc magnetron sputter deposited nickel rich NiTi films

Nickel rich NiTi films were sputter deposited on p-doped Si left angle bracket1 0 0right-pointing angle bracket substrates maintained at 300 °C. The films were subsequently solution treated at 700 °C for 30 min followed by ageing at 400 and 500 °C for 5 h. The microstructure of the films was examined by TEM and these studies revealed that the NiTi films were mostly amorphous in the as-deposited condition. The subsequent solution treatment and ageing resulted in crystallization of the films with the film aged at 400 °C exhibiting nanocrystalline grains and three phases viz. B2 (austenite), R and Ni3Ti2 whereas the film aged at 500 °C shows micron sized grains and two phases viz. R and Ni3Ti2. Nanoindentation studies revealed that the nature of the load versus indentation depth response for the films aged at 400 and 500 °C was different. For the same load, the indenter penetrated to a much greater depth for the film aged at 400 °C as compared to the film aged at 500 °C. Also the ratio of the residual indentation depth (hf) to maximum indentation depth (hmax) is lower for the film aged at 400 °C as compared to the film aged at 500 °C. This was attributed to the occurrence of stress induced martensitic transformation of the B2 phase present in the film aged at 400 °C during indentation loading which results in a transformation strain in addition to the normal elastic and plastic strains and its subsequent recovery on unloading. The hardness and elastic modulus measured using the Oliver and Pharr analysis was also found to be lower for the film aged at 400 °C as compared to the film aged at 500 °C which was also primarily attributed to the same effect.

Single and multi-step phase transformation in CuZr nanowire under compressive/tensile loading

A novel stress induced martenistic phase transformation is reported in an initial B2-CuZr nanowire of cross-sectional dimensions in the range of 19.44 x 19.44-38.88 x 38.88 angstrom(2) and temperature in the range of 10-400 K under both tensile and compressive loading. Extensive Molecular Dynamic simulations are performed using an inter-atomic potential of type Finnis and Sinclair. The nanowire shows a phase transformation from an initial B2 phase to BCT (body-centered-tetragonal) phase with failure strain of similar to 40% in tension, whereas in compression, comparatively a small B2 -> BCT phase transformation is observed with failure strain of similar to 25%. Size and temperature dependent deformation mechanisms which control ultimately the B2 -> BCT phase transformation are found to be completely different for tensile and compressive loadings. Under tensile loading, small cross-sectional nanowire shows a single step phase transformation, i.e. B2 -> BCT via twinning along {100} plane, whereas nanowires with larger cross-sectional area show a two step phase transformation, i.e. B2 -> R phase -> BCT along with intermediate hardening. In the first step, nanowire shows phase transformation from B2 -> R phase via twinning along {100} plane, afterwards the nanowire deforms via twinning along {110} plane which cause further transformation from R phase -> BCT phase. Under compressive loading, the nanowire shows crushing along {100} plane after a single step phase transformation from B2 -> BCT. Proper tailoring of such size and temperature dependent phase transformation can be useful in designing nanowire for high strength applications with corrosion and fatigue resistance. (C) 2009 Elsevier Ltd. All rights reserved.

Antimicrobial effects of ethanolic extracts from Cuscuta reflexa Roxb. (Convolvulaceae).

Ethanolic whole plant extracts obtained from Cuscuta reflexa Roxb were screened against Gram positive (Bacillus subtilis and Staphylococcus aureus) and Gram negative (Escherichia coli and Salmonella typhi) bacteria to evaluate their antimicrobial activity. Of the four concentrations of plant extract tested (200 µg/mL, 300 µg/mL, 400 µg/mL or 500 µg/mL), 500 µg/mL elicited the greatest zones of bacterial inhibition across three of the bacteria. In contrast, the growth of Salmonella typhi was not halted regardless of extract concentration. At 200 µg/mL, only the growth of E. coli was inhibited. Overall, although the greatest antimicrobial activity was demonstrated to be against E. coli at a concentration of 500 µg/mL (24.6±0.24), upon comparison to the other bacteria, both B. cereus and S. aureus educed similar zones of inhibition upon comparison to their positive antibiotic control.

Hard Custom, Hard Dance : Social Organisation, (Un)Differentiation and Notions of Power in a Tabiteuean Community, Southern Kiribati

Hard Custom, Hard Dance: Social Organisation, (Un)Differentiation and Notions of Power in a Tabiteuean Community, Southern Kiribati is an ethnographic study of a village community. This work analyses social organisation on the island of Tabiteuea in the Micronesian state of Kiribati, examining the intertwining of hierarchical and egalitarian traits, meanwhile bringing a new perspective to scholarly discussions of social differentiation by introducing the concept of undifferentiation to describe non-hierarchical social forms and practices. Particular attention is paid to local ideas concerning symbolic power, abstractly understood as the potency for social reproduction, but also examined in one of its forms; authority understood as the right to speak. The workings of social differentiation and undifferentiation in the village are specifically studied in two contexts connected by local notions of power: the meetinghouse institution (te maneaba) and traditional dancing (te mwaie). This dissertation is based on 11 months of anthropological fieldwork in 1999‒2000 in Kiribati and Fiji, with an emphasis on participant observation and the collection of oral tradition (narratives and songs). The questions are approached through three distinct but interrelated topics: (i) A key narrative of the community ‒ the story of an ancestor without descendants ‒ is presented and discussed, along with other narratives. (ii) The Kiribati meetinghouse institution, te maneaba, is considered in terms of oral tradition as well as present-day practices and customs. (iii) Kiribati dancing (te mwaie) is examined through a discussion of competing dance groups, followed by an extended case study of four dance events. In the course of this work the community of close to four hundred inhabitants is depicted as constructed primarily of clans and households, but also of churches, work co-operatives and dance groups, but also as a significant and valued social unit in itself, and a part of the wider island district. In these partly cross-cutting and overlapping social matrices, people are alternatingly organised by the distinct values and logic of differentiation and undifferentiation. At different levels of social integration and in different modes of social and discursive practice, there are heightened moments of differentiation, followed by active undifferentiation. The central notions concerning power and authority to emerge are, firstly, that in order to be valued and utilised, power needs to be controlled. Secondly, power is not allowed to centralize in the hands of one person or group for any long period of time. Thirdly, out of the permanent reach of people, power/authority is always, on the one hand, left outside the factual community and, on the other, vested in community, the social whole. Several forms of differentiation and undifferentiation emerge, but these appear to be systematically related. Social differentiation building on typically Austronesian complementary differences (such as male:female, elder:younger, autochtonous:allotochtonous) is valued, even if eventually restricted, whereas differentiation based on non-complementary differences (such as monetary wealth or level of education) is generally resisted, and/or is subsumed by the complementary distinctions. The concomitant forms of undifferentiation are likewise hierarchically organised. On the level of the society as a whole, undifferentiation means circumscribing and ultimately withholding social hierarchy. Potential hierarchy is both based on a combination of valued complementary differences between social groups and individuals, but also limited by virtue of the undoing of these differences; for example, in the dissolution of seniority (elder-younger) and gender (male-female) into sameness. Like the suspension of hierarchy, undifferentiation as transformation requires the recognition of pre-existing difference and does not mean devaluing the difference. This form of undifferentiation is ultimately encompassed by the first one, as the processes of the differentiation, whether transformed or not, are always halted. Finally, undifferentiation can mean the prevention of non-complementary differences between social groups or individuals. This form of undifferentiation, like the differentiation it works on, takes place on a lower level of societal ideology, as both the differences and their prevention are always encompassed by the complementary differences and their undoing. It is concluded that Southern Kiribati society be seen as a combination of a severely limited and decentralised hierarchy (differentiation) and of a tightly conditional and contextual (intra-category) equality (undifferentiation), and that it is distinctly characterised by an enduring tension between these contradicting social forms and cultural notions. With reference to the local notion of hardness used to characterise custom on this particular island as well as dance in general, it is argued in this work that in this Tabiteuean community some forms of differentiation are valued though strictly delimited or even undone, whereas other forms of differentiation are a perceived as a threat to community, necessitating pre-emptive imposition of undifferentiation. Power, though sought after and displayed - particularly in dancing - must always remain controlled.

Uusien opiskelijoiden integroituminen yliopistoon : Sosiaalipsykologinen näkökulma

The first year at the university is critical in shaping the student s future academic development. Student integration has been shown to affect learning, motivation, persistence, and ultimately, graduation. Most importantly, however, integration affects how students academic expertise develops. In this study a social-psychological assumption was made: one cannot grow into academic expertise in isolation, without interaction with teachers and peers. Integration happens via engagement. In this research, social and academic integration among Finnish freshmen was studied. How much did freshmen interact with their teachers and peers; how interested did they think their teachers were in students; how committed did they feel; and how did they assess their own academic development? In addition to integration, students were asked about their identification with the university and the frequency of actual contacts with teachers and peers. Lastly, students personal epistemologies were studied to see if they were related to integration or frequency of contacts. The data was collected at the University of Helsinki in the autumn of 2001 and spring of 2002 at three faculties: the faculty of Social Sciences, Humanities and Science. In the autumn, 270 freshmen, and in the spring, 400 freshmen, completed the questionnaire. In addition to the cross-sectional data a longitudinal data was formed from 77 of the respondents. The results showed differences in how students were integrated. Freshmen at the faculty of Science were the least integrated whereas freshmen at the faculty of Humanities were the most integrated. Identification to the university was positively related to integration. The frequency of contacts with faculty and peers was positively related to integration and identification. A more developed personal epistemology was also positively related to integration and frequency of contacts. Differences were also found between the sexes in frequency of peer interaction and level of epistemology. This study has both theoretical and practical implications. Positive correlations between integration, identification, frequency of contacts and personal epistemology were found. The guiding assumption of the significance of social interaction was thus supported. The practical relevance of the study is for how teaching is carried out. In this data, over 50% of new university students at the end of their first year said they had never received feedback from an exam, never had a discussion with their teacher about a scientific topic, and had never discussed with a teacher how their studies were going.

Support vector machine approach for the switching transient peak overvoltages during line energization

At the time of restoration transmission line switching is one of the major causes, which creates transient overvoltages. Though detailed Electro Magnetic Transient studies are carried out extensively for the planning and design of transmission systems, such studies are not common in a day-today operation of power systems. However it is important for the operator to ensure during restoration of supply that peak overvoltages resulting from the switching operations are well within safe limits. This paper presents a support vector machine approach to classify the various cases of line energization in the category of safe or unsafe based upon the peak value of overvoltage at the receiving end of line. Operator can define the threshold value of voltage to assign the data pattern in either of the class. For illustration of proposed approach the power system used for switching transient peak overvoltages tests is a 400 kV equivalent system of an Indian southern gri

Structural and photoelectrical characterization of hot wall deposited CuInSe2 thin films and the fabrication of CuInSe2 based solar cells

Films of CuInSe2 were deposited onto glass substrates by a hot wall deposition method using bulk CuInSe2 as a source material. All the deposited CuInSe2 films were found to be polycrystalline in nature exhibiting the chalcopyrite structure with the crystallite orientation along (101),(112),(103),(211),(220),(312) and (400) directions. The photocurrent was found to increase with increase in film thickness and also with increase of light intensity. Photocurrent spectra show a peak related to the band-to-band transition. The spectral response of CuInSe2 thin films was studied by allowing the radiation to pass through a series of interference filters in the wavelength range 700-1200 rim. Films of higher thickness exhibited higher photosensitivity while low thickness films exhibited moderate photosensitivity. CuInSe2-based Solar cells with different types of buffer layers such as US, Cdse, CuInSe2 and CdSe0.7Te0.3 were fabricated. The current and voltage were measured using an optical power meter and an electrometer respectively. The fabricated solar cells were illuminated using 100 mW/cm(2) white light under AM1 conditions. (C) 2006 Elsevier Inc. All rights reserved.

Maan magneettikentän dipolimallin toimivuus inklinaatiojakauman perusteella

The magnetic field of the Earth is 99 % of the internal origin and generated in the outer liquid core by the dynamo principle. In the 19th century, Carl Friedrich Gauss proved that the field can be described by a sum of spherical harmonic terms. Presently, this theory is the basis of e.g. IGRF models (International Geomagnetic Reference Field), which are the most accurate description available for the geomagnetic field. In average, dipole forms 3/4 and non-dipolar terms 1/4 of the instantaneous field, but the temporal mean of the field is assumed to be a pure geocentric axial dipolar field. The validity of this GAD (Geocentric Axial Dipole) hypothesis has been estimated by using several methods. In this work, the testing rests on the frequency dependence of inclination with respect to latitude. Each combination of dipole (GAD), quadrupole (G2) and octupole (G3) produces a distinct inclination distribution. These theoretical distributions have been compared with those calculated from empirical observations from different continents, and last, from the entire globe. Only data from Precambrian rocks (over 542 million years old) has been used in this work. The basic assumption is that during the long-term course of drifting continents, the globe is sampled adequately. There were 2823 observations altogether in the paleomagnetic database of the University of Helsinki. The effect of the quality of observations, as well as the age and rocktype, has been tested. For comparison between theoretical and empirical distributions, chi-square testing has been applied. In addition, spatiotemporal binning has effectively been used to remove the errors caused by multiple observations. The modelling from igneous rock data tells that the average magnetic field of the Earth is best described by a combination of a geocentric dipole and a very weak octupole (less than 10 % of GAD). Filtering and binning gave distributions a more GAD-like appearance, but deviation from GAD increased as a function of the age of rocks. The distribution calculated from so called keypoles, the most reliable determinations, behaves almost like GAD, having a zero quadrupole and an octupole 1 % of GAD. In no earlier study, past-400-Ma rocks have given a result so close to GAD, but low inclinations have been prominent especially in the sedimentary data. Despite these results, a greater deal of high-quality data and a proof of the long-term randomness of the Earth's continental motions are needed to make sure the dipole model holds true.

Explorations in the distributional and semantic similarity of words

A straightforward computation of the list of the words (the `tail words' of the list) that are distributionally most similar to a given word (the `head word' of the list) leads to the question: How semantically similar to the head word are the tail words; that is: how similar are their meanings to its meaning? And can we do better? The experiment was done on nearly 18,000 most frequent nouns in a Finnish newsgroup corpus. These nouns are considered to be distributionally similar to the extent that they occur in the same direct dependency relations with the same nouns, adjectives and verbs. The extent of the similarity of their computational representations is quantified with the information radius. The semantic classification of head-tail pairs is intuitive; some tail words seem to be semantically similar to the head word, some do not. Each such pair is also associated with a number of further distributional variables. Individually, their overlap for the semantic classes is large, but the trained classification-tree models have some success in using combinations to predict the semantic class. The training data consists of a random sample of 400 head-tail pairs with the tail word ranked among the 20 distributionally most similar to the head word, excluding names. The models are then tested on a random sample of another 100 such pairs. The best success rates range from 70% to 92% of the test pairs, where a success means that the model predicted my intuitive semantic class of the pair. This seems somewhat promising when distributional similarity is used to capture semantically similar words. This analysis also includes a general discussion of several different similarity formulas, arranged in three groups: those that apply to sets with graded membership, those that apply to the members of a vector space, and those that apply to probability mass functions.

Nanostructured Copper(II) oxide thin film for alcohol sensing

Nanostructured copper(II) oxide film was deposited using reactive DC magnetron sputtering. It has been characterized using XRD, EDAX, XPS, and FESEM. The grain size of copper oxide film was found to be 40-65 nm with size distribution. The entire study was divided into two parts. In the first part, the film has been studied for its response to alcohol at different temperatures to find the optimum sensing temperature, whereas in the second part, the film sensitivity to different alcohol concentrations were studied at fixed optimum operating temperature. The optimum temperature for the response of ethanol was observed to be 400 C,and the response for different concentrations was found to be almost linear.