Determination of psilocin and psilocybin using flow injection analysis with acidic potassium permanganate and tris(2,2’-bipyridyl) ruthenium(II) chemiluminescence detection respectively

A simple, rapid and sensitive method for the determination of psilocin and psilocybin is described. This is the first report on the determination of psilocin and psilocybin using flow injection analysis with acidic potassium permanganate and tris(2,2′-bipyridyl)ruthenium(II) chemiluminescence. The limits of detection (signal-to-noise ratio = 3) are 9 × 10⁻¹⁰ M and 3 × 10⁻¹⁰ M for psilocin and psilocybin, respectively.A concise synthetic route for psilocin in three steps from readily available starting materials is also described. The structures were elucidated on the basis of spectroscopic data.

A rapid test for heroin (3,6-Diacetylmorphine) based on two chemiluminescence reactions

A rapid method for screening drug seizure samples for 3,6-diacetylmorphine (heroin), which consists of a simple hydrolysis procedure and flow-injection analysis with two chemiluminescence reagents, is described. Before hydrolysis, 3,6-diacetylmorphine evokes an intense response with a tris(2,2'-bipyridyl)ruthenium(III) reagent (prepared by dissolving the perchlorate salt in acetonitrile), and a relatively weak chemiluminescence response with a second reagent: potassium permanganate in an aqueous acidic polyphosphate solution. However, the permanganate reagent is extremely sensitive toward the hydrolysis products of 3,6-diacetylmorphine (i.e., 6-monoacetylmorphine and morphine). Some compounds commonly found in drug laboratories may cause false positives with tris(2,2'-bipyridyl)ruthenium(III), but do not produce the markedly increased response with the permanganate reagent after the hydrolysis procedure. The combination of these two tests therefore provides an effective presumptive test for the presence of 3,6-diacetylmorphine, which we have verified with 14 samples obtained from a forensic science laboratory.

The determination of morphine in the larvae of calliphora stygia using flow injection analysis and HPLC with chemiluminescence detection

Selective determination of morphine in the larvae of Calliphora stygia (Fabricius) (Diptera: Calliphoridae) using acidic potassium permanganate chemiluminescence detection coupled with flow injection analysis and high-performance liquid chromatography (HPLC) is described. Larvae of C. stygia were reared on minced meat substrates that had been spiked with varying concentrations of morphine. Morphine concentrations were chosen to reflect typical levels in human tissues from opiate overdose victims. After maturing on substrates, larvae were analyzed for the presence of morphine using chemiluminescence detection coupled to flow injection analysis and a rapid HPLC method. Analysis of the larval matrix by flow injection analysis with chemiluminescence detection indicated the presence of interferants capable of generating chemiluminescence. A rapid chromatographic separation with a monolithic column allowed selective determination of morphine in larvae using postcolumn chemiluminescence detection. Larvae of C. stygia reared on substrates containing morphine at concentrations of 500 and 1000 ng/g did not sequester morphine at detectable concentrations. Larvae reared on substrates containing morphine concentrations of 2500, 5000, and 10,000 ng/g tested positive for the drug at concentrations of 765, 2720, and 3010 ng/g, respectively.

Online banking vs. bricks & mortar - or a hybrid model? A preliminary investigation of Australian and Indian banks

Deregulation, innovations in mobile and wireless technologies and media convergence, together with the rapid diffusion of the Internet, have opened up strategic business opportunities in the financial sector. With deregulation removing entry barriers, an increasing number of online banks are threatening the market share of ‘bricks and mortar’ banks. To survive this competition, and to leverage the new opportunities of online and mobile banking facilitated by the Internet, many banks have adapted a hybrid, ‘clicks and mortar’ model, to increase their profitability while reducing transaction costs. In this paper, we report the results of a preliminary analysis based on a few major banks in Australia and India, two diverse economies, to reveal some interesting insights.

Robust control applied to metal spraying for rapid tooling

The spray forming process is a novel method of rapidly manufacturing tools and dies for stamping and injection operations. The process sprays molten tool steel from a set of arc spray guns onto a ceramic former to build up a thick steel shell. The volumetric contraction that occurs as the steel cools is offset by a volumetric expansion taking place within the sprayed steel, which allows the dimensional accurate tools to be produced. To ensure that the required phase transformation takes place, the temperature of the steel is regulated during spraying. The sprayed metal acts both as a source of mass and a source of heat and by adjusting the rate at which metal is sprayed; the surface temperature profile over the surface of the steel can be controlled. The temperature profile is measured using a thermal imaging camera and regulated by adjusting the rate at which the guns spray the steel. Because the temperature is regulated by adjusting the feed rate to an actuator that is moving over the surface, this is an example of mobile control, which is a class of distributed parameter control. The dynamic system has been controlled using a PI controller before. The paper describes the application of H∞ tracking type controller as the desire was for the average temperature to follow a desired profile. A study on the controllability of the underlying system was aimed at.

Single vs. two steroid injections for carpal tunnel syndrome: a randomised clinical trial

We investigated the efficacy of a single vs. double steroid injections in the treatment of carpal tunnel syndrome (CTS) in a randomised double-blind controlled trial. Patients with idiopathic CTS were randomised into (i) one group receiving a baseline methylprednisolone acetate injection plus a saline injection 8 weeks later and (ii) a second group receiving methylprednisolone acetate injection at baseline and at 8 weeks. The primary outcome was the Global Symptom Score (GSS). Forty patients were recruited. By 40 weeks, the mean GSS improved from 25.6 to 14.1 in the single-injection group whereas from 26.7 to 12.6 in the reinjection group, but there was no significant difference in GSS between the two groups (p = 0.26). There were also no significant differences in terms of electrophysiological and functional outcomes. The results suggest that an additional steroid injection confers no added benefit to a single injection in terms of symptom relief.

Sequential injection and liquid chromatography for chemiluminescent detection of opiates

This thesis encompasses the development of analytical instrumentation, software and chemical methodologies for the rapid determination of pharmaceuticals in process extracts. Sensitive detection of morphine, codeine, oripavine and thebaine was achieved by measuring the quantity of light emitted as a result of their reactions with potassium permanganate and tris(2,2'-bipyridyl)ruthenium(III).

Epidemiology of early Rapid Response Team activation after emergency department admission

BACKGROUND: Rapid Response Team (RRT) calls can often occur within 24h of hospital admission to a general ward. We seek to determine whether it is possible to identify these patients before there is a significant clinical deterioration. METHODS: Retrospective case-controlled study comparing patient characteristics, vital signs, and hospital outcomes in patients triggering RRT activation within 24h of ED admission (cases) with matched ED admissions not receiving a RRT call (controls). RESULTS: Over 12 months, there were 154 early RRT calls. Compared with controls, cases had a higher heart rate (HR) at triage (92 vs. 84beats/min; p=0.008); after 3h in the ED (91 vs. 80beats/min; p=0.0007); and at ED discharge (91 vs. 81beats/min; p=0.0005). Respiratory rate (RR) was also higher at triage (21.2 vs. 19.2breaths/min; p=0.001). On multiple variable analysis, RR at triage and HR before ward transfer predicted early RRT activation: OR 1.07 [95% CI 1.02-1.12] for each 1breath/min increase in RR; and 1.02 [95% CI 1.002-1.030] for each beat/minute increase in HR, respectively. Study patients required transfer to the intensive care in approximately 20% of cases and also had a greater mortality: (21% vs. 6%; OR 4.65 [95% CI 1.86-11.65]; p=0.0003) compared with controls. CONCLUSIONS: Patients that trigger RRT calls within 24h of admission have a fourfold increase in risk of in-hospital mortality. Such patients may be identified by greater tachycardia and tachypnoea in the ED.

Keyboard control method for virtual reality micro-robotic cell injection training

The rapid development of virtual reality offers significant potential for skills training applications. Our ongoing work proposes virtual reality operator training for the micro-robotic cell injection procedure. The interface between the operator and the system can be achieved in many different ways. The computer keyboard is ubiquitous in its use for everyday computing applications and also commonly utilized in virtual reality systems. Based on the premise that most people have experience in using a computer keyboard, as opposed to more sophisticated input devices, this paper considers the feasibility of using a keyboard to control the micro-robot for cell injection. In this study, thirteen participants underwent the experimental evaluation. The participants were asked to perform three simulated trial sessions in a virtual micro-robotic cell injection environment. Each session consisted of ten cell injection trials and relevant data for each trial were recorded and analyzed. Results showed participants' performance improvement after the three sessions. It was also observed that participants intuitively controlled multiple axes of the micro-robot simultaneously despite the absence of instruction on how to do so. This continued throughout the experiments and suggests skills transfer from other keyboard based interactions. Based on the results provided, it is suggested that keyboard control is a feasible, simple and low-cost control method for the virtual micro-robot.

Effects of the fire regime on mammal occurrence after wildfire: site effects vs landscape context in fire-prone forests

Wildfires have major impacts on ecosystems globally. Fire regimes (including fire frequency, intensity, season and type of fire) influence the status of species by altering habitat suitability at the site scale, and by creating heterogeneity at the landscape scale. The relative effects of site and landscape-scale fire attributes on animal species are rarely examined together. Such knowledge is important, given that fire regimes are sensitive to changing land management practices; and that fires are predicted to become larger and more frequent in some regions as a result of climate change. Here, we tested the relative influence of elements of the fire regime (fire severity, fire history) at the site-scale, and the landscape context (extent of surrounding unburnt forest, fire heterogeneity) on the occurrence of native terrestrial mammals after severe wildfire in south-eastern Australia. We conducted surveys by using automatically triggered, infrared cameras at 80 sites in fire-prone eucalypt forests, 2-3. years post-wildfire. Thirteen native mammal species were recorded, eight of which were detected with sufficient frequency for analysis. Most species were widespread (35-90% of sites) and recorded in all fire severity classes. Fire effects at the site-level were more influential than landscape context effects arising from heterogeneity in the fire regime (e.g. extent of surrounding unburnt forest). Fire severity was the most influential of the fire-regime elements investigated, but it affected different species in different ways. This study highlights three main points relevant to conservation of terrestrial mammals after wildfire. First, spatial variation in fire severity associated with wildfire (ranging from unburned to severely burned stands) is an important contributor to the post-fire status of species. Second, post-fire environmental conditions are significant: here, rapid regeneration of vegetation following drought-breaking rains greatly influenced the suitability of post-fire habitats. Third, it is valuable to consider the effects of the fire regime at multiple scales, including both the site (forest stand) and its landscape context. Insights from short-term surveys, such as this, will be enhanced by complementary longitudinal studies, especially where they encompass environmental variation through the post-fire succession.

Flow-injection spectrophotometric determination of dipyrone in pharmaceutical formulations using ammonium molybdate as chromogenic reagent

A simple and rapid flow-injection spectrophotometric method is reported for the determination of dipyrone in pharmaceutical formulations. The method is based on the reaction of dipyrone with ammonium molybdate in acidic medium to produce blue molybdenum, which was detected spectrophotometrically at 620 nm. The analyte was determined in a single-line flow system. The calibration curve obtained was linear in the range of 5x10(-4) to 8x10(-3) mol L-1 for dipyrone concentration and the precision ( s r =1.7%) was satisfactory. The method proved to be selective and adequately sensitive. Application of the method to the analysis of pharmaceutical samples resulted in excellent accuracy; the percent mean recoveries were in the range 95.3%-101% and relative errors less than 5.0% for five pharmaceutical formulations were found.

Electrical properties of polymer/metal interface in polymer light-emitting devices: electron injection barrier suppression

The electrical characterization of a high efficient multilayer polymer light emitting diode using poly[(2-methoxy-5-hexyloxy)-p-phenylenevinylene] as the emissive layer and an anionic fluorinated surfactant as the electron transport layer was performed. For the sake of comparison, a conventional single layer device was fabricated. The density current vs. voltage measurements revealed that the conventional device has a higher threshold voltage and lower current compared to the surfactant modified device. The effective barrier height for electron injection was suppressed. The influence of the interfaces and bulk contributions to the dc and high frequencies conductivities of the devices was also discussed. (c) 2006 Springer Science + Business Media, Inc.

Pregnancy outcomes in women with repeated implantation failures after intracytoplasmic morphologically selected sperm injection (IMSI)

Background: The purpose of this study was to compare laboratory and clinical outcomes of intracytoplasmic morphologically selected sperm injection (IMSI) and conventional intracytoplasmic sperm injection (ICSI) in couples with repeated implantation failures.Methods: A total of 200 couples with at least two prior unsuccessful ICSI cycles were enrolled: 100 couples were submitted to IMSI and 100 were submitted to routine ICSI. For IMSI, spermatozoa were selected at 8400x magnification using an inverted microscope equipped with Nomarski (differential interference contrast) optics. For conventional ICSI, spermatozoa were selected at 400x magnification. Clinical outcomes were evaluated between the two groups.Results: Study patients were comparable in age, number of treatment failures, aetiology of infertility, percentage of normal form assessed by MSOME (motile sperm organelle morphology examination), semen parameters, total number of oocytes collected, number of mature oocytes collected, total number of embryos transferred and number of high-quality embryos transferred. No statistically significant differences between the two groups were observed with regard to rates of fertilisation, implantation and pregnancy/cycle. Although not statistically significant, rates of miscarriage (IMSI:15.3% vs ICSI:31.7%), ongoing pregnancy (IMSI:22% vs ICSI:13%) and live births (IMSI:21% vs ICSI:12%) showed a trend towards better outcomes in the IMSI group. In addition, analysis of subpopulations with or without male factor showed similar results.Conclusions: Our results suggest that IMSI does not provide a significant improvement in clinical outcome compared to ICSI, at least in couples with repeated implantation failures after conventional ICSI. However, it should be noted that there were clear trends for lower miscarriage rates (approximate to 50% reduced) and higher rates of ongoing pregnancy and live births (both nearly doubled) within the IMSI group. Further confirmation as well as randomized large-scale trials are needed to confirm the beneficial effects of IMSI in couples with poor reproductive prognoses.

Effects of angiotensin and vasopressin V-1 receptors on water and sodium intake induced by injection of vasopressin into lateral septal area

The specific arginine(8)-vasopressin (AVP) V, receptors antagonist (AAVP) was injected (20, 40 and 80 nmol) into the lateral septal area (LSA) to determine the effects of selective septal V, receptor on water and 3% sodium intake in rats. Was also observed the effects of losartan and CGP42112A (select ligands of the AT(1) and AT(2) ANG II receptors, respectively) injected into LSA prior AVP on the same appetites. Twenty-four hours before the experiments, the rats were deprived of water. The volume of drug solution injected was 0.5 mul. Water and sodium intake were measured at 0.25, 0.5, 1.0 and 2,0 h. Injection of AVP reduced the water and sodium ingestion vs. control (0.15 M saline). Pre-treatment with AAVP (40, 80 and 160 nmol) did not alter the decrease in the water ingestion induced by AVP, whereas AAVP abolished the action of AVP-induced sodium intake. Losartan (40, 80 and 160 nmol) did not alter the effect of AVP on water and sodium intake, whereas CGP42112A (20, 40 and 60 nmol) at the first 30 min increased water ingestion. Losartan and CGP42112A together increased the actions of AVP, showing more pronounced effects than when the two antagonists were injected alone. The results showed that AVP inhibited the appetites and these effects were increased by the AAVP. The involvement of angiotensinergic receptors in the effects of AVP is also suggested. (C) 2004 Elsevier B.V. All rights reserved.

Analysis of organochlorine pesticides in plain milk using direct injection on an ISRP column, with column switching

A simple and rapid procedure for extraction and separation from aldrin, DDT, endrin, heptachloro- and methoxychloro-organochlorine pesticides in raw milk has been developed by direct injection into an HPLC system without pretreatment of the samples, using an ISRP column.