Options for selecting dairy cattle for milk coagulation ability

Lypsylehmien maidon juoksettumiskyvyn jalostuskeinot Väitöskirjassa tutkittiin lypsylehmien maidon juustonvalmistuslaadun parantamista jalostusvalinnan avulla. Tutkimusaihe on tärkeä, sillä yhä suurempi osa maidosta käytetään juustonvalmistukseen. Tutkimuksen kohteena oli maidon juoksettumiskyky, sillä se on yksi keskeisistä juustomäärään vaikuttavista tekijöistä. Maidon juoksettumiskyky vaihteli huomattavasti lehmien, sonnien, karjojen, rotujen ja lypsykauden vaiheiden välillä. Vaikka tankkimaidon juoksettumiskyvyssä olikin suuria eroja karjoittain, karja selitti vain pienen osan juoksettumiskyvyn kokonaisvaihtelusta. Todennäköisesti perinnölliset erot lehmien välillä selittävät suurimman osan karjojen tankkimaitojen juoksettumiskyvyssä havaituista eroista. Hyvä hoito ja ruokinta vähensivät kuitenkin jossain määrin huonosti juoksettuvien tankkimaitojen osuutta karjoissa. Holstein-friisiläiset lehmät olivat juoksettumiskyvyltään ayrshire-rotuisia lehmiä parempia. Huono juoksettuminen ja juoksettumattomuus oli vain vähäinen ongelma holstein-friisiläisillä (10 %), kun taas kolmannes ayrshire-lehmistä tuotti huonosti juoksettuvaa tai juoksettumatonta maitoa. Maitoa sanotaan huonosti juoksettuvaksi silloin, kun juustomassa ei ole riittävän kiinteää leikattavaksi puolen tunnin kuluttua juoksetteen lisäyksestä. Juoksettumattomaksi määriteltävä maito ei saostu lainkaan puolen tunnin aikana ja on siksi erittäin huonoa raaka-ainetta juustomeijereille. Noin 40 % lehmien välisistä eroista maidon juoksettumiskyvyssä selittyi perinnöllisillä tekijöillä. Juoksettumiskykyä voikin sanoa hyvin periytyväksi ominaisuudeksi. Kolme mittauskertaa lehmää kohti riittää varsin hyvin lehmän maidon keskimääräisen juoksettumiskyvyn arvioimiseen. Tällä hetkellä juoksettumiskyvyn suoran jalostamisen ongelmana on kuitenkin automatisoidun, laajamittaiseen käyttöön soveltuvan mittalaitteen puute. Tämän takia väitöskirjassa tutkittiin mahdollisuuksia jalostaa maidon juoksettumiskykyä epäsuorasti, jonkin toisen ominaisuuden kautta. Tällaisen ominaisuuden pitää olla kyllin voimakkaasti perinnöllisesti kytkeytynyt juoksettumiskykyyn, jotta jalostus olisi mahdollista sen avulla. Tutkittavat ominaisuudet olivat sonnien kokonaisjalostusarvossa jo mukana olevat maitotuotos ja utareterveyteen liittyvät ominaisuudet sekä kokonaisjalostusarvoon kuulumattomat maidon valkuais- ja kaseiinipitoisuus sekä maidon pH. Väitöskirjassa tutkittiin myös mahdollisuuksia ns. merkkiavusteiseen valintaan tutkimalla maidon juoksettumattomuuden perinnöllisyyttä ja kartoittamalla siihen liittyvät kromosomialueet. Tutkimuksen tulosten perusteella lehmien utareterveyden jalostaminen parantaa jonkin verran myös maidon juoksettumiskykyä sekä vähentää juoksettumattomuutta ayrshire-rotuisilla lehmillä. Lehmien maitotuotos ja maidon juoksettumiskyky sekä juoksettumattomuus ovat sen sijaan perinnöllisesti toisistaan riippumattomia ominaisuuksia. Myöskin maidon valkuais- ja kaseiinipitoisuuden perinnöllinen yhteys juoksettumiskykyyn oli likimain nolla. Maidon pH:n ja juoksettumiskyvyn välillä oli melko voimakas perinnöllinen yhteys, joten maidon pH:n jalostaminen parantaisi myös maidon juoksettumiskykyä. Todennäköisesti sen jalostaminen ei kuitenkaan vähentäisi juoksettumatonta maitoa tuottavien lehmien määrää. Koska maidon juoksettumattomuus on niin yleinen ongelma suomalaisilla ayrshire-lehmillä, väitöksessä selvitettiin tarkemmin ilmiön taustoja. Kaikissa kolmessa tutkimusaineistoissa noin 10 % ayrshire-lehmistä tuotti juoksettumatonta maitoa. Kahden vuoden kuukausittaisen seurannan aikana osa lehmistä tuotti juoksettumatonta maitoa lähes joka mittauskerralla. Maidon juoksettumattomuus oli yhteydessä lypsykauden vaiheeseen, mutta mikään ympäristötekijöistä ei pystynyt täysin selittämään sitä. Sen sijaan viitteet sen periytyvyydestä vahvistuivat tutkimusten edetessä. Lopuksi tutkimusryhmä onnistui kartoittamaan juoksettumattomuutta aiheuttavat kromosomialueet kromosomeihin 2 ja 18, lähelle DNA-merkkejä BMS1126 ja BMS1355. Tulosten perusteella maidon juoksettumattomuus ei ole yhteydessä maidon juoksettumistapahtumassa keskeisiin kaseiinigeeneihin. Sen sijaan on mahdollista, että juoksettumattomuusongelman aiheuttavat kaseiinigeenien syntetisoinnin jälkeisessä muokkauksessa tapahtuvat virheet. Asia vaatii kuitenkin perusteellista tutkimista. Väitöksen tulosten perusteella maidon juoksettumattomuusgeeniä kantavien eläinten karsiminen jalostuseläinten joukosta olisi tehokkain tapa jalostaa maidon juoksettumiskykyä suomalaisessa lypsykarjapopulaatiossa.

The virulence of Finnish Pyrenophora teres f. teres isolates and its implications for resistance breeding

In Finland, barley, Hordeum vulgare L., covers 50 % of the total acreage devoted to cereal cultivation. The most common disease of barley in Finland is net blotch, a foliar disease caused by the ascomycete Pyrenophora teres Drechsler. Disease resistance based on plant genes is an environmentally friendly and economical way to manage plant diseases caused by biotic stresses. Development of a disease resistance breeding programme is dependent on knowledge of the pathogen. In addition to information on the epidemiology and virulence of a pathogen, knowledge on how the pathogen evolves and the nature of the risks that might arise in the future are essential issues that need to be taken into account to achieve the final breeding aims. The main objectives of this study were to establish reliable and efficient testing methods for Pyrenophora teres f. teres virulence screening, and to understand the role of virulence of P. teres f. teres in Finland from a disease resistance breeding point of view. The virulence of P. teres was studied by testing 239 Finnish P. teres f. teres isolates collected between 1994 2007 originating from 19 locations, and 200 P. teres progeny isolates originating from artificially produced P. teres matings. According to the results of this study, screening for P. teres f. teres isolates on barley seedlings under greenhouse conditions is a feasible and cost efficient method to describe the virulence spectrum of the pathogen. Inoculum concentration and the seedling leaf used to gauge virulence had significant effects. Barley grain size, morphological traits of P. teres isolates, spore production and growth rate on agar did not affect the expression of virulence. A common barley differential set to characterize the P. teres virulence was developed and is recommended to be used globally. The virulence spectrum of Finnish P. teres f. teres isolates collected in 1994-2007 was constant both within and between the years. The results indicated differences in the pathogen s aggressiveness and in barley genotypes resistance. However, differences in virulence were rarely significant. Unlike in laboratory conditions, no indications of changes in virulence caused by the sexual reproduction have been observed in Finnish barley fields. In Finland, durable net blotch resistance has been achieved by introducing resistance from other barley varieties using traditional crossing methods, including wide crossing, and testing the breeding material at early generations at several sites under natural infection pressure. Novel resistance is available, which is recommended to minimize the risk of selection of virulent isolates and breakdown of currently deployed resistance.

Northern challanges for profitable production of quality naked oat

Naked oat (Avena sativa f.sp. nuda L.) is the highest quality cereal in northern growing conditions. However the cultivation area of naked oat is remarkably small. Major challenges for naked oat production are to observe its nakedness. The caryopsis of naked oat is sensitive to mechanical damage at harvest, especially at high grain moisture content. The greater the grain moisture content of naked oat at harvest, the more loses of germination capacity was caused by threshing. For producing high quality naked oat seed, it is recommended that harvesting be done at as low grain moisture content as possible. However, if this is not possible, better germination can be ensure with gentle harvest by reducing the cylinder speed. In spite of conventional oat s excellent fat and amino acid composition in animal feed use, as far as nutritional value is concerned, the total energy yield of oat is weaker than other cereals because of the hulls. Also with naked oat the dehulling is not complete, while hull content on different cultivars mostly varied between one to six percent. In addition to genotype, environmental conditions markedly control the expression of nakedness. Thresher settings had only limited effects on hull content. The function of hulls is to protect the groat, but this was confirmed only for Finnish, small grain, cultivar Lisbeth. The oat kernel is generally covered with fine silky hairs termed trichomes. The trichomes of naked oat are partly lost during threshing and handling of grains. Trichomes can cause itchiness in those handling the grains and also accumulate and form fine dust and can block-up machinery. The cultivars differed considerably in pubescence. Some thresher settings, including increased cylinder speed, slightly increased grain polishing such that grains had some areas completely free of trichomes. Adjusting thresher settings was generally not an efficient means of solving the problems associated with naked oat trichomes. The main differences in cultivation costs between naked and conventional oat lie in the amount of seeds required and the drying costs. The main differences affecting the economic result lie in market prices, yield level and feed value. The results indicate that naked oat is financially more profitable than conventional oat, when the crop is sold at a specific price at all yield levels and when the crop is used as feed at highest yield level. At lower yield levels, conventional oat is, in spite of its lower feed value, the more profitable option for feed use. Dehulled oat did not achieve the same economic result as naked oat, as the cost of dehulling, including the hull waste, was considerable. According to this study naked oat can be cultivated successfully under northern conditions, when taking into consideration the soft, naked grain through cultivation chain.

Vadelman (Rubus idaeus) kasvunsäätö proheksadioni-kalsiumin avulla

Vadelman (Rubus idaeus L.) viljelyala on kasvanut Suomessa voimakkaasti viimeisten viiden vuoden aikana. Vuonna 2005 vadelmaa viljeltiin 473 hehtaarilla. Vadelman satoindeksi on alhainen. Sen pääverso on pitkä, mikä hankaloittaa hoitotoimenpiteitä. Kasvin satoisimmat silmut ovat pääverson kärjessä, joten latvontaa ei kannata tehdä. Suomessakin haluttaisiin kehittää vadelman kasvihuonetuotantoa satokauden pidentämiseksi. Kasvihuonetuotannossa vegetatiivisen kasvun säätäminen on vielä tärkeämpää kuin avomaan viljelyssä. Proheksadioni-kalsium (ProCa) on gibberelliinisynteesi-inhibiittori, jonka on havaittu lyhentävän nivelvälejä sekä lisäävän versojen ja lehtien hiilihydraattipitoisuutta mm. omenalla (Malus domestica Borkh.). Tämän Helsingin yliopiston soveltavan biologian laitoksella toteutetun tutkimuksen tarkoituksena oli selvittää, miten ProCa vaikuttaa kahden kesävadelmalajikkeen ensimmäisen vuoden versojen vegetatiiviseen kasvuun ja edelleen sadontuottokykyyn. Tässä pro gradu -työssä tutkittiin ProCa:n vaikutusta kahden kesävadelmalajikkeen vegetatiiviseen kasvuun, satopotentiaaliin sekä versojen ja silmujen hiilihydraattipitoisuuksiin kesällä 2005 ja talvella 2006. Koetaimina oli 120 Tulameen-lajikkeen ja 150 Glen Ample -lajikkeen tainta. Taimet käsiteltiin kesäkuussa ja käsittely uusittiin osalle taimista neljän viikon kuluttua ensimmäisestä käsittelystä. Koekäsittelyitä oli neljä: ProCa 100 ppm, ProCa 200 ppm, ProCa 100 ppm + ProCa 100 ppm ja ProCa 200 ppm + ProCa 200 ppm. Kontrollikäsittelyitä oli kaksi: vesi sekä vesi + vesi. Kesän aikana havainnoitiin pääverson pituuskasvua ja nivelien määrää. Kesän kasvatuskauden päätyttyä Glen Ample -lajikkeen silmujen ja versojen liukoiset hiilihydraatit ja tärkkelys määritettiin entsymaattisesti. Kylmävarastoinnin jälkeen (71 vrk) tammikuussa 2006 taimet siirrettiin hyötöön kasvihuoneeseen. Hyödön aikana havainnoitiin silmujen puhkeamista ja kukintaa. Hyödön päättyessä hanka- ja pääversojen kuivapaino sekä hankaversojen pituus mitattiin. Kesän 2005 aikana ProCa lyhensi uusien nivelvälien pituuksia väliaikaisesti 1 4 viikon kuluttua käsittelystä. Nivelien lukumäärässä ei tapahtunut suuria muutoksia. Tulameen-lajikkeella kasvu kiihtyi käsittelyn vaikutuksen loputtua. Nivelvälien lyhentymisen takia pääverson kokonaispituus jäi kontrolliin verrattuna 35 % lyhyemmäksi Glen Ample -lajikkeella (ProCa 200 + ProCa 200) ja 14 % lyhyemmäksi Tulameen-lajikkeella samalla käsittelyllä. Myös käsittely ProCa 200 vähensi pääverson pituutta 6 % kontrolliin verrattuna Tulameen-lajikkeella. ProCa-käsittely lisäsi versojen ja silmujen hiilihydraattipitoisuuksia, mutta tuloksissa oli paljon hajontaa. Glen Ample -lajikkeella kaksinkertaiset käsittelyt vähensivät puhjenneiden silmujen osuutta 8 15 päivän kuluttua hyödön aloittamisesta 24 29 %, mutta käsittelyiden väliset erot tasoittuivat hyödön loppuun mennessä. Lisäksi kaksinkertaiset ProCa-käsittelyt vähensivät kukkien määrää 29 44 % 33 65 päivää hyödön alusta, mutta erot tasoittuivat hyödön loppuun mennessä. Käsittelyt eivät vaikuttaneet Tulameen-lajikkeen silmujen puhkeamiseen ja kukintaan. Satopotentiaalissa ei ollut eroa ProCa-käsittelyiden välillä kummallakaan lajikkeella. Glen Ample -lajikkeella hankaversojen kokonaismäärä väheni 27 32 % kasveilla, joita oli käsitelty kaksi kertaa ProCa:lla. Hankaversot olivat kuitenkin vastaavasti 29 43 % pidempiä. Tulameen-lajikkeella ProCa 100 -käsittely vähensi hankaversojen määrää 15 %, mutta hankaversojen pituuteen käsittelyillä ei ollut vaikutusta. Käsittelyillä ei ollut vaikutusta hankaversojen nivelvälien pituuteen kummallakaan lajikkeella. Tutkimuksen perusteella kesällä annetulla ProCa-käsittelyllä voidaan lyhentää pääverson pituutta, mutta satopotentiaaliin käsittelyllä ei ole vaikutusta. Käsittelyajankohta on kriittinen, koska kukkasilmujen kehitys näyttäisi häiriintyvän, jos ruiskutus tehdään loppukesällä.

Valikoivan metsästyksen vaikutus hirven ikärakenteeseen ja vasatuottoon Savonrannan ja Sodankylän riistanhoitoyhdistysten alueilla

Suomen hirvenmetsästykseen omaksuttiin 1970-luvun alussa valikoivan metsästyksen periaatteet, joiden tavoitteena oli maksimoida vasatuotto hirvikannan ikärakennetta muuttamalla. Metsästysstrategiassa tapahtui huomattava muutos, kun hirvisaaliin vasaosuutta lisättiin selvästi. Tämän seurauksena naarashirvien keski-ikä ja vasatuotto kohosivat. Vasojen suuri osuus saaliissa oli keskeinen tekijä hirvikannan rajuun kasvuun. Tämän opinnäytetyön tavoitteena oli selvittää saaliin vasaosuuden vaikutusta hirven ikärakenteeseen ja vasatuottoon Savonrannan ja Sodankylän riistanhoitoyhdistysten alueilla. Tutkimusalueet valittiin hyvin erilaisten hirvisaaliin vasaosuuksien perusteella, sillä Savonrannan vuosien 1994-2003 saaliin vasaosuuden keskiarvo oli 50,1 % ja Sodankylän 19,6 %. Tutkimuksen ennakko-olettamuksena oli, että erilaisten saaliin vasaosuuksien pitäisi vaikuttaa aikuistuvan ikäluokan suhteellisen osuuden kautta hirvipopulaation keski-ikään ja sitä kautta vasatuottoon. Ikärakenteen osalta tutkittiin naaraiden, valtasonnien eli 6,5-9,5-vuotiaiden uroshirvien ja vähintään 8-piikkisten urosten ikärakennetta. Tutkimus rakentui hirven iänmääritysaineiston ympärille, joka kerättiin Savonrannan ja Sodankylän riistanhoitoyhdistysten hirvenmetsästäjien avustuksella vuosina 2003 ja 2004. Iänmääritysaineistossa oli yhteensä 244 hirveä. Näistä oli naaraita 152 ja uroksia 92 kpl. Hirven ikärakennetietojen saamiseksi suoritti tutkimuksen tekijä iänmäärityksen hammasnäytteistä. Iänmääritys tehtiin hammassementtikerroksiin perustuvaa menetelmää käyttäen, jota varten sahattiin poikittaisia hammasleikkeitä hirven ensimmäisestä etuhampaasta (I1). Tutkimuksen aineistoon kuuluivat myös Savonrannan ja Sodankylän hirvihavaintokorttien perusteella saadut vasatuottotiedot vuosilta 1995- 2004 ja Riistawebin saalistiedot vuosilta 1994-2003. Tutkimuksen perusteella hirvisaaliin vasaosuus vaikuttaa Savonrannan ja Sodankylän riistanhoitoyhdistysten naaraiden ikärakenteeseen. Kaksivuotisesta aineistosta saatiin Savonrannan naaraiden keski-iäksi 6,40 vuotta. Sodankylän naaraiden keski-ikä oli 5,09 vuotta. Myös naaraiden ikäjakaumat olivat hyvin erilaiset. Hirvisaaliin vasaosuus ei sen sijaan vaikuta Savonrannan ja Sodankylän valtasonnien ja vähintään 8-piikkisten urosten ikärakenteeseen. Savonrannan valtasonnien keski-ikä oli 7,21 vuotta ja Sodankylän 7,07 vuotta. Savonrannan vähintään 8-piikkisten urosten keski-ikä oli 5,82 vuotta ja Sodankylän 5,91 vuotta. Tutkimuksella saatiin selville saaliin ikärakenne, elävän hirvikannan ikärakenteen tutkiminen vaatii laajempia tutkimuksia. Hirvisaaliin vasaosuus vaikuttaa Savonrannan ja Sodankylän riistanhoitoyhdistysten vasatuottoon. Naaraiden ikärakenteen erot näkyivät osaltaan hirvihavaintokorttien ja näytenaaraiden perusteella lasketuissa vasatuottotiedoissa. Saaliin vasaosuus vaikuttaa välillisesti hirven vasatuottoon, sillä se vaikuttaa ensin naaraiden ikärakenteeseen, joka vaikuttaa edelleen vasatuottoon.

Plant secondary compounds and soil microbial processes in carbon and nitrogen cycling in relation to tree species

The aim of this study was to explore soil microbial activities related to C and N cycling and the occurrence and concentrations of two important groups of plant secondary compounds, terpenes and phenolic compounds, under silver birch (Betula pendula Roth), Norway spruce (Picea abies (L.) Karst) and Scots pine (Pinus sylvestris L.) as well as to study the effects of volatile monoterpenes and tannins on soil microbial activities. The study site, located in Kivalo, northern Finland, included ca. 70-year-old adjacent stands dominated by silver birch, Norway spruce and Scots pine. Originally the soil was very probably similar in all three stands. All forest floor layers (litter (L), fermentation layer (F) and humified layer (H)) under birch and spruce showed higher rates of CO2 production, greater net mineralisation of nitrogen and higher amounts of carbon and nitrogen in microbial biomass than did the forest floor layers under pine. Concentrations of mono-, sesqui-, di- and triterpenes were higher under both conifers than under birch, while the concentration of total water-soluble phenolic compounds as well as the concentration of condensed tannins tended to be higher or at least as high under spruce as under birch or pine. In general, differences between tree species in soil microbial activities and in concentrations of secondary compounds were smaller in the H layer than in the upper layers. The rate of CO2 production and the amount of carbon in the microbial biomass correlated highly positively with the concentration of total water-soluble phenolic compounds and positively with the concentration of condensed tannins. Exposure of soil to volatile monoterpenes and tannins extracted and fractionated from spruce and pine needles affected carbon and nitrogen transformations in soil, but the effects were dependent on the compound and its molecular structure. Monoterpenes decreased net mineralisation of nitrogen and probably had a toxic effect on part of the microbial population in soil, while another part of the microbes seemed to be able to use monoterpenes as a carbon source. With tannins, low-molecular-weight compounds (also compounds other than tannins) increased soil CO2 production and nitrogen immobilisation by soil microbes while the higher-molecular-weight condensed tannins had inhibitory effects. In conclusion, plant secondary compounds may have a great potential in regulation of C and N transformations in forest soils, but the real magnitude of their significance in soil processes is impossible to estimate.

Extraction methods in soil phosphorus characterisation : Limitations and applications

The quantification and characterisation of soil phosphorus (P) is of agricultural and environmental importance and different extraction methods are widely used to asses the bioavailability of P and to characterize soil P reserves. However, the large variety of extractants, pre-treatments and sample preparation procedures complicate the comparison of published results. In order to improve our understanding of the behaviour and cycling of P in soil, it is crucial to know the scientific relevance of the methods used for various purposes. The knowledge of the factors affecting the analytical outcome is a prerequisite for justified interpretation of the results. The aim of this thesis was to study the effects of sample preparation procedures on soil P and to determine the dependence of the recovered P pool on the chemical nature of extractants. Sampling is a critical step in soil testing and sampling strategy is dependent on the land-use history and the purpose of sampling. This study revealed that pre-treatments changed soil properties and air-drying was found to affect soil P, particularly extractable organic P, by disrupting organic matter. This was evidenced by an increase in the water-extractable small-sized (<0.2 µm) P that, at least partly, took place at the expense of the large-sized (>0.2 µm) P. However, freezing induced only insignificant changes and thus, freezing can be taken to be a suitable method for storing soils from the boreal zone that naturally undergo periodic freezing. The results demonstrated that chemical nature of the extractant affects its sensitivity to detect changes in soil P solubility. Buffered extractants obscured the alterations in P solubility induced by pH changes; however, water extraction, though sensitive to physicochemical changes, can be used to reveal short term changes in soil P solubility. As for the organic P, the analysis was found to be sensitive to the sample preparation procedures: filtering may leave a large proportion of extractable organic P undetected, whereas the outcome of centrifugation was found to be affected by the ionic strength of the extractant. Widely used sequential fractionation procedures proved to be able to detect land-use -derived differences in the distribution of P among fractions of different solubilities. However, interpretation of the results from extraction experiments requires better understanding of the biogeochemical function of the recovered P fraction in the P cycle in differently managed soils under dissimilar climatic conditions.

Characterization of lignin-modifying enzymes of the selective white-rot fungus Physisporinus rivulosus

White-rot fungi are wood degrading organisms that are able to decompose all wood polymers; lignin, cellulose and hemicellulose. Especially the selective white-rot fungi that decompose preferentially wood lignin are promising for biopulping applications. In biopulping the pretreatment of wood chips with white-rot fungi enhances the subsequent pulping step and substantially reduces the refining energy consumption in mechanical pulping. Because it is not possible to carry out biopulping in industrial scale as a closed process it has been necessary to search for new selective strains of white-rot fungi which naturally occur in Finland and cause selective white-rot of Finnish wood raw-material. In a screening of 300 fungal strains a rare polypore, Physisporinus rivulosus strain T241i isolated from a forest burn research site, was found to be a selective lignin degrader and promising for the use in biopulping. Since selective lignin degradation is apparently essential for biopulping, knowledge on lignin-modifying enzymes and the regulation of their production by a biopulping fungus is needed. White-rot fungal enzymes that participate in lignin degradation are laccase, lignin peroxidase (LiP), manganese peroxidase (MnP), versatile peroxidase (VP) and hydrogen peroxide forming enzymes. In this study, P. rivulosus was observed to produce MnP, laccase and oxalic acid during growth on wood chips. In liquid cultures manganese and veratryl alcohol increased the production of acidic MnP isoforms detected also in wood chip cultures. Laccase production by P. rivulosus was low unless the cultures were supplemented with sawdust and charred wood, the components of natural growth environment of the fungus. In white-rot fungi the lignin-modifying enzymes are typically present as multiple isoforms. In this study, two MnP encoding genes, mnpA and mnpB, were cloned and characterized from P. rivulosus T241i. Analysis of the N-terminal amino acid sequences of two purified MnPs and putative amino acid sequence of the two cloned mnp genes suggested that P. rivulosus possesses at least four mnp genes. The genes mnpA and mnpB markedly differ from each other by the gene length, sequence and intron-exon structure. In addition, their expression is differentially affected by the addition of manganese and veratryl alcohol. P. rivulosus produced laccase as at least two isoforms. The results of this study revealed that the production of MnP and laccase was differentially regulated in P. rivulosus, which ensures the efficient lignin degradation under a variety of environmental conditions.

Tuotantotekniikan ja säilytysajan vaikutus kasvihuonekurkkujen ja -tomaattien aistittavaan laatuun.

Finland has moved from growing vegetables by natural light to year-round greenhouse production using artificial lighting. Determination of sensory effects on greenhouse-grown vegetables is important as sensory evaluation provides information which chemical methods can not. It can tell us about the quality of samples which affects the consumers' behaviour. There are different opinions on how the quality of vegetables should be determined. The consumers are dissatisfied with the quality of vegetables and fruits, although the variety of products is larger than ever. The aim of this study was to find out how artificial lighting contributes to the sensory quality of greenhouse tomatoes and cucumbers compared to traditional natural lighting, and how storage affects the sensory attributes of the samples. In this study there were two sets of tomatoes and two sets of cucumbers, representing two different harvest seasons. Sensory evaluation involved two steps. The first step was to sort the samples and the second step was to generate a profile using descriptive analysis. Sorting was found to give some approximate information on differences between tomato and cucumber samples. MDS-maps dimensions were presented by age and lighting technique. The reliability of sorting results was quite good. The quality of the natural products was inconsistent. Production technology had more of an effect on cucumber samples than tomato samples. Natural light cucumbers were, for example sweeter and softer than artificial light cucumbers. Age had an especially large effect on cucumber appearance characteristics. There were less differences between tomato samples than cucumber samples. Production technology had less of an effect on tomato samples than age, e.g. hardness decreased during storage. In this study, it was found that artificial lighting has little effect on the sensory quality of Finnish greenhouse tomatoes compared with tomatoes grown under natural light.

Entsymaattisen hydrolyysin vaikutuksista mikrokiteisen selluloosan rakenteeseen

Cellulose can be used as a renewable raw material for energy production. The utilization requires degradation of cellulose into glucose, which can be done with the aid of enzymatic hydrolysis. In this thesis, various x-ray methods were used to characterize sub-micrometer changes in microcrystalline cellulose during enzymatic hydrolysis to clarify the process and factors slowering it. The methods included wide-angle x-ray scattering (WAXS), small-angle x-ray scattering (SAXS) and x-ray microtomography. In addition, the samples were studied with transmission electron microscopy (TEM). The studied samples were hydrolyzed by enzymes of the Trichoderma reesei species for 6, 24, and 75 hours, which corresponded to 31 %, 58 %, and 68 % degrees of hydrolysis, respectively. Freeze-dried hydrolysis residues were measured with WAXS, SAXS and microtomography, whereas some of them were re-wetted for the wet SAXS and TEM measurements. The microtomography measurements showed a clear decrease in particle size in scale of tens of micrometers. In all the TEM pictures similar cylindrical and partly ramified structures were observed, independent of the hydrolysis time. The SAXS results were ambiguous and partly imprecise, but showed a change in the structure of wet samples in scale of 10-30 nm. According to the WAXS results, the degrees of crystallinity and the crystal sizes remained the same. The gained results support the assuption, that the cellulosic particles are hydrolyzed mostly on their surface, since the enzymes are unable to penetrate into the nanopores of wet cellulose. The hydrolysis therefore proceeds quickly in easily accessible particles and leaves the unaccesible particles almost untouched. The structural changes observed in the SAXS measurements might correspond to slight loosening of the microfibril aggregates, which was seen only in the wet samples because of their different pore structure.

Lumi ilmaston osana - Lumen vesiarvon ja pinnan albedon mallintaminen Pohjois-Euraasian alueella

Työssä tarkasteltiin ilmakehän yleisen kiertoliikkeen mallin, ECHAM5:n, ja Euroopan keskipitkien sääennusteiden keskuksen uudelleenanalyysijärjestelmän, ERA-40:n, lumen vesiarvon ja lumisten alueiden pinnan albedon mallintamista. Tarkoituksena oli selvittää näiden välisiä eroja sekä sitä, kuinka hyvin ECHAM5 kuvaa nykyilmaston lumioloja. Esimerkinomaisesti tarkasteltiin myös Rossby-keskuksen alueellisen ilmastomallin, RCA3:n, lumen mallintamistapaa. ECHAM5-simulaatioissa käytetty pakote oli havaintojen mukainen meriveden pintalämpötilan ja merijään jakauma. ECHAM5:n ja ERA-40:n aineistoja vertailtiin jaksolla 1986-1990 Pohjois-Euraasian alueella. ERA-40:n lumen vesiarvoja verrattiin lisäksi INTAS-SCCONE-hankkeen havaintoaineistoon. Saatujen tulosten mukaan ECHAM5:n lumen vesiarvo oli monilla alueilla ERA-40:n lumen vesiarvoa pienempi. Suurimmillaan erot olivat vesiarvon maksimialueilla Euraasian keskiosissa. ECHAM5:ssä myös eri vuosien välinen vaihtelu oli pienempää kuin ERA-40:ssä. Varsinkin tarkastelujakson viimeisinä vuosina, 1989 ja 1990, lumen vesiarvo sai Pohjois-Euroopan alueella ERA-40:n mukaan hyvin matalia arvoja, jotka selittyvät NAO-indeksin korkeilla arvoilla. NAO-ilmiön voimakkuus 1980-luvun lopulla ei kuitenkaan erotu ECHAM5:n lumen vesiarvossa. ERA-40:n lumianalyysissä on mukana lumensyvyyshavaintoja, mikä on suurin tuloksiin eroa aiheuttava tekijä. Lienee myös mahdollista, että ECHAM5-simulaatioissa käytetty pakote ei ole riittävän voimakas tuottamaan kaikilta osin realistista lumen vesiarvon jakaumaa. ERA-40:n ja INTAS-SCCONE-aineiston välillä ei ollut kovin suuria eroja. Lumisten alueiden pinnan albedon osana käytetty lumialbedo on ERA-40:ssä ennustettava muuttuja, ECHAM5:ssä se parametrisoidaan. Saatujen tulosten mukaan pinnan albedon arvot ovat ECHAM5:ssä laajalti suurempia kuin ERA-40:ssä. Erot aiheutuvat albedojen erilaisesta laskentatavasta sekä mallien erilaisista kasvillisuusjakaumista. ECHAM5 aliarvioi kasvillisuuden albedoa pienentävän vaikutuksen varsinkin pohjoisen havumetsävyöhykkeen alueella. ERA-40:n pinnan albedo lieneekin realistisempi kuin ECHAM5:n.

Suomen maankuoren kivilajikoostumuksen tulkinta seismisistä aineistoista

Aim of this study is to investigate composition of the crust in Finland using seismic wide-angle velocity models and laboratory measurements on P- and S-wave velocities of different rock types. The velocities adopted from wide-angle velocity models were compared with laboratory velocities of different rock types corrected for the crustal PT conditions in the study area. The wide-angle velocity models indicate that the P-wave velocity does not only increase step-wise at boundaries of major crustal layers, but there is also gradual increase of velocity within the layers. On the other hand, the laboratory measurements of velocities indicate that no single rock type is able to provide the gradual downward increasing trends. Thus, there must be gradual vertical changes in rock composition. The downward increase of velocities indicates that the composition of the crust becomes gradually more mafic with increasing depth. Even though single rock types cannot simulate the wide-angle model velocities, it can be done with a mixture of rock types. There are a large number of rock type mixtures giving the correct P-wave velocities. Therefore, the inverse solution of rock types and their proportions from velocities is a non-unique problem if only P-wave velocities is available. Amount of the possible rock type mixtures can be limitted using S-wave velocities, reflection seismic results and other geological and geophysical results of the study area. Crustal model FINMIX-2 is presented in this study and it suggest that the crustal velocity profiles can be simulated with rock type mixtures, where the upper crust consists of felsic gneisses and granitic-granodioritic rocks with a minor contribution of quartzite, amphibolite and diabase. In the middle crust the amphibolite proportion increases. The lower crust consists of tonalitic gneiss, mafic garnet granulite, hornblendite, pyroxenite and minor mafic eclogite. This composition model is in agreement with deep crustal kimberlite-hosted xenolith data in eastern Finland and reflectivity of the FIRE (Finnish Reflection Experiment). According to FINMIX-2 model the Moho is deeper and the crustal composition is a more mafic than an average global continental model would suggest. Composition models of southern Finland are quite similar than FINMIX-2 model. However, there are minor differencies between the models, which indicates areal differences of composition. Models of northern Finland shows that the crustal thickness is smaller than southern Finland and composition of the upper crust is different. Density profiles calculated from the lithological models suggest that there is practically no density contrast at Moho in areas of the high-velocity lower crust. This implies that crustal thickness in the central Fennoscandian Shield may have been controlled by the densities of the lower crustal and upper mantle rocks.

Spatial variation of climate and the impact of disturbances on local climate and forest recovery in northern Finland

The structure and function of northern ecosystems are strongly influenced by climate change and variability and by human-induced disturbances. The projected global change is likely to have a pronounced effect on the distribution and productivity of different species, generating large changes in the equilibrium at the tree-line. In turn, movement of the tree-line and the redistribution of species produce feedback to both the local and the regional climate. This research was initiated with the objective of examining the influence of natural conditions on the small-scale spatial variation of climate in Finnish Lapland, and to study the interaction and feedback mechanisms in the climate-disturbances-vegetation system near the climatological border of boreal forest. The high (1 km) resolution spatial variation of climate parameters over northern Finland was determined by applying the Kriging interpolation method that takes into account the effect of external forcing variables, i.e., geographical coordinates, elevation, sea and lake coverage. Of all the natural factors shaping the climate, the geographical position, local topography and altitude proved to be the determining ones. Spatial analyses of temperature- and precipitation-derived parameters based on a 30-year dataset (1971-2000) provide a detailed description of the local climate. Maps of the mean, maximum and minimum temperatures, the frost-free period and the growing season indicate that the most favourable thermal conditions exist in the south-western part of Lapland, around large water bodies and in the Kemijoki basin, while the coldest regions are in highland and fell Lapland. The distribution of precipitation is predominantly longitudinally dependent but with the definite influence of local features. The impact of human-induced disturbances, i.e., forest fires, on local climate and its implication for forest recovery near the northern timberline was evaluated in the Tuntsa area of eastern Lapland, damaged by a widespread forest fire in 1960 and suffering repeatedly-failed vegetation recovery since that. Direct measurements of the local climate and simulated heat and water fluxes indicated the development of a more severe climate and physical conditions on the fire-disturbed site. Removal of the original, predominantly Norway spruce and downy birch vegetation and its substitution by tundra vegetation has generated increased wind velocity and reduced snow accumulation, associated with a large variation in soil temperature and moisture and deep soil frost. The changed structural parameters of the canopy have determined changes in energy fluxes by reducing the latter over the tundra vegetation. The altered surface and soil conditions, as well as the evolved severe local climate, have negatively affected seedling growth and survival, leading to more unfavourable conditions for the reproduction of boreal vegetation and thereby causing deviations in the regional position of the timberline. However it should be noted that other factors, such as an inadequate seed source or seedbed, the poor quality of the soil and the intensive logging of damaged trees could also exacerbate the poor tree regeneration. In spite of the failed forest recovery at Tunsta, the position and composition of the timberline and tree-line in Finnish Lapland may also benefit from present and future changes in climate. The already-observed and the projected increase in temperature, the prolonged growing season, as well as changes in the precipitation regime foster tree growth and new regeneration, resulting in an advance of the timberline and tree-line northward and upward. This shift in the distribution of vegetation might be decelerated or even halted by local topoclimatic conditions and by the expected increase in the frequency of disturbances.

Integration of natural hazards, risk and climate change into spatial planning practices

Most countries of Europe, as well as many countries in other parts of the world, are experiencing an increased impact of natural hazards. It is often speculated, but not yet proven, that climate change might influence the frequency and magnitude of certain hydro-meteorological natural hazards. What has certainly been observed is a sharp increase in financial losses caused by natural hazards worldwide. Eventhough Europe appears to be a space that is not affected by natural hazards to such catastrophic extents as other parts of the world are, the damages experienced here are certainly increasing too. Natural hazards, climate change and, in particular, risks have therefore recently been put high on the political agenda of the EU. In the search for appropriate instruments for mitigating impacts of natural hazards and climate change, as well as risks, the integration of these factors into spatial planning practices is constantly receiving higher attention. The focus of most approaches lies on single hazards and climate change mitigation strategies. The current paradigm shift of climate change mitigation to adaptation is used as a basis to draw conclusions and recommendations on what concepts could be further incorporated into spatial planning practices. Especially multi-hazard approaches are discussed as an important approach that should be developed further. One focal point is the definition and applicability of the terms natural hazard, vulnerability and risk in spatial planning practices. Especially vulnerability and risk concepts are so many-fold and complicated that their application in spatial planning has to be analysed most carefully. The PhD thesis is based on six published articles that describe the results of European research projects, which have elaborated strategies and tools for integrated communication and assessment practices on natural hazards and climate change impacts. The papers describe approaches on local, regional and European level, both from theoretical and practical perspectives. Based on these, passed, current and future potential spatial planning applications are reviewed and discussed. In conclusion it is recommended to shift from single hazard assessments to multi-hazard approaches, integrating potential climate change impacts. Vulnerability concepts should play a stronger role than present, and adaptation to natural hazards and climate change should be more emphasized in relation to mitigation. It is outlined that the integration of risk concepts in planning is rather complicated and would need very careful assessment to ensure applicability. Future spatial planning practices should also consider to be more interdisciplinary, i.e. to integrate as many stakeholders and experts as possible to ensure the sustainability of investments.

Topographical, structural and geophysical characterization of fracture zones: implications for groundwater flow and vulnerability

The main objective of this study is to evaluate selected geophysical, structural and topographic methods on regional, local, and tunnel and borehole scales, as indicators of the properties of fracture zones or fractures relevant to groundwater flow. Such information serves, for example, groundwater exploration and prediction of the risk of groundwater inflow in underground construction. This study aims to address how the features detected by these methods link to groundwater flow in qualitative and semi-quantitative terms and how well the methods reveal properties of fracturing affecting groundwater flow in the studied sites. The investigated areas are: (1) the Päijänne Tunnel for water-conveyance whose study serves as a verification of structures identified on regional and local scales; (2) the Oitti fuel spill site, to telescope across scales and compare geometries of structural assessment; and (3) Leppävirta, where fracturing and hydrogeological environment have been studied on the scale of a drilled well. The methods applied in this study include: the interpretation of lineaments from topographic data and their comparison with aeromagnetic data; the analysis of geological structures mapped in the Päijänne Tunnel; borehole video surveying; groundwater inflow measurements; groundwater level observations; and information on the tunnel s deterioration as demonstrated by block falls. The study combined geological and geotechnical information on relevant factors governing groundwater inflow into a tunnel and indicators of fracturing, as well as environmental datasets as overlays for spatial analysis using GIS. Geophysical borehole logging and fluid logging were used in Leppävirta to compare the responses of different methods to fracturing and other geological features on the scale of a drilled well. Results from some of the geophysical measurements of boreholes were affected by the large diameter (gamma radiation) or uneven surface (caliper) of these structures. However, different anomalies indicating more fractured upper part of the bedrock traversed by well HN4 in Leppävirta suggest that several methods can be used for detecting fracturing. Fracture trends appear to align similarly on different scales in the zone of the Päijänne Tunnel. For example, similarities of patterns were found between the regional magnetic trends, correlating with orientations of topographic lineaments interpreted as expressions of fracture zones. The same structural orientations as those of the larger structures on local or regional scales were observed in the tunnel, even though a match could not be made in every case. The size and orientation of the observation space (patch of terrain at the surface, tunnel section, or borehole), the characterization method, with its typical sensitivity, and the characteristics of the location, influence the identification of the fracture pattern. Through due consideration of the influence of the sampling geometry and by utilizing complementary fracture characterization methods in tandem, some of the complexities of the relationship between fracturing and groundwater flow can be addressed. The flow connections demonstrated by the response of the groundwater level in monitoring wells to pressure decrease in the tunnel and the transport of MTBE through fractures in bedrock in Oitti, highlight the importance of protecting the tunnel water from a risk of contamination. In general, the largest values of drawdown occurred in monitoring wells closest to the tunnel and/or close to the topographically interpreted fracture zones. It seems that, to some degree, the rate of inflow shows a positive correlation with the level of reinforcement, as both are connected with the fracturing in the bedrock. The following geological features increased the vulnerability of tunnel sections to pollution, especially when several factors affected the same locations: (1) fractured bedrock, particularly with associated groundwater inflow; (2) thin or permeable overburden above fractured rock; (3) a hydraulically conductive layer underneath the surface soil; and (4) a relatively thin bedrock roof above the tunnel. The observed anisotropy of the geological media should ideally be taken into account in the assessment of vulnerability of tunnel sections and eventually for directing protective measures.