The kinetics and induced decomposition on the thermal decomposition of hydroperoxides /

This project is focussed on the thermsLl decomposition of t-butyl hydroperoxide and sec-butyl hydroperoxide at 120°C to 160°C in three alcohol solvents. These are methanol, ethajiol and isopropyl alcohol. The aim of the project was to examine the process of induced decomposition. Thermal decomposition of t-hutyl hydroperoxide and sec-butyl hydroperoxide indicate that these reactions have first-order kinetics with activation energies on the order of 20 to 28 K cal/mole, Styrene was used as a free radical trap to inhibit the induced decomposition. The results permitted calculation of how much induced decomposition occurred in its absence. The experimental resvilts indicate that the induced decomposition is important for t-butyl hydroperoxide in alcohol solvents, as shown by both the reaction rate suid product studies. But sec-butyl hydroperoxide results show that the concerted mechanism for the interaction of two sec-butylperoxy radicals occurs in addition to the induced decomposition. Di-sodium E.D,T.A. was added to reduce possible effects of trace transition metal ion .impurities. The result of this experiment were not as expected. The rate of hydroperoxide decomposition was about the same but was zero-order in hydroperoxide concentration.

Pantoprazole intraveineux aux soins intensifs pédiatriques: un modèle de pharmacocinétique de population

Objectifs : Définir les paramètres pharmacocinétiques du pantoprazole intraveineux en soins intensifs pédiatriques et déterminer l’influence qu’exercent sur ceux-ci les facteurs démographiques, le syndrome de réponse inflammatoire systémique (SRIS), la dysfonction hépatique et l’administration d’un inhibiteur du cytochrome (CYP) 2C19. Méthode : Cent cinquante-six concentrations plasmatiques de pantoprazole provenant d’une population de 20 patients (âgés de 10 jours à 16.4 ans) à risque ou atteints d’une hémorragie gastroduodénale de stress, ayant reçu des doses quotidiennes de pantoprazole de 19.9 à 140.6 mg/1.73m2, ont été analysées selon les méthodes non compartimentale et de modélisation non linéaire à effets mixtes. Résultats : Une clairance médiane (CL) de 0.14 L/h/kg, un volume apparent de distribution de 0.20 L/kg et une demi-vie d’élimination de 1.7 h ont été déterminés via l’approche non compartimentale. Le modèle populationnel à deux compartiments avec une infusion d’ordre zéro et une élimination d’ordre un représentait fidèlement la cinétique du pantoprazole. Le poids, le SRIS, la dysfonction hépatique et l’administration d’un inhibiteur du CYP2C19 constituaient les covariables significatives rendant compte de 75 % de la variabilité interindividuelle observée pour la CL. Seul le poids influençait significativement le volume central de distribution (Vc). Selon les estimations du modèle final, un enfant de cinq ans pesant 20 kg avait une CL de 5.28 L/h et un Vc de 2.22 L. La CL du pantoprazole augmentait selon l’âge et le poids tandis qu’elle diminuait respectivement de 62.3%, 65.8% et 50.5% en présence d’un SRIS, d’un inhibiteur du CYP2C19 ou d’une dysfonction hépatique. Conclusion : Ces résultats permettront de guider les cliniciens dans le choix d’une dose de charge et dans l’ajustement des posologies du pantoprazole en soins intensifs pédiatriques dépendamment de facteurs fréquemment rencontrés dans cette population.

Molecular mechanisms for a switch-like mating decision in Saccharomyces cerevisiae

Les changements évolutifs nous instruisent sur les nombreuses innovations permettant à chaque organisme de maximiser ses aptitudes en choisissant le partenaire approprié, telles que les caractéristiques sexuelles secondaires, les patrons comportementaux, les attractifs chimiques et les mécanismes sensoriels y répondant. L'haploïde de la levure Saccharomyces cerevisiae distingue son partenaire en interprétant le gradient de la concentration d'une phéromone sécrétée par les partenaires potentiels grâce à un réseau de protéines signalétiques de type kinase activées par la mitose (MAPK). La décision de la liaison sexuelle chez la levure est un événement en "tout–ourien", à la manière d'un interrupteur. Les cellules haploïdes choisissent leur partenaire sexuel en fonction de la concentration de phéromones qu’il produit. Seul le partenaire à proximité sécrétant des concentrations de phéromones égales ou supérieures à une concentration critique est retenu. Les faibles signaux de phéromones sont attribués à des partenaires pouvant mener à des accouplements infructueux. Notre compréhension du mécanisme moléculaire contrôlant cet interrupteur de la décision d'accouplement reste encore mince. Dans le cadre de la présente thèse, je démontre que le mécanisme de décision de la liaison sexuelle provient de la compétition pour le contrôle de l'état de phosphorylation de quatre sites sur la protéine d'échafaudage Ste5, entre la MAPK, Fus3, et la phosphatase,Ptc1. Cette compétition résulte en la dissociation de type « intérupteur » entre Fus3 et Ste5, nécessaire à la prise de décision d'accouplement en "tout-ou-rien". Ainsi, la décision de la liaison sexuelle s'effectue à une étape précoce de la voie de réponse aux phéromones et se produit rapidement, peut-être dans le but de prévenir la perte d’un partenaire potentiel. Nous argumentons que l'architecture du circuit Fus3-Ste5-Ptc1 génère un mécanisme inédit d'ultrasensibilité, ressemblant à "l'ultrasensibilité d'ordre zéro", qui résiste aux variations de concentration de ces protéines. Cette robustesse assure que l'accouplement puisse se produire en dépit de la stochasticité cellulaire ou de variations génétiques entre individus.Je démontre, par la suite, qu'un évènement précoce en réponse aux signaux extracellulaires recrutant Ste5 à la membrane plasmique est également ultrasensible à l'augmentation de la concentration de phéromones et que cette ultrasensibilité est engendrée par la déphosphorylation de huit phosphosites en N-terminal sur Ste5 par la phosphatase Ptc1 lorsqu'elle est associée à Ste5 via la protéine polarisante, Bem1. L'interférence dans ce mécanisme provoque une perte de l'ultrasensibilité et réduit, du même coup, l'amplitude et la fidélité de la voie de réponse aux phéromones à la stimulation. Ces changements se reflètent en une réduction de la fidélité et de la précision de la morphologie attribuable à la réponse d'accouplement. La polarisation dans l'assemblage du complexe protéique à la surface de la membrane plasmique est un thème général persistant dans tous les organismes, de la bactérie à l'humain. Un tel complexe est en mesure d'accroître l'efficacité, la fidélité et la spécificité de la transmission du signal. L'ensemble de nos découvertes démontre que l'ultrasensibilité, la précision et la robustesse de la réponse aux phéromones découlent de la régulation de la phosphorylation stoichiométrique de deux groupes de phosphosites sur Ste5, par la phosphatase Ptc1, un groupe effectuant le recrutement ultrasensible de Ste5 à la membrane et un autre incitant la dissociation et l'activation ultrasensible de la MAPK terminal Fus3. Le rôle modulateur de Ste5 dans la décision de la destinée cellulaire étend le répertoire fonctionnel des protéines d'échafaudage bien au-delà de l'accessoire dans la spécificité et l'efficacité des traitements de l'information. La régulation de la dynamique des caractères signal-réponse à travers une telle régulation modulaire des groupes de phosphosites sur des protéines d'échafaudage combinées à l'assemblage à la membrane peut être un moyen général par lequel la polarisation du destin cellulaire est obtenue. Des mécanismes similaires peuvent contrôler les décisions cellulaires dans les organismes complexes et peuvent être compromis dans des dérèglements cellulaires, tel que le cancer. Finalement, sur un thème relié, je présente la découverte d'un nouveau mécanisme où le seuil de la concentration de phéromones est contrôlé par une voie sensorielle de nutriments, ajustant, de cette manière, le point prédéterminé dans lequel la quantité et la qualité des nutriments accessibles dans l'environnement déterminent le seuil à partir duquel la levure s'accouple. La sous-unité régulatrice de la kinase à protéine A (PKA),Bcy1, une composante clé du réseau signalétique du senseur aux nutriments, interagit directement avec la sous-unité α des petites protéines G, Gpa1, le premier effecteur dans le réseau de réponse aux phéromones. L'interaction Bcy1-Gpa1 est accrue lorsque la cellule croit en présence d'un sucre idéal, le glucose, diminuant la concentration seuil auquel la décision d'accouplement est activée. Compromettre l'interaction Bcy1-Gpa1 ou inactiver Bcy1 accroît la concentration seuil nécessaire à une réponse aux phéromones. Nous argumentons qu'en ajustant leur sensibilité, les levures peuvent intégrer le stimulus provenant des phéromones au niveau du glucose extracellulaire, priorisant la décision de survie dans un milieu pauvre ou continuer leur cycle sexuel en choisissant un accouplement.

A data assimilation method for using low-resolution Earth observation data in heterogeneous ecosystems

We present an approach for dealing with coarse-resolution Earth observations (EO) in terrestrial ecosystem data assimilation schemes. The use of coarse-scale observations in ecological data assimilation schemes is complicated by spatial heterogeneity and nonlinear processes in natural ecosystems. If these complications are not appropriately dealt with, then the data assimilation will produce biased results. The “disaggregation” approach that we describe in this paper combines frequent coarse-resolution observations with temporally sparse fine-resolution measurements. We demonstrate the approach using a demonstration data set based on measurements of an Arctic ecosystem. In this example, normalized difference vegetation index observations are assimilated into a “zero-order” model of leaf area index and carbon uptake. The disaggregation approach conserves key ecosystem characteristics regardless of the observation resolution and estimates the carbon uptake to within 1% of the demonstration data set “truth.” Assimilating the same data in the normal manner, but without the disaggregation approach, results in carbon uptake being underestimated by 58% at an observation resolution of 250 m. The disaggregation method allows the combination of multiresolution EO and improves in spatial resolution if observations are located on a grid that shifts from one observation time to the next. Additionally, the approach is not tied to a particular data assimilation scheme, model, or EO product and can cope with complex observation distributions, as it makes no implicit assumptions of normality.

Boutet de Monvel`s calculus and groupoids I

Can Boutet de Monvel`s algebra on a compact manifold with boundary be obtained as the algebra Psi(0)(G) of pseudodifferential operators on some Lie groupoid G? If it could, the kernel G of the principal symbol homomorphism would be isomorphic to the groupoid C*-algebra C*(G). While the answer to the above question remains open, we exhibit in this paper a groupoid G such that C*(G) possesses an ideal I isomorphic to G. In fact, we prove first that G similar or equal to Psi circle times K with the C*-algebra Psi generated by the zero order pseudodifferential operators on the boundary and the algebra K of compact operators. As both Psi circle times K and I are extensions of C(S*Y) circle times K by K (S*Y is the co-sphere bundle over the boundary) we infer from a theorem by Voiculescu that both are isomorphic.

Caracterização térmica (TG/DTG, DTA, DSC, DSC-fotovisual) de Hormônios bioidênticos (estriol estradiol)

Bioidentical hormones are defined as compounds that have exactly the same chemical and molecular structure as hormones that are produced in the human body. It is believed that the use of hormones may be safer and more effective than the non-bioidentical hormones, because binding to receptors in the organism would be similar to the endogenous hormone. Bioidentical estrogens have been used in menopausal women, as an alternative to traditional hormone replacement therapy. Thermal data of these hormones are scarce in literature. Thermal analysis comprises a group of techniques that allows evaluating the physical-chemistry properties of a drug, while the drug is subjected to a controlled temperature programming. The thermal techniques are used in pharmaceutical studies for characterization of drugs, purity determination, polymorphism identification, compatibility and evaluation of stability. This study aims to characterize the bioidentical hormones estradiol and estriol through thermal techniques TG/DTG, DTA, DSC, DSC-photovisual. By the TG curves analysis was possible to calculated kinetic parameters for the samples. The kinetic data showed that there is good correlation in the different models used. For both estradiol and estriol, was found zero order reaction, which enabled the construction of the vapor pressure curves. Data from DTA and DSC curves of melting point and purity are the same of literature, showed relation with DSC-photovisual results. The analysis DTA curves showed the fusion event had the best linearity for both hormones. In the evaluation of possible degradation products, the analysis of the infrared shows no degradation products in the solid state

Estudo das interações polifenol-proteína e das reações de escurecimento não-enzimático para o processamento de cajuína

The cashew, a fruit from Brazilian Northeast is used to produce juice due to its flavor and vitamin C richness. However, its acceptance is limited due to its astringency. Cajuína is a derivate product appreciated by its characteristic flavor, freshness and lack of astringency, due to tannin removal. Cajuína is a light yellow beverage made from clarified cashew juice and sterilized after bottling. It differs from the integral and concentrated juice by the clarification and thermal treatment steps. Many problems such as haze and excessive browning could appear if these steps are not controlled. The objective of this work was divided into two stages with the aim to supply process information in order to obtain a good quality product with uniform characteristics (sensory and nutritional). Polyphenol-protein interaction was studied at the clarification step, which is an empirical process, to provide values on the amount of clarifying solution (gelatin) that must be added to achieve a complete juice clarification. Clarification essays were performed with juice dilutions of 1:2 and 1:10 and the effect of metabissulfite and tannic acid addition was evaluated. It was not possible to establish a clarification point. Metabissulfite did not influenced the clarification process however tannic acid addition displaced the clarification point, showing the difficulty visual monitoring of the process. Thermal treatment of clarified juice was studied at 88, 100, 111 e 121 °C. To evaluate the non-enzymatic browning, vitamin C, 5-hidroximetilfurfural (5-HMF) and sugar variation were correlated with color parameters (reflectance spectra, color difference and CIELAB). Kinetic models were obtained for reflectance spectra, ascorbic acid and 5-HMF. It was observed that 5-HMF introduction followed a first order kinetic rate at the beginning of the thermal treatment and a zero order kinetic at later process stages. An inverse correlation was observed between absorbance at 420 nm and ascorbic acid degradation, which indicates that ascorbic acid might be the principal factor on cajuína non-enzymatic browning. Constant sugar concentration showed that this parameter did not contribute directly to the nonenzymatic browning. Optimization techniques showed showed that to obtain a high vitamin C and a low 5-HMF content, the process must be done at 120 ºC. With the water-bath thermal treatment, the 90 °C temperature promoted a lower ascorbic acid degradation at the expense of a higher 5-HMF level

Comparative study of analytical methods by direct and first-derivative UV spectrophotometry for evaluation of losartan potassium in capsules

O losartano potássico é um agente anti-hipertensivo não peptídico, que exerce sua ação por bloqueio específico dos receptores da angiotensina II. Este trabalho propôs a validação e aplicação de métodos analíticos orientados ao controle de qualidade de losartano potássico 50 mg na forma farmacêutica cápsula, utilizando a espectrofotometria direta e derivada de primeira ordem na região do UV. Baseado nas características espectrofotométricas de losartano potássico, um sinal a 205 nm do espectro de ordem zero e um sinal a 234 nm do espectro de primeira derivada foram adequados para a quantificação. Os resultados foram usados para comparar essas duas técnicas instrumentais. O coeficiente de correlação entre as respostas e as concentrações de losartano potássico na faixa de 3,0-7,0 mg L-1 e 6,0-14,0 mg L-1 para espectrofotometria direta e derivada de primeira ordem em solução aquosa, respectivamente, foi de (r) of 0,9999 para ambos os casos. Os métodos foram aplicados para quantificação de losartano potássico em cápsulas obtidas de farmácias de manipulação locais e demonstraram ser eficientes, fáceis de aplicar e de baixo custo. Além disso, não necessitam de reagentes poluentes e requerem equipamentos economicamente viáveis.

Parameterized fast decoupled power flow methods for obtaining the maximum loading point of power systems. Part I. Mathematical modeling

The conventional Newton and fast decoupled power flow (FDPF) methods have been considered inadequate to obtain the maximum loading point of power systems due to ill-conditioning problems at and near this critical point. It is well known that the PV and Q-theta decoupling assumptions of the fast decoupled power flow formulation no longer hold in the vicinity of the critical point. Moreover, the Jacobian matrix of the Newton method becomes singular at this point. However, the maximum loading point can be efficiently computed through parameterization techniques of continuation methods. In this paper it is shown that by using either theta or V as a parameter, the new fast decoupled power flow versions (XB and BX) become adequate for the computation of the maximum loading point only with a few small modifications. The possible use of reactive power injection in a selected PV bus (Q(PV)) as continuation parameter (mu) for the computation of the maximum loading point is also shown. A trivial secant predictor, the modified zero-order polynomial which uses the current solution and a fixed increment in the parameter (V, theta, or mu) as an estimate for the next solution, is used in predictor step. These new versions are compared to each other with the purpose of pointing out their features, as well as the influence of reactive power and transformer tap limits. The results obtained with the new approach for the IEEE test systems (14, 30, 57 and 118 buses) are presented and discussed in the companion paper. The results show that the characteristics of the conventional method are enhanced and the region of convergence around the singular solution is enlarged. In addition, it is shown that parameters can be switched during the tracing process in order to efficiently determine all the PV curve points with few iterations. (C) 2003 Elsevier B.V. All rights reserved.

Parameterized fast decoupled power flow methods for obtaining the maximum loading point of power systems. Part II. Performance evaluation

The parameterized fast decoupled power flow (PFDPF), versions XB and BX, using either theta or V as a parameter have been proposed by the authors in Part I of this paper. The use of reactive power injection of a selected PVbus (Q(PV)) as the continuation parameter for the computation of the maximum loading point (MLP) was also investigated. In this paper, the proposed versions obtained only with small modifications of the conventional one are used for the computation of the MLP of IEEE test systems (14, 30, 57 and 118 buses). These new versions are compared to each other with the purpose of pointing out their features, as well as the influence of reactive power and transformer tap limits. The results obtained with the new approaches are presented and discussed. The results show that the characteristics of the conventional FDPF method are enhanced and the region of convergence around the singular solution is enlarged. In addition, it is shown that these versions can be switched during the tracing process in order to efficiently determine all the PV curve points with few iterations. A trivial secant predictor, the modified zero-order polynomial, which uses the current solution and a fixed increment in the parameter (V, theta, or mu) as an estimate for the next solution, is used for the predictor step. (C) 2003 Elsevier B.V. All rights reserved.

Clavulanic acid production processes in a tower bioreactor with immobilised cells

The feasibility of using Streptomyces clavuligerus ATCC 27064 bioparticles supported on alginate gel containing alumina to produce clavulanic acid (CA) was investigated. To this end, effectiveness factors for spherical bioparticles, relating respiration rates of immobilised and free cells, were experimentally determined for various dissolved oxygen (DO) levels and bioparticle radii. Monod kinetics was assumed as representative of the oxygen consuming reaction, while internal oxygen diffusion was considered the limiting step. A comparison was made of the results from a tower bioreactor operating under batch, repeated-batch and continuous conditions with immobilised bioparticles. The theoretical curve of the effectiveness factor for the zero-order reaction model, considering an inert nucleus - the dead core model - was very well fitted to the experimental data. The results of the bioprocess indicated that the batch operation was the most efficient and productive, requiring a do concentration in the reactor above 60% of the saturation value. (C) 2007 Elsevier B.V. All rights reserved.

Precipitation reaction in alpha-Cu-Al-Ag alloys

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ag-rich phase formation in the Cu-6 wt% Al alloy with Ag additions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produtos de acerola: estudo da estabilidade de vitamina C

A acerola é um fruto altamente perecível e que contém altos teores de vitamina C, sendo este o seu principal atrativo em termos nutricionais. A atual legislação brasileira prevê uma variação de, no máximo, 20% do teor dos nutrientes especificados no rótulo. Devido a essa exigência seria importante que os fabricantes considerassem tanto o teor inicial de vitamina C quanto a perda ao longo da armazenagem dos produtos de acerola. Neste trabalho, foi feito o acompanhamento da estabilidade da vitamina C em polpa pasteurizada e acerola in natura congeladas, ambas armazenadas a -12ºC e -18ºC, e em suco de acerola pasteurizado engarrafado, mantido a temperatura ambiente, ao longo de 4 meses de armazenagem. As polpas congeladas não apresentaram degradação significativa durante este período, já as in natura apresentaram cinética de degradação de 1ª ordem e o suco de ordem zero. Após 4 meses de armazenagem as acerolas armazenadas a -12ºC e -18ºC apresentaram teores de 869±12 e 1.223±148 mg vit.C/100g, representando uma perda de 43% e 19%, respectivamente, em relação ao teor inicial. Polpas a -12ºC e -18ºC apresentaram teores de 1.314±6 e 1.322±2 mg vit.C/100g, respectivamente, representando uma perda de, aproximadamente, 3% e o suco apresentou uma perda de 32%, correspondendo a um teor final de 673±17mg vit.C/100g.

Electrochemical oxidation of an acid dye by active chlorine generated using Ti/Sn(1-x)Ir O-x(2) electrodes

The generation of active chlorine on Ti/Sn(1-x)Ir (x) O-2 anodes, with different compositions of Ir (x = 0.01, 0.05, 0.10 and 0.30 ), was investigated by controlled current density electrolysis. Using a low concentration of chloride ions (0.05 mol L-1) and a low current density (5 mA cm(-2)) it was possible to produce up to 60 mg L-1 of active chlorine on a Ti/Sn0.99Ir0.01O2 anode. The feasibility of the discoloration of a textile acid azo dye, acid red 29 dye (C.I. 16570), was also investigated with in situ electrogenerated active chlorine on Ti/Sn(1-x)Ir (x) O-2 anodes. The best conditions for 100% discoloration and maximum degradation (70% TOC reduction) were found to be: NaCl pH 4, 25 mA cm(-2) and 6 h of electrolysis. It is suggested that active chlorine generation and/or powerful oxidants such as chlorine radicals and hydroxyl radicals are responsible for promoting faster dye degradation. Rate constants calculated from color decay versus time reveal a zero order reaction at dye concentrations up to 1.0 x 10(-4) mol L-1. Effects of other electrolytes, dye concentration and applied density currents also have been investigated and are discussed.