The Cup Anemometer, a Fundamental Meteorological Instrument for the Wind Energy Industry. Research at the IDR/UPM Institute

The results of several research campaigns investigating cup anemometer performance carried out since 2008 at the IDR/UPM Institute are included in the present paper. Several analysis of large series of calibrations were done by studying the effect of the rotor’s geometry, climatic conditions during calibration, and anemometers’ ageing. More specific testing campaigns were done regarding the cup anemometer rotor aerodynamics, and the anemometer signals. The effect of the rotor’s geometry on the cup anemometer transfer function has been investigated experimentally and analytically. The analysis of the anemometer’s output signal as a way of monitoring the anemometer status is revealed as a promising procedure for detecting anomalies.

Construción de una herramienta para la gestión de las prácticas externas en la ETSI Informáticos de la UPM

La ETSI Informáticos de la UPM ofrece un sistema de prácticas externas como parte de los créditos de optatividad de algunas de las titulaciones que se imparten. El COLFI (Centro de Orientación Laboral de la Facultad de Informática), se encarga de gestionar este sistema de prácticas externas,almacenando y manejando datos de las mismas a través de hojas de cálculo. El centro debe establecer un convenio con la empresa que acogería al alumno, además, a cada alumno le son asignados dos tutores, un docente de la Escuela como tutor interno y un trabajador de la empresa como tutor externo. Los datos de los tutores, las empresas y los alumnos se almacenan para la posterior consulta, elaboración de informes que recogen distintas estadísticas y generación de certificados a los tutores que los soliciten. Todos estos datos son almacenados mediante hojas de cálculo y la generación de certificados e informes son realizadas actualmente a mano. Por ello, en este proyecto, se propone dotar al Centro de Orientación Laboral de una herramienta que permita realizar todas estas tareas de forma rápida, cómoda e incluso automática, facilitando el acceso y el almacenamiento de los datos.

El sueño de la razón. Unidad Docente Campo Baeza ETSAM-UPM. Curso Académico 2013-2014

El sueño de la razón. Unidad Docente Campo Baeza ETSAM-UPM. Curso Académico 2013-2014

Evolution and implementation of CDIO initiatives at ETSII-UPM

The School of Industrial Engineering at Universidad Politécnica de Madrid (ETSII-UPM) has been promoting student-centred teaching-learning activities, according to the aims of the Bologna Declaration, well before the official establishment of the European Area of Higher Education. Such student-centred teaching-learning experiences led us to the conviction that project based learning is rewarding, both for students and academics, and should be additionally promoted in our new engineering programmes, adapted to the Grade-Master structure. The level of commitment of our teachers with these activities is noteworthy, as the teaching innovation experiences carried out in the last ten years have led to the foundation of 17 Teaching Innovation Groups at ETSII-UPM, hence leading the ranking of teaching innovation among all UPM centres. Among interesting CDIO activities our students have taken part in especially complex projects, including the Formula Student, linked to the complete development of a competition car, and the Cybertech competition, aimed at the design, construction and operation of robots for different purposes. Additional project-based learning teamwork activities have been linked to toy design, to the development of medical devices, to the implementation of virtual laboratories, to the design of complete industrial installations and factories, among other activities detailed in present study. The implementation of Bologna process will culminate at ETSII-UPM with the beginning of the Master’s Degree in Industrial Engineering, in academic year 2014-15. The program has been successfully approved by the Spanish Agency for Accreditation (ANECA), with the inclusion of a set of subjects based upon the CDIO methodology denominated generally “INGENIA”, linked to the Spanish “ingeniar” (to provide ingenious solutions), also related etymologically in Spanish with “ingeniero”, engineer. INGENIA students will live through the complete development process of a complex product or system and there will be different kind of projects covering most of the engineering majors at ETSII-UPM.

The chair of food Banks UPM as a tool of raising awareness and promoting a culture of rational food comsumption

The Chair of Food Banks UPM arises from a cooperation agreement between the Spanish Federation of Food Banks (FESBAL) and the Technical University of Madrid (UPM), with the aim of raising awareness and promoting rational food consumption to avoid food waste, through activities of training, transfer of knowledge and promotion of I+D+i. The aim of this paper is to reflect on the activities carried out during the first year in order to obtain learning lessons and improve the management of activities and resources.

GTH-UPM system for search on speech evaluation

This paper describes the GTH-UPM system for the Albayzin 2014 Search on Speech Evaluation. Teh evaluation task consists of searching a list of terms/queries in audio files. The GTH-UPM system we are presenting is based on a LVCSR (Large Vocabulary Continuous Speech Recognition) system. We have used MAVIR corpus and the Spanish partition of the EPPS (European Parliament Plenary Sessions) database for training both acoustic and language models. The main effort has been focused on lexicon preparation and text selection for the language model construction. The system makes use of different lexicon and language models depending on the task that is performed. For the best configuration of the system on the development set, we have obtained a FOM of 75.27 for the deyword spotting task.

Determinación de la amplificación sísmica local en el Campus Sur UPM mediante la técnica de sismología de microtremores ReMi.

En el Campus Sur de la Universidad Politécnica de Madrid se ha llevado a cabo un proyecto para obtener una caracterización del subsuelo mediante ensayos ReMi, en colaboración con el departamento de Geofísica del Instituto Geográfico Nacional. La técnica ReMi (Refraction Microtremor) permite, mediante ensayos geofísicos realizados localmente sobre el terreno,obtener los parámetros físicos del mismo, que resultan de especial interés en el ámbito de la ingeniería civil. Esta técnica se caracteriza por englobarse dentro de la sísmica pasiva, muy empleada en prospección geofísica y basada en la obtención del modelo subyacente de distribución de velocidades de propagación de la onda S en función de la profundidad, con la ventaja de aprovechar el ruido sísmico ambiental como fuente de energía. Fue desarrollada en el Laboratorio Sismológico de Nevada (EEUU) por Louie (2001), con el objetivo de presentar una técnica innovadora en la obtención de las velocidades de propagación de manera experimental. Presenta ciertas ventajas, como la observación directa de la dispersión de ondas superficiales,que da un buen resultado de la velocidad de onda S, siendo un método no invasivo, de bajo coste y buena resolución, aplicable en entornos urbanos o sensibles en los que tanto otras técnicas sismológicas como otras variedades de prospección presentan dificultades. La velocidad de propagación de la onda S en los 30 primeros metros VS30, es ampliamente reconocida como un parámetro equivalente válido para caracterizar geotécnicamente el subsuelo y se halla matemáticamente relacionada con la velocidad de propagación de las ondas superficiales a observar mediante la técnica ReMi. Su observación permite el análisis espectral de los registros adquiridos, obteniéndose un modelo representado por la curva de dispersión de cada emplazamiento, de modo que mediante una inversión se obtiene el modelo de velocidad de propagación en función de la profundidad. A través de estos modelos, pueden obtenerse otros parámetros de interés sismológico. Estos resultados se representan sobre mapas isométricos para obtener una relación espacial de los mismos, particularmente conocido como zonación sísmica. De este análisis se extrae que la VS30 promedio del Campus no es baja en exceso, correspondiéndose a posteriori con los resultados de amplificación sísmica, período fundamental de resonancia del lugar y profundidad del sustrato rocoso. En última instancia se comprueba que los valores de amplificación sísmica máxima y el período al cual se produce posiblemente coincidan con los períodos fundamentales de resonancia de algunos edificios del Campus. ABSTRACT In South Campus at Polytechnic University of Madrid, a project has been carried out to obtain a proper subsoil description by applying ReMi tests, in collaboration with the Department of Geophysics of the National Geographic Institute. Through geophysical tests conducted locally, the ReMi (Refraction Microtremor) technique allows to establish the physical parameters of soil, which are of special interest in the field of civil engineering. This technique is part of passive seismic methods, often used in geophysical prospecting. It focuses in obtaining the underlying model of propagation velocity distribution of the shear wave according to depth and has the advantage of being able to use seismic ambient noise as a source of energy. It was developed in the Nevada Seismological Laboratory (USA) by Louie (2001) as an innovative technique for obtaining propagation velocities experimentally. It has several other advantages, including the direct observation of the dispersion of surface waves, which allows to reliably measure S wave velocity. This is a non-invasive, low cost and good resolution method, which can be applied in urban or sensitive environments where other prospection methods present difficulties. The propagation velocity of shear waves in the first 30 meters Vs30 is widely recognized as a valid equivalent parameter to geotechnically characterize the subsurface. It is mathematically related to surface wave's velocity of propagation, which are to observe using REMI technique. Spectral analysis of acquired data sets up a model represented by the dispersion curve at each site, so that, using an inversion process, propagation velocity model in relation to depth is obtained. Through this models, other seismologically interesting parameters can be obtained. These results are represented on isometric maps in order to obtain a spatial relationship between them, a process which is known as seismic zonation. This analysis infers that Vs30 at South Campus is not alarmingly low , corresponding with subsequent results of seismic amplification, fundamental period of resonance of soil and depth of bedrock. Ultimately, it's found that calculated values of soil's fundamental periods at which maximum seismic amplification occurs, may possibly match fundamental periods of some Campus buildings.

Estudio de patrones de interacción entre los estudiantes y la Plataforma de Tele-Enseñanza en la UPM

Vivimos en una sociedad en la que la información ha adquirido una vital importancia. El uso de Internet y el desarrollo de nuevos sistemas de la información han generado un ferviente interés tanto de empresas como de instituciones en la búsqueda de nuevos patrones que les proporcione la clave del éxito. La Analítica de Negocio reúne un conjunto de herramientas, estrategias y técnicas orientadas a la explotación de la información con el objetivo de crear conocimiento útil dentro de un marco de trabajo y facilitar la optimización de los recursos tanto de empresas como de instituciones. El presente proyecto se enmarca en lo que se conoce como Gestión Educativa. Se aplicará una arquitectura y modelo de trabajo similar a lo que se ha venido haciendo en los últimos años en el entorno empresarial con la Inteligencia de Negocio. Con esta variante, se pretende mejorar la calidad de la enseñanza, agilizar las decisiones dentro de la institución académica, fortalecer las capacidades del cuerpo docente y en definitiva favorecer el aprendizaje del alumnado. Para lograr el objetivo se ha decidido seguir las etapas del Knowledge Discovery in Databases (KDD), una de las metodologías más conocidas dentro de la Inteligencia de Negocio, que describe el procedimiento que va desde la selección de la información y su carga en sistemas de almacenamiento, hasta la aplicación de técnicas de minería de datos para la obtención nuevo conocimiento. Los estudios se realizan a partir de la información de la activad de los usuarios dentro la plataforma de Tele-Enseñanza de la Universidad Politécnica de Madrid (Moodle). Se desarrollan trabajos de extracción y preprocesado de la base de datos en crudo y se aplican técnicas de minería de datos. En la aplicación de técnicas de minería de datos, uno de los factores más importantes a tener en cuenta es el tipo de información que se va a tratar. Por este motivo, se trabaja con la Minería de Datos Educativa, en inglés, Educational Data Mining (EDM) que consiste en la aplicación de técnicas de minería optimizadas para la información que se genera en entornos educativos. Dentro de las posibilidades que ofrece el EDM, se ha decidido centrar los estudios en lo que se conoce como analítica predictiva. El objetivo fundamental es conocer la influencia que tienen las interacciones alumno-plataforma en las calificaciones finales y descubrir nuevas reglas que describan comportamientos que faciliten al profesorado discriminar si un estudiante va a aprobar o suspender la asignatura, de tal forma que se puedan tomar medidas que mejoren su rendimiento. Toda la información tratada en el presente proyecto ha sido previamente anonimizada para evitar cualquier tipo de intromisión que atente contra la privacidad de los elementos participantes en el estudio. ABSTRACT. We live in a society dominated by data. The use of the Internet accompanied by developments in information systems has generated a sustained interest among companies and institutions to discover new patterns to succeed in their business ventures. Business Analytics (BA) combines tools, strategies and techniques focused on exploiting the available information, to optimize resources and create useful insight. The current project is framed under Educational Management. A Business Intelligence (BI) architecture and business models taught up to date will be applied with the aim to accelerate the decision-making in academic institutions, strengthen teacher´s skills and ultimately improve the quality of teaching and learning. The best way to achieve this is to follow the Knowledge Discovery in Databases (KDD), one of the best-known methodologies in B.I. This process describes data preparation, selection, and cleansing through to the application of purely Data Mining Techniques in order to incorporate prior knowledge on data sets and interpret accurate solutions from the observed results. The studies will be performed using the information extracted from the Universidad Politécnica de Madrid Learning Management System (LMS), Moodle. The stored data is based on the user-platform interaction. The raw data will be extracted and pre-processed and afterwards, Data Mining Techniques will be applied. One of the crucial factors in the application of Data Mining Techniques is the kind of information that will be processed. For this reason, a new Data Mining perspective will be taken, called Educational Data Mining (EDM). EDM consists of the application of Data Mining Techniques but optimized for the raw data generated by the educational environment. Within EDM, we have decided to drive our research on what is called Predictive Analysis. The main purpose is to understand the influence of the user-platform interactions in the final grades of students and discover new patterns that explain their behaviours. This could allow teachers to intervene ahead of a student passing or failing, in such a way an action could be taken to improve the student performance. All the information processed has been previously anonymized to avoid the invasion of privacy.

IDR/UPM facilities for liquid bridge experimentation on earth under microgravity conditions

Besides space laboratories for in-orbit experimentation, Earth based facilities for laboratory experimentation are of paramount importance for the enhancement on liquid bridge knowledge. In spite of the constraints imposed by simulated microgravity (which force to work either with very small size liquid bridges or by using the Plateau tank technique, amongst other techniques), the availability and accessibility of Earth facilities can circumvent in many cases the drawbacks associated with simulated microgravity conditions. To support theoretical and in orbit experimental studies on liquid bridges under reduced gravity conditions, several ground facilities were developed at IDR. In the following these ground facilities are briefly described, and main results obtained by using them are cited.

Del puzzle a la unidad: la UPM y Rafael Portaencasa

En estas palabras, escritas por José Antonio Martín Pereda, e incluidas en una sesión de homenaje al difunto D. Rafael Portaencasa celebrada por la Real Academia de Ingeniería, el autor recuerda cómo era Portaencasa, en qué situación encontró la Universidad Politécnica de Madrid cuando empezó su mandato como Rector y cuáles fueron sus mayores logros.

Evaluation of Ohmic Instrument Company model UPM-30 ultrasound power meter /

Mode of access: Internet.

Direct support and general support maintenance repair parts and special tools lists (including depot maintenance repair parts and special tools) : spectrum analyzer AN/UPM-58, FSN 6625-523-8576.

September 1973."

Organizational, direct support, and general support maintenance repair parts and special tools lists for test sets, electrical power AN/UPM-93C (NSN 6625-00-971-6210), AN/UPM-93A, AN/UPM-93B, and AN/UPM-93D.

"January 1978."

Organizational maintenance repair parts and special tools lists : spectrum analyzer AN/UPM-58, FSN 6625-523-8576.

28 September 1973."

Field (fourth echelon) and depot maintenance repair parts and special tool lists : radar, test set AN/UPM-98.

Chiefly tables.