Journalisation dans un Programme de carrière en nouveaux médias : Le rôle de la réflexion par l’action

The purpose of this case study is to report on the use of learning journals as a strategy to encourage critical reflection in the field of graphic design. Very little empirical research has been published regarding the use of critical reflection in learning journals in this field. Furthermore, nothing has been documented at the college level. To that end, the goal of this research endeavor was to investigate whether second-year students in the NewMedia and Publication Design Program at a small Anglophone CEGEP in Québec, enrolled in a Page Layout and Design course, learn more deeply by reflecting in action during design projects or reflecting on action after completing design projects. Secondarily, indications of a possible change in self-efficacy were examined. Two hypotheses were posited: 1) reflection-on-action journaling will promote a deeper approach to learning than reflection-in-action journaling, and 2) the level of self-efficacy in graphic design improves as students are encouraged to think reflectively. Using both qualitative and quantitative methods, a mixed methods approach was used to collect and analyze the data. Content analysis of journal entries and interview responses was the primary method used to address the first hypothesis. Students were required to journal twice for each of three projects, once during the project and again one week after the project had been submitted. In addition, data regarding the students' perception of journaling was obtained through administering a survey and conducting interviews. For the second hypothesis, quantitative methods were used through the use of two surveys, one administered early in the Fall 2011 semester and the second administered early in the Winter 2012 semester. Supplementary data regarding self-efficacy was obtained in the form of content analysis of journal entries and interviews. Coded journal entries firmly supported the hypothesis that reflection-on-action journaling promotes deep learning. Using a taxonomy developed by Kember et al. (1999) wherein "critical reflection" is considered the highest level of reflection, it was found that only 5% of the coded responses in the reflection-in-action journals were deemed of the highest level, whereas 39% were considered critical reflection in the reflection-on-action journals. The findings from the interviews suggest that students had some initial concerns about the value of journaling, but these concerns were later dismissed as students learned that journaling was a valuable tool that helped them reflect and learn. All participants indicated that journaling changed their learning processes as they thought much more about what they were doing while they were doing it. They were taking the learning they had acquired and thinking about how they would apply it to new projects; this is critical reflection. The survey findings did not support the conclusive results of the comparison of journal instruments, where an increase of 35% in critical reflection was noted in the reflection-on-action journals. In Chapter 5, reasons for this incongruence are explored. Furthermore, based on the journals, surveys, and interviews, there is not enough evidence at this time to support the hypothesis that self-efficacy improves when students are encouraged to think reflectively. It could be hypothesized, however, that one's self-efficacy does not change in such a short period of time. In conclusion, the findings established in this case study make a practical contribution to the literature concerning the promotion of deep learning in the field of graphic design, as this researcher's hypothesis was supported that reflection-on-action journaling promoted deeper learning than reflection-in-action journaling. When examining the increases in critical reflection from reflection-in-action to the reflection-on-action journals, it was found that all students but one showed an increase in critical reflection in reflection-on-action journals. It is therefore recommended that production-oriented program instructors consider integrating reflection-on-action journaling into their courses where projects are given.

Gouvernance et gestion des espaces hydrographiques nationaux et internationaux: I’analyse du cas espagnol et des conflits de l’eau dans le bassin de l’Ebre

"Il existe trois scénarios d’insécurité environnementale en Colombie dans lesquels la relation entre l’état des ressources naturelles en eau, pétrole et biodiversité (pénurie, dégradation, surexploitation, risque d’appropriation et terrorisme écologique) et la situation des rapports de force internes et régionaux (exacerbation des tensions interétatiques, sociétales et insécurité humaine) est évidente. Ce résultat a été démontré lors d’un projet de recherche antérieur (2002-2005) menée par l’auteur de ce document de recherche dans le cadre de la ligne de recherche en sécurité régionale et internationale du Centre d’Etudes Politiques et Internationales -CEPI- des Facultés de Science Politique et Gouvernements et de Relations Internationales de l’Université du Rosario de Bogota..."

A importância das revistas Química Nova e Journal of the Brazilian Chemical Society no crescimento da área de química no Brasil

Quimica Nova and the Journal of the Brazilian Chemical Society are two examples of successful initiatives taken by the Brazilian Chemical Society (SBQ - Sociedade Brasileira de Química), and may serve as models for the scientific societies of developing countries. Pillars of the SBQ, these two periodicals are undeniable demonstrations that idealism, utopia and dignity are the essential ingredients for transforming dreams into reality. Few believed that the Brazilian chemical community would one day have, as it does today, two scientific research periodicals indexed in the principal international data banks.

Atividades fisicas e estados emocionais : relatos verbais sobre estados emocionais como indicadores dos efeitos de um programa de atividades fisicas para adultos

Universidade Estadual de Campinas. Faculdade de Educação Física

Influence of intraradicular post and crown ferrule on the fracture strength of endodontically treated teeth

The aim of this study was to investigate the fracture strength of endodontically treated teeth restored with different posts and variable ferrule heights. Sixty freshly extracted human canines were treated endodontically and randomly assigned to 6 groups (n=10), being restored with custom-made cast post-and-core (CP0 and CP3 groups), prefabricated post and composite resin core (PF0 and PF3 groups), and composite resin (CR0 and CR3 groups). The CP0, PF0 and CR0 groups presented no ferrule and the CP3, PF3 and CR3 presented 3 mm of coronal structure. All teeth were restored with full metal crowns. The fracture strength was measured in a universal testing machine at 45o to the long axis of the tooth until failure. Data were analyzed statistically by 2-way ANOVA and Tukey's test (?=0.05). When the mean fracture strength values were compared (CP0 group - 820.20 N, CP3 group - 1179.12 N; PF0 group - 561.05 N; PF3 group - 906.79 N; CR0 group - 297.84 N; and CR3 group - 1135.15 N) there was statistically significant among the groups (p<0.05), except for the three groups with 3 mm of coronal remaining, which were similar to each other. The results of this study showed that the ferrule in crowns promoted significantly higher fracture strength in the endodontically treated teeth.

Fracture resistance of weakened roots restored with composite resin and glass fiber post

This study evaluated the fracture resistance of weakened roots restored with glass fiber posts, composite resin cores and complete metal crowns. Thirty maxillary canines were randomly divided into 3 groups of 10 teeth each: teeth without weakened roots (control); teeth with partially weakened roots (PWR) and teeth with and largely weakened roots (LWR). The control group was restored with glass fiber posts and a composite resin core. Teeth in the PWR and LWR groups were flared internally to standardized dimensions in order to simulate root weakness. Thereafter, the roots were partially filled with composite resin and restored in the same way as in the control group. The specimens were exposed to 250,000 cycles in a controlled chewing simulator. All intact specimens were subjected to a static load (N) in a universal testing machine at 45 degrees to the long axis of the tooth until failure. Data were analyzed by one-way ANOVA and Dunnett's test for multiple comparisons (p=0.05). There were statistically significant difference differences (p<0.01) among the groups (control group = 566.73 N; PWR = 409.64 N; and LWR = 410.91 N), with significantly higher fracture strength for the control group. There was no statistically significant difference (p>0.05) between the weakened groups. The results of this study showed that thicker root dentin walls significantly increase the fracture resistance of endodontically treated teeth.

Orthodontic-surgical treatment of class III malocclusion with mandibular asymmetry

Class III skeletal malocclusion may present several etiologies, among which maxillary deficiency is the most frequent. Bone discrepancy may have an unfavorable impact on esthetics, which is frequently aggravated by the presence of accentuated facial asymmetries. This type of malocclusion is usually treated with association of Orthodontics and orthognathic surgery for correction of occlusion and facial esthetics. This report presents the treatment of a patient aged 15 years and 1 month with Class III skeletal malocclusion, having narrow maxilla, posterior open bite on the left side, anterior crossbite and unilateral posterior crossbite, accentuated negative dentoalveolar discrepancy in the maxillary arch, and maxillary and mandibular midline shift. Clinical examination also revealed maxillary hypoplasia, increased lower one third of the face, concave bone and facial profiles and facial asymmetry with mandibular deviation to the left side. The treatment was performed in three phases: presurgical orthodontic preparation, orthognathic surgery and orthodontic finishing. In reviewing the patient's final records, the major goals set at the beginning of treatment were successfully achieved, providing the patient with adequate masticatory function and pleasant facial esthetics.

Bonding agent underneath sealant: shear bond strength to oil-contaminated

This study evaluated in vitro the shear bond strength of a resin-based pit-and-fissure sealant (Fluroshield - F) associated with either an ethanol-based (Adper Single Bond 2 - SB) or an acetone-based (Prime & Bond - PB) adhesive system under conditions of oil contamination. Mesial and distal enamel surfaces from 30 sound third molars were randomly assigned to 2 groups (n=30): I - no oil contamination; II - oil contamination. Contamination (0.25 mL during 10 s) was performed after 37% phosphoric acid etching with an air/oil spray. The specimens were randomly assigned to subgroups, according to the bonding protocol adopted: subgroup A - F was applied to enamel without an intermediate bonding agent layer; In subgroups B and C, SB and PB, respectively, were applied, light-cured, and then F was applied and light-cured. Shear bond strength was tested at a crosshead speed of 0.5 mm/min in a universal testing machine. Means (± SD) in MPa were: IA-11.28 (±1.84); IIA-12.02 (±1.15); IB-9.73 (±2.38); IIB-9.62 (±2.29); IC-28.30 (±1.63); and IIC-25.50 (±1.91). It may be concluded that the oil contamination affected negatively the sealant bonding to enamel and the acetone-based adhesive system (PB) layer applied underneath the sealant was able to prevent its deleterious effects to adhesion.

Bond strength of a pit-and-fissure sealant associated to etch-and-rinse and self-etching adhesive systems to saliva-contaminated enamel: individual vs. simultaneous light curing

This study evaluated in vitro the shear bond strength (SBS) of a resin-based pit-and-fissure sealant [Fluroshield (F), Dentsply/Caulk] associated with either an etch-and-rinse [Adper Single Bond 2 (SB), 3M/ESPE] or a self-etching adhesive system [Clearfil S3 Bond (S3), Kuraray Co., Ltd.] to saliva-contaminated enamel, comparing two curing protocols: individual light curing of the adhesive system and the sealant or simultaneous curing of both materials. Mesial and distal enamel surfaces from 45 sound third molars were randomly assigned to 6 groups (n=15), according to the bonding technique: I - F was applied to 37% phosphoric acid etched enamel. The other groups were contaminated with fresh human saliva (0.01 mL; 10 s) after acid etching: II - SB and F were light cured separately; III - SB and F were light cured together; IV - S3 and F were light cured separately; V - S3 and F were light cured simultaneously; VI - F was applied to saliva-contaminated, acid-etched enamel without an intermediate bonding agent layer. SBS was tested to failure in a universal testing machine at 0.5 mm/min. Data were analyzed by one-way ANOVA and Fisher's test (α=0.05).The debonded specimens were examined with a stereomicroscope to assess the failure modes. Three representative specimens from each group were observed under scanning electron microscopy for a qualitative analysis. Mean SBS in MPa were: I-12.28 (±4.29); II-8.57 (±3.19); III-7.97 (±2.16); IV-12.56 (±3.11); V-11.45 (±3.77); and VI-7.47 (±1.99). In conclusion, individual or simultaneous curing of the intermediate bonding agent layer and the resin sealant did not seem to affect bond strength to saliva-contaminated enamel. S3/F presented significantly higher SBS than the that of the groups treated with SB etch-and-rinse adhesive system and similar SBS to that of the control group, in which the sealant was applied under ideal dry, noncontaminated conditions.

Association between osteoporosis and rheumatoid arthritis in women: a cross-sectional study

CONTEXT AND OBJECTIVES: Osteoporosis has frequently been observed in patients with rheumatoid arthritis. The present study was undertaken in order to evaluate factors associated with osteoporosis among women with rheumatoid arthritis. DESIGN AND SETTING: Cross-sectional study, carried out in a public hospital in São Paulo. METHODS: The participants were 83 women with rheumatoid arthritis (53.7 ± 10.0 years old). Bone mineral density (BMD) and body composition were measured by dual energy X-ray absorptiometry. The patients were divided into three groups according to BMD: group 1, normal BMD (n = 24); group 2, osteopenia (n = 38); and group 3, osteoporosis (n = 21). Tests were performed to compare differences in means and correlations, with adjustments for age, duration of disease and cumulative corticosteroid. The relationships between clinical factors, physical activity score, dietary intake, body composition and biochemical parameters were analyzed using linear regression models. RESULTS: Mean calcium, vitamin D and omega-6 intakes were lower than the recommendations. Associations were found between BMD and age, disease duration, parathyroid hormone concentration and fat intake. The linear regression model showed that being older, with more years of disease and lower weight were negatively correlated with BMD [Total femur = 0.552 + 0.06 (weight) + 0.019 (total physical activity) - 0.05 (age) - 0.003 (disease duration); R² = 48.1; P < 0.001]. CONCLUSION: The present study indicates that nutritional factors and body composition are associated with bone mass in women with rheumatoid arthritis.

Determinação espectrofotométrica do bromidrato de fenoterol em preparações farmacêuticas

Um método espectrofotométrico simples foi desenvolvido para a determinação do bromidrato de fenoterol (BF) em comprimidos, gotas e xarope, como princípio ativo único e associado ao ibuprofeno. O método se baseia na reação de acoplamento oxidativo do BF com o 3-metil-2-benzotiazolinona hidrazona (MBTH), na presença de sulfato cérico, como agente oxidante. A mistura de BF, MBTH e sulfato cérico, em meio ácido, produz um composto colorido (vermelho castanho) com máximo de absorção a 475 nm. A curva de calibração foi linear num intervalo de concentração de 3,0 a 12,0 µg/mL, com coeficiente de correlação linear de 0,9998. Os parâmetros experimentais que afetam o desenvolvimento e a estabilidade do produto colorido foram cuidadosamente estudados e otimizados. O método foi aplicado em amostras comerciais e simuladas, obtendo-se coeficientes de variação entre 0,25 % a 0,82 % e médias de recuperação do padrão que variaram de 98 % a 102 %. O método proposto mostrou-se exato, preciso, linear e não é passível de interferência de excipientes, para as formas farmacêuticas comprimidos e gotas. Não houve interferência do ibuprofeno que consta de uma das formulações analisadas, associado ao BF. Quanto ao xarope, houve interferência do veículo sugerindo reações de seus componentes com o MBTH.

Utilização de técnicas estatísticas em duas revistas de fruticultura

Neste trabalho são descritas as técnicas de análise estatística utilizadas e a acessibilidade estatística em uma amostra dos artigos originais publicados no período 1996-2006 em duas revistas de pesquisa na área de fruticultura: a Revista Brasileira de Fruticultura (RBF) e a revista francesa Fruits. No total foram classificados 986 artigos em 16 categorias de análise estatística, ordenadas em grau ascendente de complexidade. No período analisado, foi constatado um aumento no uso de análises mais sofisticadas ao longo do tempo em ambos as revistas. Os trabalhos publicados pela RBF aplicaram com maior freqüência técnicas estatísticas mais complexas, com maior utilização de delineamentos em blocos aleatorizados, arranjos fatoriais, parcelas subdivididas e modelos hierárquicos, e do teste de Tukey para comparações múltiplas de médias. Nos trabalhos publicados pela revista Fruits, predominou o uso de outros testes paramétricos e do teste de Duncan. O pacote estatístico SAS foi o mais utilizado nos artigos publicados em ambas as revistas. Os leitores da revista RBF precisaram de um nível de conhecimento estatístico mais elevado para ter acesso à maior parte dos artigos publicados no período, em comparação com os leitores da revista francesa.

Aspectos dietéticos das refeições oferecidas por empresas participantes do Programa de Alimentação do Trabalhador na Cidade de São Paulo, Brasil

Resumo: OBJETIVO: Avaliar os aspectos dietéticos das refeições oferecidas por empresas inscritas no Programa de Alimentação do Trabalhador (PAT) na Cidade de São Paulo, Brasil, em relação às recomendações nutricionais do Guia Alimentar para a População Brasileira do Ministério da Saúde. MÉTODOS:Foram investigadas 72 empresas, caracterizadas conforme setor (indústria, serviços ou comércio), porte (micro, pequenas, médias ou grandes), modalidade do PAT (autogestão, gestão terceirizada do tipo refeição transportada ou gestão terceirizada do tipo preparo e distribuição de refeição na empresa) e supervisão de nutricionista (sim ou não). A quantidade per capita dos alimentos foi determinada nos cardápios de 3 dias de almoço, jantar e ceia. O valor nutricional das refeições foi definido com base nas variáveis energia, carboidrato, proteína, gorduras totais, gordura poliinsaturada, gordura saturada, gordura trans, açúcares livres, colesterol e frutas e hortaliças. RESULTADOS:A maioria dos cardápios teve baixa oferta de frutas e hortaliças (63,9%) e gordura poliinsaturada (83,3%) e excesso de gorduras totais (47,2%) e colesterol (62,5%). O agrupamento 2, composto principalmente por empresas de médio e grande porte do setor industrial e de serviços, com gestão terceirizada e supervisão de nutricionista, teve, em média, refeições com maior valor energético (P < 0,001), maior porcentagem de gorduras poliinsaturadas (P < 0,001), maior quantidade de colesterol (P = 0,015) e maior quantidade de frutas e hortaliças (P < 0,001) do que o agrupamento 1, composto por micro e pequenas empresas do setor de comércio, tendo autogestão como modalidade e sem supervisão de nutricionista. Quanto à adequação dos cardápios oferecidos às metas do Guia Alimentar para a População Brasileira, as refeições do agrupamento 2 foram mais adequadas em relação à oferta de frutas e hortaliças (P < 0,001). ) Em contrapartida, o agrupamento 1 apresentou maior adequação da quantidade de colesterol (P = 0,05). CONCLUSÕES: É necessária uma ação mais direcionada aos gestores de empresas e aos responsáveis pelas unidades de alimentação e nutrição, principalmente no grupo de empresas que não tem a supervisão de nutricionista

Posição materna no parto e Apgar do recém-nascido: estudo transversal

Estudo de natureza quantitativa com o objetivo de relacionar a posição materna no segundo período do trabalho de parto com as condições do recém-nascido, avaliadas pelo índice de Apgar. Foi delineado como estudo transversal, descritivo, com análise de 8.538 partos com nascidos vivos, ocorridos entre 01/01/1996 e 31/12/2005, numa maternidade-escola da Região Sul do Brasil. Foram Incluídos todos os partos via vaginal, com a mulher na posição vertical (cócoras) ou horizontal (supina ou semi sentada), com os respectivos nascituros e seus índices de Apgar. Foram identificados 5.002 (58,6 por cento) partos na posição vertical e 3.536 (41,4 por cento) na horizontal. As médias do índice de Apgar no 1º minuto foram de 8,11 nos partos verticais e 8,04 nos horizontais (p= 0,009). Na faixa etária materna de 15 a 20 anos, a média do índice de Apgar no primeiro minuto também foi maior nos partos verticais (p<0,001). Quando comparada a posição vertical com a horizontal, adotada pela parturiente no segundo período do trabalho de parto, foi observado um melhor resultado na posição vertical; nas adolescentes esta diferença foi mais acentuada. Dada a segurança, efetividade e alta aceitabilidade desta medida, é urgente que os serviços de saúde ofereçam esta possibilidade de escolha para todas as gestantes que assim prefiram ter seu parto e que foram elucidadas quanto às suas vantagens e desvantagens

Environments for nursing scholarship and journal impact factor in five countries

Background: Universities worldwide are seeking objective measures for the assessment of their faculties` research products to evaluate them and to attain prestige. Despite concerns, the impact factors (IF) of journals where faculties publish have been adopted. Research objective: The study aims to explore conditions created within five countries as a result of policies requiring or not requiring faculty to publish in high IF journals, and the extent to which these facilitated or hindered the development of nursing science. Design: The design was a multiple case study of Brazil, Taiwan, Thailand (with IF policies, Group A), United Kingdom and the United States (no IF policies, Group B). Key informants from each country were identified to assist in subject recruitment. Methods: A questionnaire was developed for data collection. The study was approved by a human subject review committee. Five faculty members of senior rank from each country participated. All communication occurred electronically. Findings: Groups A and B countries differed on who used the policy and the purposes for which it was used. There were both similarities and differences across the five countries with respect to hurdles, scholar behaviour, publishing locally vs. internationally, views of their science, steps taken to internationalize their journals. Conclusions: In group A countries, Taiwan seemed most successful in developing its scholarship. Group B countries have continued their scientific progress without such policies. IF policies were not necessary motivators of scholarship; factors such as qualified nurse scientists, the resource base in the country, may be critical factors in supporting science development.