Training Development for Pavement Preservation, RB07-011, 2013

This research project strives to help the Iowa Department of Transportation (DOT) fully achieve the full benefits of pavement preservation through training on proper selection, design, and application of pavement preservation treatments. In some cases, there is a lack of training when conducting one of these steps and the objective of applying pavement preservation techniques is compromised. Extensive amounts of literature on pavement preservation exist, but a structured approach on how to train staff in selecting, designing, and applying pavement preservation techniques is lacking. The objective of this project was to develop a training-oriented learning management system to address pavement preservation treatments (chip seals, fog seals, slurry systems, and crack seals and fills) as they are dealt with during the phases of selection, design, and construction. Early in the project, it was critical to identify the staff divisions to be trained and the treatments to be included. Through several meetings with the Iowa DOT, three staff divisions were identified: maintenance staff (in charge of selection), design staff, and construction staff. In addition, the treatments listed above were identified as the focus of the study due to their common use. Through needs analysis questionnaires and meetings, the knowledge gap and training needs of the agency were identified. The training modules developed target the gap from the results of the needs analysis. The concepting (selection) training focuses on providing the tools necessary to help make proper treatment selection. The design training focuses on providing the information necessary on the treatment materials (mostly binders and aggregates) and how to make proper material selection. Finally, the construction training focuses on providing equipment calibration procedures, inspection responsibilities, and images of poor and best practices. The research showed that it is important to train each division staff (maintenance, design, and construction) separately, as each staff division has its own needs and interests. It was also preferred that each treatment was covered on an individual basis. As a result of the research, it is recommended to evaluate the performance of pavement preservation treatments pre- and post-training continuously to compare results and verify the effectiveness of the learning management system.

The Transformation of Practical Teaching Focusing on Dialogic Learning

This study investigates the transformation of practical teaching in a Catalan school, connected to the design, implementation and development of project-based learning, and focusing on dialogic learning to investigate its limits and possibilities. Qualitative and design-based research (DBR) methods are applied. These methods are based on empirical educational research with the theory-driven of learning environments. DBR is proposed and applied using practical guidance for the teachers of the school. It can be associated with the current proposals for Embedding Social Sciences and Humanities in the Horizon 2020 Societal Challenges. This position statement defends the social sciences and the humanities as the most fundamental and important ideas to face all societal challenges. The results of this study show that before the training process, teachers apply dialogic learning in specific moments (for example, when they speak about the weekend); however, during the process and after the process, they work systematically with dialogic learning through the PEPT: they start and finish every activity with a individual and group reflection about their own processes, favouring motivation, reasoning and the implication of all the participants. These results prove that progressive transformations of teaching practice benefit cooperative work in class

Customer reference marketing in a business to business context

This study focuses on the phenomenon of customer reference marketing in a business tobusiness (B to B) context. Although customer references are generally considered an important marketing and sales tool, the academic literature has paid surprisingly little attention to the phenomenon. The study suggests that customer references could be viewed as important marketing assets for industrial suppliers, and the ability to build, manage and leverage customer reference portfolios systematically constitutes a relevant marketing capability. The role of customer references is examined in the context of the industrial suppliers' shift towards a solution and project orientation and in the light of the on going changes in the project business. Suppliers in several industry sectors are undergoing a change from traditional equipment manufacturing towards project and solution oriented business. It is argued in this thesis that the high complexity, the project oriented nature and the intangible service elements that characterise many contemporary B to B offerings further increase the role of customer references. The study proposes three mechanisms of customer reference marketing: status transfer, validation through testimonials and the demonstration of experience and prior performance. The study was conducted in the context of Finnish B to B process technology and information technology companies. The empirical data comprises 38 interviews with managers of four case companies, 165 customer reference descriptions gathered from six case companies' Web sites, as well as company internal material. The findings from the case studies show that customer references have various external and internal functions that contribute to the growth and performance of B to B firms. Externally, customer references bring status transfer effects from reputable customers, concretise and demonstrate complex solutions, and provide indirect evidence of experience, previous performance, technological functionality and delivered customer value. They can also be leveraged internally to facilitate organisational learning and training, advance offering development, and motivate personnel. Major reference projects create new business opportunities and can be used as a vehicle for strategic change. The findings of the study shed light on the on going changing orientations in the project business environment, increase understanding of the variety of ways in which customer references can be deployed as marketing assets, and provide a framework of the relevant tasks and activities related to building, managing and leveraging a firm's customer reference portfolio. The findings contribute to the industrial marketing research, to the literature on marketing assets and capabilities and to the literature on projects and solutions. The proposed functions and mechanisms of customer reference marketing bring a more thorough and structured understanding about the essence and characteristics of the phenomenon and give a wide ranging view of the role of customer references as marketing assets for B to B firms. The study suggests several managerial implications for industrial suppliers in order to systematise customer reference marketing efforts.

Supply network risks and costs in Finnish project business

This report summarizes the results of the survey HAVERI – Supply network risks in business. The survey was conducted in Finland during the spring and summer of year 2013. The survey is part of a large two-year research project started in June 2012 in Finland (on-going 06/2012–07/2014). The project is launched and financed by TEKES, the Finnish Funding Agency for Technology and Innovation, and executed together with the researchers from Lappeenranta University of Technology and Tampere University of Technology. The overall goal of this on-going research project is to find out the decision-making practices in the project-oriented companies in their purchasing decisions especially in the mechanical engineering and construction industries in Finland. The objective of the survey was to gain cross-sectional data concerning the challenges, risks and cost factors in Finnish project business companies. The results show that Finnish companies rely on their experience and supplier references in their risk management. In general, the understanding of the total cost structure varies among the industries and companies. The main cost factor in risk management was costs before the actual purchase decision. Overall, it seems that the monetary value of the whole project and capability of purchasing personnel are the main influencing factors on risk management activity in project purchasing.

PBL and B-Learning for Civil Engineering Students in a Transportation Course

The results of a pedagogical strategy implemented at the University of Sao Paulo at Sao Carlos are presented and discussed. The initiative was conducted in a transportation course offered to Civil Engineering students. The approach is a combination of problem-based learning and project-based learning (PBL) and blended-learning (B-learning). Starting in 2006, a different problem was introduced every year. From 2009 on, however, the problem-based learning concept was expanded to project-based learning. The performance of the students was analyzed using the following elements: (1) grades in course activities; (2) answers from a questionnaire designed for course evaluation; and (3) cognitive maps made to assess the effects of PBL through the comparison of the responses provided by the students involved and those not involved in the experiment. The results showed positive aspects of the method, such as a strong involvement of several students with the subject. A gradual increase in the average scores obtained by the students in the project activities (from 6.77 in 2006 to 8.24 in 2009) was concomitant with a better evaluation of these activities and of the course as a whole (90 and 97% of options "Good" or "Very good" in 2009, respectively). A growing interest in the field of transportation engineering as an alternative for further studies was also noticed. DOI: 10.1061/(ASCE)EI.1943-5541.0000115. (C) 2012 American Society of Civil Engineers.

The Impact of Gender and Pedagogy on the Development of Self-Regulated Learning Strategies in Undergraduate Engineering Classrooms

The purpose of this paper is to examine ways in which pedagogy and gender of instructor impact the development of self-regulated learning strategies as assessed by the Motivated Strategies for Learning Questionnaire (MSLQ) in male and female undergraduate engineering students. Pedagogy was operationalized as two general formats: lecture plus active learning techniques or problem-base/project-based learning. One hundred seventy-six students from four universities participated in the study. Within-group analyses found significant differences with regard to pedagogy, instructors’ gender, and student gender on the learning strategies and motivation subscales as operationalized by the MSLQ. Male and females students reported significant post-test differences with regard to the gender of instructor and the style of pedagogy. The results of this study showed a pattern where more positive responses for students of both genders were found with the same-gendered instructor. The results also suggested that male students responded more positively to project and problem-based courses with changes evidenced in motivation strategies and resource management. Female students showed decreases in resource management in these two types of courses. Further, female students reported increases in the lecture with active learning courses.

Berufsschulen auf dem Weg zum E-Learning

Das Primärziel des BLK-Modellversuchs „E-Learning zur Unterstützung des Lernfeldkonzepts (ELLFE)“ ist die Entwicklung und Ausgestaltung des Lernfeldkonzepts durch E-Learning-gestützte Lernsituationen. Der mediale Schwerpunkt soll erprobt werden, da angenommen wird, dass der Lernfeldunterricht durch die Potentiale des E-Learning flankiert werden kann. Der Artikel stellt neben den theoretischen Vorüberlegungen zu dem Projekt einige konkrete Umsetzungsbeispiele sowie gegenwärtige Evaluationsbefunde vor.

Berufsschulen auf dem Weg zum E-Learning

Das Primärziel des BLK-Modellversuchs „E-Learning zur Unterstützung des Lernfeldkonzepts (ELLFE)“ ist die Entwicklung und Ausgestaltung des Lernfeldkonzepts durch E-Learning-gestützte Lernsituationen. Der mediale Schwerpunkt soll erprobt werden, da angenommen wird, dass der Lernfeldunterricht durch die Potentiale des E-Learning flankiert werden kann. Der Artikel stellt neben den theoretischen Vorüberlegungen zu dem Projekt einige konkrete Umsetzungsbeispiele sowie gegenwärtige Evaluationsbefunde vor.

Competence Monitoring in Project Teams by using Web based portfolio management systems

This paper reports a learning experience related to the acquisition of project management competences. Students from three different universities and backgrounds, cooperate in a common project that drives the learning-teaching process. Previous related works on this initiative have already evaluated the goodness of this multidisciplinary, project-based learning approach in the context of a new educative paradigm. Yet the innovative experience has allowed the authors to define a rubric in order to measure specific competences in project management. The study shows the rubric’s main aspects as well as competence acquisition evaluation alternatives, based in the metrics defined. Key indicators and specific reports obtained from data base fields in the web tool will support this work. As a result, new competences can be assessed, such ones like teamwork, problem solving, communication and leadership. Final goal is to provide an overall competence map to the students at the same time they improve their skills.

The integration of project competences within the post-graduate programme: a case study of the International Masters in Rural Development AGRIS MUNDUS

Experiences relating to the InternationalMasters in Rural Development from the Technical University of Madrid (Universidad Politécnica de Madrid, UPM), the first Spanish programme to receive a mention as a Registered Education Programme by InternationalProject Management Association (IPMA) are considered. Backed by an educational strategy based on Project-Based Learning dating back twenty years, this programme has managed to adapt to the competence evaluation requirements proposed by the European Space for Higher Education (ESHE). In order to do this the training is linked to the professional qualification using competences as a reference leading to the qualification in project management as established by the IPMA.

Competence assessment of final year projects for undergraduate telecommunication students

The value of project-based learning has lead to the inclusion of project development activities in engineering courses, being the Final Year Project (FYP) the most remarkable one. Several approaches have been proposed for assessing and grading FYPs but, among them, rubrics are becoming a standard for such type of assessment. However, due to the different characteristics and orientations of the projects (some are more practically oriented, some more theoretically), and the high amount of different competences to be evaluated (knowledge, working capability, communication skills, etc.), the definition of one unique rubric suitable for the evaluation of all FYPs presented in different degree programs, is a big challenge. In a former work, the educational outcomes expected from the FYP were defined and resulted in a proposal for their assessment. Afterwards, the proposal has been tested during one year within an educational innovation-project at the Universidad Politécnica de Madrid which involved the follow-up of 8 undergraduate telecommunication students elaborating their FYPs. In this publication, our experience will be described, based on the emerging work taking place through the formalisation of the process which consisted in the following steps: i) establishment of a schedule for the whole process (publication of FYPs topics, selection of applying students and their enrolment, assignation of a jury to each FYP, elaboration and follow-up of FYPs, final report submission, oral presentation, etc.); ii) design of rubrics for each of three assessment parts: working process, final report and oral presentation; and iii) follow-up and evaluation of the involved FYPs. Finally, problems that appeared during this experience (e.g. administrative aspects, criticisms and suggestions from the students, tutors and juries involved) are discussed and some modifications in the assessment system will be proposed in order to solve or minimize these problems.

La literatura: una aproximació a Jaume I a través dels projectes

En aquest article analitzem les possibilitats de la metodologia del treball per projectes, vinculats a aspectes culturals per a l’ensenyament de la literatura. El nostre estudi parteix d’un projecte dut a terme en un centre de l’Horta Sud. El nostre objectiu és donar a conèixer la importància del rei Jaume I i aproximar la literatura als joves valencians a través de la festa del 9 d’Octubre. El nostre és un integral en què totes les àrees treballaran conjuntament durant dues setmanes i mitja en una franja horària determinada. Aquest treball és destinat al curs de segon d’ESO d’un centre amb un nivell socioeconòmic mitjà-alt i on la llengua vehicular és el valencià.

Cuidados de enfermagem ao cliente internado na UCPA submetido a cateterização vesical

Relatório de Trabalho de Projeto apresentado para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Enfermagem Médico-Cirúrgica

Learning by inductive inference /

"Invited paper for the NATO Advanced Study Institute Seminar on Computer Oriented Learning Processes, Aug. 26-Sept. 7, 1974, Bonas, France."