Efficiency of sampling methods and effort to assess arthropod diversity in Azorean native forests

The BALA project (Biodiversity of Arthropods of Laurisilva of the Azores) is a research initiative to quantify the spatial distribution of arthropod biodiversity in native forests of the Azores archipelago. Arthropods were collected using a combination of two techniques, targeting epigean (ground dwelling) and canopy (arboreal) arthropods: pitfall traps (with Turquin and Ethylene solutions) and beating samples (using the three most dominant plant species). A total of 109 transects distributed amongst 18 forest fragments in seven of the nine Azorean islands were used in this study. The performance of alternative sampling methods and effort were tested. No significant differences were found in the accumulated number of species captured whether an alternative method was used or whether another transect with similar effort was established in another location within the same fragment. A combination of Ethylene and Turquin traps captured more species per individual, Turquin and beating captured more species per sample, and Turquin captured more species per unit time. An optimization exercise was performed and we found that the protocol applied during recent years is very close to optimal, allowing its future replication with confidence. The minimum combinations of sampling effort and methods, in order to monitor or to inventory diversity, taking into account different proportions of sample completeness are discussed.

Fungal contamination in feed production in Portugal: what to expect regarding mycotoxins contamination?

Fungi on crops produce mycotoxins in the field, during handling, and in storage. Exposure of animals and humans are usually through consumption of contaminated feedstuffs or foods. Molds can grow and mycotoxins can be produced either pre-harvest or post-harvest, during storage, transport, processing, or feeding. Worldwide, approximately 25% of crops are affected by mycotoxins annually. Because of this is possible to concluded that mycotoxins occur frequently in a variety of feedstuffs that are given to animals causing several effects: subclinical losses in performance, increases the incidence of disease and reduced reproductive performance. Aim of study: A study was developed intending to know environmental fungal contamination in a Portuguese feed production unit. Corn, wheat and soybeans were the most common cereals used in the feed production.

Production, purification and characterisation of polysaccharides from pleurotus ostreatus with antitumor activity

Background: Mushroom polysaccharides play an important role in functional foods because they exhibit biological modulator properties such as antitumour, antiviral and antibacterial activities. The present study involved the production, purification and characterisation of intracellular and extracellular free and protein-bound polysaccharides from Pleurotus ostreatus and the investigation of their growth-inhibitory effect on human carcinoma cell lines. Results: Several fermentation parameters were obtained: batch polysaccharide productivities of 0.013 +/- 8.12 x 10-5 and 0.037 +/- 0.0005 g L-1 day-1 for intracellular and extracellular polysaccharides respectively, a maximum biomass concentration of 9.35 +/- 0.18 g L-1, Pmax = 0.935 +/- 0.018 g L-1 day-1, µmax = 0.218 +/- 0.02 day-1, YEP/X = 0.040 +/- 0.0015 g g-1 and YIP/X = 0.014 +/- 0.0003 g g-1. Some polysaccharides exhibited superoxide dismutase (SOD)-like activity of 50-200 units. Fourier transform infrared analysis of the polysaccharides revealed absorption bands characteristic of such biological macromolecules. Cytotoxicity assays showed that both intracellular and extracellular polysaccharides exhibited antitumour activity towards several tested human carcinoma cell lines in a dose-dependent manner. Conclusion - The polysaccharides of P. ostreatus exhibited high SOD-like activity, which strongly supports their biological effect on tumour cell lines. The extracellular polysaccharides presented the highest antitumour activity towards the RL95 carcinoma cell line and should be further investigated as an antitumour agent.

Chemical analysis of 17th century Millefiori glasses excavated in the Monastery of Sta. Clara‐a‐Velha: comparison with Venetian and façon‐de‐Venise production

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Conservação e Restauro,Área de especialização Cerâmica e Vidro

Estudo e Implementação de Ferramentas Lean

Neste documento, apresenta-se o reflexo sobre o trabalho de estágio desenvolvido entre 17 de Fevereiro e 31 de Julho de 2014, nas instalações da Fábrica das Estruturas Metálicas da Faurecia, em São João da Madeira, num Projecto Final no âmbito de Implementação de Ferramentas Lean. O objetivo proposto foi a participação na procura e implementação de soluções, com vista à melhoria contínua do sistema de produção. Foi utilizado, para esse efeito, um vasto conjunto de ferramentas entre as quais os 5S, QRCI, Standardized Work, entre outras e amplamente empregues na indústria automóvel (e nesta empresa em particular), através do Sistema de Excelência Faurecia (FES), aplicado ao ramo de negócio onde está solidamente implantada esta multinacional de origem francesa. O período de tempo em que decorreu o estágio constituiu uma oportunidade única para o estagiário contactar com os problemas existentes no departamento de produção, num mercado tão concorrencial e competitivo como é o da indústria de componentes para automóveis. O presente trabalho de estágio apresenta duas vertentes distintas: uma de caráter interno à empresa e outra relativa aos fornecedores e clientes. Em termos internos, foi visível a batalha pela diminuição das variabilidades que surgem no plano da produção ao absorver grande parte do esforço dos agentes que trabalham na otimização dos processos. Externamente, observou-se a dificuldade em encontrar fornecedores adequados a satisfazer os aprovisionamentos da Faurecia, em quantidade e qualidade, e um elevado grau de exigência imposto por parte dos vários clientes. Por fim, este Projeto possibilitou a aplicação de conhecimentos adquiridos não só ao longo do curso como também durante a realização do estágio, o conhecimento da realidade industrial e o enriquecimento técnico e pessoal.

Per-unit royalty and fixed-fee licensing in a differentiated Stackelberg model

In the present paper we consider a differentiated Stackelberg model, when the leader firm engages in an R&D process that gives an endogenous cost-reducing innovation. The aim is to study the licensing of the cost-reduction by a per-unit royalty and a fixed-fee. We analyse the implications of these types of licensing contracts over the R&D effort, the profits of the firms, the consumer surplus and the social welfare. By using comparative static analysis, we conclude that the degree of the differentiation of the goods plays an important role in the results.

Differences in exoenzyme production and adherence ability of Candida spp. isolates from catheter, blood and oral cavity

Phospholipase and proteinase production and the ability of adhesion to buccal epithelial cells (BEC) of 112 Candida isolates originated from oral cavity of HIV infected patients and from blood and catheter of intensive care unit patients were investigated. The proteinase production was detected by inoculation into bovine serum albumin (BSA) agar and the phospholipase activity was performed using egg yolk emulsion. A yeast suspension of each test strain was incubated with buccal epithelial cells and the number of adherence yeast to epithelial cells was counted. A percentage of 88.1% and 55.9% of Candida albicans and 69.8% and 37.7% of non-albicans Candida isolates produced proteinase and phospholipase, respectively. Non-albicans Candida isolated from catheter were more proteolytic than C. albicans isolates. Blood isolates were more proteolytic than catheter and oral cavity isolates while oral cavity isolates produced more phospholipase than those from blood and catheter. C. albicans isolates from oral cavity and from catheter were more adherent to BEC than non-albicans Candida isolates, but the adhesion was not different among the three sources analyzed. The results indicated differences in the production of phospholipase and proteinase and in the ability of adhesion to BEC among Candida spp. isolates from different sources. This study suggests that the pathogenicity of Candida can be correlated with the infected site.

Revisão dos tempos-padrão no setor de construção de pneus

Este relatório de estágio foi desenvolvido no âmbito do estágio de final de curso, em ambiente industrial, do Mestrado em Engenharia e Gestão Industrial da ESEIG. O estágio foi realizado na Continental Mabor S.A., situada em Vila Nova de Famalicão, mais especificamente no Departamento de Engenharia Industrial. A indústria dos pneus está inserida num mercado cada vez mais competitivo e exigente, em que os custos e os prazos de entrega devem ser cada vez menores e a qualidade do produto cada vez maior. Por esses motivos, é necessária uma constante melhoria dos processos produtivos. Para que este esforço de melhoria contínua seja bem-sucedido é necessário recorrer por vezes a prémios de produção, para incentivar uma maior produtividade. Contudo cada pneu tem tempos de produção diferentes de máquina para máquina e é preciso corrigir esses tempos em prol de uma justa atribuição de prémios. O presente trabalho teve como principal objetivo atualizar as perturbações e atualizar os tempos-máquina no setor de construção de pneus. Inicialmente foi recolhido o tempo de aplicação do capply (material que pertence ao pneu) para futuramente verificar se será possível prever o tempo de aplicação de capply, consoante os metros de aplicação. Como não foi possível estabelecer uma correlação, não será exposta a análise até se chegar a essa conclusão. Depois fez-se o estudo das perturbações, com recurso à cronometragem, na maior das cinco divisões da fábrica - a construção. Por último fez-se a recolha dos tempos-máquina de vários tipos de construção de pneus em todos os módulos de construção de pneus (KM e PU), através do método filmagem. Conseguiu-se singularizar os tempos para cada máquina de forma a tornar, mais justo os prémios de produção atribuídos aos operadores, no curto prazo, e optimizar a produção e o tempo-padrão.

Adapter module for self-learning production systems

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica, Sistemas e Computadores

Candida spp. isolated from inpatients, the environment, and health practitioners in the pediatric unit at the Universitary Hospital of the Jundiaí Medical College, state of São Paulo, Brazil

INTRODUCTION: This study aimed to isolate and identify Candida spp. from the environment, health practitioners, and patients with the presumptive diagnosis of candidiasis in the Pediatric Unit at the Universitary Hospital of the Jundiaí Medical College, to verify the production of enzymes regarded as virulence factors, and to determine how susceptible the isolated samples from patients with candidiasis are to antifungal agents. METHODS: Between March and November of 2008 a total of 283 samples were taken randomly from the environment and from the hands of health staff, and samples of all the suspected cases of Candida spp. hospital-acquired infection were collected and selected by the Infection Control Committee. The material was processed and the yeast genus Candida was isolated and identified by physiological, microscopic, and macroscopic attributes. RESULTS: The incidence of Candida spp. in the environment and employees was 19.2%. The most frequent species were C. parapsilosis and C. tropicalis among the workers, C. guilliermondii and C. tropicalis in the air, C. lusitanae on the contact surfaces, and C. tropicalis and C. guilliermondii in the climate control equipment. The college hospital had 320 admissions, of which 13 (4%) presented Candida spp. infections; three of them died, two being victims of a C. tropicalis infection and the remaining one of C. albicans. All the Candida spp. in the isolates evidenced sensitivity to amphotericin B, nystatin, and fluconazole. CONCLUSIONS: The increase in the rate of hospital-acquired infections caused by Candida spp. indicates the need to take larger measures regarding recurrent control of the environment.

On the standardization of the fishing effort

In this note we demonstrate that the use of an index to standardize the fishing effort using the cpue of a standard vessel or gear is mistaken, once the cpues- catch per unit of total effort after standardization is similar to cpues - catch per unit of effort of the standard vesel or gear arbitrarily chosen.

Análise e melhoria da produtividade numa empresa do sector de componentes de automóveis

Dissertação de mestrado integrado em Engenharia e Gestão Industrial

Aplicação de princípios e técnicas de Lean Manufacturing para melhoria do desempenho de linhas de montagem

Dissertação de mestrado integrado em Engenharia e Gestão Industrial

Parameter identification of the fermentative production of fructo-oligosaccharides by Aureobasidium pullulans

In this study, a mathematical model for the production of Fructo-oligosaccharides (FOS) by Aureobasidium pullulans is developed. This model contains a relatively large set of unknown parameters, and the identification problem is analyzed using simulation data, as well as experimental data. Batch experiments were not sufficiently informative to uniquely estimate all the unknown parameters, thus, additional experiments have to be achieved in fed-batch mode to supplement the missing information. © 2015 IEEE.

Valorization of agro-industrial wastes towards the production of rhamnolipids

In this work, oil mill wastewater (OMW), a residue generated during olive oil extraction, was evaluated as an inducer of rhamnolipid production. Using a medium containing as sole ingredients corn steep liquor (10%, v/v), sugarcane molasses (10%, w/v) and OMW (25%, v/v), Pseudomonas aeruginosa #112 produced 4.5 and 5.1 g of rhamnolipid per liter in flasks and reactor, respectively, with critical micelle concentrations as low as 13 mg/l. Furthermore, in the medium supplemented with OMW, a higher proportion of more hydrophobic rhamnolipid congeners was observed comparing with the same medium without OMW. OMW is a hazardous waste which disposal represents a serious environmental problem; therefore, its valorization as a substrate for the production of added-value compounds such as rhamnolipids is of great interest. This is the first report of rhamnolipid production using a mixture of these three agro-industrial by-products, which can be useful for the sustainable production of rhamnolipids.