Cargas de trabalho e evidências de seu impacto sobre a saúde de trabalhadores em bancos : estudo de caso em quatro instituições financeiras em Porto Alegre

Este trabalho estuda as relações causais entre cargas de trabalho classificadas em organizacionais, psicossociais, físico-ambientais e posturais/ do mobiliário e os seus efeitos enquanto determinantes de desgaste/ adoecimento entre os trabalhadores bancários. Tem como objetivo avaliar o “peso” e a hierarquia de cada fator ou grupo de fatores causais para a produção do efeito sobre a saúde, nesta forma auxiliando a mobilização pela transformação das realidades de trabalho. O estudo se constitui como uma apreciação ergonômica, sendo parte de um projeto mais amplo, de Vigilância em Saúde do Trabalhador, o qual é protagonizado pelo Sindicato dos Bancários de Porto Alegre. Na metodologia, valoriza a percepção coletiva dos trabalhadores acerca de suas condições de trabalho e saúde, entendendo-os como os sujeitos sociais mais habilitados para revelar o essencial a ser transformado. O estudo foi realizado através da aplicação de um questionário sigiloso e auto-aplicado, respondido por 1518 trabalhadores, dentre estes 1087 bancários, 192 estagiários e 230 terceirizados, distribuídos entre quatro instituições bancárias, dois Bancos Públicos e dois Privados. O desgaste/ adoecimento foi analisado através de estatísticas descritivas e analíticas, pelas diferenças de médias, Análise de Variança – ANOVA, Teste Duncan, Teste Exato de Fisher com Simulação de Monte Carlo, Regressão Linear Múltipla, Coeficientes de Pearson e de Determinação Entre os achados com significância estatística, tem-se uma maior intensidade das cargas de trabalho, do estresse e do desgaste/ adoecimento percebido entre os bancários do Público A e do Privado C, no sexo feminino, na função de caixa, da faixa etária entre 40 a 49 anos, entre bancários com tempo de banco acima de dois anos e jornadas de trabalho entre 8 e 10 horas. Entre todos os fatores causais analisados por diferenças de médias, as cargas de trabalho foram as que mais impactaram o desgaste/ adoecimento. Pelo Teste de Regressão Linear Múltipla e Coeficiente de Determinação, constatou-se que as cargas de trabalho do tipo organização do trabalho e psicossociais, em termos genéricos, têm pesos semelhantes entre si e impactam muito mais o desgaste/ adoecimento comparativamente às físico-ambientais e posturais/ do mobiliário. O impacto dessas cargas sobre o desgaste/ adoecimento é especialmente mais intenso no Banco Privado Grande D, que é mais moderno e reestruturado. Os fatores de maior peso estatisticamente significantes para todos os Bancos foram a atividade estressante, a desvalorização do trabalho, a exigência de esforço mental e de repetitividade das tarefas, além dos posturais. No Banco Privado Grande D, outros fatores como as posturas das chefias, remuneração inadequada, volume de trabalho excessivo, pausas insuficientes e exigência de alcançar metas também demonstraram ter grande peso explicativo para o desgaste/ adoecimento. Conclui-se que as cargas de trabalho são hierarquicamente distintas em relação à sua capacidade de determinação do adoecimento e que a reestruturação produtiva no sistema bancário incrementa grandemente os riscos à saúde dos trabalhadores.

Acumulação de competências tecnológicas e suas implicações para o aprimoramento da performance técnico-econômica em operadoras e telecomunicações fixas: a experiência da Telemar Norte Leste S.A.

Esta dissertação examina as implicações do processo de acumulação de competências tecnológicas para a melhoria da performance técnico-econômica. Este relacionamento foi examinado na Telemar Norte Leste, empresa prestadora de serviços de telefonia fixa, durante o período de 1998 a 2002. O exame da acumulação de competências é feito tendo como base uma estrutura descritiva existente na literatura e adaptada especificamente para o setor de telefonia fixa. A aplicação de estruturas descritivas para examinar as implicações da acumulação de competências tecnológicas sobre o aprimoramento da performance técnico-econômica, em empresas do setor de telecomunicações no Brasil, ainda é escassa. Esta dissertação realiza essa análise, baseada num estudo de caso individual e fundamenta-se em evidências empíricas qualitativas e quantitativas, obtidas através de entrevistas, observação direta e documentação interna. A acumulação de competências tecnológicas foi estudada em duas funções: "desenvolvimento de processos comerciais, produtos e serviços" e "desenvolvimento de sistemas de telecomunicações e processos operacionais". O exame do aprimoramento de performance está baseado num conjunto de indicadores técnico-econômicos, típicos desse setor. A análise realizada na Telemar identificou que esta desenvolveu esforços que lhe possibilitaram acumular competências inovadoras nestas funções, considerando a estrutura analítica adaptada nesta dissertação, alcançando o Nível 5 ou Intermediário, numa escala de sete níveis. Foram ainda encontradas evidências de influencias positivas para o aprimoramento da performance de vinte e nove indicadores de desempenho analisados, representativos das funções analisadas. Alinhando-se a outros estudos recentes na literatura de empresas localizadas em países em desenvolvimento, as evidências encontradas nesta dissertação sugerem que a acumulação de competências para adaptar, modificar ou criar novas tecnologias é essencial para a sobrevivência e o desempenho competitivo das firmas, exercendo papel fundamental no aprimoramento de seus indicadores de performance. Outros fatores, internos e externos, podem também influenciar a evolução das empresas. Esta dissertação comenta somente a crise mundial do setor de telecomunicações. Provocada pela drástica reversão dos investimentos vinculados à nova economia, desde 2001 tem provocado uma revisão no processo de gestão dos prestadores de serviços de telecomunicações, afetando o desempenho organizacional. Este contexto, no entanto, dada a complexidade de suas implicações, não foram aqui examinados.

Valor percebido e a nova lógica dominante de serviço : estudo da indústria brasileira de equipamentos de refrigeração para transporte de cargas

Levitt (1960) apresentou o termo Miopia em Marketing e discutiu sobre o perigo de as organizações centralizarem seu foco no produto e descuidarem da real necessidade dos clientes, já que o produto é apenas um meio para atender à necessidade do cliente e não o fim em si. Na mesma linha, Shostack (1977), quase duas décadas mais tarde, enfatizou a urgência de se entender a posição do Marketing na economia pós-industrial de serviços, em que a lógica tradicional focada em produtos não mais atendia adequadamente o mercado. Portanto, não é recente a visão de que a posse do bem físico é secundária para o atendimento das necessidades do consumidor, sendo fundamental pensar no benefício que o bem proporciona ao cliente quando do seu uso. Mais recentemente, Vargo e Lusch (2004a) retomaram a discussão sobre a importância de as organizações atentarem para as necessidades dos clientes em vez de apenas focarem na transação, ou seja, na ideia de troca de um produto por um valor monetário. Estes autores emergiram novamente com a ideia de que as empresas precisam entregar benefícios aos seus clientes e a que apropriação do serviço gerado pela oferta da empresa é mais importante do que a transferência de posse do bem físico. Eles retomam, desta forma, as ideias de Levitt e Shostack e as modificam para criar a Service-Dominant Logic ou S-D Logic, como eles denominam. A ênfase desta proposta é que o Marketing deixe de considerar a transação de produtos ou serviços como central para a criação de valor, para uma lógica centrada no serviço produzido pelo bem – produto ou serviço. Assim, passa ser fundamental entender como o valor é percebido pelo cliente na fase de uso e focar os esforços na geração desse valor, possibilitando, assim, que empresas que entendam as reais necessidades do mercado, criem vantagem competitiva sustentável. Considerando a proposta destes autores, este trabalho testou a aplicação deste conceito na indústria de equipamentos de refrigeração para transporte de cargas com temperatura controlada no Brasil. Foram entrevistados seis importantes transportadores de carga frigorificada do país, os quais foram questionados sobre o valor do serviço usufruído pela posse do bem em contraposição ao valor percebido de usufruir o serviço sem ter que comprar o bem para tal. Os entrevistados associam muito valor à posse do bem, pois, para eles, isso garante que o serviço não sofrerá interrupções, algo muito valioso para eles. Isso evidencia uma falta de confiança nas alternativas possíveis à compra do ativo pela empresa. A confiança no prestador do serviço é, portanto, elemento chave na avaliação dos benefícios, reforçando achados de estudos anteriores. Foram identificadas diferenças de atribuição de valor para as propostas alternativas de fornecimento em razão da relevância do serviço de transporte refrigerado para a empresa – negócio central ou função de apoio para o negócio central da empresa.

Aplicação do princípio da correspondência elasto-viscoelástica para previsão de deformabilidade de misturas asfálticas

Para a pesquisa, utilizou-se um concreto asfáltico com ligante modificado com borracha ensaiado nas dependências do LAPAV-UFRGS, sob compressão diametral de cargas cíclicas, cujo procedimento é brevemente descrito, associando-se os seus procedimentos com as hipóteses assumidas na modelagem, o que é importante na concepção do modelo empregado. Apresenta-se e discute-se o manuseio dos dados experimentais para o modelo, bem como a escolha do modelo constitutivo adotado, no qual se optou por um modelo viscoelástico linear anisotrópico simplificado, cujas equações base e métodos para calibração são apresentados, discutidos e comparados, bem como os resultados das calibrações dos três primeiros ciclos de carga-descanso, no qual se obteve uma excelente descrição do comportamento do material, o que foi comprovado nas previsões dos dois ciclos seguintes. As previsões de resultados a ensaios sob diferentes condições aos das calibrações mostraram resultados qualitativamente bons às freqüências de ciclo de 1 Hz, comprovados na comparação das curvas de deslocamentos normalizadas. Para a pesquisa, utilizou-se um concreto asfáltico com ligante modificado com borracha ensaiado nas dependências do LAPAV-UFRGS, sob compressão diametral de cargas cíclicas, cujo procedimento é brevemente descrito, associando-se os seus procedimentos com as hipóteses assumidas na modelagem, o que é importante na concepção do modelo empregado. Apresenta-se e discute-se o manuseio dos dados experimentais para o modelo, bem como a escolha do modelo constitutivo adotado, no qual se optou por um modelo viscoelástico linear anisotrópico simplificado, cujas equações base e métodos para calibração são apresentados, discutidos e comparados, bem como os resultados das calibrações dos três primeiros ciclos de carga-descanso, no qual se obteve uma excelente descrição do comportamento do material, o que foi comprovado nas previsões dos dois ciclos seguintes. Para a pesquisa, utilizou-se um concreto asfáltico com ligante modificado com borracha ensaiado nas dependências do LAPAV-UFRGS, sob compressão diametral de cargas cíclicas, cujo procedimento é brevemente descrito, associando-se os seus procedimentos com as hipóteses assumidas na modelagem, o que é importante na concepção do modelo empregado. Apresenta-se e discute-se o manuseio dos dados experimentais para o modelo, bem como a escolha do modelo constitutivo adotado, no qual se optou por um modelo viscoelástico linear anisotrópico simplificado, cujas equações base e métodos para calibração são apresentados, discutidos e comparados, bem como os resultados das calibrações dos três primeiros ciclos de carga-descanso, no qual se obteve uma excelente descrição do comportamento do material, o que foi comprovado nas previsões dos dois ciclos seguintes.

Método de previsão de capacidade de carga de estacas : aplicação dos conceitos de energia do ensaio SPT

A previsão da capacidade de carga de estacas constitui-se um dos desafios da engenharia de fundações por requerer, na teoria, a estimativa de propriedades do solo, suas alterações pela execução da fundação e o conhecimento do mecanismo de interação solo-estaca. Devido à dificuldade de reproduzir analítica e numericamente o mecanismo de interação solo-estaca, a prática brasileira faz uso correlações empíricas, relacionando diretamente os resultados do ensaio SPT com o desempenho do elemento de fundação. Apesar da grande contribuição dos métodos tradicionalmente utilizados, a sua validade está limitada à prática construtiva regional e às condições específicas dos casos históricos utilizados em seu estabelecimento. Com o objetivo de incorporar à engenharia de fundações brasileira um novo método de previsão de capacidade de carga de estacas, obtido diretamente a partir de ensaios SPT, desenvolveu-se nesta pesquisa uma metodologia baseada na interpretação do ensaio SPT sugerida por Odebrecht (2003). À luz desta nova interpretação, utiliza-se a força dinâmica de reação do solo à cravação do amostrador SPT para estimar a capacidade de carga de estacas, relacionando os mecanismos de mobilização de resistência do amostrador (modelo) com os da estaca (protótipo). No intuito de validar a metodologia proposta, organizou-se neste trabalho, um expressivo banco de dados compostos por 325 provas de carga à compressão e 43 provas de carga à tração, executadas em diferentes regiões do país. Das provas de carga à compressão, 132 casos são de estacas cravadas pré-moldadas de concreto, 28 de estacas metálicas, 95 de estacas hélice contínua e 70 casos de estacas escavadas. Já nas provas de carga à tração, 3 casos são de estacas cravadas pré-moldadas, 31 de estacas hélice contínua e 9 casos de estacas escavadas. Conclui-se a partir de análises comparativas entre cargas previstas e medidas que o método proposto é capaz de prever de forma satisfatória a capacidade de carga de estacas. Uma análise estatística dos dados possibilitou atribuir à estimativa de capacidade de carga, um intervalo de confiança das previsões, baseado na confiabilidade requerida para o projeto.

Metodologia de análise e diagnóstico de fratura em um componente automotivo sujeito a cargas cíclicas alternadas

The competitiveness of the trade generated by the higher availability of products with lower quality and cost promoted a new reality of industrial production with small clearances. Track deviations at the production are not discarded, uncertainties can statistically occur. The world consumer and the Brazilian one are supported by the consumer protection code, in lawsuits against the products poor quality. An automobile is composed of various systems and thousands of constituent parts, increasing the likelihood of failure. The dynamic and security systems are critical in relation to the consequences of possible failures. The investigation of the failure gives us the possibility of learning and contributing to various improvements. Our main purpose in this work is to develop a systematic, specific methodology by investigating the root cause of the flaw occurred on an axle end of the front suspension of an automobile, and to perform comparative data analyses between the fractured part and the project information. Our research was based on a flaw generated in an automotive suspension system involved in a mechanical judicial cause, resulting in property and personal damages. In the investigations concerning the analysis of mechanical flaws, knowledge on materials engineering plays a crucial role in the process, since it enables applying techniques for characterizing materials, relating the technical attributes required from a respective part with its structure of manufacturing material, thus providing a greater scientific contribution to the work. The specific methodology developed follows its own flowchart. In the early phase, the data in the records and information on the involved ones were collected. The following laboratory analyses were performed: macrography of the fracture, micrography with SEM (Scanning Electron Microscope) of the initial and final fracture, phase analysis with optical microscopy, Brinell hardness and Vickers microhardness analyses, quantitative and qualitative chemical analysis, by using X-ray fluorescence and optical spectroscopy for carbon analysis, qualitative study on the state of tension was done. Field data were also collected. In the analyses data of the values resulting from the fractured stock parts and the design values were compared. After the investigation, one concluded that: the developed methodology systematized the investigation and enabled crossing data, thus minimizing diagnostic error probability, the morphology of the fracture indicates failure by the fatigue mechanism in a geometrically propitious location, a tension hub, the part was subjected to low tensions by the sectional area of the final fracture, the manufacturing material of the fractured part has low ductility, the component fractured in an earlier moment than the one recommended by the manufacturer, the percentages of C, Si, Mn and Cr of the fractured part present values which differ from the design ones, the hardness value of the superior limit of the fractured part is higher than that of the design, and there is no manufacturing uniformity between stock and fractured part. The work will contribute to optimizing the guidance of the actions in a mechanical engineering judicial expertise

Tubulações de PRFV com adição de areia quartzosa visando sua aplicação na indústria do petróleo

Fillers are often added in composites to enhance performance and/or to reduce cost. Fiberglass pipes must meet performance requirements and industrial sand is frequently added for the pipe to be cost competitive. The sand is added to increase pipe wall thickness, thus increase pipe stiffness. The main goal of the present work is to conduct an experimental investigation between pipes fabricated with and without de addition of sand, to be used in the petroleum industry. Pipes were built using E-glass fibers, polyester resin and siliceous sand. The fabrication process used hand lay up and filament winding and was divided in two different parts: the liner and the structural wall. All tested pipes had the same liner, but different structural wall composition, which is the layer where siliceous sand may be added or not. The comparative investigation was developed considering the results of longitudinal tensile tests, hoop tensile tests, hydrostatic pressure leak tests and parallel-plate loading stiffness tests. SEM was used to analyze if the sand caused any damage to the glass fibers, during the fabrication process, because of the fiber-sand contact. The procedure was also used to verify the composite conditions after the hydrostatic pressure leak test. The results proved that the addition of siliceous sand reduced the leak pressure in about 17 %. In the other hand, this loss in pressure was compensated by a stiffness increment of more than 380 %. MEV analyses show that it is possible to find damage on the fiber-sand contact, but on a very small amount. On most cases, the contact occurs without damage evidences. In summary, the addition of sand filler represented a 27.8 % of cost reduction, when compared to a pipe designed with glass fiber and resin only. This cost reduction combined to the good mechanical tests results make siliceous sand filler suitable for fiberglass pressure pipes

Avaliação mecânica e microestrutural de compósitos de poliéster com adição de cargas minerais e resíduos industriais

With the current growth in consumption of industrialized products and the resulting increase in garbage production, their adequate disposal has become one of the greatest challenges of modern society. The use of industrial solid residues as fillers in composite materials is an idea that emerges aiming at investigating alternatives for reusing these residues, and, at the same time, developing materials with superior properties. In this work, the influence of the addition of sand, diatomite, and industrial residues of polyester and EVA (ethylene vinyl acetate), on the mechanical properties of polymer matrix composites, was studied. The main objective was to evaluate the mechanical properties of the materials with the addition of recycled residue fillers, and compare to those of the pure polyester resin. Composite specimens were fabricated and tested for the evaluation of the flexural properties and Charpy impact resistance. After the mechanical tests, the fracture surface of the specimens was analyzed by scanning electron microscopy (SEM). The results indicate that some of the composites with fillers presented greater Young s modulus than the pure resin; in particular composites made with sand and diatomite, where the increase in modulus was about 168 %. The composites with polyester and EVA presented Young s modulus lower than the resin. Both strength and maximum strain were reduced when fillers were added. The impact resistance was reduced in all composites with fillers when compared to the pure resin, with the exception of the composites with EVA, where an increase of about 6 % was observed. Based on the mechanical tests, microscopy analyses and the compatibility of fillers with the polyester resin, the use of industrial solid residues in composites may be viable, considering that for each type of filler there will be a specific application

Aplicação da água residuária das salinas no tratamento de efluente têxtil

The treatment of colored and alkaline effluent has been a challenge to the textile industry. An alternative to remove the colors of those effluents is applying magnesium chloride as a coagulant agent. The magnesium ion, in high pH, hydrolyzes itself, forming the magnesium hydroxide which has a large adsorptive area and positive electrostatic charges able to act as an efficient coagulant. The bittern wastewater from the salt industries has been studied as a potential font of this magnesium ion. Nowadays, this bittern wastewater is evicted into the sea, without any treatment or other use. This thesis has evaluated the potential of applying the wastewater from the salt industries in the treatment of dyeing effluent containing indigo dye and alkaline pH. All the experiments were made in jar tests simulating the chemical coagulation, flocculation and decantation steps ranging the pH and the concentration of magnesium ion. Were obtained removals between 96% and 76% for turbidity, apparent color, and true color, respectively, using 200mg/L Mg2+. The reduction of costs with acid, when were used the salt industries wastewater, comparing with Al2(SO4)3, was 62%. For the degradation of organic matter remaining in the clarified, around 900 mg/L, was applyed the advanced process of oxidation: photo-Fenton. The preliminary results showed 57% reduction in DOC. According to the results obtained, the salt industries wastewater can be applied, as coagulant, in the physical-chemical treatment of the denim dyeing wastewater, so it is not necessary a previous adjust of pH, efficiently and economically

Avaliação da desadaptação das selas de próteses parciais removíveis após 1 a 5 anos de uso

The non-adaptation of the removable partial prosthesis (RPP) base to fibromucosal tissue is caused by resorption of residual ridges (RRR). The onset of bone resorption, which occurs after tooth extraction and continues throughout life, is accelerated by local or systemic factors. Aim: Assess the degree of non-adaptation of removable partial prosthesis saddles and the factors that influence it. Methodology: A sectional study was conducted with 81 patients using RPP who had their prostheses installed between 2003 and 2007 (1 to 5 years of use) at the Faculty of Dentistry of the Universidade Federal do Rio Grande do Norte (UFRN). After anamnese and clinical examination, a cast was made with polyether-based material, using the base of the prosthesis to make the impression. The base of the saddle was loaded with the casting material and positioned in the mouth, applying pressure on the supports. After polymerization, the material was removed from the saddle and measurements were taken at 3 different points using a pachymeter. Results: The non-adaptation of the saddle increased significantly with years of use (p = 0.005). The tooth-tissue supported prostheses obtained higher mean non-adaptation values than those of tooth supported prostheses (p < 0.001). Flaccid mucosa showed the worst non-adaptation results, which were statistically different from resilient mucosa (p < 0.001). The greater the extension of the saddle, the greater the non-adaptation (p < 0.001). The natural tooth antagonistic arch yielded better results than did RPP and total prosthesis (p < 0.001). Saddle non-adaptation at the free end was less near the pillar tooth and greater in the more posterior region (p < 0.001). When adaptation of the supports to the niches was poor, greater saddle non-adaptation occurred than when it was good or fair (p < 0.001). Saddles located in the posterior region of the arch had greater non-adaptation than those in the anterior region (p = 0.023). Conclusion: The mean non-adaptation of the saddle to the residual ridges was 0.27 mm. It can be concluded that, even with the use of RPP, bone height reduction was slight within the 1-5-year period of use. The following are factors that influence adaptation of the RPP saddle base: years of use, age, force transmission path to the alveolar bone, location of the toothless area, antagonistic arch, type of mucosa, adaptation of supports to the niche and extension of the saddle

Avaliação clínica e comparativa da oclusão balanceada bilateral e desoclusão com guia canino sobre a função mastigatória de usuários de prótese total removível

The maintenance of masticatory function is especially important for patients who wear complete dentures due to the limitations of this type of prosthesis. Thus, the bilateral balanced occlusion (BBO) is used to achieve, besides other advantages, greater masticatory efficiency. However, analyzing critically the literature, it is observed that there is not enough scientific evidence that support the BBO as the most appropriate occlusal concept in complete dentures. This way, the purpose of the present study was to verify if complete dentures wearers with BBO present better masticatory efficiency and capacity than those with canine guidance (CG). A double-blind controlled crossover clinical trial was conducted. The sample was made of 24 completely edentulous patients. The subjects wore sets of complete dentures with both occlusal concepts for equal periods of 3 months. Objective data were collected through the masticatory efficiency test, performed by the colorimetric method, in which capsules of a synthetic material enclosing fuchsine- containing granules were used. Subjective data were recorded by patient´s ratings of their chewing function, which is the masticatory ability. No significant statistical difference was found for masticatory efficiency (p=0,0952) and masticatory ability (x2=0,5711/ p=0,4498) between the two occlusal concepts studied, as well as there was no correlation between these two variables (p=0,2985). Based on these results, it seems reasonable to use CG for the setup of complete dentures, since it is an easier and quicker technical procedure, until that future researches can come to complement this question

Avaliação clínica longitudinal do periodonto de dentes pilares e não pilares de próteses parciais removíveis

The literature has shown a relation between periodontics and the removable partial denture (RPD), with progressive destruction observed in the support structures. The aim of this study was to clinically assess periodontal condition in users of removal partial denture (RPD), and compare right abutments teeth, indirect abutments and controls before installation and after 1 year, in addition to comparing tooth-supported and tooth mucosa-supported abutments. A total of 50 patients, 32 women and 18 men, mean age of 45 years, took part in the study. The patients were examined by a single examiner at prosthesis installation and after 3, 6, 9 and 12 months. The following were verified at each examination: Probe Depth (PD), Plaque Index (PI), Gingival Index (GI), the amount of Keratinized Mucosa (KM), Gingival Recession (GR) and Dental Mobility (DM); in addition patients received oral hygiene orientation, accompanied by prophylaxis, periodontal scaling and root planing (PSRP), when necessary. Analysis of Variance (ANOVA) with Tukey-Kramer post test was used to assess the dependent variables (PD, PI, KM, GR) of the three groups over time while Friedman s test was used for GI. To assess the outcomes of prosthesis type in the right abutment group, a confidence interval-based analysis was performed. The results showed that the control group was the least compromised in all the variables studied. With respect to development of the groups over time, it was verified that the measures for GR, PD, GI and KM increased from initial examination to 1 year of use in all the groups, but only PI showed a significant increase. There was a non-discriminatory low prevalence of dental mobility. The tooth mucosa-supported prosthesis had significantly higher values for GR, GI and PI and significantly lower ones for KM when compared to tooth-supported. Over time, both types of prostheses showed no significant differences from initial to final examination for the variables GR, PD, KM and GI, with PI significant only for tooth-supported. The results showed that the teeth most involved in RPD design had greater potential of periodontal damage, probably because of greater dental biofilm accumulation. Abutments elements adjacent to the free extremities had less favorable periodontal condition than those adjacent to interpolated spaces, but the use of RPD did not worsen the initial condition

Obtenção de polímeros graftizados de quitosana e estudo das propriedades físico-químicas para aplicação na indústria do petróleo

Chitosan is a biopolymer derived from the shells of crustaceans, biodegradable, inexpensive and renewable with important physical and chemical properties. Moreover, the different modifications possible in its chemical structure generate new properties, making it an attractive polysaccharide owing to its range of potential applications. Polymers have been used in oil production operations. However, growing concern over environmental constraints has prompted oil industry to search for environmentally sustainable materials. As such, this study sought to obtain chitosan derivatives grafted with hydrophilic (poly(ethylene glycol), mPEG) and/or hydrophobic groups (n-dodecyl) via a simple (one-pot) method and evaluate their physicochemical properties as a function of varying pH using rheology, small-angle Xray scattering (SAXS), dynamic light scattering (DLS) and zeta potential. The chitosan derivatives were prepared using reductive alkylation under mild reaction conditions and the chemical structure of the polymers was characterized by nuclear magnetic resonance (1H NMR) and CHN elemental analysis. Considering a constant mPEG/Chitosan molar ratio on modification of chitosan, the solubility of the polymer across a wide pH range (acidic, neutral and basic) could only be improved when some of the amino groups were submitted to reacetylation using the one-pot method. Under these conditions, solubility is maintained even with the simultaneous insertion of n-dodecyl. On the other hand, the solubility of derivatives obtained only through mPEG incorporation using the traditional methodology, or with the ndodecyl group, was similar to that of its precursor. The hydrophilic group promoted decreased viscosity of the polymer solutions at 10 g/L in acid medium. However, at basic pH, both viscosity and thermal stability increased, as well as exhibited a pronounced pseudoplastic behavior, suggesting strong intermolecular associations in the alkaline medium. The SAXS results showed a polyelectrolyte behavior with the decrease in pH for the polymer systems. DLS analyses revealed that although the dilute polymer solutions at 1 g/L and pH 3 exhibited a high density of protonated amino groups along the polymer chain, the high degree of charge contributed significantly to aggregation, promoting increased particle size with the decrease in pH. Furthermore, the hydrophobic group also contributed to increasing the size of aggregates in solution at pH 3, whereas the hydrophilic group helped reduce their size across the entire pH range. Nevertheless, the nature of aggregation was dependent on the pH of the medium. Zeta potential results indicated that its values do not depend solely on the surface charge of the particle, but are also dependent on the net charge of the medium. In this study, water soluble associative polymers exhibit properties that can be of great interest in the petroleum industry

Avaliação das propriedades físico-químicas de sistemas a base de carboximetilcelulose e poli (N-isopropilacrilamida) em soluções aquosas para aplicação na indústria do petróleo

Sustainable development is a major challenge in the oil industry and has aroused growing interest in research to obtain materials from renewable sources. Carboxymethylcellulose (CMC) is a polysaccharide derived from cellulose and becomes attractive because it is water-soluble, renewable, biodegradable and inexpensive, as well as may be chemically modified to gain new properties. Among the derivatives of carboxymethylcellulose, systems have been developed to induce stimuli-responsive properties and extend the applicability of multiple-responsive materials. Although these new materials have been the subject of study, understanding of their physicochemical properties, such as viscosity, solubility and particle size as a function of pH and temperature, is still very limited. This study describes systems of physical blends and copolymers based on carboxymethylcellulose and poly (N-isopropylacrylamide) (PNIPAM), with different feed percentage compositions of the reaction (25CMC, 50CMC e 75CMC), in aqueous solution. The chemical structure of the polymers was investigated by infrared and CHN elementary analysis. The physical blends were analyzed by rheology and the copolymers by UV-visible spectroscopy, small-angle X-ray scattering (SAXS), dynamic light scattering (DLS) and zeta potential. CMC and copolymer were assessed as scale inhibitors of calcium carbonate (CaCO3) using dynamic tube blocking tests and chemical compatibility tests, as well as scanning electron microscopy (SEM). Thermothickening behavior was observed for the 50 % CMC_50 % PNIPAM and 25 % CMC_75 % PNIPAM physical blends in aqueous solution at concentrations of 6 and 2 g/L, respectively, depending on polymer concentration and composition. For the copolymers, the increase in temperature and amount of PNIPAM favored polymer-polymer interactions through hydrophobic groups, resulting in increased turbidity of polymer solutions. Particle size decreased with the rise in copolymer PNIPAM content as a function of pH (3-12), at 25 °C. Larger amounts of CMC result in a stronger effect of pH on particle size, indicating pH-responsive behavior. Thus, 25CMC was not affected by the change in pH, exhibiting similar behavior to PNIPAM. In addition, the presence of acidic or basic additives influenced particle size, which was smaller in the presence of the additives than in distilled water. The results of zeta potential also showed greater variation for polymers in distilled water than in the presence of acids and bases. The lower critical solution temperature (LCST) of PNIPAM determined by DLS corroborated the value obtained by UV-visible spectroscopy. SAXS data for PNIPAM and 50CMC indicated phase transition when the temperature increased from 32 to 34 °C. A reduction in or absence of electrostatic properties was observed as a function of increased PNIPAM in copolymer composition. Assessment of samples as scale inhibitors showed that CMC performed better than the copolymers. This was attributed to the higher charge density present in CMC. The SEM micrographs confirmed morphological changes in the CaCO3 crystals, demonstrating the scale inhibiting potential of these polymers

Avaliação clínica de pacientes submetidos à colocação de implantes zigomáticos pela técnica de Stella & Warner

This study aimed to evaluate patients who underwent placement of zygomatic implants technique by Stella & Warner, considering the survival of conventional and zygomatic implants, sinus health and level of patient satisfaction in relation to oral rehabilitation. We evaluated 28 patients where 14 had received conventional and zygomatic implants, being rehabilitated with implant-fixed dentures (group 1) and 14 were rehabilitated only with conventional implants and implant-fixed dentures (group 2). The study had four phases, represented by radiographic evaluation of implants (stage I), clinical evaluation (stage II), assessing the health of the maxillary sinus (stage III) and a questionnaire to measure satisfaction of rehabilitation with fixed prosthesis implant Total -backed (stage IV). Group 2 underwent only stage IV, while group 1 participated in all stages. Descriptive analysis and statistics were performed, using the t test for independent samples in the evaluation of phase IV. The results demonstrated that the technique of Stella & Warner proved effective, allowing a high survival rate of conventional implants and zygomatic (100%), considering a minimum follow-up of 15 months and maximum 53 months after prosthetic rehabilitation. There were no pathological changes in tissues periimplants conventional and zygomatic implants analyzed. Radiographic findings showed satisfactory levels bone implants in the oral rehabilitation with conventional zygomatic implants and a good positioning of the apex of the zygomatic implants over the zygomatic bone. The presence of the zygomatic implant did not cause sinus and the t test showed a satisfaction index lower in group 1 compared with group 2. The zygomatic implant placement technique by Stella & Warner proved to be a predictable technique with high survival rate in patients with atrophic jaws, necessitating long-term follow-up to confirm the initial findings of the study