Sr-Nd isotopic evidence for crustal contamination in the Niquelandia complex, Goias, Central Brazil

The Niquelandia complex is a Neoproterozoic mafic-ultramafic intrusion resulting from fractional crystallization of primary picritic basalt intrusions. It consists of two layered sequences: a lower and larger one (LS), where four stratigraphic units exhibit an upward decrease of ultramafic layers and increase of gabbroic layers; an upper, smaller sequence (US), separated from LS by a high-temperature shear zone and consisting of two stratigraphic units (gabbros + anorthosites and amphibolites). Nd and Sr isotopic analyses and rare earth element (REE) profiles provide evidence that the complex suffered important crustal contamination. The LS isotopic array trends from a DM region with positive epsilon Nd and moderately positive epsilon Sr towards a field occupied by crustal xenoliths, especially abundant in the upper LS (negative epsilon Nd and large, positive E:Sr). Each LS stratigraphic unit is distinct from the next underlying unit, showing lower epsilon Nd and higher epsilon Sr, suggesting inputs of fresh magma and mixing with the contaminated, residual magma. The US is characterised by a relatively high variation of epsilon Nd and constant epsilon Sr. REE patterns vary within each unit from LREE depleted to LREE enriched in the samples having lower epsilon Nd and higher epsilon Sr. The contamination process has been modelled by using the EC-AFC algorithms from [Spera, F.J., Bohrson, W.A., 2001. Energy-constrained open-system magmatic processes 1: general model and energy-constrained assimilation and fractional crystallization (EC-AFC) formulation. J. Petrology 42, 999-1018]. The differences between the LS and US isotopic arrays are consistent with contamination by the same crustal component, provided that its melting degree was higher in LS than in US. The different degrees of anatexis are explained by the heat budget released from the magma, higher in LS (because of its larger mass) than in US. Comparison of the correlations between isotopes and incompatible trace element ratios of the models and of the gabbros shows some differences, which are demonstrably related with the variable amount of cumulus phases and trapped melt in the gabbros. (c) 2007 Elsevier Ltd. All rights reserved.

Guadalupian (Middle Permian) brachiopods from Sungai Toh, a Leptodus Shale locality in the Central Belt of Peninsular Malaysia. Part I: Lower Horizons

This work presents a systematic study of Permian Brachiopoda from the Sungai Toh Leptodus Shale locality, Pahang State, Peninsular Malaysia. This locality lies within the Central Belt of Peninsular Malaysia, a tectonic unit characterised.by tuffaceous sediments and limestones of Late Palaeozoic age. Two brachiopod-bearing horizons were studied in detail at this locality, the lower one (Horizon 2) bearing a mixed plant and invertebrate assemblage, including the brachiopods Urushtenoidea chaoi (CHING), Leptodus richthofeni KAYSER, Anidanthus cf. sinosus HUANG, Acosarina dorashamensis (SOKOLSKAJA), A. minuta (ABleH) and unidentifiable species of Linoproduetus, Neochonetes, and Strophalosiina. Horizon 3 contains a more abundant and diverse brachiopod fauna, comprising a total. of 57 species representing 47 genera, including Vediproductus punetatiformis (CHAO), Permianella typica HE & ZHU, Tranrennatia gratiosa (WAAGEN), Leptodus richthofeni KAYSER, Leptodus cf. tenuis (WAAGEN) and "Semibrachythyrina" [= Alphaneospirifer] cf. pyramidiformis LIANG. It is
suggested in this study that the age of the Sungai Toh locality is Capitanian (late Guadalupian) to possibly Wuchiapingian (early Lopingian),
as it appears to correlate well with the Lengwu fauna from Zhejiang in eastern China. The palaeobiogeographical affinities of the Sungai Toh fauna are interesting, mainly indicating strong Palaeo-equatorial affinities, while there are also some elements more typical of the cooler periGondwana
Region.

Sustainable retrofit potential in lower quality office stock in the central business district

Given the relationship between energy consumption, greenhouse gas emissions and climate change, the built environment has significant potential to lessen overall emissions. With around half of all greenhouse gas emissions attributed to the built environment; it has a significant role to play in mitigating global warming. With large percentages of office stock structurally vacant in some city centres and only 1 or 2% of new buildings added to the total stock each year; the scope for reductions lay with adaptation of existing buildings. The stock with the highest levels of vacancy and obsolescence offers the highest potential of all.

Many cities are now aiming to become carbon neutral. Successful retrofit demands that social, technological, environmental, economic and legislative criteria are addressed. Buildings have to meet user and community needs. City centres comprise a range of different type of office stock with regards to age, size, location, height, tenure and quality. All buildings present challenges and opportunities with regards to retrofit and sustainability and integrating retrofit measures that reduce energy, water and resource consumption.

Using a selection of low grade office buildings to develop retrofit profiles, this paper addresses the questions; (a) what is the nature of retrofits in relation to low quality office building stock in the Central Business District (CBD) and, (b) what is the extent and scope for sustainable retrofits to low quality office buildings. Using Melbourne CBD retrofit events of low quality office buildings were analysed between 1998 and 2008 to identify the scope and extent for integrating sustainability into retrofits projects.

Permian fusuline fauna from the lower part of the lugu formation in the central qiangtang block and its geological implications

A Kubergandian (Kungurian) fusuline fauna from the lower part of the Lugu Formation in the Cuozheqiangma area, central Qiangtang Block is described. This fusuline fauna belongs to the Southern Transitional Zone in palaeobiogeography, and is characterised by the presence of the distinctive bi-temperate genus Monodiexodina and many genera common in lower latitude Tethyan areas such as Parafusulina and Pseudodoliolina. The occurrence of Monodiexodina in the fauna confirms that the seamount-type carbonates of the Lugu Formation did not originate from the Palaeotethys Ocean, but rather from a branch of the Neotethys Ocean after the rifting of the Qiangtang Block from the Tethys Himalaya area in the Artinskian. © 2014 Geological Society of China.

Arquitetura deposicional e evolução tectono-estratigráfica das sequências pré-rifte e rifte, na porção central do Vale do Cariri, Bacia do Araripe, NE do Brasil

A complex depositional history, related to Atlantic rifting, demonstrates the geological evolution during the late Jurassic and early Neocomian periods in the Araripe Basin NE Brazil. Based on outcrop, seismic and remote sensing data, a new model of the tectono-stratigraphic evolution of the section that covers the stages Dom João, Rio da Serra and Aratu (Brejo Santo, Missão Velha and Abaiara formations) is presented in this paper. In the stratigraphic section studied, ten sedimentary facies genetically linked to nine architectural elements were described, representing depositional systems associated with fluvial, aeolian and deltaic environments. Based on the relationship between the rates of creation of accommodation space and sediment influx (A / S) it was possible to associate these depositional systems with High and Low accommodation system tracks. These system tracks represent two tectono-sequences, separated by regional unconformities. The Tectono-sequence I, which includes lithotypes from the Brejo Santo Formation and is related to the pre-rift stage, is bounded at the base by the Paleozoic unconformity. This unit represents only a High Accommodation System Track, composed by a succession of pelitic levels interbedded with sandstones and limestones, from a large fluvial floodplain origin, developed under arid climatic conditions. The Tectono-sequence II, separated from the underlying unit by an erosional unconformity, is related to the rift stage, and is composed by the Missão Velha and Abaiara Formation lithotypes. Changes in depositional style that reflect variations in the A / S ratio, and the presence of hydroplastic deformation bands, make it possible to divide this tectonosequence into two internal sequences. Sequence IIA, which includes the lower portion of the Missão Velha Formation and sequence IIB, is composed by the upper section of the Missão Velha and Abaiara Formations The Sequence IIA below, composed only by the Low Accommodation System Track, includes crossbedding sandstones interbedded with massive mudstones, which are interpreted as deposits of sandy gravel beds wandering rivers. Sequence IIB, above, is more complex, showing a basal Low Accommodation System Track and a High Accommodation System Track at the top, separated by an expansion surface. The lower System Track, related to the upper portion of the Missão Velha Formation, is composed by a series of amalgamated channels, separated by erosion surfaces, interpreted as deposits of a belt of braided channels. The High Accommodation System Track, correlated with the Abaiara Unit, is marked by a significant increase in the A / S, resulting in the progradation of a system of braided river deltas with aeolic influence. Regarding tectonic evolution, the stratigraphic study indicates that the Tectonosequence Rift in the Araripe basin was developed in two phases: first characterized by a beginning of rifting, related to Sequence IIA, followed by a phase of syndepositional deformation, represented by sequence IIB. The first phase was not influenced by the development of large faults, but was influenced by a sharp and continuous decrease of accommodation space that permitted a change in depositional patterns, establishing a new depositional architecture. In turn, the stage of syndepositional deformation allowed for the generation of enough accommodation space for the preservation of fluvial-lacustrine deposits and conditioned the progradation of a braided river-dominated delta system.

Amino acid sequence of a myotoxic Lys49-phospholipase A(2) homologue from the venom of Cerrophidion (Bothrops) godmani

The complete amino acid sequence of myotoxin II (godMT-II), a myotoxic phospholipase A( 2 )(PLA(2)) homologue from the venom of the Central American crotaline snake Cerrophidion (Bothrops) godmani, was determined by direct protein sequencing methods. GodMT-II is a class II PLA, showing a Lys instead of Asp at position 49. An additional substitution in the calcium binding loop region (Asn instead of Tyr at position 28) suggests the lack of enzymatic activity observed in this toxin is due to loss of its ability to bind the co-factor Ca2+, since the residues involved in forming the catalytic network of PLA(2)s (His-48, Tyr-52 and Asp-99) an conserved in godMT-II. This myotoxin shows highest sequence homology with other Lys-49 PLA(2)s from Bothrops, Agkistrodon and Trimeresurus species, suggesting that they constitute a conserved family of proteins, yet in contrast presents lower homology with Bothrops asper myotoxin III, a catalytically-active PLA(2). The C-terminal region of godMT-II, which is rich in cationic and hydrophobic residues, shares high sequence homology to the corresponding region in the myotoxin II from B. asper, which has been proposed to play an important role in the Ca2+-independent membrane damaging activity. (C) 1998 Elsevier B.V. B.V. All rights reserved.

Sequence features responsible for intron retention in human

Abstract Background One of the least common types of alternative splicing is the complete retention of an intron in a mature transcript. Intron retention (IR) is believed to be the result of intron, rather than exon, definition associated with failure of the recognition of weak splice sites flanking short introns. Although studies on individual retained introns have been published, few systematic surveys of large amounts of data have been conducted on the mechanisms that lead to IR. Results TTo understand how sequence features are associated with or control IR, and to produce a generalized model that could reveal previously unknown signals that regulate this type of alternative splicing, we partitioned intron retention events observed in human cDNAs into two groups based on the relative abundance of both isoforms and compared relevant features. We found that a higher frequency of IR in human is associated with individual introns that have weaker splice sites, genes with shorter intron lengths, higher expression levels and lower density of both a set of exon splicing silencers (ESSs) and the intronic splicing enhancer GGG. Both groups of retained introns presented events conserved in mouse, in which the retained introns were also short and presented weaker splice sites. Conclusion Although our results confirmed that weaker splice sites are associated with IR, they showed that this feature alone cannot explain a non-negligible fraction of events. Our analysis suggests that cis-regulatory elements are likely to play a crucial role in regulating IR and also reveals previously unknown features that seem to influence its occurrence. These results highlight the importance of considering the interplay among these features in the regulation of the relative frequency of IR.

Partial melting within the lower crust – Constraints from bulk rock geochemical data and trace element mineral analyses of granulites and migmatites from Central Finland

This PhD thesis concerns geochemical constraints on recycling and partial melting of Archean continental crust. A natural example of such processes was found in the Iisalmi area of Central Finland. The rocks from this area are Middle to Late Archean in age and experienced metamorphism and partial melting between 2.7-2.63 Ga. The work is based on extensive field work. It is furthermore founded on bulk rock geochemical data as well as in-situ analyses of minerals. All geochemical data were obtained at the Institute of Geosciences, University of Mainz using X-ray fluorescence, solution ICP-MS and laser ablation-ICP-MS for bulk rock geochemical analyses. Mineral analyses were accomplished by electron microprobe and laser ablation ICP-MS. Fluid inclusions were studied by microscope on a heating-freezing-stage at the Geoscience Center, University Göttingen. Part I focuses on the development of a new analytical method for bulk rock trace element determination by laser ablation-ICP-MS using homogeneous glasses fused from rock powder on an Iridium strip heater. This method is applicable for mafic rock samples whose melts have low viscosities and homogenize quickly at temperatures of ~1200°C. Highly viscous melts of felsic samples prevent melting and homogenization at comparable temperatures. Fusion of felsic samples can be enabled by addition of MgO to the rock powder and adjustment of melting temperature and melting duration to the rock composition. Advantages of the fusion method are low detection limits compared to XRF analyses and avoidance of wet-chemical processing and use of strong acids as in solution ICP-MS as well as smaller sample volumes compared to the other methods. Part II of the thesis uses bulk rock geochemical data and results from fluid inclusion studies for discrimination of melting processes observed in different rock types. Fluid inclusion studies demonstrate a major change in fluid composition from CO2-dominated fluids in granulites to aqueous fluids in TTG gneisses and amphibolites. Partial melts were generated in the dry, CO2-rich environment by dehydration melting reactions of amphibole which in addition to tonalitic melts produced the anhydrous mineral assemblages of granulites (grt + cpx + pl ± amph or opx + cpx + pl + amph). Trace element modeling showed that mafic granulites are residues of 10-30 % melt extraction from amphibolitic precursor rocks. The maximum degree of melting in intermediate granulites was ~10 % as inferred from modal abundances of amphibole, clinopyroxene and orthopyroxene. Carbonic inclusions are absent in upper-amphibolite facies migmatites whereas aqueous inclusion with up to 20 wt% NaCl are abundant. This suggests that melting within TTG gneisses and amphibolites took place in the presence of an aqueous fluid phase that enabled melting at the wet solidus at temperatures of 700-750°C. The strong disruption of pre-metamorphic structures in some outcrops suggests that the maximum amount of melt in TTG gneisses was ~25 vol%. The presence of leucosomes in all rock types is taken as the principle evidence for melt formation. However, mineralogical appearance as well as major and trace element composition of many leucosomes imply that leucosomes seldom represent frozen in-situ melts. They are better considered as remnants of the melt channel network, e.g. ways on which melts escaped from the system. Part III of the thesis describes how analyses of minerals from a specific rock type (granulite) can be used to determine partition coefficients between different minerals and between minerals and melt suitable for lower crustal conditions. The trace element analyses by laser ablation-ICP-MS show coherent distribution among the principal mineral phases independent of rock composition. REE contents in amphibole are about 3 times higher than REE contents in clinopyroxene from the same sample. This consistency has to be taken into consideration in models of lower crustal melting where amphibole is replaced by clinopyroxene in the course of melting. A lack of equilibrium is observed between matrix clinopyroxene / amphibole and garnet porphyroblasts which suggests a late stage growth of garnet and slow diffusion and equilibration of the REE during metamorphism. The data provide a first set of distribution coefficients of the transition metals (Sc, V, Cr, Ni) in the lower crust. In addition, analyses of ilmenite and apatite demonstrate the strong influence of accessory phases on trace element distribution. Apatite contains high amounts of REE and Sr while ilmenite incorporates about 20-30 times higher amounts of Nb and Ta than amphibole. Furthermore, trace element mineral analyses provide evidence for magmatic processes such as melt depletion, melt segregation, accumulation and fractionation as well as metasomatism having operated in this high-grade anatectic area.

Early-Holocene afforestation processes in the lower subalpine belt of the Central Swiss Alps as inferred from macrofossil and pollen records

To reconstruct the vegetation history of the Upper Engadine, continuous sediment cores covering the past 11 800 years from Lej da Champfer and Lej da San Murezzan (Upper Engadine Valley, c. 1800 m a.s.l., southeastern Switzerland) have been analysed for pollen and plant macrofossils. The chronologies of the cores are based on 16 and 22 radiocarbon dates, respectively. The palaeobotanical records of both lakes are in agreement for the Holocene, but remarkable differences exist between the sites during the period 11 100 to 10 500 cal. BP, when Lej da Champfer was affected by re-sedimentation processes. Macrofossil data suggest that Holocene afforestation began at around 11400 cal. BP. A climatic deterioration, the Preboreal Oscillation, stopped and subsequently delayed the establishment of trees until c. 11000 cal. BP, when first Betula, then Pinus sylvestrislmugo, then Larix 300 years later, and finally Pinus cembra expanded within the lake catchment. Treeline was at c. 1500 m during the Younger Dryas (12 542- 11 550 cal. BP) in the Central Alps. Our results, along with other macrofossil studies from the Alps, suggest a nearly simultaneous afforestation (e.g., by Pinus sylvestris in the lower subalpine belt) between 1500 and 2340 m a.s.l. at around 11 400 to 11 300 cal. BP. We suggest that forest-limit species (e.g., Pinus cembra, Larix decidua) could expand faster at today's treeline (c. 2350 m a.s.l.), than 550 m lower. Earlier expansions at higher altitudes probably resulted from reduced competition with low-altitude trees (e.g. Pinus sylvestris) and herbaceous species. Comparison with other proxies such as oxygen isotopes, residual A14C, glacier fluctuations, and alpine climatic cooling phases suggests climatic sensitivity of vegetation during the early Holocene.

Complete genome of a Puumala virus strain from Central Europe

Puumala virus (PUUV) is one of the predominant hantavirus species in Europe causing mild to moderate cases of haemorrhagic fever with renal syndrome. Parts of Lower Saxony in north-western Germany are endemic for PUUV infections. In this study, the complete PUUV genome sequence of a bank vole-derived tissue sample from the 2007 outbreak was determined by a combined primer-walking and RNA ligation strategy. The S, M and L genome segments were 1,828, 3,680 and 6,550 nucleotides in length, respectively. Sliding-window analyses of the nucleotide sequences of all available complete PUUV genomes indicated a non-homogenous distribution of variability with hypervariable regions located at the 3′-ends of the S and M segments. The overall similarity of the coding genome regions to the other PUUV strains ranged between 80.1 and 84.7 % at the level of the nucleotide sequence and between 89.5 and 98.1 % for the deduced amino acid sequences. In comparison to the phylogenetic trees of the complete coding sequences, trees based on partial segments revealed a general drop in phylogenetic support and a lower resolution. The Astrup strain S and M segment sequences showed the highest similarity to sequences of strains from geographically close sites in the Osnabrück Hills region. In conclusion, a primer-walking-mediated strategy resulted in the determination of the first complete nucleotide sequence of a PUUV strain from Central Europe. Different levels of variability along the genome provide the opportunity to choose regions for analyses according to the particular research question, e.g., large-scale phylogenetics or within-host evolution.