Estimation of ravine sediment production and sediment dynamics in the lower Le Sueur River watershed, Minnesota

This study focuses on quantifying explicitly the sediment budget of deeply incised ravines in the lower Le Sueur River watershed, in southern Minnesota. High-rate-gully-erosion equations along with the Universal Soil Loss Equation (USLE) were implemented in a numerical modeling approach that is based on a time-integration of the sediment balance equations. The model estimates the rates of ravine width and depth change and the amount of sediment periodically flushing from the ravines. Components of the sediment budget of the ravines were simulated with the model and results suggest that the ravine walls are the major sediment source in the ravines. A sensitivity analysis revealed that the erodibility coefficients of the gully bed and wall, the local slope angle and the Manning’s coefficient are the key parameters controlling the rate of sediment production. Recommendations to guide further monitoring efforts in the watershed and increased detail modeling approaches are highlighted as a result of this modeling effort.

Estimation of Ravine Sediment Production and Sediment Dynamics in the Lower Le Sueur River Watershed, Minnesota

This study focuses on quantifying explicitly the sediment budget of deeply incised ravines in the lower Le Sueur River watershed, in southern Minnesota. High-rate-gully-erosion equations along with the Universal Soil Loss Equation (USLE) were implemented in a numerical modeling approach that is based on a time-integration of the sediment balance equations. The model estimates the rates of ravine width and depth change and the amount of sediment periodically flushing from the ravines. Components of the sediment budget of the ravines were simulated with the model and results suggest that the ravine walls are the major sediment source in the ravines. A sensitivity analysis revealed that the erodibility coefficients of the gully bed and wall, the local slope angle and the Manning’s coefficient are the key parameters controlling the rate of sediment production. Recommendations to guide further monitoring efforts in the watershed and increased detail modeling approaches are highlighted as a result of this modeling effort.

Estimate of the (R)USLE rainfall erosivity factor from monthly precipitation data in mainland Spain

The need for continuous recording rain gauges makes it difficult to determine the rainfall erosivity factor (R-factor) of the (R)USLE model in areas without good temporal data coverage. In mainland Spain, the Nature Conservation Institute (ICONA) determined the R-factor at few selected pluviographs, so simple estimates of the R-factor are definitely of great interest. The objectives of this study were: (1) to identify a readily available estimate of the R-factor for mainland Spain; (2) to discuss the applicability of a single (global) estimate based on analysis of regional results; (3) to evaluate the effect of record length on estimate precision and accuracy; and (4) to validate an available regression model developed by ICONA. Four estimators based on monthly precipitation were computed at 74 rainfall stations throughout mainland Spain. The regression analysis conducted at a global level clearly showed that modified Fournier index (MFI) ranked first among all assessed indexes. Applicability of this preliminary global model across mainland Spain was evaluated by analyzing regression results obtained at a regional level. It was found that three contiguous regions of eastern Spain (Catalonia, Valencian Community and Murcia) could have a different rainfall erosivity pattern, so a new regression analysis was conducted by dividing mainland Spain into two areas: Eastern Spain and plateau-lowland area. A comparative analysis concluded that the bi-areal regression model based on MFI for a 10-year record length provided a simple, precise and accurate estimate of the R-factor in mainland Spain. Finally, validation of the regression model proposed by ICONA showed that R-ICONA index overpredicted the R-factor by approximately 19%.

Influência do uso e ocupação do solo na qualidade da água e no processo erosivo da bacia de captação do Rio Barro Preto, Coronel Vivida-PR

This study was developed in objecting to investigate the use and occupation of land in 1999, 2005, 2011 e 2015 and estimate soil degradation by laminar erosion and the relation with water quality in 2015 in the catchment basin of the Barro Preto river, Coronel Vivida – PR. For multitemporal analysis of use and occupation of land in the basin used in the Landsat 5, 7 and 8 images and Geographic Information System. The laminar erosion was estimated by the Universal Soil Loss Equation through the systematization of calculations of the factors that compose the equation in SPRING/INPE. The water quality of the studied river section was evaluated according to the Water Quality Idex and the Resolution CONAMA n. 357/2005. The multitemporal analysis of the use and occupation of land has demonstrated that basin is predominantly agricultural in all years studied, as well as the permanent preservation area presents it not regularized during the period in accordance with the Brazilian Forest Code in force. In relation the quantification of laminar soil erosion in the study period, the rainfall and runoff factor was estimated considering the rainfall data from 1986 to 2014 and resulted in a value of 11.573,47 MJ/ha.mm/a. The Dystrophic Red Latosol, Dystrophic Red Nitisol, Fluvisol and Leptosol soil erodibility factor were 0,0138, 0,0137, 0,0207, 0,0196 t.ha.h/ha.MJ.mm/a, respectively. The topographical factor has demonstrated that the catchment basin has the rough terrain because the moderate and moderate strong classes are dominant in the study area. The cover and management and support practice factors were estimated according to the multitemporal analysis of the use and occupation of land in the basin and the values ranged from 0,0006 to 0,0688. The soil losses by laminar erosion were simulated with agriculture areas with corn and soybeans in no-till. The soil losses with maize crop in no-till in 1999, 2005, 2011 and 2015 were 9.782,75, 10.592,71, 9.636,61 e 11.058,26 t/year, respectively, and soybeans crops in no-till were 15.140,01, 16.645,20, 14.662,14 e 17.049,85 t/year, respectively. In relation with water quality of the section studied river, the average of Water Quality Index during the season were 55,47, 53,09 and 49,72, for the first, second and third sample point, respectively. Indication a decrease in water quality since the source to the last sample point. It is concluded that the use and occupation of land in the catchment basin interferes in the water quality, as well as in soil degradation.

Comparação da eficácia de tecnologias para o controlo da perda de solo em áreas ardidas no Nordeste de Portugal aplicando modelo de erosão

As florestas exercem grande influência nos meios físico, biótico e socioeconômico, evitando a degradação do solo pela erosão, controlando a qualidade da água, fornecendo matérias-primas e alimentos, abrigando a maior parte da fauna e flora terrestre. As áreas florestais estão todavia sujeitas a significativo risco de incêndio. Como consequência dos incêndios, e entre outros impactos, o solo fica exposto à ação erosiva da chuva determinando perdas de solo muito significativas e a degradação deste recurso. Deste modo, o controle da erosão após o incêndio é essencial para a mais rápida recuperação das áreas ardidas suportada em medidas de conservação do solo eficazes. O trabalho propõe-se fazer uma avaliação quantificada da eficácia de técnicas de conservação do solo no controle da erosão em áreas ardidas, centrada em medidas de baixo custo e aplicável ao NE de Portugal, em especial o Distrito de Bragança. A metodologia de avaliação seguida inclui a construção de cenários regionais de aplicação simulada de uma seleção de medidas, mediante exploração de um modelo de erosão (Equação Universal de Perda de Solo – USLE). Através das simulações realizadas fazendo variar a distribuição de barreiras ao longo da encosta e o seu grau de retenção, foi possível avaliar a eficácia desta técnica para a redução da erosão nas condições definidas como cenários de base. Observou-se que o grau de retenção tem maior influência na redução de perda do solo do que a distância entre barreiras. Isto evidencia a necessidade de uma implementação adequada desta medida, com a instalação de barreiras de elevado grau de retenção. Aplicada apenas no primeiro ano pós-fogo, e de forma isolada, a técnica da sementeira não se mostrou suficientemente eficaz. Porém, se após um ano se realizar uma nova sementeira na área afetada, mostrou-se que pode ocorrer uma diminuição dos valores de perda de solo relativamente grande, pelo que será aconselhável a realização de uma ressementeira no ano seguinte à primeira aquando de intervenções pós-fogo com esta técnica. Uma possível combinação entre os métodos anteriores iria proporcionar uma situação ótima, como observado nos resultados das simulações efetuadas, onde a maioria dos cenários apresentou valores estimados de perda de solo menores ou iguais a 2 ton/ha.ano, limiar que separa condições de risco de erosão baixo e moderado e corresponde à tolerância de perda de solo para solos delgados e de substrato não renovável.

MODELAJE DE LA EROSIÓN DE SUELOS EN COSTA RICA MEDIANTE EL MODELO WEPP

El objetivo de esta investigación consiste básicamente en probar la aplicabilidad para las condiciones físico-geográficas características de Costa Rica, del modelo para la predicción de suelos Watcr Erosion Prediction Project (WEPP), el cual es desarrollado por el Servicio de Conservación de Suelos de los Estados Unidos.Los pronósticos efectuados por el WEPP, son comparados con mediciones reales de erosión y escorrentía efectuadas por medio de parcelas tipo USLE (café, pastos y tabaco-maíz-frijol) ubicadas en la localidad de Cerbatana de Puriscal (1990-1995), junto con mediciones de las condiciones climáticas y análisis de las características de los suelos.Los resultados indican que ci modelo tiene un aceptable pronóstico en los datos de la erosión y de la escorrentía, sobre todo si se le compara con pronósticos hechos con la Ecuación Universal de Pérdida de Suelos. Los parámetros de entrada (input) que requiere el WEPP son muy abundantes en cantidad y muy sensibles en su efecto sobre los pronósticos, por lo tanto el uso y la interpretación de los resultados deben efectuarse con un enfoque muy crítico.Abstract: the objective of this invcstigation basically consists of testing the suitabiiity of the model Water Erosion Prediction Project (WEPP) to predict soil erosion given the physical geographical charactcristics of Costa Rica. The model was developed by the Soil Conservation Service of the United States.Thc effectted predictions of the WEPP are compared with real soil erosion and surface runoff measurements taken at a typical USLE site (coffee, pasture and tobacco-corn-bean), located in the surroundings of Cerbatana of Puriscal (1990-1995). This data was taken in conjuntion with measurements of ciimactic conditions and analysis of soil characteristics.The results indicate that the model has an acceptable ability to predict soil erosion and surface runoff data, particularly if one compares thern with predictions made with the Universal Soil Loss Equation. Thc input variables that are rcquired by WEPP are quite abundant in quantity and are very sensitive in their effect of the predictions made. For that reason, the uses and interpretation of the results should be put into use with a very critical eye.

The adaptive metabolic response to exercise-induced weight loss influences both energy expenditure and energy intake

BACKGROUND/OBJECTIVEs A decline in resting energy expenditure (REE) beyond that predicted from changes in body composition has been noted following dietary-induced weight loss. However, it is unknown whether a compensatory downregulation in REE also accompanies exercise (EX)-induced weight loss, or whether this adaptive metabolic response influences energy intake (EI). SUBJECTS/METHODS Thirty overweight and obese women (body mass index (BMI)=30.6±3.6 kg/m2) completed 12 weeks of supervised aerobic EX. Body composition, metabolism, EI and metabolic-related hormones were measured at baseline, week 6 and post intervention. The metabolic adaptation (MA), that is, difference between predicted and measured REE was also calculated post intervention (MApost), with REE predicted using a regression equation generated in an independent sample of 66 overweight and obese women (BMI=31.0±3.9 kg/m2). RESULTS Although mean predicted and measured REE did not differ post intervention, 43% of participants experienced a greater-than-expected decline in REE (−102.9±77.5 kcal per day). MApost was associated with the change in leptin (r=0.47; P=0.04), and the change in resting fat (r=0.52; P=0.01) and carbohydrate oxidation (r=−0.44; P=0.02). Furthermore, MApost was also associated with the change in EI following EX (r=−0.44; P=0.01). CONCLUSIONS Marked variability existed in the adaptive metabolic response to EX. Importantly, those who experienced a downregulation in REE also experienced an upregulation in EI, indicating that the adaptive metabolic response to EX influences both physiological and behavioural components of energy balance.

Transmission loss analysis of rectangular expansion chamber with arbitrary location of inlet/outlet by means of Green's functions

Transmission loss of a rectangular expansion chamber, the inlet and outlet of which are situated at arbitrary locations of the chamber, i.e., the side wall or the face of the chamber, are analyzed here based on the Green's function of a rectangular cavity with homogeneous boundary conditions. The rectangular chamber Green's function is expressed in terms of a finite number of rigid rectangular cavity mode shapes. The inlet and outlet ports are modeled as uniform velocity pistons. If the size of the piston is small compared to wavelength, then the plane wave excitation is a valid assumption. The velocity potential inside the chamber is expressed by superimposing the velocity potentials of two different configurations. The first configuration is a piston source at the inlet port and a rigid termination at the outlet, and the second one is a piston at the outlet with a rigid termination at the inlet. Pressure inside the chamber is derived from velocity potentials using linear momentum equation. The average pressure acting on the pistons at the inlet and outlet locations is estimated by integrating the acoustic pressure over the piston area in the two constituent configurations. The transfer matrix is derived from the average pressure values and thence the transmission loss is calculated. The results are verified against those in the literature where use has been made of modal expansions and also numerical models (FEM fluid). The transfer matrix formulation for yielding wall rectangular chambers has been derived incorporating the structural–acoustic coupling. Parametric studies are conducted for different inlet and outlet configurations, and the various phenomena occurring in the TL curves that cannot be explained by the classical plane wave theory, are discussed.

Electron energy equation for an atomic radiating plasma

The electron-energy equation for an atomic radiating plasma is considered in this work. Using the atomic model of Bates, Kingston and McWhirter, the radiation loss-term valid for all optical thicknesses is obtained. A study of the energy gained by electrons in inelastic collisions shows that the radiation loss term can be neglected only for rapidly-decaying or fast-growing plasmas. Emission from optically thin plasmas is considered next and an exact expression is given for the total radiation loss in a recombination continuum. A derivation of the Kramers-Unsöld approximation is presented and the error involved in estimating the total emitted recombination radiation by this approximation is shown to be small.

Modified Simplified Rate Equation Model of Flowing Chemical Oxygen-Iodine Laser and its Application

A modified simplified rate equation (RE) model of flowing chemical oxygen-iodine laser (COIL), which is adapted to both the condition of homogeneous broadening and inhomogeneous broadening being of importance and the condition of inhomogeneous broadening being predominant, is presented for performance analyses of a COIL. By using the Voigt profile function and the gain-equal-loss approximation, a gain expression has been deduced from the rate equations of upper and lower level laser species. This gain expression is adapted to the conditions of very low gas pressure up to quite high pressure and can deal with the condition of lasing frequency being not equal to the central one of spectral profile. The expressions of output power and extraction efficiency in a flowing COIL can be obtained by solving the coupling equations of the deduced gain expression and the energy equation which expresses the complete transformation of the energy stored in singlet delta state oxygen into laser energy. By using these expressions, the RotoCOIL experiment is simulated, and obtained results agree well with experiment data. Effects of various adjustable parameters on the performances of COIL are also presented.

Modified Simplified Rate Equation Model of Flowing Chemical Oxygen-Iodine Laser and its Application

A modified simplified rate equation (RE) model of flowing chemical oxygen-iodine laser (COIL), which is adapted to both the condition of homogeneous broadening and inhomogeneous broadening being of importance and the condition of inhomogeneous broadening being predominant, is presented for performance analyses of a COIL. By using the Voigt profile function and the gain-equal-loss approximation, a gain expression has been deduced from the rate equations of upper and lower level laser species. This gain expression is adapted to the conditions of very low gas pressure up to quite high pressure and can deal with the condition of lasing frequency being not equal to the central one of spectral profile. The expressions of output power and extraction efficiency in a flowing COIL can be obtained by solving the coupling equations of the deduced gain expression and the energy equation which expresses the complete transformation of the energy stored in singlet delta state oxygen into laser energy. By using these expressions, the RotoCOIL experiment is simulated, and obtained results agree well with experiment data. Effects of various adjustable parameters on the performances of COIL are also presented.

Exogenous-Loss Awareness in Queue Management: Toward Global Fairness

For a given TCP flow, exogenous losses are those occurring on links other than the flow's bottleneck link. Exogenous losses are typically viewed as introducing undesirable "noise" into TCP's feedback control loop, leading to inefficient network utilization and potentially severe global unfairness. This has prompted much research on mechanisms for hiding such losses from end-points. In this paper, we show through analysis and simulations that low levels of exogenous losses are surprisingly beneficial in that they improve stability and convergence, without sacrificing efficiency. Based on this, we argue that exogenous loss awareness should be taken into account in any AQM design that aims to achieve global fairness. To that end, we propose an exogenous-loss aware Queue Management (XQM) that actively accounts for and leverages exogenous losses. We use an equation based approach to derive the quiescent loss rate for a connection based on the connection's profile and its global fair share. In contrast to other queue management techniques, XQM ensures that a connection sees its quiescent loss rate, not only by complementing already existing exogenous losses, but also by actively hiding exogenous losses, if necessary, to achieve global fairness. We establish the advantages of exogenous-loss awareness using extensive simulations in which, we contrast the performance of XQM to that of a host of traditional exogenous-loss unaware AQM techniques.

Missing data in randomized clinical trials for weight loss: scope of the problem, state of the field, and performance of statistical methods.

BACKGROUND: Dropouts and missing data are nearly-ubiquitous in obesity randomized controlled trails, threatening validity and generalizability of conclusions. Herein, we meta-analytically evaluate the extent of missing data, the frequency with which various analytic methods are employed to accommodate dropouts, and the performance of multiple statistical methods. METHODOLOGY/PRINCIPAL FINDINGS: We searched PubMed and Cochrane databases (2000-2006) for articles published in English and manually searched bibliographic references. Articles of pharmaceutical randomized controlled trials with weight loss or weight gain prevention as major endpoints were included. Two authors independently reviewed each publication for inclusion. 121 articles met the inclusion criteria. Two authors independently extracted treatment, sample size, drop-out rates, study duration, and statistical method used to handle missing data from all articles and resolved disagreements by consensus. In the meta-analysis, drop-out rates were substantial with the survival (non-dropout) rates being approximated by an exponential decay curve (e(-lambdat)) where lambda was estimated to be .0088 (95% bootstrap confidence interval: .0076 to .0100) and t represents time in weeks. The estimated drop-out rate at 1 year was 37%. Most studies used last observation carried forward as the primary analytic method to handle missing data. We also obtained 12 raw obesity randomized controlled trial datasets for empirical analyses. Analyses of raw randomized controlled trial data suggested that both mixed models and multiple imputation performed well, but that multiple imputation may be more robust when missing data are extensive. CONCLUSION/SIGNIFICANCE: Our analysis offers an equation for predictions of dropout rates useful for future study planning. Our raw data analyses suggests that multiple imputation is better than other methods for handling missing data in obesity randomized controlled trials, followed closely by mixed models. We suggest these methods supplant last observation carried forward as the primary method of analysis.

Kinetic studies of water uptake and loss in glass-ionomer cements

The water sorption and desorption behaviour of three commercial glass-ionomer cements used in clinical dentistry have been studied in detail. Cured specimens of each material were found to show slight but variable water uptake in high humidity conditions, but steady loss in desiccating ones. This water loss was found to follow Fick's law for the first 4-5 h. Diffusion coefficients at 22 degrees C were: Chemflex 1.34 x 10(-6) cm(2) s(-1), Fuji IX 5.87 x 10(-7) cm(2) s(-1), Aquacem 3.08 x 10(-6) cm(2) s(-1). At 7 degrees C they were: Chemflex 8.90 x 10(-7) cm(2) s(-1), Fuji IX 5.04 x 10(-7) cm(2) s(-1), Aquacem 2.88 x 10(-6) cm(2) s(-1). Activation energies for water loss were determined from the Arrhenius equation and were found to be Chemflex 161.8 J mol(-1), Fuji IX 101.3 J mol(-1), Aquacem 47.1 J mol(-1). Such low values show that water transport requires less energy in these cements than in resin-modified glass-ionomers. Fick's law plots were found not to pass through the origin. This implies that, in each case, there is a small water loss that does not involve diffusion. This was concluded to be water at the surface of the specimens, and was termed "superficial water". As such, it represents a fraction of the previously identified unbound (loose) water. Superficial water levels were: Chemflex 0.56%, Fuji IX 0.23%, Aquacem 0.87%. Equilibrium mass loss values were shown to be unaffected by temperature, and allowed ratios of bound:unbound water to be determined for all three cements. These showed wide variation, ranging from 1:5.26 for Chemflex to 1:1.25 for Fuji IX.

Difference equation approach to two-thermocouple sensor characterisation in constant velocity flow environments

Thermocouples are one of the most popular devices for temperature measurement due to their robustness, ease of manufacture and installation, and low cost. However, when used in certain harsh environments, for example, in combustion systems and engine exhausts, large wire diameters are required, and consequently the measurement bandwidth is reduced. This article discusses a software compensation technique to address the loss of high frequency fluctuations based on measurements from two thermocouples. In particular, a difference equation sDEd approach is proposed and compared with existing methods both in simulation and on experimental test rig data with constant flow velocity. It is found that the DE algorithm, combined with the use of generalized total least squares for parameter identification, provides better performance in terms of time constant estimation without any a priori assumption on the time constant ratios of the thermocouples.