A Capability Maturity Model to Assess Supply Chain Performance

In an overcapacity world, where the customers can choose from many similar products to satisfy their needs, enterprises are looking for new approaches and tools that can help them not only to maintain, but also to increase their competitive edge. Innovation, flexibility, quality, and service excellence are required to, at the very least, survive the on-going transition that industry is experiencing from mass production to mass customization. In order to help these enterprises, this research develops a Supply Chain Capability Maturity Model named S(CM)2. The Supply Chain Capability Maturity Model is intended to model, analyze, and improve the supply chain management operations of an enterprise. The Supply Chain Capability Maturity Model provides a clear roadmap for enterprise improvement, covering multiple views and abstraction levels of the supply chain, and provides tools to aid the firm in making improvements. The principal research tool applied is the Delphi method, which systematically gathered the knowledge and experience of eighty eight experts in Mexico. The model is validated using a case study and interviews with experts in supply chain management. The resulting contribution is a holistic model of the supply chain integrating multiple perspectives, and providing a systematic procedure for the improvement of a company’s supply chain operations.

Product and Process Innovation: Antecedents and Performance outcomes in small IT firms in India

Innovation is a strategic necessity for the survival of today’s organizations. The wide recognition of innovation as a competitive necessity, particularly in dynamic market environments, makes it an evergreen domain for research. This dissertation deals with innovation in small Information Technology (IT) firms in India. The IT industry in India has been a phenomenal success story of the last three decades, and is today facing a crucial phase in its history characterized by the need for fundamental changes in strategies, driven by innovation. This study, while motivated by the dynamics of changing times, importantly addresses the research gap on small firm innovation in Indian IT.This study addresses three main objectives: (a) drivers of innovation in small IT firms in India (b) impact of innovation on firm performance (c) variation in the extent of innovation adoption in small firms. Product and process innovation were identified as the two most contextually relevant types of innovation for small IT firms. The antecedents of innovation were identified as Intellectual Capital, Creative Capability, Top Management Support, Organization Learning Capability, Customer Involvement, External Networking and Employee Involvement.Survey method was adopted for data collection and the study unit was the firm. Surveys were conducted in 2014 across five South Indian cities. Small firm was defined as one with 10-499 employees. Responses from 205 firms were chosen for analysis. Rigorous statistical analysis was done to generate meaningful insights. The set of drivers of product innovation (Intellectual Capital, Creative Capability, Top Management Support, Customer Involvement, External Networking, and Employee Involvement)were different from that of process innovation (Creative Capability, Organization Learning Capability, External Networking, and Employee Involvement). Both product and process innovation had strong impact on firm performance. It was found that firms that adopted a combination of product innovation and process innovation had the highest levels of firm performance. Product innovation and process innovation fully mediated the relationship between all the seven antecedents and firm performance The results of this study have several important theoretical and practical implications. To the best of the researcher’s knowledge, this is the first time that an empirical study of firm level innovation of this kind has been undertaken in India. A measurement model for product and process innovation was developed, and the drivers of innovation were established statistically. Customer Involvement, External Networking and Employee Involvement are elements of Open Innovation, and all three had strong association with product innovation, and the latter twohad strong association with process innovation. The results showed that proclivity for Open Innovation is healthy in the Indian context. Practical implications have been outlined along how firms can organize themselves for innovation, the human talent for innovation, the right culture for innovation and for open innovation. While some specific examples of possible future studies have been recommended, the researcher believes that the study provides numerous opportunities to further this line of enquiry.

Capability Matrix for Open Data

Part 14: Interoperability and Integration

System Thinking to Understand Networked Innovation

Part 9: Innovation Networks

Innovation diffusion in the portuguese and italian clothing industry

Doutoramento em Economia

Innovation and entrepreneurship in scientific research

This research wants to lay emphasis on topics that historicize and rescue concepts, in addition, shows the relation between innovation and socioeconomic development resulted; reviews the legal framework to stimulate new innovation into Brazilian society; considers the definition and the entrepreneur university's new paradigm; and finally, this research highlights the importance of teaching entrepreneur at universities, with straight society benefits. The results suggests that innovation is directly enrolled with a successful development of certain society, as well, is actually the biggest business competitive differential into corporative universe. In one way of getting results of social advancement to inform entrepreneur research practice, it appears that entrepreneurs concepts, necessarily, must be incorporated into the array of Science/Technology/Innovation for the effective development of supported formula. This article develops a thought about actual scientific researches paradigm, the way that is built on today, and if it's sufficient to effectively get the results that society expects from main bodies to create human resource and researches, especially those with innovation aspects, at Brazilian economic improvement.

Influence of the technological innovation degree on knowledge creation: Evidence from a Brazilian firm

The aim of this paper is to analyze the process of knowledge creation when developing high technology products in projects having various innovation degrees. The main contribution to the literature is the systematization of an approach to analyze knowledge creation during the product innovation process. Three innovation projects developed by a company specialized in industrial automation systems were investigated using case studies. The knowledge creation processes, which took place in these three projects, were analyzed comparatively. As a distinctive result of this paper, the main features of the knowledge creation processes influenced by a degree of technological innovation are identified.

Innovation concept for measurement gross error detection and identification in power system state estimation

In this study, the innovation approach is used to estimate the measurement total error associated with power system state estimation. This is required because the power system equations are very much correlated with each other and as a consequence part of the measurements errors is masked. For that purpose an index, innovation index (II), which provides the quantity of new information a measurement contains is proposed. A critical measurement is the limit case of a measurement with low II, it has a zero II index and its error is totally masked. In other words, that measurement does not bring any innovation for the gross error test. Using the II of a measurement, the masked gross error by the state estimation is recovered; then the total gross error of that measurement is composed. Instead of the classical normalised measurement residual amplitude, the corresponding normalised composed measurement residual amplitude is used in the gross error detection and identification test, but with m degrees of freedom. The gross error processing turns out to be very simple to implement, requiring only few adaptations to the existing state estimation software. The IEEE-14 bus system is used to validate the proposed gross error detection and identification test.

Roadmapping for technology push and partnership: A contribution for open innovation environments

There are several tools in the literature that support innovation in organizations. Some of the most cited are the so-called technology roadmapping methods, also known as TRM. However, these methods are designed primarily for organizations that adopt the market pull strategy of technology-product integration. Organizations that adopt the technology push integration strategy are neglected in the literature. Furthermore, with the advent of open innovation, it is possible to note the need to consider the adoption of partnerships in the innovation process. Thus, this study proposes a method of technology roadmapping, identified as method for technology push (MTP), applicable to organizations that adopt the technology push integration strategy, such as SMEs and independent research centers in an open-innovation environment. The method was developed through action-research and was assessed from two analytical standpoints: externally, via a specific literature review on its theoretical contributions, and internally, through the analysis of potential users` perceptions on the feasibility of applying MTP. The results indicate both the unique character of the method and its perceived implementation feasibility. Future research is suggested in order to validate the method in different types of organizations (C) 2011 Elsevier Ltd. All rights reserved.

Improving the tracking capability of adaptive filters via convex combination

As is well known, Hessian-based adaptive filters (such as the recursive-least squares algorithm (RLS) for supervised adaptive filtering, or the Shalvi-Weinstein algorithm (SWA) for blind equalization) converge much faster than gradient-based algorithms [such as the least-mean-squares algorithm (LMS) or the constant-modulus algorithm (CMA)]. However, when the problem is tracking a time-variant filter, the issue is not so clear-cut: there are environments for which each family presents better performance. Given this, we propose the use of a convex combination of algorithms of different families to obtain an algorithm with superior tracking capability. We show the potential of this combination and provide a unified theoretical model for the steady-state excess mean-square error for convex combinations of gradient- and Hessian-based algorithms, assuming a random-walk model for the parameter variations. The proposed model is valid for algorithms of the same or different families, and for supervised (LMS and RLS) or blind (CMA and SWA) algorithms.

Conceptual Design of Monocolumn Production and Storage With Dry Tree Capability

A new concept and a preliminary study for a monocolumn floating unit are introduced, aimed at exploring and producing oil in ultradeep waters. This platform, which combines two relevant features-great oil storage capacity and dry tree production capability-comprises two bodies with relatively independent heave motions between them. A parametric model is used to define the main design characteristics of the floating units. A set of design alternatives is generated using this procedure. These solutions are evaluated in terms of stability requirements and dynamic response. A mathematical model is developed to estimate the first order heave and pitch motions of the platform. Experimental tests are carried out in order to calibrate this model. The response of each body alone is estimated numerically using the WAMIT (R) code. This paper also includes a preliminary study on the platform mooring system and appendages. The study of the heave plates presents the gain, in terms of decreasing the motions, achieved by the introduction of the appropriate appendages to the platform. [DOI: 10.1115/1.4001429]

Process Capability Indexes Determination on Tabletting Performance during the Process Validation for Metamizol Tablets

The aim of the present study was to provide a numerical measure, through the process capability indexes (PCIs), C(p) and C(pk), on whether or not the manufacturing process can be considered capable of producing metamizol (500 mg) tablets. They were also used as statistical tool in order to prove the consistency of the tabletting process, making sure that the tablet weight and the content uniformity of metamizol are able to comply with the preset requirements. Besides that, the ANOVA, the t-test and the test for equal variances were applied to this study, allowing additional knowledge of the tabletting phase. Therefore, the proposed statistical approach intended to assure more safety, precision and accuracy on the process validation analysis.

Innovation as a Meta-Attribute for Graduate Engineers

This paper reviews the attitudes, skills and knowledge that engineering innovators should possess. It critically analyses and compares sets of graduate attributes from the USA, Australia and Malaysia in terms of which of these relate to the ability to innovate. Innovation can be described as an integrative, meta attribute that overarches most of the other graduate attributes. Due to the “graduate attribute paradox”, it is shown how meeting the stated attributes of graduates by industry does not necessarily satisfy the requirements of industry. It is argued that the culture of the engineering school is an important influence on fostering innovation in engineers.