Robust functional estimation and fault diagnosis for complex uncertain systems

System monitoring and fault diagnosis capabilities are the most important aspects in improving safety and reliability of automatic control systems. This research proposed new methodologies on fault diagnosis and estimation for complex uncertain systems. As a result of this research, complex industrial plants can now be more effectively controlled.

Designing optimal fault tolerant Jacobian for robotic manipulators

Fault tolerance of robotic manipulators is determined based on the fault tolerance measures. In this study a Jacobian of a 7DOF optimal fault tolerant manipulator is designed based on optimality of worse case relative manipulability and worse case dexterity from geometric perspective instead of numerical solution of constrained optimisation problem or construction of optimal Jacobean through a desired null space. The proposed Jacobean matrix is optimal and equally fault tolerant for a single joint failure within any joint of the manipulators.

Minimum reconfiguration for fault tolerant manipulators

When a robotic manipulator is fault tolerant it is beneficial to study the configurations which tolerate non-catastrophic locked joint failures with a minimum relative change for the joint velocities. This problem is addressed using the properties of the condition number of the Jacobian matrix. The relationship between the faults within the joints of the manipulators and the condition number of the Jacobean matrix is used to introduce the optimal configurations for fault recovery. These optimum configurations require a minimum reconfiguration for fault tolerance of robotics manipulators. Then these configurations are studied for a 4-DOF planar manipulator to validate the proposed framework.

Fault-tolerant scheduling with dynamic number of replicas in heterogeneous systems

In the existing studies on fault-tolerant scheduling, the active replication schema makes use of ε + 1 replicas for each task to tolerate ε failures. However, in this paper, we show that it does not always lead to a higher reliability with more replicas. Besides, the more replicas implies more resource consumption and higher economic cost. To address this problem, with the target to satisfy the user’s reliability requirement with minimum resources, this paper proposes a new fault tolerant scheduling algorithm: MaxRe. In the algorithm, we incorporate the reliability analysis into the active replication schema and the theoretical analysis and experiments prove that the MaxRe algorithm’s schedule can certainly satisfy user’s reliability requirements. And the MaxRe scheduling algorithm can achieve the corresponding reliability with at most 70% fewer resources than the FTSA algorithm.

A class of optimal fault tolerant Jacobian for minimal redundant manipulators based on symmetric geometries

Design of locally optimal fault tolerant manipulators has been recently addressed via using the constraints of the desired null space for the Jacobian matrix of the manipulators. In the present paper the Jacobian matrices for optimal fault tolerance are presented based on geometric properties of column vectors instead of the null space. They are equally fault tolerant to a single joint failure from the worst-case relative manipulability and worst-case dexterity points of view. The optimality is achieved through a symmetric distribution of points on spheres.

Optimal fault tolerant Jacobian matrix generators for redundant manipulators

The design of locally optimal fault-tolerant manipulators has been previously addressed via adding constraints on the bases of a desired null space to the design constraints of the manipulators. Then by algebraic or numeric solution of the design equations, the optimal Jacobian matrix is obtained. In this study, an optimal fault-tolerant Jacobian matrix generator is introduced from geometric properties instead of the null space properties. The proposed generator provides equally fault-tolerant Jacobian matrices in R3 that are optimally fault tolerant for one or two locked joint failures. It is shown that the proposed optimal Jacobian matrices are directly obtained via regular pyramids. The geometric approach and zonotopes are used as a novel tool for determining relative manipulability in the context of fault-tolerant robotics and for bringing geometric insight into the design of optimal fault-tolerant manipulators.

Well-conditioned configurations of fault-tolerant manipulators

Fault-tolerant motion of redundant manipulators can be obtained by joint velocity reconfiguration. For fault-tolerant manipulators, it is beneficial to determine the configurations that can tolerate the locked-joint failures with a minimum relative joint velocity jump, because the manipulator can rapidly reconfigure itself to tolerate the fault. This paper uses the properties of the condition numbers to introduce those optimal configurations for serial manipulators. The relationship between the manipulator's locked-joint failures and the condition number of the Jacobian matrix is indicated by using a matrix perturbation methodology. Then, it is observed that the condition number provides an upper bound of the required relative joint velocity change for recovering the faults which leads to define the optimal fault-tolerant configuration from the minimization of the condition number. The optimization problem to obtain the minimum condition number is converted to three standard Eigen value optimization problems. A solution is for selected optimization problem is presented. Finally, in order to obtain the optimal fault-tolerant configuration, the proposed method is applied to a 4-DoF planar manipulator.

FESTAL: fault-tolerant elastic scheduling algorithm for real-time tasks in virtualized clouds

As clouds have been deployed widely in various fields, the reliability and availability of clouds become the major concern of cloud service providers and users. Thereby, fault tolerance in clouds receives a great deal of attention in both industry and academia, especially for real-time applications due to their safety critical nature. Large amounts of researches have been conducted to realize fault tolerance in distributed systems, among which fault-tolerant scheduling plays a significant role. However, few researches on the fault-tolerant scheduling study the virtualization and the elasticity, two key features of clouds, sufficiently. To address this issue, this paper presents a fault-tolerant mechanism which extends the primary-backup model to incorporate the features of clouds. Meanwhile, for the first time, we propose an elastic resource provisioning mechanism in the fault-tolerant context to improve the resource utilization. On the basis of the fault-tolerant mechanism and the elastic resource provisioning mechanism, we design novel fault-tolerant elastic scheduling algorithms for real-time tasks in clouds named FESTAL, aiming at achieving both fault tolerance and high resource utilization in clouds. Extensive experiments injecting with random synthetic workloads as well as the workload from the latest version of the Google cloud tracelogs are conducted by CloudSim to compare FESTAL with three baseline algorithms, i.e., Non-M igration-FESTAL (NMFESTAL), Non-Overlapping-FESTAL (NOFESTAL), and Elastic First Fit (EFF). The experimental results demonstrate that FESTAL is able to effectively enhance the performance of virtualized clouds.

Design di un sistema di fault detection per un'architettura fail-safe di attuazione delle superfici di controllo di un UAV

In questo lavoro di tesi si affronta una delle problematiche che si presentano oggi nell'impiego degli APR (Aeromobili a Pilotaggio Remoto): la gestione della safety. Non si può più, in altri termini, negare che tali oggetti siano parte integrante dello spazio aereo civile. Proprio su questo tema recentemente gli enti regolatori dello spazio aereo stanno proiettando i loro sforzi al fine di stabilire una serie di regolamenti che disciplinino da una parte le modalità con cui questi oggetti si interfacciano con le altre categorie di velivoli e dall'altra i criteri di idoneità perché anche essi possano operare nello spazio aereo in maniera sicura. Si rende quindi necessario, in tal senso, dotare essi stessi di un sufficiente grado di sicurezza che permetta di evitare eventi disastrosi nel momento in cui si presenta un guasto nel sistema; è questa la definizione di un sistema fail-safe. Lo studio e lo sviluppo di questa tipologia di sistemi può aiutare il costruttore a superare la barriera oggi rappresentata dal regolamento che spesso e volentieri rappresenta l'unico ostacolo non fisico per la categoria dei velivoli unmanned tra la terra e il cielo. D'altro canto, al fine di garantire a chi opera a distanza su questi oggetti di avere, per tutta la durata della missione, la chiara percezione dello stato di funzionamento attuale del sistema e di come esso può (o potrebbe) interagire con l'ambiente che lo circonda (situational awarness), è necessario dotare il velivolo di apparecchiature che permettano di poter rilevare, all'occorrenza, il malfunzionamento: è questo il caso dei sistemi di fault detection. Questi due fondamentali aspetti sono la base fondante del presente lavoro che verte sul design di un ridotto ma preponderante sottosistema dell'UAV: il sistema di attuazione delle superfici di controllo. Esse sono, infatti, l'unico mezzo disponibile all'operatore per governare il mezzo nelle normali condizioni di funzionamento ma anche l'ultima possibilità per tentare di evitare l'evento disastroso nel caso altri sottosistemi siano chiaramente fuori dalle condizioni di normale funzionamento dell'oggetto.

Fault tolerant embedded systems design by multi-objective optimization

The design of fault tolerant systems is gaining importance in large domains of embedded applications where design constrains are as important as reliability. New software techniques, based on selective application of redundancy, have shown remarkable fault coverage with reduced costs and overheads. However, the large number of different solutions provided by these techniques, and the costly process to assess their reliability, make the design space exploration a very difficult and time-consuming task. This paper proposes the integration of a multi-objective optimization tool with a software hardening environment to perform an automatic design space exploration in the search for the best trade-offs between reliability, cost, and performance. The first tool is commanded by a genetic algorithm which can simultaneously fulfill many design goals thanks to the use of the NSGA-II multi-objective algorithm. The second is a compiler-based infrastructure that automatically produces selective protected (hardened) versions of the software and generates accurate overhead reports and fault coverage estimations. The advantages of our proposal are illustrated by means of a complex and detailed case study involving a typical embedded application, the AES (Advanced Encryption Standard).

Flexible fault-tolerant topology for switched reluctance motor drives

Switched reluctance motor (SRM) drives are one competitive technology for traction motor drives. This paper proposes a novel and flexible SRM fault-tolerant topology with fault diagnosis, fault tolerance, and advanced control functions. The converter is composed of a single-phase bridge and a relay network, based on the traditional asymmetrical half-bridge driving topology. When the SRM-driving system is subjected to fault conditions including open-circuit and short-circuit faults, the proposed converter starts its fault-diagnosis procedure to locate the fault. Based on the relay network, the faulty part can be bypassed by the single-phase bridge arm, while the single-phase bridge arm and the healthy part of the converter can form a fault-tolerant topology to sustain the driving operation. A fault-tolerant control strategy is developed to decrease the influence of the fault. Furthermore, the proposed fault-tolerant strategy can be applied to three-phase 12/8 SRM and four-phase 8/6 SRM. Simulation results in MATLAB/Simulink and experiments on a three-phase 12/8 SRM and a four-phase 8/6 SRM validate the effectiveness of the proposed strategy, which may have significant economic implications in traction drive systems.

Adaptive fault-tolerant teleoperation

While the robots gradually become a part of our daily lives, they already play vital roles in many critical operations. Some of these critical tasks include surgeries, battlefield operations, and tasks that take place in hazardous environments or distant locations such as space missions. ^ In most of these tasks, remotely controlled robots are used instead of autonomous robots. This special area of robotics is called teleoperation. Teleoperation systems must be reliable when used in critical tasks; hence, all of the subsystems must be dependable even under a subsystem or communication line failure. ^ These systems are categorized as unilateral or bilateral teleoperation. A special type of bilateral teleoperation is described as force-reflecting teleoperation, which is further investigated as limited- and unlimited-workspace teleoperation. ^ Teleoperation systems configured in this study are tested both in numerical simulations and experiments. A new method, Virtual Rapid Robot Prototyping, is introduced to create system models rapidly and accurately. This method is then extended to configure experimental setups with actual master systems working with system models of the slave robots accompanied with virtual reality screens as well as the actual slaves. Fault-tolerant design and modeling of the master and slave systems are also addressed at different levels to prevent subsystem failure. ^ Teleoperation controllers are designed to compensate for instabilities due to communication time delays. Modifications to the existing controllers are proposed to configure a controller that is reliable in communication line failures. Position/force controllers are also introduced for master and/or slave robots. Later, controller architecture changes are discussed in order to make these controllers dependable even in systems experiencing communication problems. ^ The customary and proposed controllers for teleoperation systems are tested in numerical simulations on single- and multi-DOF teleoperation systems. Experimental studies are then conducted on seven different systems that included limited- and unlimited-workspace teleoperation to verify and improve simulation studies. ^ Experiments of the proposed controllers were successful relative to the customary controllers. Overall, by employing the fault-tolerance features and the proposed controllers, a more reliable teleoperation system is possible to design and configure which allows these systems to be used in a wider range of critical missions. ^

Adaptive Fault-Tolerant Teleoperation

While the robots gradually become a part of our daily lives, they already play vital roles in many critical operations. Some of these critical tasks include surgeries, battlefield operations, and tasks that take place in hazardous environments or distant locations such as space missions. In most of these tasks, remotely controlled robots are used instead of autonomous robots. This special area of robotics is called teleoperation. Teleoperation systems must be reliable when used in critical tasks; hence, all of the subsystems must be dependable even under a subsystem or communication line failure. These systems are categorized as unilateral or bilateral teleoperation. A special type of bilateral teleoperation is described as force-reflecting teleoperation, which is further investigated as limited- and unlimited-workspace teleoperation. Teleoperation systems configured in this study are tested both in numerical simulations and experiments. A new method, Virtual Rapid Robot Prototyping, is introduced to create system models rapidly and accurately. This method is then extended to configure experimental setups with actual master systems working with system models of the slave robots accompanied with virtual reality screens as well as the actual slaves. Fault-tolerant design and modeling of the master and slave systems are also addressed at different levels to prevent subsystem failure. Teleoperation controllers are designed to compensate for instabilities due to communication time delays. Modifications to the existing controllers are proposed to configure a controller that is reliable in communication line failures. Position/force controllers are also introduced for master and/or slave robots. Later, controller architecture changes are discussed in order to make these controllers dependable even in systems experiencing communication problems. The customary and proposed controllers for teleoperation systems are tested in numerical simulations on single- and multi-DOF teleoperation systems. Experimental studies are then conducted on seven different systems that included limited- and unlimited-workspace teleoperation to verify and improve simulation studies. Experiments of the proposed controllers were successful relative to the customary controllers. Overall, by employing the fault-tolerance features and the proposed controllers, a more reliable teleoperation system is possible to design and configure which allows these systems to be used in a wider range of critical missions.

Hardware Implementation of a Fault-Tolerant Hopfield Neural Network on FPGAs

This letter presents an FPGA implementation of a fault-tolerant Hopfield NeuralNetwork (HNN). The robustness of this circuit against Single Event Upsets (SEUs) and Single Event Transients (SETs) has been evaluated. Results show the fault tolerance of the proposed design, compared to a previous non fault- tolerant implementation and a solution based on triple modular redundancy (TMR) of a standard HNN design.