Occurrence of bipolar spectrum disorder and comorbidities in women with eating disorders

Abstract Background Eating disorder (ED) patients often have comorbidities with other psychiatric disorders, especially with mood disorders. Although recent studies suggest an intimate relationship between ED and bipolar disorder (BD), the study on a broader bipolar spectrum definition has not been done in this population. We aimed to study the occurrence of bipolar spectrum (BS) and comorbidities in eating disorder patients of a tertiary service provider. Methods Sixty-nine female patients diagnosed with anorexia nervosa, bulimia nervosa, or eating disorder not otherwise specified were evaluated. The assessment comprised the Structured Clinical Interview for DSM-IV Axis I Disorders (SCID-I), clinical criteria for diagnosis of the Zurich bipolar spectrum. Mann–Whitney tests compared means of continuous variables. The association between categorical variables and the groups was described using contingency tables and analyzed using the chi-square or Fisher's exact test. The level of significance alpha was set at 5%. Results The results showed that 68.1% of patients had comorbidity with bipolar spectrum, and this was associated with higher family income, proportion of married people, and comorbidity with substance use. The ED with BS group showed higher rates of substance use comorbidity (40.4%) than the ED without BS group (13.6%). Discussion These results showed that the bipolar spectrum is a common comorbidity in patients with eating disorders and is associated with correlates of clinical importance, notably the comorbidity with substance use. Due to the pattern of similarity between the groups with and without comorbid bipolar spectrum in relation to various outcomes evaluated, the identification of comorbidity can be difficult. However, the precise diagnosis and careful identification of clinical correlates may contribute to future advances in treating these conditions. Further studies are necessary to evaluate the association of other clinical correlates and its possible causal association.

Quantisation of the bosonic string

In this work we review the basic principles of the theory of the relativistic bosonic string through the study of the action functionals of Nambu-Goto and Polyakov and the techniques required for their canonical, light-cone, and path-integral quantisation. For this purpose, we briefly review the main properties of the gauge symmetries and conformal field theory involved in the techniques studied.

A relação entre as hormonas sexuais e a voz no sexo feminino

Trabalho Final do Curso de Mestrado Integrado em Medicina, Faculdade de Medicina, Universidade de Lisboa, 2014

Abordagens de estudo e performance da obra Responsório ao vento para violoncelo solo de Sílvio Ferraz

Recognized for his relevant writing for the cello, Silvio Ferraz wrote , in 2012, Segundo Responsório for cello solo and chamber group which followed Responsório ao Vento , a version of the same piece for solo cello . The work is characterized by the idea of continuity of sound moving through different textures , timbres , dynamics and musical gestures. The composer uses extended techniques, such as large sections in sul tasto playing three strings simultaneously, trills of natural harmonics , muffled trills with natural harmonics , col legno batuto , different types of glissando and simultaneous sounds of harmonic and non harmonic notes corroborate to a wealth of sounds and layers that create different textures. This article investigates the relationship of the composer with the cello, and relates Responsório ao Vento to his other works and studies the influences of the composer addressing technical and interpretive aspects of the piece drawn from performance experiences.

Buraco negros, correspondência AdS/BCFT e fluido/gravidade

Einstein’s equations with negative cosmological constant possess the so-called anti de Sitter space, AdSd+1, as one of its solutions. We will later refer to this space as to the "bulk". The holographic principle states that quantum gravity in the AdSd+1 space can be encoded by a d−dimensional quantum field theory on the boundary of AdSd+1 space, invariant under conformal transformations, a CFTd. In the most famous example, the precise statement is the duality of the type IIB string theory in the space AdS5 × S 5 and the 4−dimensional N = 4 supersymmetric Yang-Mills theory. Another example is provided by a relation between Einstein’s equations in the bulk and hydrodynamic equations describing the effective theory on the boundary, the so-called fluid/gravity correspondence. An extension of the "AdS/CFT duality"for the CFT’s with boundary was proposed by Takayanagi, which was dubbed the AdS/BCFT correspondence. The boundary of a CFT extends to the bulk and restricts a region of the AdSd+1. Neumann conditions imposed on the extension of the boundary yield a dynamic equation that determines the shape of the extension. From the perspective of fluid/gravity correspondence, the shape of the Neumann boundary, and the geometry of the bulk is sourced by the energy-momentum tensor Tµν of a fluid residing on this boundary. Clarifying the relation of the Takayanagi’s proposal to the fluid/gravity correspondence, we will study the consistence of the AdS/BCFT with finite temperature CFT’s, or equivalently black hole geometries in the bulk.

O emprego do imalt como solução interpretativo-composicional em 3 obras autorais para violão

The task of expression undertaken by the performer falls largely on the right hand of guitarist. Aware of this fact, past and present masters have left their contributions to the development of right hand technique. It is clear, with rare exceptions, that educational and interpretative proposals, so far, have addressed the attack on the strings from the flexion of the fingers. This work, however, presents a technical resource called imalt, including in the attack action, the extension movement. Some techniques used in specific circumstances, such as the dedillo, the alzapúa, the tremulo and the rasgueado also use extension movements in the attack. They are put in perspective with the imalt providing a panoramic view of their individual characteristics. The use of imalt in the traditional guitar repertoire is exemplified in Villa Lobos, Ponce and Brouwer. Three pieces were composed for this work: Shravana, Alegoria and Vandana. Compositional techniques such as melodic contour applying and ostinato have been reviewed and used in the preparation of these compositions. A detailed record of compositional trajectory is presented. Therefore, the Model for the Compositional Process Accompaniment according Silva (2007) is used. Some events that have left the imalt in evidence are reported, as the launch and distribution of the Compact Disc (CD) Imalt, publishing scores and interviews. Finally is presented concluding comments, pointing possibilities opened up by this work.

Infiltração de sal de alumínio em fibras de sisal para obtenção de fibras de alumina

ANDRADE JR., T. E. et al. Infiltração de sal de alumínio em fibras de sisal para obtenção de fibras de alumina. Cerâmica, v.51, n.317, p.37-41.ISSN 0366-6913. Disponível em:. Acesso em: 06 out. 2010.

Remoção de instrumentos fraturados em Endodontia

A área da Endodontia está em constante progresso. Os materiais utilizados nos instrumentos Endodônticos, primordialmente, eram construídos com base em cordas de piano. Seguiu-se uma fase em que estes eram de aço de carbono, mas sofriam corrosão significativa devido ao cloro presente no hipoclorito de sódio, bem como aos processos de esterilização a vapor. Foi necessário evoluir novamente e foram introduzidos os instrumentos de aço inoxidável. Estes apresentavam alta resistência e dureza, mas algumas desvantagens devido à falta de flexibilidade. Atualmente, os instrumentos de NiTi proporcionam uma melhor flexibilidade e efeito de memória de forma. A fratura de instrumentos em Endodontia pode ocorrer por dois grandes fatores: a torção e a flexão por fadiga cíclica, podendo também ser a conjugação de ambos. Fatores anatômicos, como a curvatura e a largura do canal ou outros fatores como ciclos de esterilização, número de usos, etc., podem influenciar uma fratura mais precoce dos instrumentos. A incidência da fratura de instrumentos, embora seja pouco frequente, pode ser reduzida a um mínimo absoluto se os clínicos usarem as características de torque e de stress adequadas. Um bom conhecimento dos procedimentos clínicos, da anatomia, dos materiais e a utilização de instrumentos como o microscópio podem ajudar a prevenir ou a resolver a fratura dos instrumentos. No entanto, a melhor forma de prevenir a fratura é a sua prevenção. A desinfeção é o procedimento mais importante para o sucesso de um tratamento Endodôntico, portanto para que isto seja possível, é necessária uma boa conformação canalar. A presença de um instrumento no interior do canal pode comprometer a desinfecção, especialmente caso tenha ocorrido numa fase precoce da preparação canalar. Aquando da fratura de um instrumento, deve-se refletir sobre os procedimentos a seguir, podendo-se optar por várias abordagens, nomeadamente pela manutenção do instrumento no canal e obturação incorporando o fragmento, pela remoção do segmento através de diversas técnicas (ultrassons ou técnicas de microtubos, etc.), e ainda pela realização do bypass ou pela cirurgia Endodôntica. Em última instância pode ser realizada a extração do elemento dentário.

Infiltração de sal de alumínio em fibras de sisal para obtenção de fibras de alumina

ANDRADE JR., T. E. et al. Infiltração de sal de alumínio em fibras de sisal para obtenção de fibras de alumina. Cerâmica, v.51, n.317, p.37-41.ISSN 0366-6913. Disponível em:. Acesso em: 06 out. 2010.

Influência da profundidade e dos parâmetros ambientais sobre o desenvolvimento de Gracilaria birdiae (Rhodophyta, Gracilariales) em viveiro de camarão

This study evaluates the influence of depth and environmental parameters on the development of Gracilaria birdiae Plastino & Oliveira (Gracilariaceae Rhodophyta) in an organic shrimp pound (Litopenaeus vannamei) under euthrophical conditions. PVC structures (module) witch four ropes laden with 150 g of macroalgae each, were kept during 35 days at three different depths (surface, 10 and 20 cm depth). Wet biomass weighing and environmental parameters (temperature, salinity, turbidity, pH, transparence, precipitation, evaporation, insolation, accumulated solar radiation, nitrite, nitrate, ammonium and orthophosphate) were measured weekly. At all three proposed depths, the macroalgae displayed a higher biomass at the end of experiment than at the initial inoculations. The module kept at a 10 cm depth presented the greatest average biomass (186,3), followed by that kept at 20 cm (180,4 g) and the surface module (169,9 g). Biomass variations showed algae to suffer the direct effects of depths. Biomass loss was associated with the factors that influence light penetration, such as sediment deposits above the thallus, rate of evaporation and precipitation. The smallest loses occurred in the algae kept on surface (0,16%), followed by the algae kept at 20 cm (0,20%) and 10 cm (0,22%). The specific growth rate (SGR) of G. birdiae showed no significant difference between the three depths nor the sample periods. Nevertheless, the modules kept at 10 and 20 cm depths presented similar growth evolution, both growing 0,38%·per day-1, while the module kept on surface had an average SGR of 0,36%·day-1. The models related to growth rate demonstrated temperature, salinity, pH, orthophosphate, ammonium, precipitation and turbidity as the principal environmental parameters influencing the development of G. birdiae

Experiências formativas de jovens instrumentistas : um estudo a partir de entrevistas narrativas

Dissertação (mestrado)—Universidade de Brasília, Instituto de Artes, Departamento de Música, Programa de Pós-graduação em Música, 2015.

Produção de fibras de alumina biomórfica a partir do sisal

Sisal is a renewable agricultural resource adapted to the hostile climatic and soil conditions particularly encountered in the semi-arid areas of the state of Rio Grande do Norte. Consequently, sisal has played a strategic role in the economy of the region, as one of few options of income available in the semi-arid. Find new options and adding value to products manufactured from sisal are goals that contribute not only to the scientific and technological development of the Northeastern region, but also to the increase of the family income for people that live in the semi-arid areas where sisal is grown. Lignocellulosic fibers are extracted from sisal and commonly used to produce both handcrafted and industrial goods including ropes, mats and carpets. Alternatively, addedvalue products can be made using sisal to produce alumina fibers (Al2O3) by biotemplating, which consists in the reproduction of the natural fiber-like structure of the starting material. The objective of this study was to evaluate the conditions necessary to convert sisal into alumina fibers by biotemplating. Alumina fibers were obtaining after pretreating sisal fibers and infiltrating them with a Al2Cl6 saturated solution, alumina sol from aluminum isopropoxide or aluminum gas. Heat-treating temperatures varied from 1200 ºC to 1650 °C. The resulting fibers were then characterized by X-ray diffraction and scanning electronic microscopy. Fibers obtained by liquid infiltration revealed conversion only of the surface of the fiber into α-Al2O3, which yielded limited resistance to handling. Gas infiltration resulted in stronger fibers with better reproduction of the inner structure of the original fiber. All converted fibers consisted of 100% α-Al2O3 suggesting a wide range of technological applications especially those that require thermal isolation

Influência da profundidade e dos parâmetros ambientais sobre o desenvolvimento de Gracilaria birdiae (Rhodophyta, Gracilariales) em viveiro de camarão

This study evaluates the influence of depth and environmental parameters on the development of Gracilaria birdiae Plastino & Oliveira (Gracilariaceae Rhodophyta) in an organic shrimp pound (Litopenaeus vannamei) under euthrophical conditions. PVC structures (module) witch four ropes laden with 150 g of macroalgae each, were kept during 35 days at three different depths (surface, 10 and 20 cm depth). Wet biomass weighing and environmental parameters (temperature, salinity, turbidity, pH, transparence, precipitation, evaporation, insolation, accumulated solar radiation, nitrite, nitrate, ammonium and orthophosphate) were measured weekly. At all three proposed depths, the macroalgae displayed a higher biomass at the end of experiment than at the initial inoculations. The module kept at a 10 cm depth presented the greatest average biomass (186,3), followed by that kept at 20 cm (180,4 g) and the surface module (169,9 g). Biomass variations showed algae to suffer the direct effects of depths. Biomass loss was associated with the factors that influence light penetration, such as sediment deposits above the thallus, rate of evaporation and precipitation. The smallest loses occurred in the algae kept on surface (0,16%), followed by the algae kept at 20 cm (0,20%) and 10 cm (0,22%). The specific growth rate (SGR) of G. birdiae showed no significant difference between the three depths nor the sample periods. Nevertheless, the modules kept at 10 and 20 cm depths presented similar growth evolution, both growing 0,38%·per day-1, while the module kept on surface had an average SGR of 0,36%·day-1. The models related to growth rate demonstrated temperature, salinity, pH, orthophosphate, ammonium, precipitation and turbidity as the principal environmental parameters influencing the development of G. birdiae

Sistema de instrumentação mecanizada Hyflex EDM

A Endodontia é uma área em constante evolução. Consideráveis desenvolvimentos nos materiais e técnicas têm sido essenciais para o melhoramento dos resultados nos tratamentos realizados. É exemplo disso mesmo a constituição dos instrumentos Endodônticos primordiais, construídos em cordas de piano, com evolução para aço de carbono, material este que sofria corrosão provocado pelo cloro presente no hipoclorito de sódio. O aço de carbono evoluiu para aço inoxidável e deste as limas endodônticas passaram a ser feitas em níquel-titânio, conferindo-lhes melhor flexibilidade e efeito de memória de forma. Mesmo com todas estas melhorias significativas, fraturas de instrumentos e erros durante a instrumentação continuam a acontecer e com eles veio a necessidade da pesquisa de possíveis melhorias da constituição das limas em NiTi. Como resultado surgiram ligas como o M-wire, fase-R e CM-wire, criadas a partir de tratamentos térmicos, que trouxeram às limas Endodônticas maior flexibilidade e resistência à fratura que os instrumentos feitos em NiTi convencional. A mais recente evolução das limas Ni-Ti, desenvolvida pela Coltene Whaldent (Allstätten, Suiça), são as limas Hyflex EDM, limas para canais radiculares de 5ª geração. O seu processo de fabrico por eletroerosão cria uma superfície única fazendo com que estas limas sejam mais duras e resistam mais à quebra, aliado à sua alta flexibilidade. É possível assim reduzir o número de limas para a limpeza e modelagem dos canais durante os tratamentos endodônticos sem comprometer a preservação da anatomia dos canais. As limas Hyflex EDM possuem, tal como as limas Hyflex CM, o efeito de controle de memória (CM), o que confere propriedades muito similares entre os dois sistemas.

Ranking e qualidade educativa. Uma relação (im)provável? Um estudo em duas escolas públicas

Com o presente trabalho pretendemos compreender eventuais relações entre a posição de uma escola no ranking dos exames nacionais do 9.º ano do ensino básico e a qualidade do serviço educativo prestado. O estudo decorreu em dois agrupamentos de escolas com posições diferenciadas nas listas de ordenação (rankings) publicadas no ano de 2013. Recolhemos informação através de entrevista aos diretores dos órgãos de gestão, análise documental e inquérito por questionário. Adotámos metodologia qualitativa e quantitativa cujos dados foram triangulados e analisados à luz do quadro teórico. A posição bastante diferenciada entre os dois agrupamentos no ranking (249.º e 848.º, respetivamente) não parece estar relacionado com a prestação do serviço educativo, para além de a classificação ser a mesma nos relatórios de avaliação externa, as diferenças identificadas através dos questionários e das entrevistas são pontuais e pouco relevantes reforçando que efetivamente a posição no ranking diz muito pouco sobre o trabalho realizado nas escolas, sobre as suas dinâmicas e lógicas de ação; Abstract: Ranking and educational quality. An (un)likely relationship? A study in two public schools With this study we aim to understand possible links between the ranking position of two different school based on the 9th grade’s national exams results and the quality of educational services provided. The study took place in two groups of schools with different ranking positions published in 2013. We collect information through interviews to the directors of the management bodies, document analysis and questionnaire survey. We adopted qualitative and quantitative methodology and data were triangulated and analyzed in the light of the theoretical framework. The rather unique position between the two groups in the rankings (249 and 848, respectively) does not seem to be related to the provision of educational services, as well as the classification is the same in the external evaluation reports, the differences identified by questionnaires and interviews are timely and very relevant stressing that effectively ranking position says very little about the work done in schools, on its dynamics and logics of action.