Infra-estrutura para portal internet integrador de serviços

Esta tese surge no contexto de sistemas e serviços web. O objectivo é propor uma solução para o problema da integração de informação de diversas fontes, numa plataforma web única, personalizável e adaptável ao utilizador. Nos casos de empresas ou organizações que tenham para diferentes tarefas, diferentes sistemas de informação independentes, o problema da integração de informação surge com a necessidade de integração destes numa única interface disponibilizada aos seus utilizadores. A integração de serviços numa mesma interface pressupõe que haja comunicação entre um sistema central (que fornece a interface) e os diversos sistemas existentes (que detêm a totalidade – ou parte – da informação a apresentar). Assim, será necessário garantir a identidade do utilizador a cada um dos serviços apresentados, bem como assegurar que cada utilizador tem à sua disposição de forma centralizada, apenas e só a informação e operações a que realmente tem acesso em cada um dos sistemas. Trata-se de uma plataforma que pretende por um lado, fornecer a informação correcta e orientada ao utilizador e, por outro lado, garantir que a organização que suporta o sistema consegue informar e interagir com os seus utilizadores de forma mais eficaz. O cenário adoptado é a Universidade de Aveiro. Esta pretende disponibilizar uma plataforma electrónica, onde os diferentes interlocutores (alunos, docentes, funcionários, ex-alunos, etc.) possam ter acesso a informação dirigida e orientada aos seus interesses e funções na Universidade. De modo a que cada utilizador seja realmente visto como um utilizador único, serão estudados e comparados serviços de modelação de utilizador e perfis de utilizador. Será proposto um serviço de modelação de utilizador e uma lógica de criação de perfis de utilizador, distintos do existente no estado de arte. Esta lógica conjuga a personalização da interface por parte do utilizador, com a gestão de operações e definição de políticas de segurança por parte da organização, de forma independente relativamente ao sistema de informação subjacente.

Arquitectura e plataforma de Middleware para suporte de bibliotecas digitais distribuídas e ecléticas

O trabalho apresentado nesta dissertação teve por objectivo principal a concepção, modelação e desenvolvimento de uma plataforma de middleware que permitisse a integração de sistemas de informação, em todos os seus níveis (dados, lógico e apresentação), perfazendo uma federação de bibliotecas digitais distribuídas e ecléticas. Para este fim, foram estudadas as várias abordagens de modelação e organização das bibliotecas digitais, assim como os diversos sistemas e tecnologias de suporte existentes no momento inicial do trabalho. Compreendendo a existência de muitas lacunas ainda neste domínio, nomeadamente ao nível da interoperabilidade de sistemas heterogéneos e integração da semântica de metadados, decidiu-se proceder a um trabalho de investigação e desenvolvimento que pudesse apresentar eventuais soluções para o preenchimento de tais lacunas. Desta forma, surgem neste trabalho duas tecnologias, o XML e o Dublin Core, que servem de base a todas as restantes tecnologias usadas para a interoperabilidade e para a integração. Ainda utilizando estas tecnologias base, foram estudados e desenvolvidos meios simples, mas eficientes, de salvaguarda, indexação e pesquisa de informação, tentando manter a independência face aos grandes produtores de bases de dados, que só por si não resolvem alguns dos problemas mais críticos da investigação no domínio das bibliotecas digitais. ABSTRACT: The main objective of the work presented in this dissertation is the design, modulation and development of a middleware framework to allow information systems interoperability, in all their scope (data, logic and presentation), to accomplish a distributed and eclectic digital libraries federation. Several modulations and organizations were approached, and several support systems and technologies were studied. Understanding the existence of many gaps in this domain, namely in heterogeneous information systems interoperation and metadata semantic integration, it was decided to conduct a research and development work, which, eventually, could present some solutions to fill in these gaps. In this way, two technologies, XML and Dublin Core, appear to serve as the basis of all remaining technologies, to interoperate and to achieve semantic integration. Using yet these technologies, it was also studied and developed simple means, but efficient ones, to save, index and query information, preserving the independence from major data base producers, which by their selves don’t solve critical problems in the digital libraries research domain.

P2P and SOA architecture for digital libraries

In an information-driven society where the volume and value of produced and consumed data assumes a growing importance, the role of digital libraries gains particular importance. This work analyzes the limitations in current digital library management systems and the opportunities brought by recent distributed computing models. The result of this work is the implementation of the University of Aveiro integrated system for digital libraries and archives. It concludes by analyzing the system in production and proposing a new service oriented digital library architecture supported in a peer-to-peer infrastructure

Análise sobre a prevenção de incêndios florestais em Portugal

Dissertação de Mestrado, Gestão e Conservação da Natureza, Faculdade de Ciências do Mar e do Ambiente, Universidade do Algarve, 2007

Joaquim Rodrigo:a contínua reinvenção da pintura

Tese de doutoramento, História (História da Arte), Universidade de Lisboa, Faculdade de Letras, 2014

Reabilitação de edifícios Gaioleiros

Dissertação para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Edificações

Modeling radionuclides dispersion and deposition downwind of a coal-fired power plant

In this study the inhalation doses and respective risk are calculated for the population living within a 20 km radius of a coal-fired power plant. The dispersion and deposition of natural radionuclides were simulated by a Gaussian dispersion model estimating the ground level activity concentration. The annual effective dose and total risk were 0.03205 mSv/y and 1.25 x 10-8, respectively. The effective dose is lower than the limit established by the ICRP and the risk is lower than the limit proposed by the U.S. EPA, which means that the considered exposure does not pose any risk for the public health.

Assessment of direct radiological risk and indirect associated toxic risks originated by Coal-Fired Power Plants

Over the past few decades there has been some discussion concerning the increase of the natural background radiation originated by coal-fired power plants, due to the uranium and thorium content present in combustion ashes. The radioactive decay products of uranium and thorium, such as radium, radon, polonium, bismuth and lead, are also released in addition to a significant amount of 40K. Since the measurement of radioactive elements released by the gaseous emissions of coal power plants is not compulsory, there is a gap of information concerning this situation. Consequently, the prediction of dispersion and mobility of these elements in the environment, after their release, is based on limited data and the radiological impact from the exposure to these radioactive elements is unknown. This paper describes the methodology that is being developed to assess the radiological impact due to the raise in the natural background radiation level originated by the release and dispersion of the emitted radionuclides. The current investigation is part of a research project that is undergoing in the vicinity of Sines coal-fired power plant (south of Portugal) until 2013. Data from preliminary stages are already available and possible of interpretation.

Characterization of soils in an area of prescribed fire

The prescribed fire is a technique that is often used, it has several advantages. Pedological and hydropedological techniques were tested to assess the prescribed fire changes may cause in soils. This work was performed in Tresminas area (Vila Pouca de Aguiar, Northern Portugal), during February and March 2011. In the present study we applied several techniques. For the field sampling was followed the ISO 10381-1[1], ISO 10381-2[2], and FAO rules [3], as well as were used a grid with 17 points for measuring the soil parameters. During the fire, we have tried to check, with the assistance of the Portuguese Forestry Authority, some important parameters such as, the propagation speed, the size of the flame front and the intensity of energy emitted per unit area. Before the fire, was collected carefully soil disturbed and undisturbed samples for laboratory analysis, and measured soil water content; we also have placed four sets of thermocouples for measuring soil temperature. After the fire, were collected the thermocouples and new soil samples; the water content were measured in the soil and collected ashes. In the laboratory, after preparing and sieving the samples, were determined the soil particle size. The soil pH and electrical conductivity in water was also determined. The total carbon (TC) and inorganic carbon (IC)[4] was measured by a Shimadzu TOC-Vcsn. The water content in soil has not varied significantly before and after the fire, as well as soil pH and soil electrical conductivity. The TC and IC did not change, which was expected, since the fire not overcome the 200° C. Through the various parameters, we determined that the prescribed fire didn’t affect the soil. The low temperature of the fire and its rapid implementation that lead to the possible adverse effects caused by the wild fire didn’t occurred.

Radiation dose rates and exposure associated to Technologically Enhanced Naturally Occurring Radioactive Materials (TENORM) at locations of a Portuguese coal-fired power plant

Coal contains trace quantities of natural radionuclides such as Th-232, U-235, U-238, as well as their radioactive decay products and 40K. These radionuclides can be released as fly ash in atmospheric emissions from coal-fired power plants, dispersed into the environment and deposited on the surrounding top soils. Therefore, the natural radiation background level is enhanced and consequently increase the total dose for the nearby population. A radiation monitoring programme was used to assess the external dose contribution to the natural radiation background, potentially resulting from the dispersion of coal ash in past atmospheric emissions. Radiation measurements were carried out by gamma spectrometry in the vicinity of a Portuguese coal-fired power plant. The radiation monitoring was achieved both on and off site, being the boundary delimited by a 20 km circle centered in the stacks of the coal plant. The measured radionuclides concentrations for the uranium and thorium series ranged from 7.7 to 41.3 Bq/kg for Ra-226 and from 4.7 to 71.6 Bq/kg for Th-232, while K-40 concentrations ranged from 62.3 to 795.1 Bq/kg. The highest values were registered near the power plant and at distances between 6 and 20 km from the stacks, mainly in the prevailing wind direction. The absorbed dose rates were calculated for each sampling location: 13.97-84.00 ηGy/h, while measurements from previous studies carried out in 1993 registered values in the range of 16.6-77.6 ηGy/h. The highest values were registered at locations in the prevailing wind direction (NW-SE). This study has been primarily done to assess the radiation dose rates and exposure to the nearby population in the surroundings of a coal-fired power plant. The results suggest an enhancement or at least an influence in the background radiation due to the coal plant past activities.

Assessment of the environmental radiation by in situ gamma ray spectrometry

Naturally occurring radioactive materials (NORM) under certain conditions can reach hazardous radiological levels contributing to an additional exposure dose to ionizing radiation. Most environmental concerns are associated with uranium mining and milling sites, but the same concerns should be addressed to natural near surface occurrences of uranium as well as man-made sources such as technologically enhanced naturally occurring radioactive materials (TENORM) resulting from phosphates industry, ceramic industry and energy production activities, in particular from coal-fired power plants which is one of the major sources of increased exposure to man from enhanced naturally occurring materials. This work describes the methodology developed to assess the environmental radiation by in situ gamma spectrometry in the vicinity of a Portuguese coal fired power plant. The current investigation is part of a research project that is undergoing in the vicinity of Sines Coal-Fired Power Plant (south of Portugal) until the end of 2013.

Radiological impact associated to Technologically Enhanced Naturally Occurring Radioactive Materials (TENORM) from coal-fired power plants emissions

Certain materials used and produced in a wide range of non-nuclear industries contain enhanced activity concentrations of natural radionuclides. In particular, electricity production from coal is one of the major sources of increased human exposure to naturally occurring radioactive materials. A methodology was developed to assess the radiological impact due to natural radiation background. The developed research was applied to a specific case study, the Sines coal-fired power plant, located in the southwest coastline of Portugal. Gamma radiation measurements were carried out with two different instruments: a sodium iodide scintillation detector counter (SPP2 NF, Saphymo) and a gamma ray spectrometer with energy discrimination (Falcon 5000, Canberra). Two circular survey areas were defined within 20 km of the power plant. Forty relevant measurements points were established within the sampling area: 15 urban and 25 suburban locations. Additionally, ten more measurements points were defined, mostly at the 20-km area. The registered gamma radiation varies from 20 to 98.33 counts per seconds (c.p.s.) corresponding to an external gamma exposure rate variable between 87.70 and 431.19 nGy/h. The highest values were measured at locations near the power plant and those located in an area within the 6 and 20 km from the stacks. In situ gamma radiation measurements with energy discrimination identified natural emitting nuclides as well as their decay products (Pb-212, Pb-2142, Ra-226, Th-232, Ac-228, Th-234, Pa-234, U- 235, etc.). According to the results, an influence from the stacks emissions has been identified both qualitatively and quantitatively. The developed methodology accomplished the lack of data in what concerns to radiation rate in the vicinity of Sines coal-fired power plant and consequently the resulting exposure to the nearby population.

Measurements of environmental background radiation in the surrounding area of a coal-fired power plant

Certain materials used and produced in a wide range of non-nuclear industries contain enhanced activity concentrations of natural radionuclides. In particular, electricity production from coal is one of the major sources of increased exposure to man from enhanced naturally occurring materials. Over the past decades there has been some discussion about the elevated natural background radiation in the area near coal-fired power plants due to high uranium and thorium content present in coal. This work describes the methodology developed to assess the radiological impact due to natural radiation background increasing levels, potentially originated by a coal-fired power plant’s operation. Gamma radiation measurements have been done with two different instruments: a scintillometer (SPP2 NF, Saphymo) and a gamma ray spectrometer with energy discrimination (Falcon 5000, Canberra). A total of 40 relevant sampling points were established at locations within 20 km from the power plant: 15 urban and 25 suburban measured stations. The highest values were measured at the sampling points near to the power plant and those located in the area within the 6 and 20 km from the stacks. This may be explained by the presence of a huge coal pile (1.3 million tons) located near the stacks contributing to the dispersion of unburned coal and, on the other hand, the height of the stacks (225 m) which may influence ash’s dispersion up to a distance of 20 km. In situ gamma radiation measurements with energy discrimination identified natural emitting nuclides as well as their decay products (212Pb, 214Pb, 226Ra 232Th, 228Ac, 234Th 234Pa, 235U, etc.). This work has been primarily done to in order to assess the impact of a coal-fired power plant operation on the background radiation level in the surrounding area. According to the results, an increase or at least an influence has been identified both qualitatively and quantitatively.

Assessment of heavy metals in the surroundings of coal-fired power plant

This paper aims to survey metal concentrations in soils in the vicinity of a coal-firedpower plant located in southwest of Portugal. Two annual sampling campaigns were carried out to measure a hypothetical soil contamination around the coal plant. The sampling area was divided into two subareas, both centered in the emission source, delimited by two concentric circles with radius of 6 km and 20 km. About 40 samplings points were defined in the influence area. Metals measurements were performed with a portable analytical X-ray dispersive energy fluorescence spectrometer identifying about 20 different elements in each sampling point. The most relevant elements measured included As, Cu, Fe, Hg, Pb, Ti and Zn in both sampling areas. Considering the results obtained in the first sampling campaign, arsenic is predominantly higher within the 6-20 km sampling area. The second sampling campaign showed that both sampling areas presented relatively similar metal concentrations except for Fe, Mn, Sr and Zn which concentration is higher within the 6-20 km sampling area. Also, As, Fe, Mn and Ti concentrations decreased significantly from the first to the second sampling campaign and their concentration were predominately higher in the NE-E and E-SE directions.

Particulate matter flux deposition in the vicinity of a coal-fired power plant

This paper describes the methodology adopted to assess local air quality impact in the vicinity of a coal power plant located in the south of Portugal. Two sampling areas were selected to assess the deposition flux of dust fallout and its potential spatial heterogeneity. The sampling area was divided into two subareas: the inner, with higher sampling density and urban and suburban characteristics, inside a 6-km circle centered on the stacks, and an outer subarea, mainly rural, with lower sampling density within a radius of 20 km. Particulate matter deposition was studied in the vicinity of the coal fired power plant during three seasonal sampling campaigns. For the first one, the average annual flux of dust fallout was 22.51 g/(m2 yr), ranging from 4.20 to 65.94 g/(m2 yr); for the second one was 9.47 g/(m2 yr), ranging from 0.78 to 32.72 g/(m2 yr) and for the last one was 38.42 g/(m2 yr), ranging from 1.41 to 117.48 g/(m2 yr). The fallout during the second campaign turned out to be much lower than for others. This was in part due to meteorological local patterns but mostly due to the fact that the power plant was not working at full power during the second sampling campaign.155