Analysis of competitiveness in the NBA regular seasons

[EN] Research background and hypothesis. Several attempts have been made to understand some modalities of sport from the point of view of complexity. Most of these studies deal with this phenomenon with regard to the mechanics of the game itself (in isolation). Nevertheless, some research has been conducted from the perspective of competition between teams. Our hypothesis was that for the study of competitiveness levels in the system of league competition our analysis model (Shannon entropy), is a useful and highly sensitive tool to determine the degree of global competitiveness of a league. Research aim. The aim of our study was to develop a model for the analysis of competitiveness level in team sport competitions based on the uncertainty level that might exist for each confrontation. Research methods. Degree of uncertainty or randomness of the competition was analyzed as a factor of competitiveness. It was calculated on the basis of the Shannon entropy. Research results. We studied 17 NBA regular seasons, which showed a fairly steady entropic tendency. There were seasons less competitive (? 0.9800) than the overall average (0.9835), and periods where the competitiveness remained at higher levels (range: 0.9851 to 0.9902). Discussion and conclusions. A league is more competitive when it is more random. Thus, it is harder to predict the fi nal outcome. However, when the competition is less random, the degree of competitiveness will decrease signifi cantly. The NBA is a very competitive league, there is a high degree of uncertainty of knowing the fi nal result.

Optimized temperature and deadspace correction improve analysis of multiple breath washout measurements by ultrasonic flowmeter in infants

BACKGROUND: Assessment of lung volume (FRC) and ventilation inhomogeneities with ultrasonic flowmeter and multiple breath washout (MBW) has been used to provide important information about lung disease in infants. Sub-optimal adjustment of the mainstream molar mass (MM) signal for temperature and external deadspace may lead to analysis errors in infants with critically small tidal volume changes during breathing. METHODS: We measured expiratory temperature in human infants at 5 weeks of age and examined the influence of temperature and deadspace changes on FRC results with computer simulation modeling. A new analysis method with optimized temperature and deadspace settings was then derived, tested for robustness to analysis errors and compared with the previously used analysis methods. RESULTS: Temperature in the facemask was higher and variations of deadspace volumes larger than previously assumed. Both showed considerable impact upon FRC and LCI results with high variability when obtained with the previously used analysis model. Using the measured temperature we optimized model parameters and tested a newly derived analysis method, which was found to be more robust to variations in deadspace. Comparison between both analysis methods showed systematic differences and a wide scatter. CONCLUSION: Corrected deadspace and more realistic temperature assumptions improved the stability of the analysis of MM measurements obtained by ultrasonic flowmeter in infants. This new analysis method using the only currently available commercial ultrasonic flowmeter in infants may help to improve stability of the analysis and further facilitate assessment of lung volume and ventilation inhomogeneities in infants.

Ontologies and Methods for Interoperability of Engineering Analysis Models (EAMS) in an E-Design Environment

ABSTRACT ONTOLOGIES AND METHODS FOR INTEROPERABILITY OF ENGINEERING ANALYSIS MODELS (EAMS) IN AN E-DESIGN ENVIRONMENT SEPTEMBER 2007 NEELIMA KANURI, B.S., BIRLA INSTITUTE OF TECHNOLOGY AND SCIENCES PILANI INDIA M.S., UNIVERSITY OF MASSACHUSETTS AMHERST Directed by: Professor Ian Grosse Interoperability is the ability of two or more systems to exchange and reuse information efficiently. This thesis presents new techniques for interoperating engineering tools using ontologies as the basis for representing, visualizing, reasoning about, and securely exchanging abstract engineering knowledge between software systems. The specific engineering domain that is the primary focus of this report is the modeling knowledge associated with the development of engineering analysis models (EAMs). This abstract modeling knowledge has been used to support integration of analysis and optimization tools in iSIGHT FD , a commercial engineering environment. ANSYS , a commercial FEA tool, has been wrapped as an analysis service available inside of iSIGHT-FD. Engineering analysis modeling (EAM) ontology has been developed and instantiated to form a knowledge base for representing analysis modeling knowledge. The instances of the knowledge base are the analysis models of real world applications. To illustrate how abstract modeling knowledge can be exploited for useful purposes, a cantilever I-Beam design optimization problem has been used as a test bed proof-of-concept application. Two distinct finite element models of the I-beam are available to analyze a given beam design- a beam-element finite element model with potentially lower accuracy but significantly reduced computational costs and a high fidelity, high cost, shell-element finite element model. The goal is to obtain an optimized I-beam design at minimum computational expense. An intelligent KB tool was developed and implemented in FiPER . This tool reasons about the modeling knowledge to intelligently shift between the beam and the shell element models during an optimization process to select the best analysis model for a given optimization design state. In addition to improved interoperability and design optimization, methods are developed and presented that demonstrate the ability to operate on ontological knowledge bases to perform important engineering tasks. One such method is the automatic technical report generation method which converts the modeling knowledge associated with an analysis model to a flat technical report. The second method is a secure knowledge sharing method which allocates permissions to portions of knowledge to control knowledge access and sharing. Both the methods acting together enable recipient specific fine grain controlled knowledge viewing and sharing in an engineering workflow integration environment, such as iSIGHT-FD. These methods together play a very efficient role in reducing the large scale inefficiencies existing in current product design and development cycles due to poor knowledge sharing and reuse between people and software engineering tools. This work is a significant advance in both understanding and application of integration of knowledge in a distributed engineering design framework.

Enlarged tracheoesophageal puncture: A systematic review and retrospective analysis

Background. An enlarged tracheoesophageal puncture (TEP) results in aspiration around the voice prosthesis (VP) and may lead to pneumonia. The aims of this research were: (1) to conduct a systematic review and meta-analysis on enlarged TEP; (2) to analyze preoperative, perioperative, and postoperative risk factors for enlarged TEP; and (3) to evaluate control of leakage around the VP using conservative treatments and adverse events in patients with enlarged TEP.^ Methods. A systematic review was conducted (1978-2008). A summary risk estimate was calculated using a random-effects meta-analysis model. A retrospective cohort study was completed. Patients who underwent total laryngectomy and TEP at The University of Texas M. D. Anderson Cancer Center (MDACC) were included. Multiple logistic regression methods were used to assess risk factors for enlargement. Descriptive and bivariate statistics were calculated to evaluate outcomes and adverse events. Results: Twenty-seven manuscripts were included in the systematic review. The summary risk estimate of enlarged TEP/leakage around the VP was 7.2% (95% CI: 4.8%-9.6%). Temporary VP removal and TEP-site injections were the most commonly reported treatments. Neither prosthetic diameter (p=0.076) nor timing of TEP (p=0.297) significantly increased risk of enlargement per stratified analyses of published outcomes. The cumulative incidence of enlarged TEP was 18.6% (36/194, 95% CI: 13.0%-24.1%) in the MDACC cohort. Enlarged TEP occurred exclusively in irradiated patients. Adjusting for length of follow-up and timing of TEP, advanced nodal disease (ORadjusted: 4.3, 95% CI: 1.0-19.1), stricture (ORadjusted : 3.2, 95% CI: 1.2-8.6), and locoregional recurrence/distant metastasis after laryngectomy (ORadjusted: 6.2, 95% CI: 2.3-16.4) increased risk of enlarged TEP. At last follow-up, conservative methods controlled leakage around the VP in 81% (29/36) of patients. Unresolved leakage was associated with recurrent cancer (p=0.081) and TEP-site irregularity (p=0.003). Relative to those without enlargement, enlarged TEP patients had significantly higher risk of pneumonia (RR: 3.4, 95% CI: 1.9-6.2).^ Conclusions. These data establish that enlarged TEP poses serious health risks, and provide insight into medical and oncologic factors that may contribute to development of this complication. In addition, this research supports the use of conservative treatments to address leakage after enlarged TEP in lieu of complete TEP closure.^

Assessing participation in online discussion forums: a proposal for multidimensional analysis

This paper aims to assess the discussion forums being used in the programme Especialista Universitario online sobre Tecnologías de la Información y la Comunicación, taught at the University of Alicante, on the basis of the analysis model suggested by Kay (2004). In such a model, it is essential to represent graphically the forum activity so that the visual representation may improve analysis. This research has allowed reaching results which define the forum activity and has contributed with a proposal for multi analysis in the area of assessing participation in communication within online discussion forums.

Simulation of continuous networks with MODEL /

Includes bibliographical references.

Simulation methods and model design

Most of the pages of the photocopy, which are in double columns, represent two pages of the original.

Validation of multicriteria analysis models

Validation procedures play an important role in establishing the credibility of models, improving their relevance and acceptability. This article reviews the testing of models relevant to environmental and natural resource management with particular emphasis on models used in multicriteria analysis (MCA). Validation efforts for a model used in a MCA catchment management study in North Queensland, Australia, are presented. Determination of face validity is found to be a useful approach in evaluating this model, and sensitivity analysis is useful in checking the stability of the model. (C) 2000 Elsevier Science Ltd. All rights reserved.

Improving envelopment in Data Envelopment Analysis under variable returns to scale

In a Data Envelopment Analysis model, some of the weights used to compute the efficiency of a unit can have zero or negligible value despite of the importance of the corresponding input or output. This paper offers an approach to preventing inputs and outputs from being ignored in the DEA assessment under the multiple input and output VRS environment, building on an approach introduced in Allen and Thanassoulis (2004) for single input multiple output CRS cases. The proposed method is based on the idea of introducing unobserved DMUs created by adjusting input and output levels of certain observed relatively efficient DMUs, in a manner which reflects a combination of technical information and the decision maker's value judgements. In contrast to many alternative techniques used to constrain weights and/or improve envelopment in DEA, this approach allows one to impose local information on production trade-offs, which are in line with the general VRS technology. The suggested procedure is illustrated using real data. © 2011 Elsevier B.V. All rights reserved.

Dynamic joint sentiment-topic model

Social media data are produced continuously by a large and uncontrolled number of users. The dynamic nature of such data requires the sentiment and topic analysis model to be also dynamically updated, capturing the most recent language use of sentiments and topics in text. We propose a dynamic Joint Sentiment-Topic model (dJST) which allows the detection and tracking of views of current and recurrent interests and shifts in topic and sentiment. Both topic and sentiment dynamics are captured by assuming that the current sentiment-topic-specific word distributions are generated according to the word distributions at previous epochs. We study three different ways of accounting for such dependency information: (1) Sliding window where the current sentiment-topic word distributions are dependent on the previous sentiment-topic-specific word distributions in the last S epochs; (2) skip model where history sentiment topic word distributions are considered by skipping some epochs in between; and (3) multiscale model where previous long- and shorttimescale distributions are taken into consideration. We derive efficient online inference procedures to sequentially update the model with newly arrived data and show the effectiveness of our proposed model on the Mozilla add-on reviews crawled between 2007 and 2011. © 2013 ACM 2157-6904/2013/12-ART5 $ 15.00.

An exergy based engineering and economic analysis of sustainable building

To achieve the goal of sustainable development, the building energy system was evaluated from both the first and second law of thermodynamics point of view. The relationship between exergy destruction and sustainable development were discussed at first, followed by the description of the resource abundance model, the life cycle analysis model and the economic investment effectiveness model. By combining the forgoing models, a new sustainable index was proposed. Several green building case studies in U.S. and China were presented. The influences of building function, geographic location, climate pattern, the regional energy structure, and the technology improvement potential of renewable energy in the future were discussed. The building’s envelope, HVAC system, on-site renewable energy system life cycle analysis from energy, exergy, environmental and economic perspective were compared. It was found that climate pattern had a dramatic influence on the life cycle investment effectiveness of the building envelope. The building HVAC system energy performance was much better than its exergy performance. To further increase the exergy efficiency, renewable energy rather than fossil fuel should be used as the primary energy. A building life cycle cost and exergy consumption regression model was set up. The optimal building insulation level could be affected by either cost minimization or exergy consumption minimization approach. The exergy approach would cause better insulation than cost approach. The influence of energy price on the system selection strategy was discussed. Two photovoltaics (PV) systems—stand alone and grid tied system were compared by the life cycle assessment method. The superiority of the latter one was quite obvious. The analysis also showed that during its life span PV technology was less attractive economically because the electricity price in U.S. and China did not fully reflect the environmental burden associated with it. However if future energy price surges and PV system cost reductions were considered, the technology could be very promising for sustainable buildings in the future.

An Exergy Based Engineering and Economic Analysis of Sustainable Building

To achieve the goal of sustainable development, the building energy system was evaluated from both the first and second law of thermodynamics point of view. The relationship between exergy destruction and sustainable development were discussed at first, followed by the description of the resource abundance model, the life cycle analysis model and the economic investment effectiveness model. By combining the forgoing models, a new sustainable index was proposed. Several green building case studies in U.S. and China were presented. The influences of building function, geographic location, climate pattern, the regional energy structure, and the technology improvement potential of renewable energy in the future were discussed. The building’s envelope, HVAC system, on-site renewable energy system life cycle analysis from energy, exergy, environmental and economic perspective were compared. It was found that climate pattern had a dramatic influence on the life cycle investment effectiveness of the building envelope. The building HVAC system energy performance was much better than its exergy performance. To further increase the exergy efficiency, renewable energy rather than fossil fuel should be used as the primary energy. A building life cycle cost and exergy consumption regression model was set up. The optimal building insulation level could be affected by either cost minimization or exergy consumption minimization approach. The exergy approach would cause better insulation than cost approach. The influence of energy price on the system selection strategy was discussed. Two photovoltaics (PV) systems – stand alone and grid tied system were compared by the life cycle assessment method. The superiority of the latter one was quite obvious. The analysis also showed that during its life span PV technology was less attractive economically because the electricity price in U.S. and China did not fully reflect the environmental burden associated with it. However if future energy price surges and PV system cost reductions were considered, the technology could be very promising for sustainable buildings in the future.

Gaussian Process Kernels for Cross-Spectrum Analysis in Electrophysiological Time Series

Multi-output Gaussian processes provide a convenient framework for multi-task problems. An illustrative and motivating example of a multi-task problem is multi-region electrophysiological time-series data, where experimentalists are interested in both power and phase coherence between channels. Recently, the spectral mixture (SM) kernel was proposed to model the spectral density of a single task in a Gaussian process framework. This work develops a novel covariance kernel for multiple outputs, called the cross-spectral mixture (CSM) kernel. This new, flexible kernel represents both the power and phase relationship between multiple observation channels. The expressive capabilities of the CSM kernel are demonstrated through implementation of 1) a Bayesian hidden Markov model, where the emission distribution is a multi-output Gaussian process with a CSM covariance kernel, and 2) a Gaussian process factor analysis model, where factor scores represent the utilization of cross-spectral neural circuits. Results are presented for measured multi-region electrophysiological data.

The Use of Multi-Criteria Decision Analysis in Performing Alternatives Assessment and Comparative Risk Analysis: The Case Study of Codling Moth Pesticides

Thesis (Ph.D.)--University of Washington, 2016-08

Diversity and path coefficient analysis of Southern African maize hybrids

Detailed knowledge on genetic diversity among germplasm is important for hybrid maize ( Zea mays L.) breeding. The objective of the study was to determine genetic diversity in widely grown hybrids in Southern Africa, and compare effectiveness of phenotypic analysis models for determining genetic distances between hybrids. Fifty hybrids were evaluated at one site with two replicates. The experiment was a randomized complete block design. Phenotypic and genotypic data were analyzed using SAS and Power Marker respectively. There was significant (p < 0.01) variation and diversity among hybrid brands but small within brand clusters. Polymorphic Information Content (PIC) ranged from 0.07 to 0.38 with an average of 0.34 and genetic distance ranged from 0.08 to 0.50 with an average of 0.43. SAH23 and SAH21 (0.48) and SAH33 and SAH3 (0.47) were the most distantly related hybrids. Both single nucleotide polymorphism (SNP) markers and phenotypic data models were effective for discriminating genotypes according to genetic distance. SNP markers revealed nine clusters of hybrids. The 12-trait phenotypic analysis model, revealed eight clusters at 85%, while the five-trait model revealed six clusters. Path analysis revealed significant direct and indirect effects of secondary traits on yield. Plant height and ear height were negatively correlated with grain yield meaning shorter hybrids gave high yield. Ear weight, days to anthesis, and number of ears had highest positive direct effects on yield. These traits can provide good selection index for high yielding maize hybrids. Results confirmed that diversity of hybrids is small within brands and also confirm that phenotypic trait models are effective for discriminating hybrids.