Visualization Resources for Iowa State University and the Iowa DOT: An Automated Design Model to Simulator Converter, November 2012

The creation of three-dimensional (3D) drawings for proposed designs for construction, re-construction and rehabilitation activities are becoming increasingly common for highway designers, whether by department of transportation (DOT) employees or consulting engineers. However, technical challenges exist that prevent the use of these 3D drawings/models from being used as the basis of interactive simulation. Use of driving simulation to service the needs of the transportation industry in the US lags behind Europe due to several factors, including lack of technical infrastructure at DOTs, cost of maintaining and supporting simulation infrastructure—traditionally done by simulation domain experts—and cost and effort to translate DOT domain data into the simulation domain.

Hybrid model of a double-fed induction machine and back-to-back converter

This report details the port interconnection of two subsystems: a power electronics subsystem (a back-to-back AC/AC converter (B2B), coupled to a phase of the power grid), and an electromechanical subsystem (a doubly-fed induction machine (DFIM), coupled mechanically to a flywheel and electrically to the power grid and to a local varying load). Both subsystems have been essentially described in previous reports (deliverables D 0.5 and D 4.3.1), although some previously unpublished details are presented here. The B2B is a variable structure system (VSS), due to the presence of control-actuated switches: however from a modelling and simulation, as well as a control-design, point of view, it is sensible to consider modulated transformers (MTF in the bond-graph language) instead of the pairs of complementary switches. The port-Hamiltonian models of both subsystems are presents and coupled through a power-preserving interconnection, and the Hamiltonian description of the whole system is obtained; detailed bond-graphs of all the subsystems and the complete system are provided.

Energy-based modelling and simulation of the interconnection of a back-to-back converter and a doubly-fed induction machine

This paper describes the port interconnection of two subsystems: a power electronics subsystem (a back-to-back AC/CA converter (B2B), coupled to a phase of the power grid), and an electromechanical subsystem (a doubly-fed induction machine (DFIM). The B2B is a variable structure system (VSS), due to presence of control-actuated switches: however, from a modelling simulation, as well as a control-design, point of view, it is sensible to consider modulated transformers (MTF in the bond graph language) instead of the pairs of complementary switches. The port-Hamiltonian models of both subsystems are presented and, using a power-preserving interconnection, the Hamiltonian description of the whole system is obtained; detailed bond graphs of all subsystems and the complete system are also provided. Using passivity-based controllers computed in the Hamiltonian formalism for both subsystems, the whole model is simulated; simulations are run to rest the correctness and efficiency of the Hamiltonian network modelling approach used in this work.

Investigating university students' adaptation to digital learner course portfolio

Digital learner portfolios are of growing importance in higher education as the sector seeks new teaching-learning-assessment methods which promote students" autonomy as managers of their own virtual learning environment. The purpose of this study was to analyse descriptively the undergraduate students" perceptions, attitudes and behaviour when using an eportfolio to support their learning and assessment in practice based courses at two traditional Spanish universities. The participants were 88 students, who were studying through a blended learning mode. Data were collected through questionnaires: a computer experience survey, another which examined the psychological, pedagogical and technological dimensions of eportfolios use. Further, an individual overall reflection was obtained from each student to help gain an understanding of their experiences of using the eportfolio. A mixed-method analysis was applied in order to study the impact of this technological innovation on students and their satisfaction. The results showed that the students had positive opinions and self-efficiency through the eportfolio as a tool to manage their learning and assessment during a semester, especially from the second month of use. However, the expected impact on their learning was not so significant. Nevertheless, the students emphasised that the eportfolio was valuable as a personal developmental learning tool.

Future revenue models: Transformation from textbooks to digital solutions in the educational publishing industry, Case Sanoma Learning

This study was conducted in order to learn how companies’ revenue models will be transformed due to the digitalisation of its products and processes. Because there is still only a limited number of researches focusing solely on revenue models, and particularly on the revenue model change caused by the changes at the business environment, the topic was initially approached through the business model concept, which organises the different value creating operations and resources at a company in order to create profitable revenue streams. This was used as the base for constructing the theoretical framework for this study, used to collect and analyse the information. The empirical section is based on a qualitative study approach and multiple-case analysis of companies operating in learning materials publishing industry. Their operations are compared with companies operating in other industries, which have undergone comparable transformation, in order to recognise either similarities or contrasts between the cases. The sources of evidence are a literature review to find the essential dimensions researched earlier, and interviews 29 of managers and executives at 17 organisations representing six industries. Based onto the earlier literature and the empirical findings of this study, the change of the revenue model is linked with the change of the other dimen-sions of the business model. When one dimension will be altered, as well the other should be adjusted accordingly. At the case companies the transformation is observed as the utilisation of several revenue models simultaneously and the revenue creation processes becoming more complex.

Open Preservation: Community Approaches to Ensuring Long-Term Access to Digital Collections

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

A service perspective to digital innovation: exploring the emergence of autonomous shipping

Current research describes digital innovation largely similar to product innovation. Digital innovation is seen as an object of coherent activities, however in reality digital innovation results from convergence of variant technologies and those related actors with versatile business goals. To account for the dynamic nature of digital innovation, this study applies a service perspective to digital innovation. The purpose of the study is to understand how digital innovation emerges within a service ecosystem for autonomous shipping. The sub-objectives of this study are to 1) identify what factors motivate and demotivate actors to integrate resources for autonomous shipping, 2) explore the key technology areas to be integrated to realise the autonomous shipping concept, and 3) suggest how the technology areas are combined for mutual value creation within a service eco-system for autonomous shipping. Insights from autonomous driving were also included. This study draws on literatures on service innovation and service-dominant logic. The research was conducted as a qualitative exploratory case study. The data comprise interviews of 18 marine and automotive industry experts, 4 workshops, 4 seminars, and observations as well as various secondary data sources. The findings revealed that the key actors have versatile motivations regarding autonomous shipping. These varied from opportunities for single applications to occupying a central role in an autonomous technology platform. Thus, autonomous shipping can be seen as an umbrella concept comprising multiple levels. In technical terms, the development of the concept of autonomous shipping is largely based on combining existing technology solutions, which are gradually integrated towards more systemic entities comprising areas of the autonomous shipping concept. This study argues that a service perspective embraces the inherently complex and dynamic nature of digital innovation. This is captured in the developed research framework that describes digital innovation emerging on different levels of interaction: 1. strategic relationships for new solutions, 2. new local networks for technology platforms, and 3. global networks for new markets. The framework shows how the business models and motivations of digital innovation actors feed the emergence of digital innovation in overlapping service ecosystems that together comprise an innovation ecosystem for autonomous technologies. Digital innovation managers will benefit from seeing their businesses as part of a larger ecosystem of value co-creating actors. In orchestrating digital innovation within a service ecosystem, it is suggested that managers consider the resources, roles and institutions within the ecosystem. Finally, as autonomous shipping is at its infancy, the topic provides a number of interesting avenues for future research.

Polyphase Implementation of Non-recursive Comb Decimators for Sigma-Delta A/D Converters

In a sigma-delta analog to digital (A/D) As most of the sigma-delta ADC applications require converter, the most computationally intensive block is decimation filters with linear phase characteristics, the decimation filter and its hardware implementation symmetric Finite Impulse Response (FIR) filters are may require millions of transistors. Since these widely used for implementation. But the number of FIR converters are now targeted for a portable application, filter coefficients will be quite large for implementing a a hardware efficient design is an implicit requirement. narrow band decimation filter. Implementing decimation In this effect, this paper presents a computationally filter in several stages reduces the total number of filter efficient polyphase implementation of non-recursive coefficients, and hence reduces the hardware complexity cascaded integrator comb (CIC) decimators for and power consumption [2]. Sigma-Delta Converters (SDCs). The SDCs are The first stage of decimation filter can be operating at high oversampling frequencies and hence implemented very efficiently using a cascade of integrators require large sampling rate conversions. The filtering and comb filters which do not require multiplication or and rate reduction are performed in several stages to coefficient storage. The remaining filtering is performed reduce hardware complexity and power dissipation. either in single stage or in two stages with more complex The CIC filters are widely adopted as the first stage of FIR or infinite impulse response (IIR) filters according to decimation due to its multiplier free structure. In this the requirements. The amount of passband aliasing or research, the performance of polyphase structure is imaging error can be brought within prescribed bounds by compared with the CICs using recursive and increasing the number of stages in the CIC filter. The non-recursive algorithms in terms of power, speed and width of the passband and the frequency characteristics area. This polyphase implementation offers high speed outside the passband are severely limited. So, CIC filters operation and low power consumption. The polyphase are used to make the transition between high and low implementation of 4th order CIC filter with a sampling rates. Conventional filters operating at low decimation factor of '64' and input word length of sampling rate are used to attain the required transition '4-bits' offers about 70% and 37% of power saving bandwidth and stopband attenuation. compared to the corresponding recursive and Several papers are available in literature that deals non-recursive implementations respectively. The same with different implementations of decimation filter polyphase CIC filter can operate about 7 times faster architecture for sigma-delta ADCs. Hogenauer has than the recursive and about 3.7 times faster than the described the design procedures for decimation and non-recursive CIC filters.

Southampton Open Data Service - Talk to Digital Economy Group

This is a talk on the new University Open Data Service, some of the applications it's already being put to, and some of the things we hope to do next.

Drivers and barriers to digital television adoption in Portugal: the perspectives of the TV viewers and other main stakeholders

To understand what are the most significant factors for digital TV adoption by the Portuguese population in the switchover context is the main goal of the research project here presented. In April 26, 2012, the analogue terrestrial television switchoff is planned to occur in Portugal, according to the schedule published by the national telecommunication regulator Anacom. Digital terrestrial TV was launched in the country in April 2009, making Portugal one of the countries with a more ambitious schedule – or risky, depending on the perspective - for the full transition from analogue to digital terrestrial television. In this paper we will start by presenting the research project’s objectives, theoretical framework and research design. Next, we will present first results of the project focused on the barriers and drivers to digital TV adoption from two of the empirical studies which integrate it, namely, the quantitative inquiry administered to a representative sample of the Portuguese population and interviews with main stakeholders in the area of digital TV in Portugal. The perspectives of the television viewers are compared with other main stakeholders in this process. The paper will be concluded with a brief discussion of these results and a brief enumeration of next steps for the project.

Factors affecting regional SMEs progression to Digital Business Ecosystems

SMEs are widely recognized as an important driving force of economic growth, yet, their uptake of ICT is still very low. Tosupport SMEs ICT adoption and to foster regional development, in 2000, the Lisbon Strategy on the Information Society andKnowledge-based economy created a vision for 2010 towards the creation of the European Digital Business Ecosystems(DBE). This paper is positioned within that context and reports upon a project involving 6000 SMEs whose aim was tosupport ICT adoption and to encourage SME networks through the creation of a Regional Business Portal. The papere xplores factors affecting the regional SMEs participating in the DBE. An in-depth longitudinal case study approach was adopted and multiple sources of evidence were used. Many factors affecting SMEs progression to DBE were identified:including people and organization, environmental, diffusion networks, technological, regional and time factors

Targeting medication non-adherence behavior in selected autoimmune diseases: a systematic approach to digital health program development

Background 29 autoimmune diseases, including Rheumatoid Arthritis, gout, Crohn’s Disease, and Systematic Lupus Erythematosus affect 7.6-9.4% of the population. While effective therapy is available, many patients do not follow treatment or use medications as directed. Digital health and Web 2.0 interventions have demonstrated much promise in increasing medication and treatment adherence, but to date many Internet tools have proven disappointing. In fact, most digital interventions continue to suffer from high attrition in patient populations, are burdensome for healthcare professionals, and have relatively short life spans. Objective Digital health tools have traditionally centered on the transformation of existing interventions (such as diaries, trackers, stage-based or cognitive behavioral therapy programs, coupons, or symptom checklists) to electronic format. Advanced digital interventions have also incorporated attributes of Web 2.0 such as social networking, text messaging, and the use of video. Despite these efforts, there has not been little measurable impact in non-adherence for illnesses that require medical interventions, and research must look to other strategies or development methodologies. As a first step in investigating the feasibility of developing such a tool, the objective of the current study is to systematically rate factors of non-adherence that have been reported in past research studies. Methods Grounded Theory, recognized as a rigorous method that facilitates the emergence of new themes through systematic analysis, data collection and coding, was used to analyze quantitative, qualitative and mixed method studies addressing the following autoimmune diseases: Rheumatoid Arthritis, gout, Crohn’s Disease, Systematic Lupus Erythematosus, and inflammatory bowel disease. Studies were only included if they contained primary data addressing the relationship with non-adherence. Results Out of the 27 studies, four non-modifiable and 11 modifiable risk factors were discovered. Over one third of articles identified the following risk factors as common contributors to medication non-adherence (percent of studies reporting): patients not understanding treatment (44%), side effects (41%), age (37%), dose regimen (33%), and perceived medication ineffectiveness (33%). An unanticipated finding that emerged was the need for risk stratification tools (81%) with patient-centric approaches (67%). Conclusions This study systematically identifies and categorizes medication non-adherence risk factors in select autoimmune diseases. Findings indicate that patients understanding of their disease and the role of medication are paramount. An unexpected finding was that the majority of research articles called for the creation of tailored, patient-centric interventions that dispel personal misconceptions about disease, pharmacotherapy, and how the body responds to treatment. To our knowledge, these interventions do not yet exist in digital format. Rather than adopting a systems level approach, digital health programs should focus on cohorts with heterogeneous needs, and develop tailored interventions based on individual non-adherence patterns.