A boy and his toys : technology and gadgetry in the James Bond films

This chapter provides an indepth examination of the history of product placement in the James Bond film series, specifically focusing on the emergence of technology and gadgetry in the series and the impact this had on the number and types of products that were placed in the films.

Thermal performance of composite panels under fire conditions using numerical studies : plasterboards, rockwool, glass fibre and cellulose insulations

In recent times, light gauge steel frame (LSF) wall systems are increasingly used in the building industry. They are usually made of cold-formed and thin-walled steel studs that are fire-protected by two layers of plasterboard on both sides. A composite LSF wall panel system was developed recently, where an insulation layer was used externally between the two plasterboards to improve the fire performance of LSF wall panels. In this research, finite element thermal models of the new composite panels were developed using a finite element program, SAFIR, to simulate their thermal performance under both standard and Eurocode design fire curves. Suitable apparent thermal properties of both the gypsum plasterboard and insulation materials were proposed and used in the numerical models. The developed models were then validated by comparing their results with available standard fire test results of composite panels. This paper presents the details of the finite element models of composite panels, the thermal analysis results in the form of time-temperature profiles under standard and Eurocode design fire curves and their comparisons with fire test results. Effects of using rockwool, glass fibre and cellulose fibre insulations with varying thickness and density were also investigated, and the results are presented in this paper. The results show that the use of composite panels in LSF wall systems will improve their fire rating, and that Eurocode design fires are likely to cause severe damage to LSF walls than standard fires.

Thai family support (TFS) : working with families of young substance users in primary health care

Living with substance users negatively impacts upon family members in many ways, and distress is common. Despite these deep and wide-ranging impacts, supportive interventions for family members in their own right are rarely available. Thailand has substantial and growing problems with substance use, and there is very little support or family members of drug users, especially in community setting. The Thai Family Support (TFS) program was designed for implementation in primary health care units (PCUs) in Thailand. TFS was based on two approaches with existing empirical support in Western contexts—the 5-step method and CRAFT—with adaptations to a Thai setting that included integration with Buddhist practices. Its aims were to increase well-being of family members, reduce mental distress, improve family relationships between family members, and engage substance users in behaviour change. A small-scale randomised controlled trial on TFS with a Delayed Treatment control was conducted, with assessments at 8 weeks (Post 1) and 20-24 weeks (Post 2). Structured interviews with participants and PCU staff and an examination of five case studies augmented the quantitative results. Mixed Model Analyses were applied to quantitative outcomes, and thematic analysis was used for qualitative data. Thirty-six participants (18 in each of Immediate and Delayed Conditions) were recruited. A significant difference at Baseline between the two conditions was observed on the Thai GHQ-28 and Gender, but it was not possible to statistically control for these effects. There was a significant Time by Condition interaction on the Thai GHQ-28, WHOQOL-BREF-THAI and FAS, reflecting greater improvements in the Immediate condition by Post 1, but with the Delayed condition meeting or exceeding that effect by Post 2. On FES Cohesion and Conflict, there were falls across conditions at Post 2, but only Cohesion also showed a Time by Condition interaction, and that effect was consistent with a delayed impact of treatment. Overall, TFS by PCU staff in the Delayed Condition gave similar results to TFS conducted by the researcher, supporting the viability of its dissemination to standard health services. Qualitative data also confirmed the quantitative results. Most participants reported physiological and psychological improvements even though their substance-using relative did not change their drug use behaviour. After completing TFS, participants reported increased knowledge, group support and sharing feeling, having positive patient-professional relationship, having greater knowledge of substance abuse and social support. In particular, they changed their behaviour towards the substance user, resulting in improvements to family relationships. PCU staff gave similar responses on the efficacy of TFS, and saw it as feasible for routine use, although some implementation challenges were identified. The cultural adaptation and in particular the religious activities, were recognised by participants and PCU staff as an important component of TFS to support psychological health and well-being. Findings from this study showed the impact of substance use on family members and difficulties that they experienced when living with the substance users, resulting distresses and burden that may develop severe mental health disease. Drug use policies should be modified to support family members and response to their needs effectively for early prevention. This study also gave preliminary support for application of the TFS program in rural primary care settings and identified some policies that will be required for it to be disseminated more broadly.

Towards more systematic Twitter analysis : metrics for tweeting activities

Twitter is an important and influential social media platform, but much research into its uses remains centred around isolated cases – e.g. of events in political communication, crisis communication, or popular culture, often coordinated by shared hashtags (brief keywords, prefixed with the symbol ‘#’). In particular, a lack of standard metrics for comparing communicative patterns across cases prevents researchers from developing a more comprehensive perspective on the diverse, sometimes crucial roles which hashtags play in Twitter-based communication. We address this problem by outlining a catalogue of widely applicable, standardised metrics for analysing Twitter-based communication, with particular focus on hashtagged exchanges. We also point to potential uses for such metrics, presenting an indication of what broader comparisons of diverse cases can achieve.

e-Technology v t-Engagement : a snapshot of Australia's digital economy readiness

Before e-Technology’s effects on users can be accurately measured, those users must be fully engaged with the relevant systems and services. That is they must be able to function as part of the digital economy. The paper refers to this ‘user functionality’ as t-Engagement. Not all users are t-Engaged and in many instances achieving t-Engagement will require assistance from external sources. This paper identifies the current state of Australia’s regional digital economy readiness and highlights the role of Local Government Authorities (‘LGAs’) in enabling t-Engagement. The paper analyses responses to the 2012 BTA, NBN and Digital Economy Survey by LGA and other regional organizations within Australia. The paper’s particular focus is on the level of use by Local Government Authorities of federal, state and other programs designed to enable t-Engagement. The analysis confirms the role of LGAs in enabling t-Engagement and in promoting Australia’s digital economy. The paper concludes by reinforcing the need to ensure ongoing meaningful federal and State support of regional initiatives, as well as identifying issues requiring specific attention.

Improving the usability of standard schemas

Due to the development of XML and other data models such as OWL and RDF, sharing data is an increasingly common task since these data models allow simple syntactic translation of data between applications. However, in order for data to be shared semantically, there must be a way to ensure that concepts are the same. One approach is to employ commonly usedschemas—called standard schemas —which help guarantee that syntactically identical objects have semantically similar meanings. As a result of the spread of data sharing, there has been widespread adoption of standard schemas in a broad range of disciplines and for a wide variety of applications within a very short period of time. However, standard schemas are still in their infancy and have not yet matured or been thoroughly evaluated. It is imperative that the data management research community takes a closer look at how well these standard schemas have fared in real-world applications to identify not only their advantages, but also the operational challenges that real users face. In this paper, we both examine the usability of standard schemas in a comparison that spans multiple disciplines, and describe our first step at resolving some of these issues in our Semantic Modeling System. We evaluate our Semantic Modeling System through a careful case study of the use of standard schemas in architecture, engineering, and construction, which we conducted with domain experts. We discuss how our Semantic Modeling System can help the broader problem and also discuss a number of challenges that still remain.

Link discovery for Chinese/English cross-language web information retrieval

Nowadays people heavily rely on the Internet for information and knowledge. Wikipedia is an online multilingual encyclopaedia that contains a very large number of detailed articles covering most written languages. It is often considered to be a treasury of human knowledge. It includes extensive hypertext links between documents of the same language for easy navigation. However, the pages in different languages are rarely cross-linked except for direct equivalent pages on the same subject in different languages. This could pose serious difficulties to users seeking information or knowledge from different lingual sources, or where there is no equivalent page in one language or another. In this thesis, a new information retrieval task—cross-lingual link discovery (CLLD) is proposed to tackle the problem of the lack of cross-lingual anchored links in a knowledge base such as Wikipedia. In contrast to traditional information retrieval tasks, cross language link discovery algorithms actively recommend a set of meaningful anchors in a source document and establish links to documents in an alternative language. In other words, cross-lingual link discovery is a way of automatically finding hypertext links between documents in different languages, which is particularly helpful for knowledge discovery in different language domains. This study is specifically focused on Chinese / English link discovery (C/ELD). Chinese / English link discovery is a special case of cross-lingual link discovery task. It involves tasks including natural language processing (NLP), cross-lingual information retrieval (CLIR) and cross-lingual link discovery. To justify the effectiveness of CLLD, a standard evaluation framework is also proposed. The evaluation framework includes topics, document collections, a gold standard dataset, evaluation metrics, and toolkits for run pooling, link assessment and system evaluation. With the evaluation framework, performance of CLLD approaches and systems can be quantified. This thesis contributes to the research on natural language processing and cross-lingual information retrieval in CLLD: 1) a new simple, but effective Chinese segmentation method, n-gram mutual information, is presented for determining the boundaries of Chinese text; 2) a voting mechanism of name entity translation is demonstrated for achieving a high precision of English / Chinese machine translation; 3) a link mining approach that mines the existing link structure for anchor probabilities achieves encouraging results in suggesting cross-lingual Chinese / English links in Wikipedia. This approach was examined in the experiments for better, automatic generation of cross-lingual links that were carried out as part of the study. The overall major contribution of this thesis is the provision of a standard evaluation framework for cross-lingual link discovery research. It is important in CLLD evaluation to have this framework which helps in benchmarking the performance of various CLLD systems and in identifying good CLLD realisation approaches. The evaluation methods and the evaluation framework described in this thesis have been utilised to quantify the system performance in the NTCIR-9 Crosslink task which is the first information retrieval track of this kind.

Visioning technology-based simulated learning environments in the social work curriculum

This report, prepared by QUT Social Work and Human Services, in collaboration with key sector stakeholders, identifies the current and potentially expanded uses of Simulated Learning Environments (SLE) as part of the Health Workforce Australia (HWA) National Project. An expert Reference Group guided the project, facilitated the data collection, and provided feedback and support on the findings and broad recommendations.

A banded preconditioner for the two-sided, nonlinear space-fractional diffusion equation

The method of lines is a standard method for advancing the solution of partial differential equations (PDEs) in time. In one sense, the method applies equally well to space-fractional PDEs as it does to integer-order PDEs. However, there is a significant challenge when solving space-fractional PDEs in this way, owing to the non-local nature of the fractional derivatives. Each equation in the resulting semi-discrete system involves contributions from every spatial node in the domain. This has important consequences for the efficiency of the numerical solver, especially when the system is large. First, the Jacobian matrix of the system is dense, and hence methods that avoid the need to form and factorise this matrix are preferred. Second, since the cost of evaluating the discrete equations is high, it is essential to minimise the number of evaluations required to advance the solution in time. In this paper, we show how an effective preconditioner is essential for improving the efficiency of the method of lines for solving a quite general two-sided, nonlinear space-fractional diffusion equation. A key contribution is to show, how to construct suitable banded approximations to the system Jacobian for preconditioning purposes that permit high orders and large stepsizes to be used in the temporal integration, without requiring dense matrices to be formed. The results of numerical experiments are presented that demonstrate the effectiveness of this approach.

Spatial and temporal foraging patterns of Queensland fruit fly, Bactrocera tryoni(Froggatt) (Diptera: Tephritidae), for protein and implications for management

Fruit flies require protein for reproductive development and actively feed upon protein sources in the field. Liquid protein baits mixed with insecticide are used routinely to manage pest fruit flies, such as Bactrocera tryoni (Froggatt). However, there are still some gaps in the underpinning science required to improve the efficacy of bait spray technology. The spatial and temporal foraging behaviour of B. tryoni in response to protein was investigated in the field. A series of linked trials using either wild flies in the open field or laboratory-reared flies in field cages and a netted orchard were undertaken using nectarines and guavas. Key questions investigated were the fly's response to protein relative to: height of protein within the canopy, fruiting status of the tree, time of day, season and size of the experimental arena. Canopy height had a significant response on B. tryoni foraging, with more flies foraging on protein in the mid to upper canopy. Fruiting status also had a significant effect on foraging, with most flies responding to protein when applied to fruiting hosts. B. tryoni demonstrated a repeatable diurnal response pattern to protein, with the peak response being between 12:00–16:00 h. Season showed significant but unpredictable effects on fruit fly response to protein in the subtropical environment where the work was undertaken. Relative humidity, but not temperature or rainfall, was positively correlated with protein response. The number of B. tryoni responding to protein decreased dramatically as the spatial scale increased from field cage through to the open field. Based on these results, it is recommend that, to be most effective, protein bait sprays should be applied to the mid to upper canopies of fruiting hosts. Overall, the results show that the protein used, an industry standard, has very low attractancy to B. tryoni and that further work is urgently needed to develop more volatile protein baits.

A snapshot of radiation therapy techniques and technology in Queensland : an aid to mapping undergraduate curriculum

Introduction: Undergraduate students studying the Bachelor of Radiation Therapy at Queensland University of Technology (QUT) attend clinical placements in a number of department sites across Queensland. To ensure that the curriculum prepares students for the most common treatments and current techniques in use in these departments, a curriculum matching exercise was performed. Methods: A cross-sectional census was performed on a pre-determined “Snapshot” date in 2012. This was undertaken by the clinical education staff in each department who used a standardized proforma to count the number of patients as well as prescription, equipment, and technique data for a list of tumour site categories. This information was combined into aggregate anonymized data. Results: All 12 Queensland radiation therapy clinical sites participated in the Snapshot data collection exercise to produce a comprehensive overview of clinical practice on the chosen day. A total of 59 different tumour sites were treated on the chosen day and as expected the most common treatment sites were prostate and breast, comprising 46% of patients treated. Data analysis also indicated that intensity-modulated radiotherapy (IMRT) use is relatively high with 19.6% of patients receiving IMRT treatment on the chosen day. Both IMRT and image-guided radiotherapy (IGRT) indications matched recommendations from the evidence. Conclusion: The Snapshot method proved to be a feasible and efficient method of gathering useful

Daylighting design and simulation : ease of use analysis of digital tools for architects

Good daylighting design in buildings not only provides a comfortable luminous environment, but also delivers energy savings and comfortable and healthy environments for building occupants. Yet, there is still no consensus on how to assess what constitutes good daylighting design. Currently amongst building performance guidelines, Daylighting factors (DF) or minimum illuminance values are the standard; however, previous research has shown the shortcomings of these metrics. New computer software for daylighting analysis contains new more advanced metrics for daylighting (Climate Base Daylight Metrics-CBDM). Yet, these tools (new metrics or simulation tools) are not currently understood by architects and are not used within architectural firms in Australia. A survey of architectural firms in Brisbane showed the most relevant tools used by industry. The purpose of this paper is to assess and compare these computer simulation tools and new tools available architects and designers for daylighting. The tools are assessed in terms of their ease of use (e.g. previous knowledge required, complexity of geometry input, etc.), efficiency (e.g. speed, render capabilities, etc.) and outcomes (e.g. presentation of results, etc. The study shows tools that are most accessible for architects, are those that import a wide variety of files, or can be integrated into the current 3d modelling software or package. These software’s need to be able to calculate for point in times simulations, and annual analysis. There is a current need in these software solutions for an open source program able to read raw data (in the form of spreadsheets) and show that graphically within a 3D medium. Currently, development into plug-in based software’s are trying to solve this need through third party analysis, however some of these packages are heavily reliant and their host program. These programs however which allow dynamic daylighting simulation, which will make it easier to calculate accurate daylighting no matter which modelling platform the designer uses, while producing more tangible analysis today, without the need to process raw data.

Principals, Teachers, and Student's Perception of the Information and Communication Technology in Kuwait Secondary Schools (Rhetoric and reality)

ICT integration has been advocated to provide opportunities to improve students’ achievement and engagement through transforming the educational setting. A valuable tool that contributes in enhancing and developing students’ cognitive skills for lifelong learning, ICT integration has introduced a new educational philosophy, shifting the role of students into a more central position in the pedagogical processes. Kuwait, as with many other countries, has recently planned ICT integration to develop its citizen’s capacities. This study sought to capture the principals’, teachers’, and students’ perceptions of ICT integration in pedagogical activities, as well as how ICT is being used for learning and teaching activities in three ICT leading Kuwaiti secondary schools. Interviews with principals, teachers, and students were conducted, along with an open-ended questionnaire for the teachers, researcher observations, and document analysis. The findings revealed that ICT integration in Kuwait needed to be reinforced to accomplish the ICT integration objectives. A call for further support for teachers, and a reconsideration of the ICT integration strategies were also recommended.

Innovative Leadership by School Principals : embedding Information Communication and Technology in Kuwaiti Schools

Kuwait is an oil rich country planning for a future that is not dependent on exploiting natural resources. A major policy initiative has been the introduction of Information Communication and Technology (ICT) to schools. However, contextual issues and teacher capabilities in the use of ICT have limited the success of this initiative. The study examines the leadership strategies of two secondary school principals whose schools have achieved this goal. The case study draws on intensive data collected through interviews of the principals, and teachers supported by document analysis and observations. Analysis was guided by theoretical perspectives drawn from the literature which identified a range of strategies used by the principals to manage change. The principals of Schools A and B employed three key strategies to maximise the impact on the teaching staff incorporating ICT into their teaching and learning practices. These strategies were: (a) encouragement for teaching staff to implement ICT in their teaching; (b) support to meet the material and human needs of teaching staff using ICT; and (c) provision of instructions and guidance for teaching staff in how and why such behaviours and practices should be performed. The outcome of this study proposes an innovative change leadership model that informs emerging countries, which are also undergoing major change related to ICT. However, the study also revealed limitations in the implementation of ICT in the classroom and provides insights into further strategies that principals need to adopt.

Higher degree research at Australian Universities : Responding to diversity in engineering and information technology

BACKGROUND There is increasing enrolment of international students in the Engineering and Information Technology disciplines and anecdotal evidence of a need for additional understanding and support for these students and their supervisors due to differences both in academic and social cultures. While there is a growing literature on supervisory styles and guidelines on effective supervision, there is little on discipline-specific, cross-cultural supervision responding to the growing diversity. In this paper, we report findings from a study of Engineering and Information technology Higher Degree Research (HDR)students and supervision in three Australian universities. PURPOSE The aim was to assess perceptions of students and supervisors of factors influencing success that are particular to international or culturally and linguistically diverse (CaLD) HDR students in Engineering and Information technology. DESIGN/METHOD Online survey and qualitative data was collected from international and CaLD HDR students and supervisors at the three universities. Bayesian network analysis, inferential statistics, and qualitative analysis provided the main findings. RESULTS Survey results indicate that both students and supervisors are positive about their experiences, and do not see language or culture as particularly problematic. The survey results also reveal strong consistency between the perceptions of students and supervisors on most factors influencing success. Qualitative analysis of critical supervision incidents has provided rich data that could help improve support services. CONCLUSIONS In contrast with anecdotal evidence, HDR completion data from the three universities reveal that international students, on average, complete in shorter time periods than domestic students. The analysis suggests that success is linked to a complex set of factors involving the student, supervision, the institution and broader community.