Eco-retrofitting - from managerialism to design

As all environmental problems are caused by human systems of design, sustainability can be seen as a design problem. Given the massive energy and material flows through the built environment, sustainability simply cannot be achieved without the re-design of our urban areas. ‘Eco-retrofitting’, as used here, means modifying buildings and/or urban areas to create net positive social and environmental impacts – both on site and off site. While this has probably not been achieved anywhere as yet, myriad but untapped eco-solutions are already available which could be up-scaled to the urban level. It is now well established that eco-retrofitting buildings and cities with appropriate design technology can pay for itself through lower health costs, productivity increases and resource savings. Good design would also mean happier human and ecological communities at a much lower cost over time. In fact, good design could increase life quality and the life support services of nature while creating sustainable‘economic’growth. The impediments are largely institutional and intellectual, which can be encapsulated in the term ‘managerial’. There are, however, also systems design solutions to the managerial obstacles that seem to be stalling the transition to sustainable systems designs. Given the sustainability imperative, then, why is the adoption of better management systems so slow? The oral presentation will show examples of ways in which built environment design can create environments that not only reduce the ongoing damage of past design, but could theoretically generate net positive social and ecological outcomes over their life cycle. These illustrations show that eco-retrofitting could cost society less than doing nothing - especially given the ongoing renovations of buildings - but for managerial hurdles. The paper outlines on how traditional managerial approaches stand in the way of ‘design for ecosystem services’, and list some management solutions that have long been identified, but are not yet widely adopted. Given the pervasive nature of these impediments and their alternatives, they are presented by way of examples. A sampling of eco-retrofitting solutions are also listed to show that ecoretrofitting is a win-win-win solution that stands ready to be implemented by people having management skills and/or positions of influence.

Daylighting design in the architectural design studio

This paper discusses two different approaches to teaching design and their modes of delivery and reflects upon their successes and failures. Two small groups of third year design students have been given projects focussing on incorporation of daylighting to architectural design in studios having different design themes. In association with the curriculum, the themes were Digital Tools and Sustainability. Although both studios had the topic of daylighting, the aim and methodology used were different. Digital Tool studio’s aim was to teach how to design daylighting by using a digital tool, where as, Sustainability studio aimed at using scale modelling as a tool to learn about daylighting and integrating it into design. Positive results for providing student learning success within the University context were the students’ chance to learn and practice some new skills –using a new tool for designing; integration of the tutors’ extensive research expertise to their teaching practice; and the students’ construction of their own understanding of knowledge in a student-centred educational environment. This environment created a very positive attitude in the form of exchanging ideas and collaboration among the students of Digital Tools students at the discussion forum. Sustainability group students were enthusiastic about designing and testing various proposals. Problems that both studios experienced were mainly related to timing. Synchronizing with other groups of their studios and learning of a new skill on top of an already complicated process of design learning were the setbacks.

Modeling web search : preliminary results

This paper reports preliminary results from a study modeling the interplay between multitasking, cognitive coordination, and cognitive shifts during Web search. Study participants conducted three Web searches on personal information problems. Data collection techniques included pre- and post-search questionnaires; think-aloud protocols, Web search logs, observation, and post-search interviews. Key findings include: (1) users Web searches included multitasking, cognitive shifting and cognitive coordination processes, (2) cognitive coordination is the hinge linking multitasking and cognitive shifting that enables Web search construction, (3) cognitive shift levels determine the process of cognitive coordination, and (4) cognitive coordination is interplay of task, mechanism and strategy levels that underpin multitasking and task switching. An initial model depicts the interplay between multitasking, cognitive coordination, and cognitive shifts during Web search. Implications of the findings and further research are also discussed.

Behaviour and design of cold-formed steel compression members at elevated temperatures

Cold-formed steel members have been widely used in residential, industrial and commercial buildings as primary load bearing structural elements and non-load bearing structural elements (partitions) due to their advantages such as higher strength to weight ratio over the other structural materials such as hot-rolled steel, timber and concrete. Cold-formed steel members are often made from thin steel sheets and hence they are more susceptible to various buckling modes. Generally short columns are susceptible to local or distortional buckling while long columns to flexural or flexural-torsional buckling. Fire safety design of building structures is an essential requirement as fire events can cause loss of property and lives. Therefore it is essential to understand the fire performance of light gauge cold-formed steel structures under fire conditions. The buckling behaviour of cold-formed steel compression members under fire conditions is not well investigated yet and hence there is a lack of knowledge on the fire performance of cold-formed steel compression members. Current cold-formed steel design standards do not provide adequate design guidelines for the fire design of cold-formed steel compression members. Therefore a research project based on extensive experimental and numerical studies was undertaken at the Queensland University of Technology to investigate the buckling behaviour of light gauge cold-formed steel compression members under simulated fire conditions. As the first phase of this research, a detailed review was undertaken on the mechanical properties of light gauge cold-formed steels at elevated temperatures and the most reliable predictive models for mechanical properties and stress-strain models based on detailed experimental investigations were identified. Their accuracy was verified experimentally by carrying out a series of tensile coupon tests at ambient and elevated temperatures. As the second phase of this research, local buckling behaviour was investigated based on the experimental and numerical investigations at ambient and elevated temperatures. First a series of 91 local buckling tests was carried out at ambient and elevated temperatures on lipped and unlipped channels made of G250-0.95, G550-0.95, G250-1.95 and G450-1.90 cold-formed steels. Suitable finite element models were then developed to simulate the experimental conditions. These models were converted to ideal finite element models to undertake detailed parametric study. Finally all the ultimate load capacity results for local buckling were compared with the available design methods based on AS/NZS 4600, BS 5950 Part 5, Eurocode 3 Part 1.2 and the direct strength method (DSM), and suitable recommendations were made for the fire design of cold-formed steel compression members subject to local buckling. As the third phase of this research, flexural-torsional buckling behaviour was investigated experimentally and numerically. Two series of 39 flexural-torsional buckling tests were undertaken at ambient and elevated temperatures. The first series consisted 2800 mm long columns of G550-0.95, G250-1.95 and G450-1.90 cold-formed steel lipped channel columns while the second series contained 1800 mm long lipped channel columns of the same steel thickness and strength grades. All the experimental tests were simulated using a suitable finite element model, and the same model was used in a detailed parametric study following validation. Based on the comparison of results from the experimental and parametric studies with the available design methods, suitable design recommendations were made. This thesis presents a detailed description of the experimental and numerical studies undertaken on the mechanical properties and the local and flexural-torsional bucking behaviour of cold-formed steel compression member at ambient and elevated temperatures. It also describes the currently available ambient temperature design methods and their accuracy when used for fire design with appropriately reduced mechanical properties at elevated temperatures. Available fire design methods are also included and their accuracy in predicting the ultimate load capacity at elevated temperatures was investigated. This research has shown that the current ambient temperature design methods are capable of predicting the local and flexural-torsional buckling capacities of cold-formed steel compression members at elevated temperatures with the use of reduced mechanical properties. However, the elevated temperature design method in Eurocode 3 Part 1.2 is overly conservative and hence unsuitable, particularly in the case of flexural-torsional buckling at elevated temperatures.

Fast reconstruction of aerodynamic shapes using evolutionary algorithms and virtual Nash strategies in a CFD design environment

This paper compares the performances of two different optimisation techniques for solving inverse problems; the first one deals with the Hierarchical Asynchronous Parallel Evolutionary Algorithms software (HAPEA) and the second is implemented with a game strategy named Nash-EA. The HAPEA software is based on a hierarchical topology and asynchronous parallel computation. The Nash-EA methodology is introduced as a distributed virtual game and consists of splitting the wing design variables - aerofoil sections - supervised by players optimising their own strategy. The HAPEA and Nash-EA software methodologies are applied to a single objective aerodynamic ONERA M6 wing reconstruction. Numerical results from the two approaches are compared in terms of the quality of model and computational expense and demonstrate the superiority of the distributed Nash-EA methodology in a parallel environment for a similar design quality.

The present via the past : an archaelogical approach to analysing the design and use of a contemporary urban village

This research applies an archaeological lens to an inner-city master planned development in order to investigate the tension between the design of space and the use of space. The chosen case study for this thesis is Kelvin Grove Urban Village (KGUV), located in inner city Brisbane, Australia. The site of this urban village has strong links to the past. KGUV draws on both the history of the place in particular along with more general mythologies of village life in its design and subsequent marketing approaches. The design and marketing approach depends upon notions of an imagined past where life in a place shaped like a traditional village was better and more socially sustainable than modern urban spaces. The appropriation of this urban village concept has been criticised as a shallow marketing ploy. The translation and applicability of the urban village model across time and space is therefore contentious. KGUV was considered both in terms of its design and marketing and in terms of a reading of the actual use of this master planned place. Central to this analysis is the figure of the boundary and related themes of social heterogeneity, inclusion and exclusion. The refraction of history in the site is also an important theme. An interpretive archaeological approach was used overall as a novel method to derive this analysis.

Designing the Future

While there have been improvements in Australian engineering education since the 1990s, there are still strong concerns that more progress needs to be made, particularly in the areas of developing graduate competencies and in outcomes-based curricula. This paper reports on the findings from a two-day ALTC-funded forum that sought to establish a shared understanding with the 3 stakeholders (students, academics and industry) about how to achieve a design-based engineering curriculum. This paper reports on the findings from the first day’s activities and reveals that there is a shared desire for design and project-based curricula that would encourage the development of the ‘three-dimensional’ graduate: one who has technical, personal and professional and systems-thinking/design-based competence.

Graduate Attribute Mapping With the Extended CDIO Framework

The CDIO (Conceive-Design-Implement-Operate) Initiative has been globally recognised as an enabler for engineering education reform. With the CDIO process, the CDIO Standards and the CDIO Syllabus, many scholarly contributions have been made around cultural change, curriculum reform and learning environments. In the Australasian region, reform is gaining significant momentum within the engineering education community, the profession, and higher education institutions. This paper presents the CDIO Syllabus cast into the Australian context by mapping it to the Engineers Australia Graduate Attributes, the Washington Accord Graduate Attributes and the Queensland University of Technology Graduate Capabilities. Furthermore, in recognition that many secondary schools and technical training institutions offer introductory engineering technology subjects, this paper presents an extended self-rating framework suited for recognising developing levels of proficiency at a preparatory level. A demonstrator mapping tool has been created to demonstrate the application of this extended graduate attribute mapping framework as a precursor to an integrated curriculum information model.

Addressing Challenges for Internationalisation and Mobility in Engineering Through CDIO Standards

There is a growing need for international transparency of engineering qualifications, and mechanisms to support and facilitate student mobility. In response, there are a number of global initiatives attempting to address these needs, particularly in Europe, North America and Australia. The Conceive-Design-Implement-Operate (CDIO) Initiative has a set of standards, competencies, and proficiency levels developed through a global community of practice. It is a well-structured framework in which best-practice internationalisation and student mobility can be embedded. However, the current 12 CDIO Standards do not address international qualifications or student mobility. Based on an environmental scan of global activities, the underpinning principles of best practice are identified and form the basis of the proposed 13th CDIO Standard — “Internationalization and Mobility”.

An examination of the knowledge barriers in participatory design and the prospects for embedded research

Participatory design has the moral and pragmatic tenet of including those who will be most affected by a design into the design process. However, good participation is hard to achieve and results linking project success and degree of participation are inconsistent. Through three case studies examining some of the challenges that different properties of knowledge – novelty, difference, dependence – can impose on the participatory endeavour we examine some of the consequences to the participatory process of failing to bridge across knowledge boundaries – syntactic, semantic, and pragmatic. One pragmatic consequence, disrupting the user’s feeling of involvement to the project, has been suggested as a possible explanation for the inconsistent results linking participation and project success. To aid in addressing these issues a new form of participatory research, called embedded research, is proposed and examined within the framework of the case studies and knowledge framework with a call for future research into its possibilities.

Asynchronicity and the ‘time envelope’ of online annotation : the case of the photosharing website, Flickr

This paper examines a sequence of asynchronous interaction on the photosharing website, Flickr. In responding to a call for a focus on the performative aspects of online annotation (Wolff & Neuwirth, 2001), we outline and apply an interaction order approach to identify temporal and cultural aspects of the setting that provide for commonality and sharing. In particular, we study the interaction as a feature of a synthetic situation (Knorr Cetina, 2009) focusing on the requirements of maintaining a sense of an ongoing discussion online. Our analysis suggests that the rhetorical system of the Flickr environment, its appropriation by participants as a context for bounded activities, and displays of commonality, affiliation, and shared access provide for a common sense of participation in a time envelope. This, in turn, is argued to be central to new processes of consociation (Schutz, 1967; Zhao, 2004) occurring in the life world of Web 2.0 environments.

A conceptual framework for a systematic mapping of layout design principles by using Yin and Yang theory

There are various principles for layout design such as balance, rhythm, unity and harmony, but each principle has often been introduced as a separate concept rather than within an integrated and systematic structure, so that designers and design students have to keep practices for the acquisition of skills. The paper seeks to develop a conceptual framework for a systematic mapping of layout design principles by using Yin and Yang and the Five Elements. Yin and Yang theory explains all natural phenomena with its own conceptual model and facilitates finding harmony and balance between the visual elements in terms of systematic and organic relations. Most common and well-known layout design principles are defined with 10 different resources such as design books and articles, and have been remapped following with the structure of Yin and Yang and the Five Elements. A systematic framework explaining the relationships of design principles was created and 32 design students participated in its efficiency test. The outcome suggests there is a high possibility that the framework can be used in professional fields and design education.

The Quality of Interface Design for Educational Courseware Development in Malaysian Educational Context

Interactive educational courseware has been adopted in diverse education sectors such as primary, secondary, tertiary education, vocational and professional training. In Malaysian educational context, the ministry of education has implemented Smart School Project that aims to increase high level of academic achievement in primary and secondary schools by using interactive educational courseware. However, many researchers have reported that many coursewares fail to accommodate the learner and teacher needs. In particular, the interface design is not appropriately designed in terms of quality of learning. This paper reviews educational courseware development process in terms of defining quality of interface design and suggests a conceptual model of interface design through the integration of design components and interactive learning experience into the development process. As a result, it defines the concept of interactive learning experience in a more practical approach in order to implement each stage of the development process in a seamless and integrated way.

The understanding of avatar design : various types and styles of avatars and the design considerations

People have adopted various formats of media such as graphics, photo and text (nickname) in order to represent themselves when communicate with others online. Avatar is known as a visual form representing a user oneself and one's identity wished. Its form can vary from a two-dimensional model to a three-dimensional model, and can be visualised with various visual forms and styles. In general, two-dimensional images including an animated image are used in online forum communities and live chat software; while three-dimensional models are often used in computer games. Avatar design is often regarded as a graphic designer's visual image creation or a user's output based on one's personal preference, yet it often causes the avatar design having no consideration of its practical visual design and users' interactive communication experience aspects. This paper will review various types and styles of avatar and discuss about avatar design from visual design and online user experience perspectives. It aims to raise a design discourse in avatar design and build up a well-articulated set of design principles for effective avatar design.