A Summative Evaluation of the Stronger Smarter Learning Communities Project : Vol 1 and Vol 2

This is a summative evaluation of the Stronger Smarter Learning Communities (SSLC) project that examines whether and how the SSLC project had an impact on Australian state schools which adopted its models and approaches. Drawing from qualitative and quantitative data sets, it also presents the largest scale and most comprehensive analysis of Indigenous education practices and outcomes to date. It includes empirical findings on: success in changing school ethos and community engagement; challenges in progress at closure of the 'gap' in conventionally measured achievement and performance; schools' and principals' choices in curriculum and instruction; profiles of teachers' and principals' training and views on teacher education; and a strong emphasis on community and school Indigenoous voices and views on Indigenous education.

Pt/TiO2 nanotubes/SiC schottky diodes for hydrogen gas sensing applications

Titanium oxide nanotubes Schottky diodes were fabricated for hydrogen gas sensing applications. The TiO2 nanotubes were synthesized via anodization of RF sputtered titanium films on SiC substrates. Two anodization potentials of 5 V and 20 V were used. Scanning electron microscopy of the synthesized films revealed nanotubes with avarage diameters of 20 nm and 75 nm. X-ray diffraction analysis revealed that the composition of the oxide varied with the anodization potential. TiO2 (anatase) being formed preferentially at 5 V and TiO (no anatase) at 20 V. Current-voltage characteristics of the diodes were studied towards hydrogen at temperatures from 25°C to 250°C. At constant current bias of −500 μA and 250°C, the lateral voltage shifts of 800 mV and 520 mV were recorded towards 1% hydrogen for the 5 V and 20 V anodized nanotubes, respectively.

Electrospinning and additive manufacturing : converging technologies

A well-engineered scaffold for regenerative medicine, which is suitable to be translated from the bench to the bedside, combines inspired design, technical innovation and precise craftsmanship. Electrospinning and additive manufacturing are separate approaches to manufacturing scaffolds for a variety of tissue engineering applications. A need to accurately control the spatial distribution of pores within scaffolds has recently resulted in combining the two processing methods, to overcome shortfalls in each technology. This review describes where electrospinning and additive manufacturing are used together to generate new porous structures for biological applications.

iRAP Malaysia training course: Decade of Action for Road Safety. Report to Department of Foreign Affairs and Trade, Australia-Malaysia Institute

The International Road Assessment Program (iRAP) is a not-for-profit organisation that works in partnership with governments and non-government organisations in all parts of the world to make roads safe. The iRAP Malaysia pilot study on 3,700km of road identified the potential to save 31,800 deaths and serious injuries over the next 20 years from proven engineering improvements. To help ensure the iRAP data and results are available to planners and engineers, iRAP, together with staff from the Centre for Accident Research and Road Safety – Queensland (CARRS-Q) and the Malaysian Institute of Road Safety Research (MIROS) developed a 5-day iRAP training course that covers the background, theory and practical application of iRAP protocols, with a special focus on Malaysian case studies. Funding was provided by a competitive grant from the Australian-Malaysia Institute.

Designing an information accountability framework for eHealth

This tutorial is primarily based on the IEEE eHealth technical committee Newsletter published in March 2013. Its main focus is on information privacy management in eHealth through information accountability. The tutorial consists of three main aspects of a proposed information accountability framework for eHealth, namely, social aspects, technical aspects and legal aspects. Following a brief introduction of the problem domain and context, we present the tutorial in these three main components. The length of the tutorial is intended to be half a day.

Implementation guide for surveillance of Clostridium difficile infection

The Implementation Guide for hospital surveillance of Clostridium difficile infection (CDI) has been produced by the Healthcare Associated Infection (HAI) Technical Working Group of the Australian Commission on Safety and Quality in Health Care (ACSQHC), and endorsed by the HAI Advisory Group. State jurisdictions and the ACSQHC have representatives on the Technical Working Group, and have had input into this document. The Guide is intended to be used by Australian hospitals and organisations to support the implementation of hospital-identified Clostridium difficile infection (CDI) surveillance using the endorsed case definition in this guide. It has been produced to support consistency of surveillance activities and is not intended to replace clinical assessment of infection for patient management.

Nurse-led trials of medical devices: General principles and good practice

Aim To provide an overview of key governance matters relating to medical device trials and practical advice for nurses wishing to initiate or lead them. Background Medical device trials, which are formal research studies that examine the benefits and risks of therapeutic, non-drug treatment medical devices, have traditionally been the purview of physicians and scientists. The role of nurses in medical device trials historically has been as data collectors or co-ordinators rather than as principal investigators. Nurses more recently play an increasing role in initiating and leading medical device trials. Review Methods A review article of nurse-led trials of medical devices. Discussion Central to the quality and safety of all clinical trials is adherence to the International Conference on Harmonization Guidelines for Good Clinical Practice, which is the internationally-agreed standard for the ethically- and scientifically-sound design, conduct and monitoring of a medical device trial, as well as the analysis, reporting and verification of the data derived from that trial. Key considerations include the class of the medical device, type of medical device trial, regulatory status of the device, implementation of standard operating procedures, obligations of the trial sponsor, indemnity of relevant parties, scrutiny of the trial conduct, trial registration, and reporting and publication of the results. Conclusion Nurse-led trials of medical devices are demanding but rewarding research enterprises. As nursing practice and research increasingly embrace technical interventions, it is vital that nurse researchers contemplating such trials understand and implement the principles of Good Clinical Practice to protect both study participants and the research team.

Reorganizing a technical services division using collaborative evidence based information practice at Auraria Library

The article focuses on the evidence-based information practice (EBIP) applied at the Auraria Library in Denver, Colorado during the reorganization of its technical services division. Collaboration processes were established for the technical services division through the reorganization and redefinition of workflows. There are several factors that form part of the redefinition of roles including personal interests, department needs, and library needs. A collaborative EBIP environment was created in the division by addressing issues of workplace hierarchies, by the distribution of problem solving, and by the encouragement of reflective dialogue.

Future Information Communication Technology and Applications : ICFICE 2013

Focuses on the various aspects of advances in future information communication technology and its applications Presents the latest issues and progress in the area of future information communication technology Applicable to both researchers and professionals These proceedings are based on the 2013 International Conference on Future Information & Communication Engineering (ICFICE 2013), which will be held at Shenyang in China from June 24-26, 2013. The conference is open to all over the world, and participation from Asia-Pacific region is particularly encouraged. The focus of this conference is on all technical aspects of electronics, information, and communications ICFICE-13 will provide an opportunity for academic and industry professionals to discuss the latest issues and progress in the area of FICE. In addition, the conference will publish high quality papers which are closely related to the various theories and practical applications in FICE. Furthermore, we expect that the conference and its publications will be a trigger for further related research and technology improvements in this important subject. "This work was supported by the NIPA (National IT Industry Promotion Agency) of Korea Grant funded by the Korean Government (Ministry of Science, ICT & Future Planning)."

Calibration of the electron volt spectrometer, a deep inelastic neutron scattering spectrometer at the ISIS pulsed neutron spallation source

The electron Volt Spectrometer (eVS) is an inverse geometry filter difference spectrometer that has been optimised to measure the single atom properties of condensed matter systems using a technique known as Neutron Compton Scattering (NCS) or Deep Inelastic Neutron Scattering (DINS). The spectrometer utilises the high flux of epithermal neutrons that are produced by the ISIS neutron spallation source enabling the direct measurement of atomic momentum distributions and ground state kinetic energies. In this paper the procedure that is used to calibrate the spectrometer is described. This includes details of the method used to determine detector positions and neutron flight path lengths as well as the determination of the instrument resolution. Examples of measurements on 3 different samples are shown, ZrH2, 4He and Sn which show the self-consistency of the calibration procedure.

Crisis response planning in tunnel and road networks

Critical road infrastructure (such as tunnels and overpasses) is of major significance to society and constitutes major components of interdependent, ‘systems and networks’. Failure in critical components of these wide area infrastructure systems can often result in cascading disturbances with secondary and tertiary impacts - some of which may become initiating sources of failure in their own right, triggering further systems failures across wider networks. Perrow1) considered the impact of our increasing use of technology in high-risk fields, analysing the implications on everyday life and argued that designers of these types of infrastructure systems cannot predict every possible failure scenario nor create perfect contingency plans for operators. Challenges exist for transport system operators in the conceptualisation and implementation of response and subsequent recovery planning for significant events. Disturbances can vary from reduced traffic flow causing traffic congestion throughout the local road network(s) and subsequent possible loss of income to businesses and industry to a major incident causing loss of life or complete loss of an asset. Many organisations and institutions, despite increasing recognition of the effects of crisis events, are not adequately prepared to manage crises2). It is argued that operators of land transport infrastructure are in a similar category of readiness given the recent instances of failures in road tunnels. These unexpected infrastructure failures, and their ultimately identified causes, suggest there is significant room for improvement. As a result, risk profiles for road transport systems are often complex due to the human behaviours and the inter-mix of technical and organisational components and the managerial coverage needed for the socio-technical components and the physical infrastructure. In this sense, the span of managerial oversight may require new approaches to asset management that combines the notion of risk and continuity management. This paper examines challenges in the planning of response and recovery practices of owner/operators of transport systems (above and below ground) in Australia covering: • Ageing or established infrastructure; and • New-build infrastructure. With reference to relevant international contexts this paper seeks to suggest options for enhancing the planning and practice for crisis response in these transport networks and as a result support the resilience of Critical Infrastructure.

Partnerships to promote school to work transitions : evidence from the field

Internationally, vocational education and training (VET) is challenged by increasing skills shortages in certain industries and rapidly changing skill requirements. Rigid and centralised state bureaucracies have proven inadequate to adapt to these challenges. Increasingly, partnerships between schools and industry have been established as a potential strategy to address local labour market demand and to provide school to work transition programs. Drawing on experiences in Australia, this paper reports on a case study of government-let partnerships between schools and industry. The Queensland Gateway schools initiative currently involves over 120 schools. The study aimed to understand how partnerships were constructed in this initiative. Selected partnerships were analysed in terms of the following principles of public-private partnerships – efficiency, effectiveness, sustainability, and beneficiaries. Although there are some benefits of partnership activities reported by both school and industry stakeholders, little evidence was found that the above underlying principles had been addressed to a significant extent in the Gateway school initiative. Further, these partnerships are often tenuously facilitated by individuals who have limited infrastructure or strategic support. Implications are that project stakeholders have not sufficiently accommodated theoretical perspectives on implementation and management of partnerships. Similar initiatives may be improved if stakeholders are cognisant of the underlying principles supporting successful public-private partnerships.

Exploring empathy as a variable in the evaluation of professional development programmes for palliative care nurses

Research indicates that empathy, a quality regarded as fundamentally important to nursing practice, is a teachable skill. Because empathic nurse-patient relationships are particularly important in the care of the terminally ill, this has direct relevance to the professional development of palliative care nurses. This article discusses the place of empathy as a criterion variable in the evaluation of a professional development program for palliative care nurses introduced at the Centre for Mental Health Nursing Research at Queensland University of Technology, Brisbane, Australia. A modified version of the Staff-Patient Interaction Response Scale (SPIRS) was used as a pre- and postintervention measure to assess the expressed empathy of the participating nurses. The modifications to SPIR and its coding system to make it suitable for palliative care nursing, and the mechanisms for improving and evaluating the reliability of this instrument will be discussed. The full description of this particular modification of SPIRS for palliative care research is provided as an example of how this instrument could be used in projects for which nurses undertake the difficult task of providing compassionate care to the terminally ill.

Design of a professional development programme for palliative care nurses (Part Two)

Yates et al (1996) provided a review of the literature on educational approaches to improving psychosocial care of terminally ill patients and their families and suggested that there was an urgent need for innovation in this area. A programme of professional development currently being offered to 181 palliative care nurses in Queensland, Australia, was also described. This paper presents research in progress evaluating this programme which involves use of a quasi-experimental pre-post test design. It also includes process and outcome measures to assess effectiveness in improving the participant's ability to provide psychosocial care to patients and families. Research examining the effectiveness of various educational programmes on care of the dying has offered equivocal results (Yates et al 1996). Degner and Gow (1988a) noted that the inconsistencies found in research into death education result from inadequate study designs, variations in the conceptualisation and measurement of the outcomes of the programmes and flaws in data analysis. Such studies have often lacked a theoretical basis, few have employed well-controlled experimental designs, and the programme outcomes have generally been limited to the participant's 'death anxiety', or other death attitudes which have been variously defined and measured. Whilst Degner and Gow (1988b) have reported that undergraduate nursing students who participated in a care of the dying educational programme demonstrated more 'approach caring' behaviours than a control group, the impact of education programmes on patient care has rarely been examined. Failure to link education to nursing practice and subsequent clinical outcomes has, however, been seen as a major limitation of nursing knowledge in this area (Degner et al 1991). This paper describes an approach to researching the effectiveness of professional development programmes for palliative care nurses.