Preparação de um material de referência certificado para controle de agrotóxicos em hortifrutigranjeiros: estudo da homogeneidade

Neste trabalho são apresentados os esforços para garantir a homogeneidade de um material de referência. Níveis residuais (mg.kg-1) de quatro agrotóxicos (γ-HCH, fenitrotiona, clorpirifós e procimidona) foram adicionados à polpa de tomate com o objetivo de se preparar um material de referência certificado. As propriedades mais importantes desses materiais são a homogeneidade e a estabilidade. Antes de serem enviados a outros laboratórios, os materiais de referência precisam ter sua homogeneidade verificada. Nas etapas prévias, amostras foram avaliadas de modo a prover dados sobre o tratamento mais adequado para minimizar a variabilidade analítica do lote preparado e garantir a qualidade da amostra candidata a material de referência certificado, tão bem como a estimativa da incerteza associada à homogeneidade. A análise de variância fornece informações sobre a variabilidade do lote preparado e o grau de invariabilidade da amostra fortificada. Depois da preparação, as amostras foram expostas à radiação gama na dose de 2 kGy e submetidas a um estudo interlaboratorial para certificação. As concentrações certificadas dos agrotóxicos após caracterização foram 0,191 ± 0,047 mg.kg-1; 0,192 ± 0,068 mg.kg-1; 0,225 ± 0,076 mg.kg-1e 0,177 ± 0,051 mg.kg-1 para o γ-HCH, a fenitrotiona, clorpirifós e procimidona respectivamente.

Preparação de um material de referência certificado para controle de agrotóxicos em hortifrutigranjeiros: estudo da estabilidade

Neste trabalho são apresentados os resultados dos estudos de estabilidade referentes à produção de um material de referência certificado. Foram avaliados níveis residuais de concentração dos agrotóxicos γ-HCH, fenitrotiona, clorpirifós e procimidona em polpa de tomate. A pasteurização e a irradiação gama foram empregadas à polpa de tomate, visando manter a integridade da amostra candidata a material de referência. A polpa foi preparada e dividida em duas partes. Cada parte foi fortificada com os referidos agrotóxicos na faixa de concentração de 0,1 a 0,2 mg.kg-1. Uma das partes foi submetida à pasteurização a 90 °C por 4 minutos e a outra parte foi irradiada com dose de 2,0 kGy depois de homogeneizada. A estabilidade e a incerteza da amostra, correspondente ao período de tempo avaliado, foram determinadas através da análise de regressão em conjunto com a ANOVA. Os resultados indicaram que ambos os procedimentos de preparo da amostra são adequados para a conservação da polpa de tomate fortificada com os quatro agrotóxicos, com vantagem para o tratamento por irradiação com a dose de 2,0 kGy.

Microparticles obtained by complex coacervation: influence of the type of reticulation and the drying process on the release of the core material

Microparticles obtained by complex coacervation were crosslinked with glutaraldehyde or with transglutaminase and dried using freeze drying or spray drying. Moist samples presented Encapsulation Efficiency (%EE) higher than 96%. The mean diameters ranged from 43.7 ± 3.4 to 96.4 ± 10.3 µm for moist samples, from 38.1 ± 5.36 to 65.2 ± 16.1 µm for dried samples, and from 62.5 ± 7.5 to 106.9 ± 26.1 µm for rehydrated microparticles. The integrity of the particles without crosslinking was maintained when freeze drying was used. After spray drying, only crosslinked samples were able to maintain the wall integrity. Microparticles had a round shape and in the case of dried samples rugged walls apparently without cracks were observed. Core distribution inside the particles was multinuclear and homogeneous and core release was evaluated using anhydrous ethanol. Moist particles crosslinked with glutaraldehyde at the concentration of 1.0 mM.g-1 protein (ptn), were more efficient with respect to the core retention compared to 0.1 mM.g-1 ptn or those crosslinked with transglutaminase (10 U.g-1 ptn). The drying processes had a strong influence on the core release profile reducing the amount released to all dry samples

Interdependence of Macroeconomics Variables, Stock Market Returns and Stock Market Volatility in Latin America

This thesis examines the interdependence of macroeconomic variables, stock market returns and stock market volatility in Latin America between 2000 and 2015. Argentina, Brazil, Chile, Colombia, Mexico and Peru were chosen as the sample markets, while inflation, interest rate, exchange rate, money supply, oil and gold were chosen as the sample macroeconomic variables. Bivariate VAR (1) model was applied to examine the mean return spillovers between the variables, whereas GARCH (1, 1) – BEKK model was applied to capture the volatility spillovers. The sample was divided into two smaller sub-periods, where the first sub-period covers from 2000 to 2007, and the second sub-period covers from 2007 to 2015. The empirical results report significant shock transmissions and volatility spillovers between inflation, interest rate, exchange rate, money supply, gold, oil and the selected markets, which suggests interdependence between the variables.

TAKING ADVANTAGE OF THE LOCAL ADVANTAGE? - Investment value of the analyst local advantage in the Finnish stock market in 2006–2014

An investor can either conduct independent analysis or rely on the analyses of others. Stock analysts provide markets with expectations regarding particular securities. However, analysts have different capabilities and resources, of which investors are seldom cognizant. The local advantage refers to the advantage stemming from cultural or geographical proximity to securities analyzed. The research has confirmed that local agents are generally more accurate or produce excess returns. This thesis tests the investment value of the local advantage regarding Finnish stocks via target price data. The empirical section investigates the local advantage from several aspects. It is discovered that local analysts were more focused on certain sectors generally located close to consumer markets. Market reactions to target price revisions were generally insignificant with the exception to local positive target prices. Both local and foreign target prices were overly optimistic and exhibited signs of herding. Neither group could be identified as a leader or follower of new information. Additionally, foreign price change expectations were more in line with the quantitative models and ideas such as beta or return mean reversion. The locals were more accurate than foreign analysts in 5 out of 9 sectors and vice versa in one. These sectors were somewhat in line with coverage decisions and buttressed the idea of local advantage stemming from proximity to markets, not to headquarters. The accuracy advantage was dependent on sample years and on the measure used. Local analysts ranked magnitudes of price changes more accurately in optimistic and foreign analysts in pessimistic target prices. Directional accuracy of both groups was under 50% and target prices held no linear predictive power. Investment value of target prices were tested by forming mean-variance efficient portfolios. Parallel to differing accuracies in the levels of expectations foreign portfolio performed better when short sales were allowed and local better when disallowed. Both local and non-local portfolios performed worse than a passive index fund, albeit not statistically significantly. This was in line with previously reported low overall accuracy and different accuracy profiles. Refraining from estimating individual stock returns altogether produced statistically significantly higher Sharpe ratios compared to local or foreign portfolios. The proposed method of testing the investment value of target prices of different groups suffered from some inconsistencies. Nevertheless, these results are of interest to investors seeking the advice of security analysts.

Presence of central nervous system tissues as bovine spongiform encephalopathy specified risk material in Turkish raw meat ball (cig kofte)

Abstract Bovine Spongiform Encephalopathy (BSE) is a virulent disease which may infect by affecting the central nervous system (CNS) tissues in cattle and causes degeneration in nerves. Central nervous system tissues such as brain and spinal cord which are classified as specified risk materials (SRMs) are regarded to be main source of infection. The contamination of the meat with the specific risk materials (SRMs) can occur in phases of slaughter, fragmentation of carcass and processing. This study was conducted in order to investigate the existence of CNS tissues in raw meat ball (cig kofte) which is commonly consumed in the Southeastern Region of Turkey, particularly in Şanlıurfa. For this purpose, 145 samples of raw meat ball were tested. The enzyme-linked immunosorbent assay (ELISA) kits (Ridascreen risk material 10/5, R-biofarm GmbH) which determine glial fibrillary acidic protein (GFAP) as determinant were used. As a result of the analyses, positivity was detected in 21 of totally 145 samples of raw meat ball (14.48%). 6 (4.14%) of the samples gave low level of positivity (≥ 0.1 standard absorbance), 10 (6.90%) gave medium level of positivity (>0.2 standard absorbance) and 5 (3.45%) gave high level of positivity (≥0.5 standard absorbance). As a consequence, meats are contaminated in any phase of both slaughter and meat production even if accidentally. Regarding this matter, necessary measures should be taken and hygiene rules should be applied.

Simulation and material calibration of ultra high strength steel (UHSS) S960 welded joint under static tensile test utilizing finite element method (FEM)

The aim of this work was to calibrate the material properties including strength and strain values for different material zones of ultra-high strength steel (UHSS) welded joints under monotonic static loading. The UHSS is heat sensitive and softens by heat due to welding, the affected zone is heat affected zone (HAZ). In this regard, cylindrical specimens were cut out from welded joints of Strenx® 960 MC and Strenx® Tube 960 MH, were examined by tensile test. The hardness values of specimens’ cross section were measured. Using correlations between hardness and strength, initial material properties were obtained. The same size specimen with different zones of material same as real specimen were created and defined in finite element method (FEM) software with commercial brand Abaqus 6.14-1. The loading and boundary conditions were defined considering tensile test values. Using initial material properties made of hardness-strength correlations (true stress-strain values) as Abaqus main input, FEM is utilized to simulate the tensile test process. By comparing FEM Abaqus results with measured results of tensile test, initial material properties will be revised and reused as software input to be fully calibrated in such a way that FEM results and tensile test results deviate minimum. Two type of different S960 were used including 960 MC plates, and structural hollow section 960 MH X-joint. The joint is welded by BöhlerTM X96 filler material. In welded joints, typically the following zones appear: Weld (WEL), Heat affected zone (HAZ) coarse grained (HCG) and fine grained (HFG), annealed zone, and base material (BaM). Results showed that: The HAZ zone is softened due to heat input while welding. For all the specimens, the softened zone’s strength is decreased and makes it a weakest zone where fracture happens while loading. Stress concentration of a notched specimen can represent the properties of notched zone. The load-displacement diagram from FEM modeling matches with the experiments by the calibrated material properties by compromising two correlations of hardness and strength.

Palveluvaraston käyttöönotto kokoonpanoteollisuudessa

Tutkimuksen tavoitteena oli selvittää palveluvarastoinnin vaikutukset hankinnan kokonaiskustannuksiin ja luoda palveluvaraston toimintakonsepti. Toimintakonsepti pitää sisällään informaatio- ja materiaalivirtojen hallinta- ja ohjausprosessit toimittajan, palveluvaraston ja diplomityön kohdeyrityksen välillä. Tutkimuksen alussa tehtiin kustannusvertailu kahden vaihtoehtoisen toimittajan välillä. Toinen vaihtoehdoista edellyttää välivarastointia palveluvarastossa. Kustannusvertailun pohjalta kohdeyrityksessä päätettiin vaihtaa toimittajaa ja ottaa käyttöön palveluvarasto. Palveluvaraston toimintakonseptin luomista varten yrityksessä perustettiin projektiryhmä. Tutkimuksen kirjoittaja toimi projektiryhmän vetäjänä. Tutkimuksessa luotiin palveluvaraston toimintakonsepti, joka perustuu vendor- managed inventory-toimintamalliin. VMI-toimintaa varten kehitettiin ohjausraportti, jonka avulla kohdeyritys voi valvoa varastotasoja palveluvarastossa, ja jonka avulla toimittajat ohjaavat varastotäydennyksiä palveluvarastolle. Palveluvaraston ja kohdeyrityksen välille luotiin lisäksi RFID-teknologiaa hyödyntävä tilausprosessi. Kohdeyrityksessä voidaan tulevaisuudessa hyödyntää palveluvarastoa kansainvälisen hankinnan logistiikan hallintaan.