Caracterização cromatográfica de moléculas bioativas em frutos silvestres de Fragaria vesca L.

Fragaria vesca L., morango silvestre, pertence à família das Rosaceae e é comumente encontrada nas bermas e taludes [1]. Os seus frutos pequenos e de sabor doce podem ser consumidos em fresco como uma fonte de vitamina C, ou em infusões muito utilizadas no tratamento de vários transtornos intestinais [2]. No presente trabalho, os frutos de F. vesca silvestre foram caracterizados em termos de valor nutricional (hidratos de carbono, proteínas, gordura, cinzas e valor energético), teor em fibra alimentar e perfil em ácidos gordos. Para além disso, os frutos e respetivas infusões foram também caracterizados pelo seu conteúdo em açúcares solúveis, ácidos orgânicos, folatos e tocoferóis por técnicas de HPLC acoplada a detectores de índice de refração, fotodíodos e fluorescência, respetivamente, e também pela sua composição mineral avaliada por espectroscopia de absorção atómica. Os hidratos de carbono foram os macronutrientes maioritários nos frutos, seguidos pela gordura total, cinzas e proteínas. Também demonstraram teores elevados em fibra alimentar, maioritariamente fibra solúvel. Os ácidos linolénico (C18:3n3) e γ-linolénico (C18:3n6) foram os ácidos gordos maioritários, havendo uma prevalência de ácidos gordos polinsaturados. Os frutos e as respetivas infusões apresentaram sacarose, seguida da frutose, como sendo os açúcares maioritários. O ácido cítrico foi o ácido orgânico mais abundante em ambas as amostras, enquanto os ácidos oxálico e ascórbico foram detetados nas infusões em concentrações vestigiais. Em termos de microelementos, o manganês foi o mais abundante em ambas as amostras; o potássio e o cálcio foram os macroelementos maioritários encontrados nos frutos e nas suas infusões, respetivamente. Em termos de vitaminas, ambas as amostras apresentaram folatos (vitamina B9) e tocoferóis (vitamina E), sendo o γ-tocoferol a isoforma mais abundante, seguido de α-tocoferol. É de referir que nas infusões foi somente encontrada a isoforma de α-tocoferol. Apesar dos frutos de F. vesca silvestre serem normalmente consumidos em fresco, este estudo prova a potencialidade das suas infusões como uma fonte de moléculas bioativas.

Influência da radiação por feixe de eletrões no perfil cromatográfico de Bauhinia variegata var candida: flor comestível proveniente do brasil

As flores de Bauhinia variegata var candida apresentam coloração branca e são vulgarmente conhecidas como “patas de vaca branca”, sendo muito utilizadas na cozinha gourmet como forma de aumentar a qualidade sensorial e nutricional dos alimentos [1,2]. No presente estudo, as flores foram submetidas a radiação por feixe de eletrões em diferentes doses (0,5 e 0,8 kGy) como forma de descontaminação, e seguidamente analisadas em termos de parâmetros nutricionais (humidade, proteínas, gordura, hidratos de carbono e cinzas) e perfis em açúcares livres (HPLCRI), ácidos gordos (GC-FID), tocoferóis (HPLC-Fluorescência) e ácidos orgânicos (HPLC-DAD). As amostras não irradiadas e irradiadas mostraram um perfil nutricional semelhante, sendo os hidratos de carbono os nutrientes mais abundantes, seguidos das proteínas, gorduras e cinzas. Os perfis em açúcares foram também similares, estando presente a frutose em maior quantidade, seguida da glucose e da sacarose. Os ácidos mirístico (C14:0), palmítico (C16:0), esteárico (C18:0) e oleico (C18:1n9), foram os ácidos gordos mais abundantes. Os ácidos gordos saturados (SFA) foram os mais abundantes, seguidos dos mono (MUFA) e polinsaturados (PUFA). Neste caso, com maior dose de radiação verificou-se que a percentagem de SFA e MUFA diminui ligeiramente (principalmente pelo aumento dos ácidos esteárico e oleico, respetivamente), aumentando a percentagem de PUFA (principalmente pelo aumento dos ácidos linoleico e α-linolénico). No que respeita aos tocoferóis, só a isoforma α foi encontrada, apresentando aproximadamente o mesmo conteúdo nas amostras irradiadas e não irradiadas (1,75±0,06 mg/mL). O ácido cítrico foi o ácido orgânico mais abundante nas amostras, seguido dos ácidos: málico, ascórbico, oxálico e fumárico. Também neste caso os valores mantiveram-se, com exceção do ácido cítrico que aumentou ligeiramente com as doses de irradiação (55,94, 61,70 e 67,64 mg/mL, respetivamente). Em síntese, verificou-se que as doses de irradiação aplicadas não alteraram significativamente a composição química das amostras em estudo, e pode ser considerada uma técnica de descontaminação e preservação de flores comestíveis.

Dispersão de sementes por aves na galeria ripícola e matriz envolvente

As galerias ripícolas são habitats com uma grande disponibilidade de recursos alimentares e abrigo para a fauna, estando entre os habitats mais importantes e vulneráveis do mundo. São uma fonte de produção de frutos, o que atrai muitos animais, como as aves frugívoras, que são os principais dispersores de sementes na bacia do Mediterrâneo. O objetivo principal deste estudo foi estudar os padrões de dispersão de sementes por aves na interface galeria ripícola-matriz florestal envolvente (Montado). Foram marcadas com fluorescência plantas-mãe produtoras de frutos, e utilizadas armadilhas para sementes e transectos, para a recolha dos dejetos de aves onde, posteriormente, se detetaram as sementes dispersadas. Constatou-se que a dispersão de sementes e a abundância de plantas-mãe foi superior a distâncias mais próximas da ribeira, diminuindo à medida que esta distância aumenta. A espécie mais dispersada foi Smilax aspera e as espécies com sementes de menor dimensão, foram dispersadas a uma maior distância da planta-mãe, provavelmente devido a este tipo de sementes permanecerem mais tempo no trato intestinal das aves. Os resultados deste estudo apresentam algumas implicações para a colonização da matriz adjacente por plantas produtoras de frutos; ABSTRACT: Riparian galleries are habitats with a large availability food resources and shelter for animals, being among the most important and vulnerable habitats in the world. These zones are a great source of fruits attracting many animals, such as frugivorous birds, which are the main seed dispersers in the Mediterranean basin. The objective of this thesis is the study of seed dispersal patterns by birds, in the riparian gallery and in the surrounding forest matrix (Montado). Fruits of several plant species were used to collect bird droppings and detect fluorescent seeds in those droppings. Fruit abundance and seed dispersal were higher close to the stream, and decreased rapidly with an increase in distance from the stream. From all species, the most dispersed was Smilax aspera and species with smaller seed were found at a significantly larger distance from parents plants than species with large seeds. This can be explained by the fact that smaller seed stay longer in the intestinal tract of the birds. The results of this study present some implications for the colonization of freshly fruit plants from the riparian gallery into the adjacent matrix.

Frutos biológicos de Vaccinum myrtillus L. na base de novos produtos enriquecidos: caracterização química e nutricional

Vaccinum myrtillus L. pertence à família Ericaceae, sendo comumente conhecida pelos seus pequenos frutos e doces: os mirtilos. Largamente consumidos em fresco, estes frutos também são usados em compotas e marmeladas, devido à suas propriedades digestivas e hipoglicémicas bem como, devido à presença de vários compostos bioativos [1]. Portanto, tornou-se uma matriz muito apelativa para o desenvolvimento de novos produtos funcionais que, para além das suas propriedades nutricionais, adicionam um efeito benéfico fisiológico e para a saúde de longo prazo [2]. No presente trabalho, três novos produtos desenvolvidos pela RBR Foods Company (Portugal) tendo como base o mirtilo, foram caracterizados pelas suas propriedades nutricionais e químicas: hidratos de carbono, cinzas, proteínas, gordura e valor energético (seguindo métodos oficiais de análise de alimentos AOAC), perfil de ácidos gordos (por GC-FID), açúcares solúveis (por HPLC-RI), ácidos orgânicos (por HPLC-DAD) e tocoferóis (por HPLC de fluorescência). Os produtos resultam de uma mistura dos frutos com pétalas de rosa (P1), pétalas de calêndula (P2) e bagas goji e maçã (P3). Os frutos de mirtilo foram utilizados como amostra de controlo. O perfil nutricional dos novos produtos mostrou-se muito semelhante ao da amostra controlo: os hidratos de carbono foram os macronutrientes mais abundantes, seguido de proteínas e de gordura total. Em relação aos açúcares, frutose, glucose e sacarose foram identificados em todas as amostras. P1 e P2 não apresentaram diferenças significativas em relação ao controlo, no entanto, P3 revelou uma menor concentração de açúcares. Em termos de composição de ácidos gordos, todas as amostras estudadas apresentaram maiores teores em ácidos gordos polinsaturados, especialmente devido à contribuição dos ácidos linoléico e alfa-linolénico. Os resultados de tocoferóis revelaram que a amostra controlo apresentou apenas duas isoformas de tocoferóis, α- e γ-tocoferol, sendo a mesmo observado em P3. No entanto, P1 revelou a presença de todas as isoformas de tocoferóis, enquanto P2 não apresentaou δ-tocoferol; Estes resultados estão relacionados com a contribuição das pétalas de rosa e calêndula, respetivamente. A isoforma α-tocoferol foi a mais abundante em todas as amostras estudadas. Em geral, este trabalho contribuiu para a caracterização de novos produtos nutricionais com base de mirtilo sendo parte de um projecto mais abrangente que tem por objetivo o estudo detalhado destes produtos, para serem utilizados como alimentos funcionais.

Análise da estabilidade genética de células-tronco mesenquimais humanas

Human multipotent mesenchymal stromal cells (MSCs), also known as mesenchymal stem cells, have become an important and attractive therapeutic tool since they are easily isolated and cultured, have in vitro expansion potential, substantial plasticity and secrete bioactive molecules that exert trophic effects. The human umbilical cord as a cell source for cell therapy will help to avoid several ethical, political, religious and technical issues. One of the main issues with SC lines from different sources, mainly those of embryonic origin, is the possibility of chromosomal alterations and genomic instability during in vitro expansion. Cells isolated from one umbilical cord exhibited a rare balanced paracentric inversion, likely a cytogenetic constitutional alteration, karyotype: 46,XY,inv(3)(p13p25~26). Important genes related to cancer predisposition and others involved in DNA repair are located in 3p25~26. Titanium is an excellent biomaterial for bone-implant integration; however, the use can result in the generation of particulate debris that can accumulate in the tissues adjacent to the prosthesis, in the local bone marrow, in the lymph nodes, liver and spleen. Subsequently may elicit important biological responses that aren´t well studied. In this work, we have studied the genetic stability of MSC isolated from the umbilical cord vein during in vitro expansion, after the cryopreservation, and under different concentrations and time of exposition to titanium microparticles. Cells were isolated, in vitro expanded, demonstrated capacity for osteogenic, adipogenic and chondrogenic differentiation and were evaluated using flow cytometry, so they met the minimum requirements for characterization as MSCs. The cells were expanded under different concentrations and time of exposition to titanium microparticles. The genetic stability of MSCs was assessed by cytogenetic analysis, fluorescence in situ hybridization (FISH) and analysis of micronucleus and other nuclear alterations (CBMN). The cells were able to internalize the titanium microparticles, but MSCs preserve their morphology, differentiation capacity and surface marker expression profiles. Furthermore, there was an increase in the genomic instability after long time of in vitro expansion, and this instability was greater when cells were exposed to high doses of titanium microparticles that induced oxidative stress. It is necessary always assess the risks/ benefits of using titanium in tissue therapy involving MSCs, considering the biosafety of the use of bone regeneration using titanium and MSCs. Even without using titanium, it is important that the therapeutic use of such cells is based on analyzes that ensure quality, security and cellular stability, with the standardization of quality control programs appropriate. In conclusion, it is suggested that cytogenetic analysis, FISH analysis and the micronucleus and other nuclear alterations are carried out in CTMH before implanting in a patient

Avaliação da dolomita funcionalizada para remoção de H2S em gás natural

The natural gas is an alternative source of energy which is found underground in porous and permeable rocks and being associated or not to the oil. Its basic composition includes methane, other hydrocarbon and compounds such as carbon dioxide, nitrogen, sulphidric gas, mercaptans, water and solid particles. In this work, the dolomite mineral, a double carbonate of calcium and magnesium whose the chemical formula is CaMg(CO3)2, was evaluated as adsorbent material. The material was characterized by granulometric analysis, X-ray fluorescence, X-ray diffraction, thermogravimetric analysis, differential thermal analysis, specific surface area, porosity, scanning electronic microscopy and infrared spectroscopy. Then the material was functionalized with diethanolamine (dolomite+diethanolamine) and diisopropylamine (dolomite+diisopropylamine). The results indicated that the adsorbents presented appropriate physiochemical characteristics for H2S adsorption. The adsorption tests were accomplished in a system coupled to a gas chromatograph and the H2S monitoring in the output of the system was accomplished by a pulsed flame photometric detector (PFPD). The adsorbents presented a significant adsorption capacity. Among the analyzed adsorbents, the dolomite+diethanolamine presented the best capacity of adsorption. The breakthrough curves obtained proved the efficiency of this process

Desenvolvimento de formulações para produção de grés porcelanato a partir de matérias-primas da região da bacia do Parnaíba

Brazil is a great ceramic raw materials productor because of the its big number of clay deposits, in various areas of the ceramic industry. Although, the majority of the natural reservations are unknown or not studied yet, so there is no scientific technical dates that can guide their usage and industrial application, as well as the racional and optimazed way of usage by the industrial sector. The state of Maranhão has a gigant mineral wealth as esmectite, bentonite, kaolin, clays, feldspates, marine salt, iron and others, but produce only products with small agregated value compared to the porcelanato, one of the most expensives ceramic cover tiles, the reason for that is the low water absorption (lower than 0,5%), beside present amazing tecnicals features, like mechanical resistence. The main objective of the work is to do the characterization of four clays, with the finallity of find an application by the results and develop formulations to produce porcelanato using these raw materials from Timon-MA. For this were made the raw materials characterization using X ray fluorecence; X ray diffraction; Differencial thermal analysis; Dilatometric analysis and Tecnological properties, planing three formulations that were sinterized at six different temperatures: 1150, 1170, 1190, 1210, 1230 and 1250ºC for 7 minutes. After the sinteratization, the samples were submitted to tension resistance analysis. Were attained two formulations with the requested properties to produce porcelanato

Formulação e caracterização de matérias-primas para revestimento cerâmico Semi-Poroso com adição de chamote de telhas

The ceramics industry in Piauí is nowadays with 55 industries where 11 are in Teresina which is the mainstream of the state, producing 55 million shingles; in which 10 % is of this production is wasted being sometimes thrown on the margins of rivers, roads and highways provoking an environmental degradation. The main goal of this work is to verify the potential of producing semi porous ceramic using grog of shingles, on the first part of this work bodies-of-proof were produced from a basic formula of an industry, doping it with 5 %, 10 %, 15 % and 20 % in mass and in the second part of this work some bodies-of-proof were produced from a formula where one raw material was substituted by 50 % of grog and another substituting it all by grog, bodies-of-proof made of a basic formula previously announced was used for experiment control.The grog and the raw materials were characterized by: particle size analysis , thermal differential analysis, X ray diffraction , X ray fluorescence, an thermal gravimetric analysis and rational analyses. The bodies-of-proof were sintetisized in an industrial oven obeying the normal cycle adopted by an industry, with peak temperatures of 1135 oC and a fast burning cycle of 25 minutes having as energetic fuel liquefied petroleum gas . The pieces that were obtained by this were submersed in rehearsed physics of: water absorption of, apparent specific mass, apparent porosity, lineal retraction, rupture tension to the flexural and dilatometry; mineralogical analysis for X ray diffraction; and microstructural for electronic microscope of sweeping. For all the formulas with addition of grog, superior priorities to the requested by the requirements for semi porous and for the formula to F2-2,5 superior priorities to standard formulas which justifies the incorporation of the shingles in mass for the semi porous ceramic

Influência da gipsita no surgimento de eflorescência em telhas cerâmicas

The red ceramic industry is recognized as of major importance in Piauí State. The State capital, Teresina, is the greatest producer of this material ( production about 18 million peaces), which is used mainly for masonry sealing blocks. One of the most frequent problems in this kind of products is the efflorescence. This work has the main objective of studying the influence of gypsum addition on non-glazed tiles, by using the local industry production standards. The raw materials were characterized by FRX, DRX, TGA, DTA and AD. Extruded test specimens were made with the addition of 1, 3 and 5% of gypsum in the ceramic paste, burned at 850oC, 950oC and 1050oC and submitted to further technological tests and microestrutural analysis by the scanning electron microscope. In order to accelerate the aging of bodies of evidence, they were immersed in successive water baths and posterior drying. The reference ceramic paste showed tendency to efflorescence formation after drying and consolidated efflorescence after burning, but no affecting the technological results

Adição de cascalho de perfuração da bacia potiguar em argilas para uso em materiais cerâmicos: influência da concentração e temperatura de queima.

One of waste produced on large scale during the well drilling is the gravel drilling. There are techniques for the treatment of the same, but there isn t consensus on what are the best in terms of economic and environmental. One alternative for disposal of this waste and objective of this paper is the incorporation and immobilization of gravel clay matrix to assess their technological properties. The Raw Materials used were characterized by the following techniques: Chemical Analysis by X-ray fluorescence (XRF), mineralogical analysis by X-ray Diffraction (XRD), Grain Size Analysis (FA) and Thermal Analysis by Thermogravimetry (TG) and thermodiferential (DTA). After characterizing, samples were formulated in the following percentages: 0, 5, 10, 15, 25, 50, 75, 100% (weight) of gravel drilling, then the pieces were pressed, dried (110 ° C) and sintered at temperatures of 850, 950 and 1050 ° C. After sintering, samples were tested for water absorption, linear shrinkage, flexural strength, porosity, density, XRD and test color. The results concluded that the incorporation of gravel drilling is a viable possibility for solid masonry bricks and ceramic blocks manufacture at concentrations and firing temperature described here. Residue incorporation reduces an environmental problem, the cost of raw materials for manufacture of ceramic products

Estudo sobre a influência do massará no processo de formação de salitre em rebocos na região de Teresina - PI

This work had to verify the influence of massará, while mortar component, in the process of formation of saltpeter in cementitious plaster walls of buildings. The massará is a ceramic material, texture areno usually found in large volumes argillaceous sediments in Teresina, Piaui State capital, which is associated with the Portland cement mortar form for fixing and finishing in construction. Saltpeter or flowering is a pathology that happens in gypsum wallboard, which invariably reaction between soluble salts present in materials, water and oxygen. This pathology, supposedly credited to massará caused its use to suffer significant reduction in the market of the buildings. Verify this situation with particular scientific rigor is part of the proposal of this work. Grading tests Were performed, consistency limits (LL, LP and IP), determination of potential hydrogen, capacity Exchange (CTC), electrical conductivity (EC), x-ray fluorescence (FRX) and x-ray diffraction (DRX). Massará analysed samples in number six, including sample plastering salitrado presented potential hydrogen medium 5.7 in water and 5.2 on KCl n and electrical conductivity (EC), equal to zero. These results pointed to the affirmative that massará is a material that does not provide salinity content that can be taken into consideration. It is therefore concluded that the material analyzed not competing, at least with respect to the presence of soluble salts, for the formation of saltpeter

Aproveitamento de resíduos minerais na formulação de argamassas para a construção civil

Current environmental concerns include the excessive consumption and inefficient use of non-renewable natural resources. The construction industry is considered one of the largest consumers of natural raw materials, significantly contributing to the environmental degradation of the planet. The use of calcareous quarry (RPPC) and porcelain tile polishing residues (RPP) as partial replacements of the cement in mortars is an interesting alternative to minimize the exploration of considerably large amounts of natural resources. The present study aimed at investigating the properties of fresh and hardened mortars produced using residues to replace cement. The residues used were fully characterized to determine their specific mass, unitary mass, particle size distribution and morphology, and composition. The performance of the mortars was compared to that of reference compositions, prepared without residues. A total of 18 compositions were prepared, 16 using residues and 2 reference ones. The mortars were prepared using Portland CP II F 32 cement, CH I hydrated lime, river sand and tap water. The compositions of the mortars were 1:1:6 and 1:0.5:4.5 (vol%), and water to cement ratios of 1.87 and 1.45 were used, respectively. The mortars in the fresh state were evaluated by consistency index, water retention, density of mass and incorporated air content tests. In their hardened state, the mortars were evaluated by apparent mass density, modulus of elasticity, flexural tensile strength, compressive strength and water absorption by capillarity. The mortars were also analyzed by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and fluorescence. Finally, they were classified according to NBR 13281 standards. The mortars prepared using residues partially replacing the cement exhibited lower modulus of elasticity compared to the reference compositions, thus improving the performance in their intended use. On the downside, the water absorption by capillarity was affected by the presence of residues and both the tensile and compressive strength were reduced. However, from the overall standpoint, the replacement of cement by calcareous quarry or porcelain tile polishing residues did not result in significant changes in the properties of the mortars. Therefore, compositions containing these residues can be used in the construction industry

Síntese e impregnação de peneiras moleculares Fe MCM-41 derivada de sílica da casca do arroz

The mesoporous molecular sieves of the MCM-41 and FeMCM-41 type are considered promissory as support for metals used as catalysts in oil-based materials refine processes and as adsorbents for environmental protection proposes. In this work MCM-41 and FeMCM41 were synthesized using rice husk ash - RHA as alternative to the conventional silica source. Hydrothermal synthesis was the method chosen to prepare the materials. Pre-defined synthesis parameters were 100°C for 168 hours, later the precursor was calcinated at 550°C for 2 hours under nitrogen and air flow. The sieves containing different proportions of iron were produced by two routes: introduction of iron salt direct synthesis; and a modification post synthesis consisting in iron salt 1 % and 5% impregnation in the material followed by thermal decomposition. The molecular sieves were characterized by X ray diffraction XRD, Fourier transform infrared spectroscopy FT-IR, X ray fluorescence spectroscopy XFR, scanning electronic microscopy SEM, specific surface area using the BET method, Termogravimetry TG. The kinetic model of Flynn Wall was used with the aim of determining the apparent activation energy of the surfactant remove (CTMABr) in the MCM- 41 porous. The analysis made possible the morphology characterization, identifying the presence of hexagonal structure typical for mesoporous materials, as well as observation of the MCM41 and iron of characteristic bands.

Caracterização de atapulgita visando aplicação para reforço de materiais poloméricos

The clay mineral attapulgite is a group of hormitas, which has its structures formed by microchannels, which give superior technological properties classified the industrial clays, clays of this group has a very versatile range of applications, ranging from the drilling fluid for wells oil has applications in the pharmaceutical industry. Such properties can be improved by activating acid and / or thermal activation. The attapulgite when activated can improve by up to 5-8 times some of its properties. The clay was characterized by X-ray diffraction, fluorescence, thermogravimetric analysis, differential thermal analysis, scanning electron microscopy and transmission electron microscopy before and after chemical activation. It can be seen through the results the efficiency of chemical treatment, which modified the clay without damaging its structure, as well as production of polymer matrix composites with particles dispersed atapugita

Estudos e propriedades mecânicas de um novo tipo de bloco cerâmico híbrido para edificações em alvenarias estruturais

This dissertation presents a hybrid ceramic block the use of which reside in the buildings executed with walls. Initially, we conducted a survey on the requirements and / or norms prevailing in Brazil about structural ceramic blocks, making use of the experiences in other countries. This work seeks new materials and / or products in order to maintain or increase the compressive strength of the ceramic blocks, without neglecting the other properties. Then was collected materials (clay and crushed powder) and an approach on the characterization, through fluorescence, Mineralogy, vitrification curve and characterization of these materials used in the manufacture of the blocks by Ray Diffraction "X" and SEM. Subsequently it was made, numbered and measured dimensions of about 150 bodies of the test piece (hybrid ceramic blocks in small sizes) with varying percentages of 0%, 5%, 10% and 15% substitution of crushed clay powder. After sintering of the bodies of the test piece at temperatures of 900oC, 1000oC 1100oC and with a heating rate of 5oC/minuto and level of 1 hour, the samples were submitted to the tests (compressive strength and water absorption) and calculated their retractions, which were subsequently carried out the analysis of the results according to the criteria and parameters required by Brazilian legislation and standards in force